Repository URL to install this package:
Version:
3.0.0 ▾
|
{******************************************************************************}
{ }
{ Lan Manager Use API interface Unit for Object Pascal }
{ }
{ Portions created by Microsoft are Copyright (C) 1995-2001 Microsoft }
{ Corporation. All Rights Reserved. }
{ }
{ The original file is: lmuse.h, released November 2001. The original Pascal }
{ code is: LmUse.pas, released Februari 2002. The initial developer of the }
{ Pascal code is Marcel van Brakel (brakelm att chello dott nl). }
{ }
{ Portions created by Marcel van Brakel are Copyright (C) 1999-2001 }
{ Marcel van Brakel. All Rights Reserved. }
{ }
{ Obtained through: Joint Endeavour of Delphi Innovators (Project JEDI) }
{ }
{ You may retrieve the latest version of this file at the Project JEDI }
{ APILIB home page, located at http://jedi-apilib.sourceforge.net }
{ }
{ The contents of this file are used with permission, subject to the Mozilla }
{ Public License Version 1.1 (the "License"); you may not use this file except }
{ in compliance with the License. You may obtain a copy of the License at }
{ http://www.mozilla.org/MPL/MPL-1.1.html }
{ }
{ Software distributed under the License is distributed on an "AS IS" basis, }
{ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for }
{ the specific language governing rights and limitations under the License. }
{ }
{ Alternatively, the contents of this file may be used under the terms of the }
{ GNU Lesser General Public License (the "LGPL License"), in which case the }
{ provisions of the LGPL License are applicable instead of those above. }
{ If you wish to allow use of your version of this file only under the terms }
{ of the LGPL License and not to allow others to use your version of this file }
{ under the MPL, indicate your decision by deleting the provisions above and }
{ replace them with the notice and other provisions required by the LGPL }
{ License. If you do not delete the provisions above, a recipient may use }
{ your version of this file under either the MPL or the LGPL License. }
{ }
{ For more information about the LGPL: http://www.gnu.org/copyleft/lesser.html }
{ }
{******************************************************************************}
// $Id: JwaLmUse.pas,v 1.11 2007/09/05 11:58:51 dezipaitor Exp $
{$IFNDEF JWA_OMIT_SECTIONS_LM}
unit JwaLmUse;
{$WEAKPACKAGEUNIT}
{$ENDIF JWA_OMIT_SECTIONS_LM}
{$HPPEMIT ''}
{$HPPEMIT '#include "lmuse.h"'}
{$HPPEMIT ''}
{$IFNDEF JWA_OMIT_SECTIONS_LM}
{$I jediapilib.inc}
interface
uses
JwaLmCons, JwaWinType;
{$ENDIF JWA_OMIT_SECTIONS_LM}
{$IFNDEF JWA_IMPLEMENTATIONSECTION}
//
// Function Prototypes
//
function NetUseAdd(UncServerName: LMSTR; Level: DWORD; Buf: LPBYTE; ParmError: LPDWORD): NET_API_STATUS; stdcall;
{$EXTERNALSYM NetUseAdd}
function NetUseDel(UncServerName: LMSTR; UseName: LMSTR; ForceCond: DWORD): NET_API_STATUS; stdcall;
{$EXTERNALSYM NetUseDel}
function NetUseEnum(UncServerName: LMSTR; Level: DWORD; var BufPtr: LPBYTE; PreferedMaximumSize: DWORD; EntriesRead: LPDWORD; TotalEntries: LPDWORD; ResumeHandle: LPDWORD): NET_API_STATUS; stdcall;
{$EXTERNALSYM NetUseEnum}
function NetUseGetInfo(UncServerName: LMSTR; UseName: LMSTR; Level: DWORD; var BufPtr: LPBYTE): NET_API_STATUS; stdcall;
{$EXTERNALSYM NetUseGetInfo}
//
// Data Structures
//
type
_USE_INFO_0 = record
ui0_local: LMSTR;
ui0_remote: LMSTR;
end;
{$EXTERNALSYM _USE_INFO_0}
USE_INFO_0 = _USE_INFO_0;
{$EXTERNALSYM USE_INFO_0}
PUSE_INFO_0 = ^USE_INFO_0;
{$EXTERNALSYM PUSE_INFO_0}
LPUSE_INFO_0 = ^USE_INFO_0;
{$EXTERNALSYM LPUSE_INFO_0}
TUseInfo0 = USE_INFO_0;
PUseInfo0 = PUSE_INFO_0;
_USE_INFO_1 = record
ui1_local: LMSTR;
ui1_remote: LMSTR;
ui1_password: LMSTR;
ui1_status: DWORD;
ui1_asg_type: DWORD;
ui1_refcount: DWORD;
ui1_usecount: DWORD;
end;
{$EXTERNALSYM _USE_INFO_1}
USE_INFO_1 = _USE_INFO_1;
{$EXTERNALSYM USE_INFO_1}
PUSE_INFO_1 = ^USE_INFO_1;
{$EXTERNALSYM PUSE_INFO_1}
LPUSE_INFO_1 = ^USE_INFO_1;
{$EXTERNALSYM LPUSE_INFO_1}
TUseInfo1 = USE_INFO_1;
PUseInfo1 = PUSE_INFO_1;
_USE_INFO_2 = record
ui2_local: LMSTR;
ui2_remote: LMSTR;
ui2_password: LMSTR;
ui2_status: DWORD;
ui2_asg_type: DWORD;
ui2_refcount: DWORD;
ui2_usecount: DWORD;
ui2_username: LMSTR;
ui2_domainname: LMSTR;
end;
{$EXTERNALSYM _USE_INFO_2}
USE_INFO_2 = _USE_INFO_2;
{$EXTERNALSYM USE_INFO_2}
PUSE_INFO_2 = ^USE_INFO_2;
{$EXTERNALSYM PUSE_INFO_2}
LPUSE_INFO_2 = ^USE_INFO_2;
{$EXTERNALSYM LPUSE_INFO_2}
TUseInfo2 = USE_INFO_2;
PUseInfo2 = PUSE_INFO_2;
_USE_INFO_3 = record
ui3_ui2: USE_INFO_2;
ui3_flags: ULONG;
end;
{$EXTERNALSYM _USE_INFO_3}
USE_INFO_3 = _USE_INFO_3;
{$EXTERNALSYM USE_INFO_3}
PUSE_INFO_3 = ^USE_INFO_3;
{$EXTERNALSYM PUSE_INFO_3}
LPUSE_INFO_3 = ^USE_INFO_3;
{$EXTERNALSYM LPUSE_INFO_3}
TUseInfo3 = USE_INFO_3;
PUseInfo3 = PUSE_INFO_3;
//
// Special Values and Constants
//
//
// One of these values indicates the parameter within an information
// structure that is invalid when ERROR_INVALID_PARAMETER is returned by
// NetUseAdd.
//
const
USE_LOCAL_PARMNUM = 1;
{$EXTERNALSYM USE_LOCAL_PARMNUM}
USE_REMOTE_PARMNUM = 2;
{$EXTERNALSYM USE_REMOTE_PARMNUM}
USE_PASSWORD_PARMNUM = 3;
{$EXTERNALSYM USE_PASSWORD_PARMNUM}
USE_ASGTYPE_PARMNUM = 4;
{$EXTERNALSYM USE_ASGTYPE_PARMNUM}
USE_USERNAME_PARMNUM = 5;
{$EXTERNALSYM USE_USERNAME_PARMNUM}
USE_DOMAINNAME_PARMNUM = 6;
{$EXTERNALSYM USE_DOMAINNAME_PARMNUM}
//
// Values appearing in the ui1_status field of use_info_1 structure.
// Note that USE_SESSLOST and USE_DISCONN are synonyms.
//
USE_OK = 0;
{$EXTERNALSYM USE_OK}
USE_PAUSED = 1;
{$EXTERNALSYM USE_PAUSED}
USE_SESSLOST = 2;
{$EXTERNALSYM USE_SESSLOST}
USE_DISCONN = 2;
{$EXTERNALSYM USE_DISCONN}
USE_NETERR = 3;
{$EXTERNALSYM USE_NETERR}
USE_CONN = 4;
{$EXTERNALSYM USE_CONN}
USE_RECONN = 5;
{$EXTERNALSYM USE_RECONN}
//
// Values of the ui1_asg_type field of use_info_1 structure
//
USE_WILDCARD = DWORD(-1);
{$EXTERNALSYM USE_WILDCARD}
USE_DISKDEV = 0;
{$EXTERNALSYM USE_DISKDEV}
USE_SPOOLDEV = 1;
{$EXTERNALSYM USE_SPOOLDEV}
USE_CHARDEV = 2;
{$EXTERNALSYM USE_CHARDEV}
USE_IPC = 3;
{$EXTERNALSYM USE_IPC}
//
// Flags defined in the use_info_3 structure
//
CREATE_NO_CONNECT = $1; // creation flags
{$EXTERNALSYM CREATE_NO_CONNECT}
CREATE_BYPASS_CSC = $2; // force connection to server, bypassing CSC
{$EXTERNALSYM CREATE_BYPASS_CSC}
// all ops on this connection go to the server,
// never to the cache
USE_DEFAULT_CREDENTIALS = $4; // No explicit credentials passed to NetUseAdd
{$EXTERNALSYM USE_DEFAULT_CREDENTIALS}
{$ENDIF JWA_IMPLEMENTATIONSECTION}
{$IFNDEF JWA_OMIT_SECTIONS_LM}
implementation
//uses ...
{$ENDIF JWA_OMIT_SECTIONS_LM}
{$IFNDEF JWA_INTERFACESECTION}
{$IFDEF DYNAMIC_LINK}
var
_NetUseAdd: Pointer;
function NetUseAdd;
begin
GetProcedureAddress(_NetUseAdd, netapi32, 'NetUseAdd');
asm
MOV ESP, EBP
POP EBP
JMP [_NetUseAdd]
end;
end;
var
_NetUseDel: Pointer;
function NetUseDel;
begin
GetProcedureAddress(_NetUseDel, netapi32, 'NetUseDel');
asm
MOV ESP, EBP
POP EBP
JMP [_NetUseDel]
end;
end;
var
_NetUseEnum: Pointer;
function NetUseEnum;
begin
GetProcedureAddress(_NetUseEnum, netapi32, 'NetUseEnum');
asm
MOV ESP, EBP
POP EBP
JMP [_NetUseEnum]
end;
end;
var
_NetUseGetInfo: Pointer;
function NetUseGetInfo;
begin
GetProcedureAddress(_NetUseGetInfo, netapi32, 'NetUseGetInfo');
asm
MOV ESP, EBP
POP EBP
JMP [_NetUseGetInfo]
end;
end;
{$ELSE}
function NetUseAdd; external netapi32 name 'NetUseAdd';
function NetUseDel; external netapi32 name 'NetUseDel';
function NetUseEnum; external netapi32 name 'NetUseEnum';
function NetUseGetInfo; external netapi32 name 'NetUseGetInfo';
{$ENDIF DYNAMIC_LINK}
{$ENDIF JWA_INTERFACESECTION}
{$IFNDEF JWA_OMIT_SECTIONS_LM}
end.
{$ENDIF JWA_OMIT_SECTIONS_LM}