Why Gemfury?
Push, build, and install
RubyGems
npm packages
Python packages
Maven artifacts
PHP packages
Go Modules
Debian packages
RPM packages
NuGet packages
Repository URL to install this package:
|
Version:
3.0.0 ▾
|
{******************************************************************************}
{ }
{ NT Bug Codes API interface Unit for Object Pascal }
{ }
{ Portions created by Microsoft are Copyright (C) 1995-2001 Microsoft }
{ Corporation. All Rights Reserved. }
{ }
{ The original file is: bugcodes.h, released June 2000. The original Pascal }
{ code is: BugCodes.pas, released December 2000. The initial developer of the }
{ Pascal code is Marcel van Brakel (brakelm att chello dott nl). }
{ }
{ Portions created by Marcel van Brakel are Copyright (C) 1999-2001 }
{ Marcel van Brakel. All Rights Reserved. }
{ }
{ Obtained through: Joint Endeavour of Delphi Innovators (Project JEDI) }
{ }
{ You may retrieve the latest version of this file at the Project JEDI }
{ APILIB home page, located at http://jedi-apilib.sourceforge.net }
{ }
{ The contents of this file are used with permission, subject to the Mozilla }
{ Public License Version 1.1 (the "License"); you may not use this file except }
{ in compliance with the License. You may obtain a copy of the License at }
{ http://www.mozilla.org/MPL/MPL-1.1.html }
{ }
{ Software distributed under the License is distributed on an "AS IS" basis, }
{ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for }
{ the specific language governing rights and limitations under the License. }
{ }
{ Alternatively, the contents of this file may be used under the terms of the }
{ GNU Lesser General Public License (the "LGPL License"), in which case the }
{ provisions of the LGPL License are applicable instead of those above. }
{ If you wish to allow use of your version of this file only under the terms }
{ of the LGPL License and not to allow others to use your version of this file }
{ under the MPL, indicate your decision by deleting the provisions above and }
{ replace them with the notice and other provisions required by the LGPL }
{ License. If you do not delete the provisions above, a recipient may use }
{ your version of this file under either the MPL or the LGPL License. }
{ }
{ For more information about the LGPL: http://www.gnu.org/copyleft/lesser.html }
{ }
{******************************************************************************}
// $Id: JwaBugCodes.pas,v 1.8 2007/09/05 11:58:49 dezipaitor Exp $
{$IFNDEF JWA_OMIT_SECTIONS}
unit JwaBugCodes;
{$WEAKPACKAGEUNIT}
{$ENDIF JWA_OMIT_SECTIONS}
{$HPPEMIT ''}
{$HPPEMIT '#include "bugcodes.h"'}
{$HPPEMIT ''}
{$IFNDEF JWA_OMIT_SECTIONS}
{$I jediapilib.inc}
interface
uses
JwaWinType;
{$I jediapilib.inc}
{$ENDIF JWA_OMIT_SECTIONS}
{$IFNDEF JWA_IMPLEMENTATIONSECTION}
//
// Values are 32 bit values layed out as follows:
//
// 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
// 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
// +---+-+-+-----------------------+-------------------------------+
// |Sev|C|R| Facility | Code |
// +---+-+-+-----------------------+-------------------------------+
//
// where
//
// Sev - is the severity code
//
// 00 - Success
// 01 - Informational
// 10 - Warning
// 11 - Error
//
// C - is the Customer code flag
//
// R - is a reserved bit
//
// Facility - is the facility code
//
// Code - is the facility's status code
//
//
// Define the facility codes
//
//
// Define the severity codes
//
const
//
// MessageId: APC_INDEX_MISMATCH
//
// MessageText:
//
// APC_INDEX_MISMATCH
//
APC_INDEX_MISMATCH = ULONG($00000001);
{$EXTERNALSYM APC_INDEX_MISMATCH}
//
// MessageId: DEVICE_QUEUE_NOT_BUSY
//
// MessageText:
//
// DEVICE_QUEUE_NOT_BUSY
//
DEVICE_QUEUE_NOT_BUSY = ULONG($00000002);
{$EXTERNALSYM DEVICE_QUEUE_NOT_BUSY}
//
// MessageId: INVALID_AFFINITY_SET
//
// MessageText:
//
// INVALID_AFFINITY_SET
//
INVALID_AFFINITY_SET = ULONG($00000003);
{$EXTERNALSYM INVALID_AFFINITY_SET}
//
// MessageId: INVALID_DATA_ACCESS_TRAP
//
// MessageText:
//
// INVALID_DATA_ACCESS_TRAP
//
INVALID_DATA_ACCESS_TRAP = ULONG($00000004);
{$EXTERNALSYM INVALID_DATA_ACCESS_TRAP}
//
// MessageId: INVALID_PROCESS_ATTACH_ATTEMPT
//
// MessageText:
//
// INVALID_PROCESS_ATTACH_ATTEMPT
//
INVALID_PROCESS_ATTACH_ATTEMPT = ULONG($00000005);
{$EXTERNALSYM INVALID_PROCESS_ATTACH_ATTEMPT}
//
// MessageId: INVALID_PROCESS_DETACH_ATTEMPT
//
// MessageText:
//
// INVALID_PROCESS_DETACH_ATTEMPT
//
INVALID_PROCESS_DETACH_ATTEMPT = ULONG($00000006);
{$EXTERNALSYM INVALID_PROCESS_DETACH_ATTEMPT}
//
// MessageId: INVALID_SOFTWARE_INTERRUPT
//
// MessageText:
//
// INVALID_SOFTWARE_INTERRUPT
//
INVALID_SOFTWARE_INTERRUPT = ULONG($00000007);
{$EXTERNALSYM INVALID_SOFTWARE_INTERRUPT}
//
// MessageId: IRQL_NOT_DISPATCH_LEVEL
//
// MessageText:
//
// IRQL_NOT_DISPATCH_LEVEL
//
IRQL_NOT_DISPATCH_LEVEL = ULONG($00000008);
{$EXTERNALSYM IRQL_NOT_DISPATCH_LEVEL}
//
// MessageId: IRQL_NOT_GREATER_OR_EQUAL
//
// MessageText:
//
// IRQL_NOT_GREATER_OR_EQUAL
//
IRQL_NOT_GREATER_OR_EQUAL = ULONG($00000009);
{$EXTERNALSYM IRQL_NOT_GREATER_OR_EQUAL}
//
// MessageId: IRQL_NOT_LESS_OR_EQUAL
//
// MessageText:
//
// IRQL_NOT_LESS_OR_EQUAL
//
IRQL_NOT_LESS_OR_EQUAL = ULONG($0000000A);
{$EXTERNALSYM IRQL_NOT_LESS_OR_EQUAL}
//
// MessageId: NO_EXCEPTION_HANDLING_SUPPORT
//
// MessageText:
//
// NO_EXCEPTION_HANDLING_SUPPORT
//
NO_EXCEPTION_HANDLING_SUPPORT = ULONG($0000000B);
{$EXTERNALSYM NO_EXCEPTION_HANDLING_SUPPORT}
//
// MessageId: MAXIMUM_WAIT_OBJECTS_EXCEEDED
//
// MessageText:
//
// MAXIMUM_WAIT_OBJECTS_EXCEEDED
//
MAXIMUM_WAIT_OBJECTS_EXCEEDED = ULONG($0000000C);
{$EXTERNALSYM MAXIMUM_WAIT_OBJECTS_EXCEEDED}
//
// MessageId: MUTEX_LEVEL_NUMBER_VIOLATION
//
// MessageText:
//
// MUTEX_LEVEL_NUMBER_VIOLATION
//
MUTEX_LEVEL_NUMBER_VIOLATION = ULONG($0000000D);
{$EXTERNALSYM MUTEX_LEVEL_NUMBER_VIOLATION}
//
// MessageId: NO_USER_MODE_CONTEXT
//
// MessageText:
//
// NO_USER_MODE_CONTEXT
//
NO_USER_MODE_CONTEXT = ULONG($0000000E);
{$EXTERNALSYM NO_USER_MODE_CONTEXT}
//
// MessageId: SPIN_LOCK_ALREADY_OWNED
//
// MessageText:
//
// SPIN_LOCK_ALREADY_OWNED
//
SPIN_LOCK_ALREADY_OWNED = ULONG($0000000F);
{$EXTERNALSYM SPIN_LOCK_ALREADY_OWNED}
//
// MessageId: SPIN_LOCK_NOT_OWNED
//
// MessageText:
//
// SPIN_LOCK_NOT_OWNED
//
SPIN_LOCK_NOT_OWNED = ULONG($00000010);
{$EXTERNALSYM SPIN_LOCK_NOT_OWNED}
//
// MessageId: THREAD_NOT_MUTEX_OWNER
//
// MessageText:
//
// THREAD_NOT_MUTEX_OWNER
//
THREAD_NOT_MUTEX_OWNER = ULONG($00000011);
{$EXTERNALSYM THREAD_NOT_MUTEX_OWNER}
//
// MessageId: TRAP_CAUSE_UNKNOWN
//
// MessageText:
//
// TRAP_CAUSE_UNKNOWN
//
TRAP_CAUSE_UNKNOWN = ULONG($00000012);
{$EXTERNALSYM TRAP_CAUSE_UNKNOWN}
//
// MessageId: EMPTY_THREAD_REAPER_LIST
//
// MessageText:
//
// EMPTY_THREAD_REAPER_LIST
//
EMPTY_THREAD_REAPER_LIST = ULONG($00000013);
{$EXTERNALSYM EMPTY_THREAD_REAPER_LIST}
//
// MessageId: CREATE_DELETE_LOCK_NOT_LOCKED
//
// MessageText:
//
// CREATE_DELETE_LOCK_NOT_LOCKED
//
CREATE_DELETE_LOCK_NOT_LOCKED = ULONG($00000014);
{$EXTERNALSYM CREATE_DELETE_LOCK_NOT_LOCKED}
//
// MessageId: LAST_CHANCE_CALLED_FROM_KMODE
//
// MessageText:
//
// LAST_CHANCE_CALLED_FROM_KMODE
//
LAST_CHANCE_CALLED_FROM_KMODE = ULONG($00000015);
{$EXTERNALSYM LAST_CHANCE_CALLED_FROM_KMODE}
//
// MessageId: CID_HANDLE_CREATION
//
// MessageText:
//
// CID_HANDLE_CREATION
//
CID_HANDLE_CREATION = ULONG($00000016);
{$EXTERNALSYM CID_HANDLE_CREATION}
//
// MessageId: CID_HANDLE_DELETION
//
// MessageText:
//
// CID_HANDLE_DELETION
//
CID_HANDLE_DELETION = ULONG($00000017);
{$EXTERNALSYM CID_HANDLE_DELETION}
//
// MessageId: REFERENCE_BY_POINTER
//
// MessageText:
//
// REFERENCE_BY_POINTER
//
REFERENCE_BY_POINTER = ULONG($00000018);
{$EXTERNALSYM REFERENCE_BY_POINTER}
//
// MessageId: BAD_POOL_HEADER
//
// MessageText:
//
// BAD_POOL_HEADER
//
BAD_POOL_HEADER = ULONG($00000019);
{$EXTERNALSYM BAD_POOL_HEADER}
//
// MessageId: MEMORY_MANAGEMENT
//
// MessageText:
//
// MEMORY_MANAGEMENT
//
MEMORY_MANAGEMENT = ULONG($0000001A);
{$EXTERNALSYM MEMORY_MANAGEMENT}
//
// MessageId: PFN_SHARE_COUNT
//
// MessageText:
//
// PFN_SHARE_COUNT
//
PFN_SHARE_COUNT = ULONG($0000001B);
{$EXTERNALSYM PFN_SHARE_COUNT}
//
// MessageId: PFN_REFERENCE_COUNT
//
// MessageText:
//
// PFN_REFERENCE_COUNT
//
PFN_REFERENCE_COUNT = ULONG($0000001C);
{$EXTERNALSYM PFN_REFERENCE_COUNT}
//
// MessageId: NO_SPIN_LOCK_AVAILABLE
//
// MessageText:
//
// NO_SPIN_LOCK_AVAILABLE
//
NO_SPIN_LOCK_AVAILABLE = ULONG($0000001D);
{$EXTERNALSYM NO_SPIN_LOCK_AVAILABLE}
//
// MessageId: KMODE_EXCEPTION_NOT_HANDLED
//
// MessageText:
//
// KMODE_EXCEPTION_NOT_HANDLED
//
KMODE_EXCEPTION_NOT_HANDLED = ULONG($0000001E);
{$EXTERNALSYM KMODE_EXCEPTION_NOT_HANDLED}
//
// MessageId: SHARED_RESOURCE_CONV_ERROR
//
// MessageText:
//
// SHARED_RESOURCE_CONV_ERROR
//
SHARED_RESOURCE_CONV_ERROR = ULONG($0000001F);
{$EXTERNALSYM SHARED_RESOURCE_CONV_ERROR}
//
// MessageId: KERNEL_APC_PENDING_DURING_EXIT
//
// MessageText:
//
// KERNEL_APC_PENDING_DURING_EXIT
//
KERNEL_APC_PENDING_DURING_EXIT = ULONG($00000020);
{$EXTERNALSYM KERNEL_APC_PENDING_DURING_EXIT}
//
// MessageId: QUOTA_UNDERFLOW
//
// MessageText:
//
// QUOTA_UNDERFLOW
//
QUOTA_UNDERFLOW = ULONG($00000021);
{$EXTERNALSYM QUOTA_UNDERFLOW}
//
// MessageId: FILE_SYSTEM
//
// MessageText:
//
// FILE_SYSTEM
//
FILE_SYSTEM = ULONG($00000022);
{$EXTERNALSYM FILE_SYSTEM}
//
// MessageId: FAT_FILE_SYSTEM
//
// MessageText:
//
// FAT_FILE_SYSTEM
//
FAT_FILE_SYSTEM = ULONG($00000023);
{$EXTERNALSYM FAT_FILE_SYSTEM}
//
// MessageId: NTFS_FILE_SYSTEM
//
// MessageText:
//
// NTFS_FILE_SYSTEM
//
NTFS_FILE_SYSTEM = ULONG($00000024);
{$EXTERNALSYM NTFS_FILE_SYSTEM}
//
// MessageId: NPFS_FILE_SYSTEM
//
// MessageText:
//
// NPFS_FILE_SYSTEM
//
NPFS_FILE_SYSTEM = ULONG($00000025);
{$EXTERNALSYM NPFS_FILE_SYSTEM}
//
// MessageId: CDFS_FILE_SYSTEM
//
// MessageText:
//
// CDFS_FILE_SYSTEM
//
CDFS_FILE_SYSTEM = ULONG($00000026);
{$EXTERNALSYM CDFS_FILE_SYSTEM}
//
// MessageId: RDR_FILE_SYSTEM
//
// MessageText:
//
// RDR_FILE_SYSTEM
//
RDR_FILE_SYSTEM = ULONG($00000027);
{$EXTERNALSYM RDR_FILE_SYSTEM}
//
// MessageId: CORRUPT_ACCESS_TOKEN
//
// MessageText:
//
// CORRUPT_ACCESS_TOKEN
//
CORRUPT_ACCESS_TOKEN = ULONG($00000028);
{$EXTERNALSYM CORRUPT_ACCESS_TOKEN}
//
// MessageId: SECURITY_SYSTEM
//
// MessageText:
//
// SECURITY_SYSTEM
//
SECURITY_SYSTEM = ULONG($00000029);
{$EXTERNALSYM SECURITY_SYSTEM}
//
// MessageId: INCONSISTENT_IRP
//
// MessageText:
//
// INCONSISTENT_IRP
//
INCONSISTENT_IRP = ULONG($0000002A);
{$EXTERNALSYM INCONSISTENT_IRP}
//
// MessageId: PANIC_STACK_SWITCH
//
// MessageText:
//
// PANIC_STACK_SWITCH
//
PANIC_STACK_SWITCH = ULONG($0000002B);
{$EXTERNALSYM PANIC_STACK_SWITCH}
//
// MessageId: PORT_DRIVER_INTERNAL
//
// MessageText:
//
// PORT_DRIVER_INTERNAL
//
PORT_DRIVER_INTERNAL = ULONG($0000002C);
{$EXTERNALSYM PORT_DRIVER_INTERNAL}
//
// MessageId: SCSI_DISK_DRIVER_INTERNAL
//
// MessageText:
//
// SCSI_DISK_DRIVER_INTERNAL
//
SCSI_DISK_DRIVER_INTERNAL = ULONG($0000002D);
{$EXTERNALSYM SCSI_DISK_DRIVER_INTERNAL}
//
// MessageId: DATA_BUS_ERROR
//
// MessageText:
//
// DATA_BUS_ERROR
//
DATA_BUS_ERROR = ULONG($0000002E);
{$EXTERNALSYM DATA_BUS_ERROR}
//
// MessageId: INSTRUCTION_BUS_ERROR
//
// MessageText:
//
// INSTRUCTION_BUS_ERROR
//
INSTRUCTION_BUS_ERROR = ULONG($0000002F);
{$EXTERNALSYM INSTRUCTION_BUS_ERROR}
//
// MessageId: SET_OF_INVALID_CONTEXT
//
// MessageText:
//
// SET_OF_INVALID_CONTEXT
//
SET_OF_INVALID_CONTEXT = ULONG($00000030);
{$EXTERNALSYM SET_OF_INVALID_CONTEXT}
//
// MessageId: PHASE0_INITIALIZATION_FAILED
//
// MessageText:
//
// PHASE0_INITIALIZATION_FAILED
//
PHASE0_INITIALIZATION_FAILED = ULONG($00000031);
{$EXTERNALSYM PHASE0_INITIALIZATION_FAILED}
//
// MessageId: PHASE1_INITIALIZATION_FAILED
//
// MessageText:
//
// PHASE1_INITIALIZATION_FAILED
//
PHASE1_INITIALIZATION_FAILED = ULONG($00000032);
{$EXTERNALSYM PHASE1_INITIALIZATION_FAILED}
//
// MessageId: UNEXPECTED_INITIALIZATION_CALL
//
// MessageText:
//
// UNEXPECTED_INITIALIZATION_CALL
//
UNEXPECTED_INITIALIZATION_CALL = ULONG($00000033);
{$EXTERNALSYM UNEXPECTED_INITIALIZATION_CALL}
//
// MessageId: CACHE_MANAGER
//
// MessageText:
//
// CACHE_MANAGER
//
CACHE_MANAGER = ULONG($00000034);
{$EXTERNALSYM CACHE_MANAGER}
//
// MessageId: NO_MORE_IRP_STACK_LOCATIONS
//
// MessageText:
//
// NO_MORE_IRP_STACK_LOCATIONS
//
NO_MORE_IRP_STACK_LOCATIONS = ULONG($00000035);
{$EXTERNALSYM NO_MORE_IRP_STACK_LOCATIONS}
//
// MessageId: DEVICE_REFERENCE_COUNT_NOT_ZERO
//
// MessageText:
//
// DEVICE_REFERENCE_COUNT_NOT_ZERO
//
DEVICE_REFERENCE_COUNT_NOT_ZERO = ULONG($00000036);
{$EXTERNALSYM DEVICE_REFERENCE_COUNT_NOT_ZERO}
//
// MessageId: FLOPPY_INTERNAL_ERROR
//
// MessageText:
//
// FLOPPY_INTERNAL_ERROR
//
FLOPPY_INTERNAL_ERROR = ULONG($00000037);
{$EXTERNALSYM FLOPPY_INTERNAL_ERROR}
//
// MessageId: SERIAL_DRIVER_INTERNAL
//
// MessageText:
//
// SERIAL_DRIVER_INTERNAL
//
SERIAL_DRIVER_INTERNAL = ULONG($00000038);
{$EXTERNALSYM SERIAL_DRIVER_INTERNAL}
//
// MessageId: SYSTEM_EXIT_OWNED_MUTEX
//
// MessageText:
//
// SYSTEM_EXIT_OWNED_MUTEX
//
SYSTEM_EXIT_OWNED_MUTEX = ULONG($00000039);
{$EXTERNALSYM SYSTEM_EXIT_OWNED_MUTEX}
//
// MessageId: SYSTEM_UNWIND_PREVIOUS_USER
//
// MessageText:
//
// SYSTEM_UNWIND_PREVIOUS_USER
//
SYSTEM_UNWIND_PREVIOUS_USER = ULONG($0000003A);
{$EXTERNALSYM SYSTEM_UNWIND_PREVIOUS_USER}
//
// MessageId: SYSTEM_SERVICE_EXCEPTION
//
// MessageText:
//
// SYSTEM_SERVICE_EXCEPTION
//
SYSTEM_SERVICE_EXCEPTION = ULONG($0000003B);
{$EXTERNALSYM SYSTEM_SERVICE_EXCEPTION}
//
// MessageId: INTERRUPT_UNWIND_ATTEMPTED
//
// MessageText:
//
// INTERRUPT_UNWIND_ATTEMPTED
//
INTERRUPT_UNWIND_ATTEMPTED = ULONG($0000003C);
{$EXTERNALSYM INTERRUPT_UNWIND_ATTEMPTED}
//
// MessageId: INTERRUPT_EXCEPTION_NOT_HANDLED
//
// MessageText:
//
// INTERRUPT_EXCEPTION_NOT_HANDLED
//
INTERRUPT_EXCEPTION_NOT_HANDLED = ULONG($0000003D);
{$EXTERNALSYM INTERRUPT_EXCEPTION_NOT_HANDLED}
//
// MessageId: MULTIPROCESSOR_CONFIGURATION_NOT_SUPPORTED
//
// MessageText:
//
// MULTIPROCESSOR_CONFIGURATION_NOT_SUPPORTED
//
MULTIPROCESSOR_CONFIGURATION_NOT_SUPPORTED = ULONG($0000003E);
{$EXTERNALSYM MULTIPROCESSOR_CONFIGURATION_NOT_SUPPORTED}
//
// MessageId: NO_MORE_SYSTEM_PTES
//
// MessageText:
//
// NO_MORE_SYSTEM_PTES
//
NO_MORE_SYSTEM_PTES = ULONG($0000003F);
{$EXTERNALSYM NO_MORE_SYSTEM_PTES}
//
// MessageId: TARGET_MDL_TOO_SMALL
//
// MessageText:
//
// TARGET_MDL_TOO_SMALL
//
TARGET_MDL_TOO_SMALL = ULONG($00000040);
{$EXTERNALSYM TARGET_MDL_TOO_SMALL}
//
// MessageId: MUST_SUCCEED_POOL_EMPTY
//
// MessageText:
//
// MUST_SUCCEED_POOL_EMPTY
//
MUST_SUCCEED_POOL_EMPTY = ULONG($00000041);
{$EXTERNALSYM MUST_SUCCEED_POOL_EMPTY}
//
// MessageId: ATDISK_DRIVER_INTERNAL
//
// MessageText:
//
// ATDISK_DRIVER_INTERNAL
//
ATDISK_DRIVER_INTERNAL = ULONG($00000042);
{$EXTERNALSYM ATDISK_DRIVER_INTERNAL}
//
// MessageId: NO_SUCH_PARTITION
//
// MessageText:
//
// NO_SUCH_PARTITION
//
NO_SUCH_PARTITION = ULONG($00000043);
{$EXTERNALSYM NO_SUCH_PARTITION}
//
// MessageId: MULTIPLE_IRP_COMPLETE_REQUESTS
//
// MessageText:
//
// MULTIPLE_IRP_COMPLETE_REQUESTS
//
MULTIPLE_IRP_COMPLETE_REQUESTS = ULONG($00000044);
{$EXTERNALSYM MULTIPLE_IRP_COMPLETE_REQUESTS}
//
// MessageId: INSUFFICIENT_SYSTEM_MAP_REGS
//
// MessageText:
//
// INSUFFICIENT_SYSTEM_MAP_REGS
//
INSUFFICIENT_SYSTEM_MAP_REGS = ULONG($00000045);
{$EXTERNALSYM INSUFFICIENT_SYSTEM_MAP_REGS}
//
// MessageId: DEREF_UNKNOWN_LOGON_SESSION
//
// MessageText:
//
// DEREF_UNKNOWN_LOGON_SESSION
//
DEREF_UNKNOWN_LOGON_SESSION = ULONG($00000046);
{$EXTERNALSYM DEREF_UNKNOWN_LOGON_SESSION}
//
// MessageId: REF_UNKNOWN_LOGON_SESSION
//
// MessageText:
//
// REF_UNKNOWN_LOGON_SESSION
//
REF_UNKNOWN_LOGON_SESSION = ULONG($00000047);
{$EXTERNALSYM REF_UNKNOWN_LOGON_SESSION}
//
// MessageId: CANCEL_STATE_IN_COMPLETED_IRP
//
// MessageText:
//
// CANCEL_STATE_IN_COMPLETED_IRP
//
CANCEL_STATE_IN_COMPLETED_IRP = ULONG($00000048);
{$EXTERNALSYM CANCEL_STATE_IN_COMPLETED_IRP}
//
// MessageId: PAGE_FAULT_WITH_INTERRUPTS_OFF
//
// MessageText:
//
// PAGE_FAULT_WITH_INTERRUPTS_OFF
//
PAGE_FAULT_WITH_INTERRUPTS_OFF = ULONG($00000049);
{$EXTERNALSYM PAGE_FAULT_WITH_INTERRUPTS_OFF}
//
// MessageId: IRQL_GT_ZERO_AT_SYSTEM_SERVICE
//
// MessageText:
//
// IRQL_GT_ZERO_AT_SYSTEM_SERVICE
//
IRQL_GT_ZERO_AT_SYSTEM_SERVICE = ULONG($0000004A);
{$EXTERNALSYM IRQL_GT_ZERO_AT_SYSTEM_SERVICE}
//
// MessageId: STREAMS_INTERNAL_ERROR
//
// MessageText:
//
// STREAMS_INTERNAL_ERROR
//
STREAMS_INTERNAL_ERROR = ULONG($0000004B);
{$EXTERNALSYM STREAMS_INTERNAL_ERROR}
//
// MessageId: FATAL_UNHANDLED_HARD_ERROR
//
// MessageText:
//
// FATAL_UNHANDLED_HARD_ERROR
//
FATAL_UNHANDLED_HARD_ERROR = ULONG($0000004C);
{$EXTERNALSYM FATAL_UNHANDLED_HARD_ERROR}
//
// MessageId: NO_PAGES_AVAILABLE
//
// MessageText:
//
// NO_PAGES_AVAILABLE
//
NO_PAGES_AVAILABLE = ULONG($0000004D);
{$EXTERNALSYM NO_PAGES_AVAILABLE}
//
// MessageId: PFN_LIST_CORRUPT
//
// MessageText:
//
// PFN_LIST_CORRUPT
//
PFN_LIST_CORRUPT = ULONG($0000004E);
{$EXTERNALSYM PFN_LIST_CORRUPT}
//
// MessageId: NDIS_INTERNAL_ERROR
//
// MessageText:
//
// NDIS_INTERNAL_ERROR
//
NDIS_INTERNAL_ERROR = ULONG($0000004F);
{$EXTERNALSYM NDIS_INTERNAL_ERROR}
//
// MessageId: PAGE_FAULT_IN_NONPAGED_AREA
//
// MessageText:
//
// PAGE_FAULT_IN_NONPAGED_AREA
//
PAGE_FAULT_IN_NONPAGED_AREA = ULONG($00000050);
{$EXTERNALSYM PAGE_FAULT_IN_NONPAGED_AREA}
//
// MessageId: REGISTRY_ERROR
//
// MessageText:
//
// REGISTRY_ERROR
//
REGISTRY_ERROR = ULONG($00000051);
{$EXTERNALSYM REGISTRY_ERROR}
//
// MessageId: MAILSLOT_FILE_SYSTEM
//
// MessageText:
//
// MAILSLOT_FILE_SYSTEM
//
MAILSLOT_FILE_SYSTEM = ULONG($00000052);
{$EXTERNALSYM MAILSLOT_FILE_SYSTEM}
//
// MessageId: NO_BOOT_DEVICE
//
// MessageText:
//
// NO_BOOT_DEVICE
//
NO_BOOT_DEVICE = ULONG($00000053);
{$EXTERNALSYM NO_BOOT_DEVICE}
//
// MessageId: LM_SERVER_INTERNAL_ERROR
//
// MessageText:
//
// LM_SERVER_INTERNAL_ERROR
//
LM_SERVER_INTERNAL_ERROR = ULONG($00000054);
{$EXTERNALSYM LM_SERVER_INTERNAL_ERROR}
//
// MessageId: DATA_COHERENCY_EXCEPTION
//
// MessageText:
//
// DATA_COHERENCY_EXCEPTION
//
DATA_COHERENCY_EXCEPTION = ULONG($00000055);
{$EXTERNALSYM DATA_COHERENCY_EXCEPTION}
//
// MessageId: INSTRUCTION_COHERENCY_EXCEPTION
//
// MessageText:
//
// INSTRUCTION_COHERENCY_EXCEPTION
//
INSTRUCTION_COHERENCY_EXCEPTION = ULONG($00000056);
{$EXTERNALSYM INSTRUCTION_COHERENCY_EXCEPTION}
//
// MessageId: XNS_INTERNAL_ERROR
//
// MessageText:
//
// XNS_INTERNAL_ERROR
//
XNS_INTERNAL_ERROR = ULONG($00000057);
{$EXTERNALSYM XNS_INTERNAL_ERROR}
//
// MessageId: FTDISK_INTERNAL_ERROR
//
// MessageText:
//
// FTDISK_INTERNAL_ERROR
//
FTDISK_INTERNAL_ERROR = ULONG($00000058);
{$EXTERNALSYM FTDISK_INTERNAL_ERROR}
//
// MessageId: PINBALL_FILE_SYSTEM
//
// MessageText:
//
// PINBALL_FILE_SYSTEM
//
PINBALL_FILE_SYSTEM = ULONG($00000059);
{$EXTERNALSYM PINBALL_FILE_SYSTEM}
//
// MessageId: CRITICAL_SERVICE_FAILED
//
// MessageText:
//
// CRITICAL_SERVICE_FAILED
//
CRITICAL_SERVICE_FAILED = ULONG($0000005A);
{$EXTERNALSYM CRITICAL_SERVICE_FAILED}
//
// MessageId: SET_ENV_VAR_FAILED
//
// MessageText:
//
// SET_ENV_VAR_FAILED
//
SET_ENV_VAR_FAILED = ULONG($0000005B);
{$EXTERNALSYM SET_ENV_VAR_FAILED}
//
// MessageId: HAL_INITIALIZATION_FAILED
//
// MessageText:
//
// HAL_INITIALIZATION_FAILED
//
HAL_INITIALIZATION_FAILED = ULONG($0000005C);
{$EXTERNALSYM HAL_INITIALIZATION_FAILED}
//
// MessageId: UNSUPPORTED_PROCESSOR
//
// MessageText:
//
// UNSUPPORTED_PROCESSOR
//
UNSUPPORTED_PROCESSOR = ULONG($0000005D);
{$EXTERNALSYM UNSUPPORTED_PROCESSOR}
//
// MessageId: OBJECT_INITIALIZATION_FAILED
//
// MessageText:
//
// OBJECT_INITIALIZATION_FAILED
//
OBJECT_INITIALIZATION_FAILED = ULONG($0000005E);
{$EXTERNALSYM OBJECT_INITIALIZATION_FAILED}
//
// MessageId: SECURITY_INITIALIZATION_FAILED
//
// MessageText:
//
// SECURITY_INITIALIZATION_FAILED
//
SECURITY_INITIALIZATION_FAILED = ULONG($0000005F);
{$EXTERNALSYM SECURITY_INITIALIZATION_FAILED}
//
// MessageId: PROCESS_INITIALIZATION_FAILED
//
// MessageText:
//
// PROCESS_INITIALIZATION_FAILED
//
PROCESS_INITIALIZATION_FAILED = ULONG($00000060);
{$EXTERNALSYM PROCESS_INITIALIZATION_FAILED}
//
// MessageId: HAL1_INITIALIZATION_FAILED
//
// MessageText:
//
// HAL1_INITIALIZATION_FAILED
//
HAL1_INITIALIZATION_FAILED = ULONG($00000061);
{$EXTERNALSYM HAL1_INITIALIZATION_FAILED}
//
// MessageId: OBJECT1_INITIALIZATION_FAILED
//
// MessageText:
//
// OBJECT1_INITIALIZATION_FAILED
//
OBJECT1_INITIALIZATION_FAILED = ULONG($00000062);
{$EXTERNALSYM OBJECT1_INITIALIZATION_FAILED}
//
// MessageId: SECURITY1_INITIALIZATION_FAILED
//
// MessageText:
//
// SECURITY1_INITIALIZATION_FAILED
//
SECURITY1_INITIALIZATION_FAILED = ULONG($00000063);
{$EXTERNALSYM SECURITY1_INITIALIZATION_FAILED}
//
// MessageId: SYMBOLIC_INITIALIZATION_FAILED
//
// MessageText:
//
// SYMBOLIC_INITIALIZATION_FAILED
//
SYMBOLIC_INITIALIZATION_FAILED = ULONG($00000064);
{$EXTERNALSYM SYMBOLIC_INITIALIZATION_FAILED}
//
// MessageId: MEMORY1_INITIALIZATION_FAILED
//
// MessageText:
//
// MEMORY1_INITIALIZATION_FAILED
//
MEMORY1_INITIALIZATION_FAILED = ULONG($00000065);
{$EXTERNALSYM MEMORY1_INITIALIZATION_FAILED}
//
// MessageId: CACHE_INITIALIZATION_FAILED
//
// MessageText:
//
// CACHE_INITIALIZATION_FAILED
//
CACHE_INITIALIZATION_FAILED = ULONG($00000066);
{$EXTERNALSYM CACHE_INITIALIZATION_FAILED}
//
// MessageId: CONFIG_INITIALIZATION_FAILED
//
// MessageText:
//
// CONFIG_INITIALIZATION_FAILED
//
CONFIG_INITIALIZATION_FAILED = ULONG($00000067);
{$EXTERNALSYM CONFIG_INITIALIZATION_FAILED}
//
// MessageId: FILE_INITIALIZATION_FAILED
//
// MessageText:
//
// FILE_INITIALIZATION_FAILED
//
FILE_INITIALIZATION_FAILED = ULONG($00000068);
{$EXTERNALSYM FILE_INITIALIZATION_FAILED}
//
// MessageId: IO1_INITIALIZATION_FAILED
//
// MessageText:
//
// IO1_INITIALIZATION_FAILED
//
IO1_INITIALIZATION_FAILED = ULONG($00000069);
{$EXTERNALSYM IO1_INITIALIZATION_FAILED}
//
// MessageId: LPC_INITIALIZATION_FAILED
//
// MessageText:
//
// LPC_INITIALIZATION_FAILED
//
LPC_INITIALIZATION_FAILED = ULONG($0000006A);
{$EXTERNALSYM LPC_INITIALIZATION_FAILED}
//
// MessageId: PROCESS1_INITIALIZATION_FAILED
//
// MessageText:
//
// PROCESS1_INITIALIZATION_FAILED
//
PROCESS1_INITIALIZATION_FAILED = ULONG($0000006B);
{$EXTERNALSYM PROCESS1_INITIALIZATION_FAILED}
//
// MessageId: REFMON_INITIALIZATION_FAILED
//
// MessageText:
//
// REFMON_INITIALIZATION_FAILED
//
REFMON_INITIALIZATION_FAILED = ULONG($0000006C);
{$EXTERNALSYM REFMON_INITIALIZATION_FAILED}
//
// MessageId: SESSION1_INITIALIZATION_FAILED
//
// MessageText:
//
// SESSION1_INITIALIZATION_FAILED
//
SESSION1_INITIALIZATION_FAILED = ULONG($0000006D);
{$EXTERNALSYM SESSION1_INITIALIZATION_FAILED}
//
// MessageId: SESSION2_INITIALIZATION_FAILED
//
// MessageText:
//
// SESSION2_INITIALIZATION_FAILED
//
SESSION2_INITIALIZATION_FAILED = ULONG($0000006E);
{$EXTERNALSYM SESSION2_INITIALIZATION_FAILED}
//
// MessageId: SESSION3_INITIALIZATION_FAILED
//
// MessageText:
//
// SESSION3_INITIALIZATION_FAILED
//
SESSION3_INITIALIZATION_FAILED = ULONG($0000006F);
{$EXTERNALSYM SESSION3_INITIALIZATION_FAILED}
//
// MessageId: SESSION4_INITIALIZATION_FAILED
//
// MessageText:
//
// SESSION4_INITIALIZATION_FAILED
//
SESSION4_INITIALIZATION_FAILED = ULONG($00000070);
{$EXTERNALSYM SESSION4_INITIALIZATION_FAILED}
//
// MessageId: SESSION5_INITIALIZATION_FAILED
//
// MessageText:
//
// SESSION5_INITIALIZATION_FAILED
//
SESSION5_INITIALIZATION_FAILED = ULONG($00000071);
{$EXTERNALSYM SESSION5_INITIALIZATION_FAILED}
//
// MessageId: ASSIGN_DRIVE_LETTERS_FAILED
//
// MessageText:
//
// ASSIGN_DRIVE_LETTERS_FAILED
//
ASSIGN_DRIVE_LETTERS_FAILED = ULONG($00000072);
{$EXTERNALSYM ASSIGN_DRIVE_LETTERS_FAILED}
//
// MessageId: CONFIG_LIST_FAILED
//
// MessageText:
//
// CONFIG_LIST_FAILED
//
CONFIG_LIST_FAILED = ULONG($00000073);
{$EXTERNALSYM CONFIG_LIST_FAILED}
//
// MessageId: BAD_SYSTEM_CONFIG_INFO
//
// MessageText:
//
// BAD_SYSTEM_CONFIG_INFO
//
BAD_SYSTEM_CONFIG_INFO = ULONG($00000074);
{$EXTERNALSYM BAD_SYSTEM_CONFIG_INFO}
//
// MessageId: CANNOT_WRITE_CONFIGURATION
//
// MessageText:
//
// CANNOT_WRITE_CONFIGURATION
//
CANNOT_WRITE_CONFIGURATION = ULONG($00000075);
{$EXTERNALSYM CANNOT_WRITE_CONFIGURATION}
//
// MessageId: PROCESS_HAS_LOCKED_PAGES
//
// MessageText:
//
// PROCESS_HAS_LOCKED_PAGES
//
PROCESS_HAS_LOCKED_PAGES = ULONG($00000076);
{$EXTERNALSYM PROCESS_HAS_LOCKED_PAGES}
//
// MessageId: KERNEL_STACK_INPAGE_ERROR
//
// MessageText:
//
// KERNEL_STACK_INPAGE_ERROR
//
KERNEL_STACK_INPAGE_ERROR = ULONG($00000077);
{$EXTERNALSYM KERNEL_STACK_INPAGE_ERROR}
//
// MessageId: PHASE0_EXCEPTION
//
// MessageText:
//
// PHASE0_EXCEPTION
//
PHASE0_EXCEPTION = ULONG($00000078);
{$EXTERNALSYM PHASE0_EXCEPTION}
//
// MessageId: MISMATCHED_HAL
//
// MessageText:
//
// Mismatched kernel and hal image.
//
MISMATCHED_HAL = ULONG($00000079);
{$EXTERNALSYM MISMATCHED_HAL}
//
// MessageId: KERNEL_DATA_INPAGE_ERROR
//
// MessageText:
//
// KERNEL_DATA_INPAGE_ERROR
//
KERNEL_DATA_INPAGE_ERROR = ULONG($0000007A);
{$EXTERNALSYM KERNEL_DATA_INPAGE_ERROR}
//
// MessageId: INACCESSIBLE_BOOT_DEVICE
//
// MessageText:
//
// INACCESSIBLE_BOOT_DEVICE
//
INACCESSIBLE_BOOT_DEVICE = ULONG($0000007B);
{$EXTERNALSYM INACCESSIBLE_BOOT_DEVICE}
//
// MessageId: BUGCODE_PSS_MESSAGE
//
// MessageText:
//
// If this is the first time you've seen this Stop error screen,
// restart your computer. If this screen appears again, follow
// these steps:
//
// Check to make sure any new hardware or software is properly installed.
// If this is a new installation, ask your hardware or software manufacturer
// for any Windows 2000 updates you might need.
//
// If problems continue, disable or remove any newly installed hardware
// or software. Disable BIOS memory options such as caching or shadowing.
// If you need to use Safe Mode to remove or disable components, restart
// your computer, press F8 to select Advanced Startup Options, and then
// select Safe Mode.
//
// Refer to your Getting Started manual for more information on
// troubleshooting Stop errors.
//
BUGCODE_PSS_MESSAGE = ULONG($0000007C);
{$EXTERNALSYM BUGCODE_PSS_MESSAGE}
//
// MessageId: INSTALL_MORE_MEMORY
//
// MessageText:
//
// INSTALL_MORE_MEMORY
//
INSTALL_MORE_MEMORY = ULONG($0000007D);
{$EXTERNALSYM INSTALL_MORE_MEMORY}
//
// MessageId: WINDOWS_NT_BANNER
//
// MessageText:
//
// Microsoft (R) Windows 2000 (R) Version %hs (Build %u%hs)
//
WINDOWS_NT_BANNER = ULONG($4000007E);
{$EXTERNALSYM WINDOWS_NT_BANNER}
//
// MessageId: UNEXPECTED_KERNEL_MODE_TRAP
//
// MessageText:
//
// UNEXPECTED_KERNEL_MODE_TRAP
//
UNEXPECTED_KERNEL_MODE_TRAP = ULONG($0000007F);
{$EXTERNALSYM UNEXPECTED_KERNEL_MODE_TRAP}
//
// MessageId: NMI_HARDWARE_FAILURE
//
// MessageText:
//
// Hardware malfunction.
//
NMI_HARDWARE_FAILURE = ULONG($00000080);
{$EXTERNALSYM NMI_HARDWARE_FAILURE}
//
// MessageId: SPIN_LOCK_INIT_FAILURE
//
// MessageText:
//
// SPIN_LOCK_INIT_FAILURE
//
SPIN_LOCK_INIT_FAILURE = ULONG($00000081);
{$EXTERNALSYM SPIN_LOCK_INIT_FAILURE}
//
// MessageId: DFS_FILE_SYSTEM
//
// MessageText:
//
// DFS_FILE_SYSTEM
//
DFS_FILE_SYSTEM = ULONG($00000082);
{$EXTERNALSYM DFS_FILE_SYSTEM}
//
// MessageId: OFS_FILE_SYSTEM
//
// MessageText:
//
// OFS_FILE_SYSTEM
//
OFS_FILE_SYSTEM = ULONG($00000083);
{$EXTERNALSYM OFS_FILE_SYSTEM}
//
// MessageId: RECOM_DRIVER
//
// MessageText:
//
// RECOM_DRIVER
//
RECOM_DRIVER = ULONG($00000084);
{$EXTERNALSYM RECOM_DRIVER}
//
// MessageId: SETUP_FAILURE
//
// MessageText:
//
// SETUP_FAILURE
//
SETUP_FAILURE = ULONG($00000085);
{$EXTERNALSYM SETUP_FAILURE}
//
// MessageId: AUDIT_FAILURE
//
// MessageText:
//
// Audit attempt has failed.
//
AUDIT_FAILURE = ULONG($00000086);
{$EXTERNALSYM AUDIT_FAILURE}
//
// MessageId: WINDOWS_NT_CSD_STRING
//
// MessageText:
//
// Service Pack
//
WINDOWS_NT_CSD_STRING = ULONG($40000087);
{$EXTERNALSYM WINDOWS_NT_CSD_STRING}
//
// MessageId: WINDOWS_NT_INFO_STRING
//
// MessageText:
//
// %u System Processor [%u MB Memory] %Z
//
WINDOWS_NT_INFO_STRING = ULONG($40000088);
{$EXTERNALSYM WINDOWS_NT_INFO_STRING}
//
// MessageId: WINDOWS_NT_MP_STRING
//
// MessageText:
//
// MultiProcessor Kernel
//
WINDOWS_NT_MP_STRING = ULONG($40000089);
{$EXTERNALSYM WINDOWS_NT_MP_STRING}
//
// MessageId: THREAD_TERMINATE_HELD_MUTEX
//
// MessageText:
//
// A kernel thread terminated while holding a mutex
//
THREAD_TERMINATE_HELD_MUTEX = ULONG($4000008A);
{$EXTERNALSYM THREAD_TERMINATE_HELD_MUTEX}
//
// MessageId: MBR_CHECKSUM_MISMATCH
//
// MessageText:
//
// This system may be infected with a virus.
//
MBR_CHECKSUM_MISMATCH = ULONG($0000008B);
{$EXTERNALSYM MBR_CHECKSUM_MISMATCH}
//
// MessageId: BUGCODE_PSS_CRASH_INIT
//
// MessageText:
//
// Beginning dump of physical memory
//
BUGCODE_PSS_CRASH_INIT = ULONG($0000008C);
{$EXTERNALSYM BUGCODE_PSS_CRASH_INIT}
//
// MessageId: BUGCODE_PSS_CRASH_PROGRESS
//
// MessageText:
//
// Dumping physical memory to disk
//
BUGCODE_PSS_CRASH_PROGRESS = ULONG($0000008D);
{$EXTERNALSYM BUGCODE_PSS_CRASH_PROGRESS}
//
// MessageId: BUGCODE_PSS_CRASH_DONE
//
// MessageText:
//
// Physical memory dump complete. Contact your system administrator or
// technical support group.
//
BUGCODE_PSS_CRASH_DONE = ULONG($0000008E);
{$EXTERNALSYM BUGCODE_PSS_CRASH_DONE}
//
// MessageId: PP0_INITIALIZATION_FAILED
//
// MessageText:
//
// PP0_INITIALIZATION_FAILED
//
PP0_INITIALIZATION_FAILED = ULONG($0000008F);
{$EXTERNALSYM PP0_INITIALIZATION_FAILED}
//
// MessageId: PP1_INITIALIZATION_FAILED
//
// MessageText:
//
// PP1_INITIALIZATION_FAILED
//
PP1_INITIALIZATION_FAILED = ULONG($00000090);
{$EXTERNALSYM PP1_INITIALIZATION_FAILED}
//
// MessageId: WIN32K_INIT_OR_RIT_FAILURE
//
// MessageText:
//
// WIN32K_INIT_OR_RIT_FAILURE
//
WIN32K_INIT_OR_RIT_FAILURE = ULONG($00000091);
{$EXTERNALSYM WIN32K_INIT_OR_RIT_FAILURE}
//
// MessageId: UP_DRIVER_ON_MP_SYSTEM
//
// MessageText:
//
// UP_DRIVER_ON_MP_SYSTEM
//
UP_DRIVER_ON_MP_SYSTEM = ULONG($00000092);
{$EXTERNALSYM UP_DRIVER_ON_MP_SYSTEM}
//
// MessageId: INVALID_KERNEL_HANDLE
//
// MessageText:
//
// INVALID_KERNEL_HANDLE
//
INVALID_KERNEL_HANDLE = ULONG($00000093);
{$EXTERNALSYM INVALID_KERNEL_HANDLE}
//
// MessageId: KERNEL_STACK_LOCKED_AT_EXIT
//
// MessageText:
//
// KERNEL_STACK_LOCKED_AT_EXIT
//
KERNEL_STACK_LOCKED_AT_EXIT = ULONG($00000094);
{$EXTERNALSYM KERNEL_STACK_LOCKED_AT_EXIT}
//
// MessageId: PNP_INTERNAL_ERROR
//
// MessageText:
//
// PNP_INTERNAL_ERROR
//
PNP_INTERNAL_ERROR = ULONG($00000095);
{$EXTERNALSYM PNP_INTERNAL_ERROR}
//
// MessageId: INVALID_WORK_QUEUE_ITEM
//
// MessageText:
//
// INVALID_WORK_QUEUE_ITEM
//
INVALID_WORK_QUEUE_ITEM = ULONG($00000096);
{$EXTERNALSYM INVALID_WORK_QUEUE_ITEM}
//
// MessageId: BOUND_IMAGE_UNSUPPORTED
//
// MessageText:
//
// BOUND_IMAGE_UNSUPPORTED
//
BOUND_IMAGE_UNSUPPORTED = ULONG($00000097);
{$EXTERNALSYM BOUND_IMAGE_UNSUPPORTED}
//
// MessageId: END_OF_NT_EVALUATION_PERIOD
//
// MessageText:
//
// END_OF_NT_EVALUATION_PERIOD
//
END_OF_NT_EVALUATION_PERIOD = ULONG($00000098);
{$EXTERNALSYM END_OF_NT_EVALUATION_PERIOD}
//
// MessageId: INVALID_REGION_OR_SEGMENT
//
// MessageText:
//
// INVALID_REGION_OR_SEGMENT
//
INVALID_REGION_OR_SEGMENT = ULONG($00000099);
{$EXTERNALSYM INVALID_REGION_OR_SEGMENT}
//
// MessageId: SYSTEM_LICENSE_VIOLATION
//
// MessageText:
//
// SYSTEM_LICENSE_VIOLATION
//
SYSTEM_LICENSE_VIOLATION = ULONG($0000009A);
{$EXTERNALSYM SYSTEM_LICENSE_VIOLATION}
//
// MessageId: UDFS_FILE_SYSTEM
//
// MessageText:
//
// UDFS_FILE_SYSTEM
//
UDFS_FILE_SYSTEM = ULONG($0000009B);
{$EXTERNALSYM UDFS_FILE_SYSTEM}
//
// MessageId: MACHINE_CHECK_EXCEPTION
//
// MessageText:
//
// MACHINE_CHECK_EXCEPTION
//
MACHINE_CHECK_EXCEPTION = ULONG($0000009C);
{$EXTERNALSYM MACHINE_CHECK_EXCEPTION}
//
// MessageId: WINDOWS_NT_INFO_STRING_PLURAL
//
// MessageText:
//
// %u System Processors [%u MB Memory] %Z
//
WINDOWS_NT_INFO_STRING_PLURAL = ULONG($4000009D);
{$EXTERNALSYM WINDOWS_NT_INFO_STRING_PLURAL}
//
// MessageId: WINDOWS_NT_RC_STRING
//
// MessageText:
//
// RC
//
WINDOWS_NT_RC_STRING = ULONG($4000009E);
{$EXTERNALSYM WINDOWS_NT_RC_STRING}
//
// MessageId: DRIVER_POWER_STATE_FAILURE
//
// MessageText:
//
// DRIVER_POWER_STATE_FAILURE
//
DRIVER_POWER_STATE_FAILURE = ULONG($0000009F);
{$EXTERNALSYM DRIVER_POWER_STATE_FAILURE}
//
// MessageId: INTERNAL_POWER_ERROR
//
// MessageText:
//
// INTERNAL_POWER_ERROR
//
INTERNAL_POWER_ERROR = ULONG($000000A0);
{$EXTERNALSYM INTERNAL_POWER_ERROR}
//
// MessageId: PCI_BUS_DRIVER_INTERNAL
//
// MessageText:
//
// Inconsistency detected in the PCI Bus driver's internal structures.
//
PCI_BUS_DRIVER_INTERNAL = ULONG($000000A1);
{$EXTERNALSYM PCI_BUS_DRIVER_INTERNAL}
//
// MessageId: MEMORY_IMAGE_CORRUPT
//
// MessageText:
//
// A CRC check on the memory range has failed
//
MEMORY_IMAGE_CORRUPT = ULONG($000000A2);
{$EXTERNALSYM MEMORY_IMAGE_CORRUPT}
//
// MessageId: ACPI_DRIVER_INTERNAL
//
// MessageText:
//
// ACPI_DRIVER_INTERNAL
//
ACPI_DRIVER_INTERNAL = ULONG($000000A3);
{$EXTERNALSYM ACPI_DRIVER_INTERNAL}
//
// MessageId: CNSS_FILE_SYSTEM_FILTER
//
// MessageText:
//
// Internal inconsistency while representing
// Ntfs Structured Storage as a DOCFILE.
//
CNSS_FILE_SYSTEM_FILTER = ULONG($000000A4);
{$EXTERNALSYM CNSS_FILE_SYSTEM_FILTER}
//
// MessageId: ACPI_BIOS_ERROR
//
// MessageText:
//
// The ACPI BIOS in this system is not fully compliant with the ACPI
// specification. Please read the README.TXT for possible workarounds. You
// can also contact your system's manufacturer for an updated BIOS, or visit
// http://www.hardware-update.com to see if a new BIOS is available.
//
ACPI_BIOS_ERROR = ULONG($000000A5);
{$EXTERNALSYM ACPI_BIOS_ERROR}
//
// MessageId: FP_EMULATION_ERROR
//
// MessageText:
//
// FP_EMULATION_ERROR
//
FP_EMULATION_ERROR = ULONG($000000A6);
{$EXTERNALSYM FP_EMULATION_ERROR}
//
// MessageId: BAD_EXHANDLE
//
// MessageText:
//
// BAD_EXHANDLE
//
BAD_EXHANDLE = ULONG($000000A7);
{$EXTERNALSYM BAD_EXHANDLE}
//
// MessageId: BOOTING_IN_SAFEMODE_MINIMAL
//
// MessageText:
//
// The system is booting in safemode - Minimal Services
//
BOOTING_IN_SAFEMODE_MINIMAL = ULONG($000000A8);
{$EXTERNALSYM BOOTING_IN_SAFEMODE_MINIMAL}
//
// MessageId: BOOTING_IN_SAFEMODE_NETWORK
//
// MessageText:
//
// The system is booting in safemode - Minimal Services with Network
//
BOOTING_IN_SAFEMODE_NETWORK = ULONG($000000A9);
{$EXTERNALSYM BOOTING_IN_SAFEMODE_NETWORK}
//
// MessageId: BOOTING_IN_SAFEMODE_DSREPAIR
//
// MessageText:
//
// The system is booting in safemode - Directory Services Repair
//
BOOTING_IN_SAFEMODE_DSREPAIR = ULONG($000000AA);
{$EXTERNALSYM BOOTING_IN_SAFEMODE_DSREPAIR}
//
// MessageId: SESSION_HAS_VALID_POOL_ON_EXIT
//
// MessageText:
//
// SESSION_HAS_VALID_POOL_ON_EXIT
//
SESSION_HAS_VALID_POOL_ON_EXIT = ULONG($000000AB);
{$EXTERNALSYM SESSION_HAS_VALID_POOL_ON_EXIT}
//
// MessageId: HAL_MEMORY_ALLOCATION
//
// MessageText:
//
// Allocate from NonPaged Pool failed for a HAL critical allocation.
//
HAL_MEMORY_ALLOCATION = ULONG($000000AC);
{$EXTERNALSYM HAL_MEMORY_ALLOCATION}
//
// MessageId: BUGCODE_PSS_MESSAGE_A
//
// MessageText:
//
// If this is the first time you've seen this Stop error screen,
// restart your computer. If this screen appears again, follow
// these steps:
//
// Check to make sure any new hardware or software is properly installed.
// If this is a new installation, ask your hardware or software manufacturer
// for any Windows 2000 updates you might need.
//
// If problems continue, disable or remove any newly installed hardware
// or software. Disable BIOS memory options such as caching or shadowing.
// Check your hard drive to make sure it is properly configured and
// terminated. If you need to use Safe Mode to remove or disable components,
// restart your computer, press F8 to select Advanced Startup Options,
// and then select Safe Mode.
//
// Refer to your Getting Started manual for more information on
// troubleshooting Stop errors.
//
BUGCODE_PSS_MESSAGE_A = ULONG($000000AD);
{$EXTERNALSYM BUGCODE_PSS_MESSAGE_A}
//
// MessageId: BUGCODE_PSS_MESSAGE_1E
//
// MessageText:
//
// If this is the first time you've seen this Stop error screen,
// restart your computer. If this screen appears again, follow
// these steps:
//
// Check to be sure you have adequate disk space. If a driver is
// identified in the Stop message, disable the driver or check
// with the manufacturer for driver updates. Try changing video
// adapters.
//
// Check with your hardware vendor for any BIOS updates. Disable
// BIOS memory options such as caching or shadowing. If you need
// to use Safe Mode to remove or disable components, restart your
// computer, press F8 to select Advanced Startup Options, and then
// select Safe Mode.
//
// Refer to your Getting Started manual for more information on
// troubleshooting Stop errors.
//
BUGCODE_PSS_MESSAGE_1E = ULONG($000000AE);
{$EXTERNALSYM BUGCODE_PSS_MESSAGE_1E}
//
// MessageId: BUGCODE_PSS_MESSAGE_23
//
// MessageText:
//
// If this is the first time you've seen this Stop error screen,
// restart your computer. If this screen appears again, follow
// these steps:
//
// Disable or uninstall any anti-virus, disk defragmentation
// or backup utilities. Check your hard drive configuration,
// and check for any updated drivers. Run CHKDSK /F to check
// for hard drive corruption, and then restart your computer.
//
// Refer to your Getting Started manual for more information on
// troubleshooting Stop errors.
//
BUGCODE_PSS_MESSAGE_23 = ULONG($000000AF);
{$EXTERNALSYM BUGCODE_PSS_MESSAGE_23}
//
// MessageId: BUGCODE_PSS_MESSAGE_2E
//
// MessageText:
//
// If this is the first time you've seen this Stop error screen,
// restart your computer. If this screen appears again, follow
// these steps:
//
// Run system diagnostics supplied by your hardware manufacturer.
// In particular, run a memory check, and check for faulty or
// mismatched memory. Try changing video adapters.
//
// Check with your hardware vendor for any BIOS updates. Disable
// BIOS memory options such as caching or shadowing. If you need
// to use Safe Mode to remove or disable components, restart your
// computer, press F8 to select Advanced Startup Options, and then
// select Safe Mode.
//
// Refer to your Getting Started manual for more information on
// troubleshooting Stop errors.
//
BUGCODE_PSS_MESSAGE_2E = ULONG($000000B0);
{$EXTERNALSYM BUGCODE_PSS_MESSAGE_2E}
//
// MessageId: BUGCODE_PSS_MESSAGE_3F
//
// MessageText:
//
// If this is the first time you've seen this Stop error screen,
// restart your computer. If this screen appears again, follow
// these steps:
//
// Remove any recently installed software including backup
// utilities or disk-intensive applications.
//
// If you need to use Safe Mode to remove or disable components,
// restart your computer, press F8 to select Advanced Startup
// Options, and then select Safe Mode.
//
// Refer to your Getting Started manual for more information on
// troubleshooting Stop errors.
//
BUGCODE_PSS_MESSAGE_3F = ULONG($000000B1);
{$EXTERNALSYM BUGCODE_PSS_MESSAGE_3F}
//
// MessageId: BUGCODE_PSS_MESSAGE_7B
//
// MessageText:
//
// If this is the first time you've seen this Stop error screen,
// restart your computer. If this screen appears again, follow
// these steps:
//
// Check for viruses on your computer. Remove any newly installed
// hard drives or hard drive controllers. Check your hard drive
// to make sure it is properly configured and terminated.
// Run CHKDSK /F to check for hard drive corruption, and then
// restart your computer.
//
// Refer to your Getting Started manual for more information on
// troubleshooting Stop errors.
//
BUGCODE_PSS_MESSAGE_7B = ULONG($000000B2);
{$EXTERNALSYM BUGCODE_PSS_MESSAGE_7B}
//
// MessageId: BUGCODE_PSS_MESSAGE_7F
//
// MessageText:
//
// If this is the first time you've seen this Stop error screen,
// restart your computer. If this screen appears again, follow
// these steps:
//
// Run a system diagnostic utility supplied by your hardware manufacturer.
// In particular, run a memory check, and check for faulty or mismatched
// memory. Try changing video adapters.
//
// Disable or remove any newly installed hardware and drivers. Disable or
// remove any newly installed software. If you need to use Safe Mode to
// remove or disable components, restart your computer, press F8 to select
// Advanced Startup Options, and then select Safe Mode.
//
// Refer to your Getting Started manual for more information on
// troubleshooting Stop errors.
//
BUGCODE_PSS_MESSAGE_7F = ULONG($000000B3);
{$EXTERNALSYM BUGCODE_PSS_MESSAGE_7F}
//
// MessageId: VIDEO_DRIVER_INIT_FAILURE
//
// MessageText:
//
// The video driver failed to initialize
//
VIDEO_DRIVER_INIT_FAILURE = ULONG($000000B4);
{$EXTERNALSYM VIDEO_DRIVER_INIT_FAILURE}
//
// MessageId: BOOTLOG_LOADED
//
// MessageText:
//
// Loaded driver
//
BOOTLOG_LOADED = ULONG($000000B5);
{$EXTERNALSYM BOOTLOG_LOADED}
//
// MessageId: BOOTLOG_NOT_LOADED
//
// MessageText:
//
// Did not load driver
//
BOOTLOG_NOT_LOADED = ULONG($000000B6);
{$EXTERNALSYM BOOTLOG_NOT_LOADED}
//
// MessageId: BOOTLOG_ENABLED
//
// MessageText:
//
// Boot Logging Enabled
//
BOOTLOG_ENABLED = ULONG($000000B7);
{$EXTERNALSYM BOOTLOG_ENABLED}
//
// MessageId: ATTEMPTED_SWITCH_FROM_DPC
//
// MessageText:
//
// A wait operation, attach process, or yield was attempted from a DPC routine.
//
ATTEMPTED_SWITCH_FROM_DPC = ULONG($000000B8);
{$EXTERNALSYM ATTEMPTED_SWITCH_FROM_DPC}
//
// MessageId: CHIPSET_DETECTED_ERROR
//
// MessageText:
//
// A parity error in the system memory or I/O system was detected.
//
CHIPSET_DETECTED_ERROR = ULONG($000000B9);
{$EXTERNALSYM CHIPSET_DETECTED_ERROR}
//
// MessageId: SESSION_HAS_VALID_VIEWS_ON_EXIT
//
// MessageText:
//
// SESSION_HAS_VALID_VIEWS_ON_EXIT
//
SESSION_HAS_VALID_VIEWS_ON_EXIT = ULONG($000000BA);
{$EXTERNALSYM SESSION_HAS_VALID_VIEWS_ON_EXIT}
//
// MessageId: NETWORK_BOOT_INITIALIZATION_FAILED
//
// MessageText:
//
// An initialization failure occurred while attempting to boot from the network.
//
NETWORK_BOOT_INITIALIZATION_FAILED = ULONG($000000BB);
{$EXTERNALSYM NETWORK_BOOT_INITIALIZATION_FAILED}
//
// MessageId: NETWORK_BOOT_DUPLICATE_ADDRESS
//
// MessageText:
//
// A duplicate IP address was assigned to this machine while attempting to
// boot from the network.
//
NETWORK_BOOT_DUPLICATE_ADDRESS = ULONG($000000BC);
{$EXTERNALSYM NETWORK_BOOT_DUPLICATE_ADDRESS}
//
// MessageId: INVALID_HIBERNATED_STATE
//
// MessageText:
//
// The hibernated memory image does not match the current hardware configuration.
//
INVALID_HIBERNATED_STATE = ULONG($000000BD);
{$EXTERNALSYM INVALID_HIBERNATED_STATE}
//
// MessageId: ATTEMPTED_WRITE_TO_READONLY_MEMORY
//
// MessageText:
//
// An attempt was made to write to read-only memory.
//
ATTEMPTED_WRITE_TO_READONLY_MEMORY = ULONG($000000BE);
{$EXTERNALSYM ATTEMPTED_WRITE_TO_READONLY_MEMORY}
//
// MessageId: MUTEX_ALREADY_OWNED
//
// MessageText:
//
// MUTEX_ALREADY_OWNED
//
MUTEX_ALREADY_OWNED = ULONG($000000BF);
{$EXTERNALSYM MUTEX_ALREADY_OWNED}
//
// MessageId: PCI_CONFIG_SPACE_ACCESS_FAILURE
//
// MessageText:
//
// An attempt to access PCI configuration space failed.
//
PCI_CONFIG_SPACE_ACCESS_FAILURE = ULONG($000000C0);
{$EXTERNALSYM PCI_CONFIG_SPACE_ACCESS_FAILURE}
//
// MessageId: SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION
//
// MessageText:
//
// SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION
//
SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION = ULONG($000000C1);
{$EXTERNALSYM SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION}
//
// MessageId: BAD_POOL_CALLER
//
// MessageText:
//
// BAD_POOL_CALLER
//
BAD_POOL_CALLER = ULONG($000000C2);
{$EXTERNALSYM BAD_POOL_CALLER}
//
// MessageId: BUGCODE_PSS_MESSAGE_SIGNATURE
//
// MessageText:
//
//
// A system file that is owned by Windows 2000 was replaced by an application
// running on your system. The operating system detected this and tried to
// verify the validity of the file's signature. The operating system found that
// the file signature is not valid and put the original, correct file back
// so that your operating system will continue to function properly.
//
BUGCODE_PSS_MESSAGE_SIGNATURE = ULONG($000000C3);
{$EXTERNALSYM BUGCODE_PSS_MESSAGE_SIGNATURE}
//
// MessageId: DRIVER_VERIFIER_DETECTED_VIOLATION
//
// MessageText:
//
//
// A device driver attempting to corrupt the system has been caught.
// The faulty driver currently on the kernel stack must be replaced
// with a working version.
//
DRIVER_VERIFIER_DETECTED_VIOLATION = ULONG($000000C4);
{$EXTERNALSYM DRIVER_VERIFIER_DETECTED_VIOLATION}
//
// MessageId: DRIVER_CORRUPTED_EXPOOL
//
// MessageText:
//
//
// A device driver has corrupted the executive memory pool.
//
// If this is the first time you've seen this Stop error screen,
// restart your computer. If this screen appears again, follow
// these steps:
//
// Check to make sure any new hardware or software is properly installed.
// If this is a new installation, ask your hardware or software manufacturer
// for any Windows 2000 updates you might need.
//
// Run the driver verifier against any new (or suspect) drivers.
// If that doesn't reveal the corrupting driver, try enabling special pool.
// Both of these features are intended to catch the corruption at an earlier
// point where the offending driver can be identified.
//
// If you need to use Safe Mode to remove or disable components,
// restart your computer, press F8 to select Advanced Startup Options,
// and then select Safe Mode.
//
// Refer to your Getting Started manual for more information on
// troubleshooting Stop errors.
//
DRIVER_CORRUPTED_EXPOOL = ULONG($000000C5);
{$EXTERNALSYM DRIVER_CORRUPTED_EXPOOL}
//
// MessageId: DRIVER_CAUGHT_MODIFYING_FREED_POOL
//
// MessageText:
//
//
// A device driver attempting to corrupt the system has been caught.
// The faulty driver currently on the kernel stack must be replaced
// with a working version.
//
DRIVER_CAUGHT_MODIFYING_FREED_POOL = ULONG($000000C6);
{$EXTERNALSYM DRIVER_CAUGHT_MODIFYING_FREED_POOL}
//
// MessageId: TIMER_OR_DPC_INVALID
//
// MessageText:
//
//
// A kernel timer or DPC was found in memory which must not contain such
// items. Usually this is memory being freed. This is usually caused by
// a device driver that has not cleaned up properly before freeing memory.
//
TIMER_OR_DPC_INVALID = ULONG($000000C7);
{$EXTERNALSYM TIMER_OR_DPC_INVALID}
//
// MessageId: IRQL_UNEXPECTED_VALUE
//
// MessageText:
//
//
// The processor's IRQL is not valid for the currently executing context.
// This is a software error condition and is usually caused by a device
// driver changing IRQL and not restoring it to its previous value when
// it has finished its task.
//
IRQL_UNEXPECTED_VALUE = ULONG($000000C8);
{$EXTERNALSYM IRQL_UNEXPECTED_VALUE}
//
// MessageId: DRIVER_VERIFIER_IOMANAGER_VIOLATION
//
// MessageText:
//
//
// The IO manager has detected a violation by a driver that is being verified.
// The faulty driver that is being verified must be debugged and
// replaced with a working version.
//
DRIVER_VERIFIER_IOMANAGER_VIOLATION = ULONG($000000C9);
{$EXTERNALSYM DRIVER_VERIFIER_IOMANAGER_VIOLATION}
//
// MessageId: PNP_DETECTED_FATAL_ERROR
//
// MessageText:
//
//
// Plug and Play detected an error most likely caused by a faulty driver.
//
PNP_DETECTED_FATAL_ERROR = ULONG($000000CA);
{$EXTERNALSYM PNP_DETECTED_FATAL_ERROR}
//
// MessageId: DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS
//
// MessageText:
//
// DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS
//
DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS = ULONG($000000CB);
{$EXTERNALSYM DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS}
//
// MessageId: PAGE_FAULT_IN_FREED_SPECIAL_POOL
//
// MessageText:
//
//
// The system is attempting to access memory after it has been freed.
// This usually indicates a system-driver synchronization issue.
//
PAGE_FAULT_IN_FREED_SPECIAL_POOL = ULONG($000000CC);
{$EXTERNALSYM PAGE_FAULT_IN_FREED_SPECIAL_POOL}
//
// MessageId: PAGE_FAULT_BEYOND_END_OF_ALLOCATION
//
// MessageText:
//
//
// The system is attempting to access memory beyond the end of the allocation.
// This usually indicates a system-driver synchronization issue.
//
PAGE_FAULT_BEYOND_END_OF_ALLOCATION = ULONG($000000CD);
{$EXTERNALSYM PAGE_FAULT_BEYOND_END_OF_ALLOCATION}
//
// MessageId: DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS
//
// MessageText:
//
// DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS
//
DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS = ULONG($000000CE);
{$EXTERNALSYM DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS}
//
// MessageId: TERMINAL_SERVER_DRIVER_MADE_INCORRECT_MEMORY_REFERENCE
//
// MessageText:
//
// TERMINAL_SERVER_DRIVER_MADE_INCORRECT_MEMORY_REFERENCE
//
TERMINAL_SERVER_DRIVER_MADE_INCORRECT_MEMORY_REFERENCE = ULONG($000000CF);
{$EXTERNALSYM TERMINAL_SERVER_DRIVER_MADE_INCORRECT_MEMORY_REFERENCE}
//
// MessageId: DRIVER_CORRUPTED_MMPOOL
//
// MessageText:
//
//
// A device driver has corrupted the system memory management pool.
//
// If this is the first time you've seen this Stop error screen,
// restart your computer. If this screen appears again, follow
// these steps:
//
// Check to make sure any new hardware or software is properly installed.
// If this is a new installation, ask your hardware or software manufacturer
// for any Windows 2000 updates you might need.
//
// Run the driver verifier against any new (or suspect) drivers.
// If that doesn't reveal the corrupting driver, try enabling special pool.
// Both of these features are intended to catch the corruption at an earlier
// point where the offending driver can be identified.
//
// If you need to use Safe Mode to remove or disable components,
// restart your computer, press F8 to select Advanced Startup Options,
// and then select Safe Mode.
//
// Refer to your Getting Started manual for more information on
// troubleshooting Stop errors.
//
DRIVER_CORRUPTED_MMPOOL = ULONG($000000D0);
{$EXTERNALSYM DRIVER_CORRUPTED_MMPOOL}
//
// MessageId: DRIVER_IRQL_NOT_LESS_OR_EQUAL
//
// MessageText:
//
// DRIVER_IRQL_NOT_LESS_OR_EQUAL
//
DRIVER_IRQL_NOT_LESS_OR_EQUAL = ULONG($000000D1);
{$EXTERNALSYM DRIVER_IRQL_NOT_LESS_OR_EQUAL}
//
// MessageId: BUGCODE_ID_DRIVER
//
// MessageText:
//
// This driver may be at fault :
//
BUGCODE_ID_DRIVER = ULONG($000000D2);
{$EXTERNALSYM BUGCODE_ID_DRIVER}
//
// MessageId: DRIVER_PORTION_MUST_BE_NONPAGED
//
// MessageText:
//
// The driver mistakenly marked a part of it's image pagable instead of nonpagable.
//
DRIVER_PORTION_MUST_BE_NONPAGED = ULONG($000000D3);
{$EXTERNALSYM DRIVER_PORTION_MUST_BE_NONPAGED}
//
// MessageId: SYSTEM_SCAN_AT_RAISED_IRQL_CAUGHT_IMPROPER_DRIVER_UNLOAD
//
// MessageText:
//
// The driver unloaded without cancelling pending operations.
//
SYSTEM_SCAN_AT_RAISED_IRQL_CAUGHT_IMPROPER_DRIVER_UNLOAD = ULONG($000000D4);
{$EXTERNALSYM SYSTEM_SCAN_AT_RAISED_IRQL_CAUGHT_IMPROPER_DRIVER_UNLOAD}
//
// MessageId: DRIVER_PAGE_FAULT_IN_FREED_SPECIAL_POOL
//
// MessageText:
//
//
// The driver is attempting to access memory after it has been freed.
//
DRIVER_PAGE_FAULT_IN_FREED_SPECIAL_POOL = ULONG($000000D5);
{$EXTERNALSYM DRIVER_PAGE_FAULT_IN_FREED_SPECIAL_POOL}
//
// MessageId: DRIVER_PAGE_FAULT_BEYOND_END_OF_ALLOCATION
//
// MessageText:
//
//
// The driver is attempting to access memory beyond the end of the allocation.
//
DRIVER_PAGE_FAULT_BEYOND_END_OF_ALLOCATION = ULONG($000000D6);
{$EXTERNALSYM DRIVER_PAGE_FAULT_BEYOND_END_OF_ALLOCATION}
//
// MessageId: DRIVER_UNMAPPING_INVALID_VIEW
//
// MessageText:
//
//
// The driver is attempting to unmap an invalid memory address.
//
DRIVER_UNMAPPING_INVALID_VIEW = ULONG($000000D7);
{$EXTERNALSYM DRIVER_UNMAPPING_INVALID_VIEW}
//
// MessageId: DRIVER_USED_EXCESSIVE_PTES
//
// MessageText:
//
//
// The driver has used an excessive number of system PTEs.
//
DRIVER_USED_EXCESSIVE_PTES = ULONG($000000D8);
{$EXTERNALSYM DRIVER_USED_EXCESSIVE_PTES}
//
// MessageId: LOCKED_PAGES_TRACKER_CORRUPTION
//
// MessageText:
//
//
// The driver is corrupting the locked pages tracking structures.
//
LOCKED_PAGES_TRACKER_CORRUPTION = ULONG($000000D9);
{$EXTERNALSYM LOCKED_PAGES_TRACKER_CORRUPTION}
//
// MessageId: SYSTEM_PTE_MISUSE
//
// MessageText:
//
//
// The driver is mismanaging system PTEs.
//
SYSTEM_PTE_MISUSE = ULONG($000000DA);
{$EXTERNALSYM SYSTEM_PTE_MISUSE}
//
// MessageId: DRIVER_CORRUPTED_SYSPTES
//
// MessageText:
//
//
// A driver has corrupted the memory management system PTEs.
//
DRIVER_CORRUPTED_SYSPTES = ULONG($000000DB);
{$EXTERNALSYM DRIVER_CORRUPTED_SYSPTES}
//
// MessageId: DRIVER_INVALID_STACK_ACCESS
//
// MessageText:
//
//
// A driver accessed a stack address that lies below the current stack pointer
// of the stack's thread.
//
DRIVER_INVALID_STACK_ACCESS = ULONG($000000DC);
{$EXTERNALSYM DRIVER_INVALID_STACK_ACCESS}
//
// MessageId: BUGCODE_PSS_MESSAGE_A5
//
// MessageText:
//
//
// The BIOS in this system is not fully ACPI compliant. Please contact your
// system vendor or visit http://www.hardware-update.com for an updated BIOS.
// If you are unable to obtain an updated BIOS or the latest BIOS supplied by
// your vendor is not ACPI compliant, you can turn off ACPI mode during text
// mode setup. To do this, simply press the F7 key when you are prompted to
// install storage drivers. The system will not notify you that the F7 key
// was pressed - it will silently disable ACPI and allow you to continue
// your installation.
//
BUGCODE_PSS_MESSAGE_A5 = ULONG($000000DD);
{$EXTERNALSYM BUGCODE_PSS_MESSAGE_A5}
//
// MessageId: POOL_CORRUPTION_IN_FILE_AREA
//
// MessageText:
//
//
// A driver corrupted pool memory used for holding pages destined for disk.
//
POOL_CORRUPTION_IN_FILE_AREA = ULONG($000000DE);
{$EXTERNALSYM POOL_CORRUPTION_IN_FILE_AREA}
//
// MessageId: HARDWARE_PROFILE_UNDOCKED_STRING
//
// MessageText:
//
// Undocked Profile
//
HARDWARE_PROFILE_UNDOCKED_STRING = ULONG($40010001);
{$EXTERNALSYM HARDWARE_PROFILE_UNDOCKED_STRING}
//
// MessageId: HARDWARE_PROFILE_DOCKED_STRING
//
// MessageText:
//
// Docked Profile
//
HARDWARE_PROFILE_DOCKED_STRING = ULONG($40010002);
{$EXTERNALSYM HARDWARE_PROFILE_DOCKED_STRING}
//
// MessageId: HARDWARE_PROFILE_UNKNOWN_STRING
//
// MessageText:
//
// Profile
//
HARDWARE_PROFILE_UNKNOWN_STRING = ULONG($40010003);
{$EXTERNALSYM HARDWARE_PROFILE_UNKNOWN_STRING}
//
// MessageId: IMPERSONATING_WORKER_THREAD
//
// MessageText:
//
//
// A worker thread is impersonating another process. The work item forgot to
// disable impersonation before it returned.
//
IMPERSONATING_WORKER_THREAD = ULONG($000000DF);
{$EXTERNALSYM IMPERSONATING_WORKER_THREAD}
//
// MessageId: ACPI_BIOS_FATAL_ERROR
//
// MessageText:
//
//
// Your computer (BIOS) has reported that a component in your system is faulty and
// has prevented Windows from operating. You can determine which component is
// faulty by running the diagnostic disk or tool that came with your computer.
//
// If you do not have this tool, you must contact your system vendor and report
// this error message to them. They will be able to assist you in correcting this
// hardware problem thereby allowing Windows to operate.
//
ACPI_BIOS_FATAL_ERROR = ULONG($000000E0);
{$EXTERNALSYM ACPI_BIOS_FATAL_ERROR}
//
// MessageId: WORKER_THREAD_RETURNED_AT_BAD_IRQL
//
// MessageText:
//
// WORKER_THREAD_RETURNED_AT_BAD_IRQL
//
WORKER_THREAD_RETURNED_AT_BAD_IRQL = ULONG($000000E1);
{$EXTERNALSYM WORKER_THREAD_RETURNED_AT_BAD_IRQL}
//
// MessageId: MANUALLY_INITIATED_CRASH
//
// MessageText:
//
//
// The end-user manually generated the crashdump.
//
MANUALLY_INITIATED_CRASH = ULONG($000000E2);
{$EXTERNALSYM MANUALLY_INITIATED_CRASH}
//
// MessageId: RESOURCE_NOT_OWNED
//
// MessageText:
//
//
// A thread tried to release a resource it did not own.
//
RESOURCE_NOT_OWNED = ULONG($000000E3);
{$EXTERNALSYM RESOURCE_NOT_OWNED}
//
// MessageId: WORKER_INVALID
//
// MessageText:
//
//
// A executive worker item was found in memory which must not contain such
// items. Usually this is memory being freed. This is usually caused by
// a device driver that has not cleaned up properly before freeing memory.
//
WORKER_INVALID = ULONG($000000E4);
{$EXTERNALSYM WORKER_INVALID}
{$ENDIF JWA_IMPLEMENTATIONSECTION}
{$IFNDEF JWA_OMIT_SECTIONS}
implementation
//uses ...
{$ENDIF JWA_OMIT_SECTIONS}
{$IFNDEF JWA_INTERFACESECTION}
//your implementation here
{$ENDIF JWA_INTERFACESECTION}
{$IFNDEF JWA_OMIT_SECTIONS}
end.
{$ENDIF JWA_OMIT_SECTIONS}