Why Gemfury?
Push, build, and install
RubyGems
npm packages
Python packages
Maven artifacts
PHP packages
Go Modules
Debian packages
RPM packages
NuGet packages
Repository URL to install this package:
|
Version:
3.0.0 ▾
|
{******************************************************************************}
{ }
{ Performance Data Helper Error Codes API interface Unit for Object Pascal }
{ }
{ Portions created by Microsoft are Copyright (C) 1995-2001 Microsoft }
{ Corporation. All Rights Reserved. }
{ }
{ The original file is: pdhmsg.h, released August 2001. The original Pascal }
{ code is: PdhMsg.pas, released December 2000. The initial developer of the }
{ Pascal code is Marcel van Brakel (brakelm att chello dott nl). }
{ }
{ Portions created by Marcel van Brakel are Copyright (C) 1999-2001 }
{ Marcel van Brakel. All Rights Reserved. }
{ }
{ Obtained through: Joint Endeavour of Delphi Innovators (Project JEDI) }
{ }
{ You may retrieve the latest version of this file at the Project JEDI }
{ APILIB home page, located at http://jedi-apilib.sourceforge.net }
{ }
{ The contents of this file are used with permission, subject to the Mozilla }
{ Public License Version 1.1 (the "License"); you may not use this file except }
{ in compliance with the License. You may obtain a copy of the License at }
{ http://www.mozilla.org/MPL/MPL-1.1.html }
{ }
{ Software distributed under the License is distributed on an "AS IS" basis, }
{ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for }
{ the specific language governing rights and limitations under the License. }
{ }
{ Alternatively, the contents of this file may be used under the terms of the }
{ GNU Lesser General Public License (the "LGPL License"), in which case the }
{ provisions of the LGPL License are applicable instead of those above. }
{ If you wish to allow use of your version of this file only under the terms }
{ of the LGPL License and not to allow others to use your version of this file }
{ under the MPL, indicate your decision by deleting the provisions above and }
{ replace them with the notice and other provisions required by the LGPL }
{ License. If you do not delete the provisions above, a recipient may use }
{ your version of this file under either the MPL or the LGPL License. }
{ }
{ For more information about the LGPL: http://www.gnu.org/copyleft/lesser.html }
{ }
{******************************************************************************}
// $Id: JwaPdhMsg.pas,v 1.9 2007/09/14 06:48:46 marquardt Exp $
{$IFNDEF JWA_OMIT_SECTIONS}
unit JwaPdhMsg;
{$WEAKPACKAGEUNIT}
{$ENDIF JWA_OMIT_SECTIONS}
{$HPPEMIT ''}
{$HPPEMIT '#include "pdhmsg.h"'}
{$HPPEMIT ''}
{$IFNDEF JWA_OMIT_SECTIONS}
{$I jediapilib.inc}
interface
uses
JwaWinType;
{$ENDIF JWA_OMIT_SECTIONS}
{$IFNDEF JWA_IMPLEMENTATIONSECTION}
// PDH DLL messages
//
//
// Success Messages
//
// the Win32 error value ERROR_SUCCESS is used for success returns
//
// MESSAGE NAME FORMAT
//
// PDH_CSTATUS_... messages are data item status message and
// are returned in reference to the status of a data
// item
// PDH_... messages are returned by FUNCTIONS only and
// not used as data item status values
//
// Success Messages
// These messages are normally returned when the operation completed
// successfully.
//
//
// Values are 32 bit values layed out as follows:
//
// 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
// 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
// +---+-+-+-----------------------+-------------------------------+
// |Sev|C|R| Facility | Code |
// +---+-+-+-----------------------+-------------------------------+
//
// where
//
// Sev - is the severity code
//
// 00 - Success
// 01 - Informational
// 10 - Warning
// 11 - Error
//
// C - is the Customer code flag
//
// R - is a reserved bit
//
// Facility - is the facility code
//
// Code - is the facility's status code
//
//
// Define the facility codes
const
//
// Define the severity codes
//
{$IFNDEF JWA_INCLUDEMODE}
STATUS_SEVERITY_WARNING = $2;
{$EXTERNALSYM STATUS_SEVERITY_WARNING}
STATUS_SEVERITY_SUCCESS = $0;
{$EXTERNALSYM STATUS_SEVERITY_SUCCESS}
STATUS_SEVERITY_INFORMATIONAL = $1;
{$EXTERNALSYM STATUS_SEVERITY_INFORMATIONAL}
STATUS_SEVERITY_ERROR = $3;
{$EXTERNALSYM STATUS_SEVERITY_ERROR}
{$ENDIF JWA_INCLUDEMODE}
//
// MessageId: PDH_CSTATUS_VALID_DATA
//
// MessageText:
//
// The returned data is valid.
//
PDH_CSTATUS_VALID_DATA = DWORD($00000000);
{$EXTERNALSYM PDH_CSTATUS_VALID_DATA}
//
// MessageId: PDH_CSTATUS_NEW_DATA
//
// MessageText:
//
// The return data value is valid and different from the last sample.
//
PDH_CSTATUS_NEW_DATA = DWORD($00000001);
{$EXTERNALSYM PDH_CSTATUS_NEW_DATA}
//
// Informational messages
//
// None
//
// Warning Messages
// These messages are returned when the function has completed
// successfully but the results may be different than expected.
//
//
// MessageId: PDH_CSTATUS_NO_MACHINE
//
// MessageText:
//
// Unable to connect to specified machine or machine is off line.
//
PDH_CSTATUS_NO_MACHINE = DWORD($800007D0);
{$EXTERNALSYM PDH_CSTATUS_NO_MACHINE}
//
// MessageId: PDH_CSTATUS_NO_INSTANCE
//
// MessageText:
//
// The specified instance is not present.
//
PDH_CSTATUS_NO_INSTANCE = DWORD($800007D1);
{$EXTERNALSYM PDH_CSTATUS_NO_INSTANCE}
//
// MessageId: PDH_MORE_DATA
//
// MessageText:
//
// There is more data to return than would fit in the supplied buffer. Allocate
// a larger buffer and call the function again.
//
PDH_MORE_DATA = DWORD($800007D2);
{$EXTERNALSYM PDH_MORE_DATA}
//
// MessageId: PDH_CSTATUS_ITEM_NOT_VALIDATED
//
// MessageText:
//
// The data item has been added to the query, but has not been validated nor
// accessed. No other status information on this data item is available.
//
PDH_CSTATUS_ITEM_NOT_VALIDATED = DWORD($800007D3);
{$EXTERNALSYM PDH_CSTATUS_ITEM_NOT_VALIDATED}
//
// MessageId: PDH_RETRY
//
// MessageText:
//
// The selected operation should be retried.
//
PDH_RETRY = DWORD($800007D4);
{$EXTERNALSYM PDH_RETRY}
//
// MessageId: PDH_NO_DATA
//
// MessageText:
//
// No data to return.
//
PDH_NO_DATA = DWORD($800007D5);
{$EXTERNALSYM PDH_NO_DATA}
//
// MessageId: PDH_CALC_NEGATIVE_DENOMINATOR
//
// MessageText:
//
// A counter with a negative denominator value was detected.
//
PDH_CALC_NEGATIVE_DENOMINATOR = DWORD($800007D6);
{$EXTERNALSYM PDH_CALC_NEGATIVE_DENOMINATOR}
//
// MessageId: PDH_CALC_NEGATIVE_TIMEBASE
//
// MessageText:
//
// A counter with a negative timebase value was detected.
//
PDH_CALC_NEGATIVE_TIMEBASE = DWORD($800007D7);
{$EXTERNALSYM PDH_CALC_NEGATIVE_TIMEBASE}
//
// MessageId: PDH_CALC_NEGATIVE_VALUE
//
// MessageText:
//
// A counter with a negative value was detected.
//
PDH_CALC_NEGATIVE_VALUE = DWORD($800007D8);
{$EXTERNALSYM PDH_CALC_NEGATIVE_VALUE}
//
// MessageId: PDH_DIALOG_CANCELLED
//
// MessageText:
//
// The user cancelled the dialog box.
//
PDH_DIALOG_CANCELLED = DWORD($800007D9);
{$EXTERNALSYM PDH_DIALOG_CANCELLED}
//
// MessageId: PDH_END_OF_LOG_FILE
//
// MessageText:
//
// The end of the log file was reached.
//
PDH_END_OF_LOG_FILE = DWORD($800007DA);
{$EXTERNALSYM PDH_END_OF_LOG_FILE}
//
// MessageId: PDH_ASYNC_QUERY_TIMEOUT
//
// MessageText:
//
// Time out while waiting for asynchronous counter collection thread to end.
//
PDH_ASYNC_QUERY_TIMEOUT = DWORD($800007DB);
{$EXTERNALSYM PDH_ASYNC_QUERY_TIMEOUT}
//
// MessageId: PDH_CANNOT_SET_DEFAULT_REALTIME_DATASOURCE
//
// MessageText:
//
// Cannot change default real-time data source. There are real-time query
// sessions collecting counter data.
//
PDH_CANNOT_SET_DEFAULT_REALTIME_DATASOURCE = DWORD($800007DC);
{$EXTERNALSYM PDH_CANNOT_SET_DEFAULT_REALTIME_DATASOURCE}
//
// Error Messages
// These messages are returned when the function could not complete
// as requested and some corrective action may be required by the
// the caller or the user.
//
//
// MessageId: PDH_CSTATUS_NO_OBJECT
//
// MessageText:
//
// The specified object is not found on the system.
//
PDH_CSTATUS_NO_OBJECT = DWORD($C0000BB8);
{$EXTERNALSYM PDH_CSTATUS_NO_OBJECT}
//
// MessageId: PDH_CSTATUS_NO_COUNTER
//
// MessageText:
//
// The specified counter could not be found.
//
PDH_CSTATUS_NO_COUNTER = DWORD($C0000BB9);
{$EXTERNALSYM PDH_CSTATUS_NO_COUNTER}
//
// MessageId: PDH_CSTATUS_INVALID_DATA
//
// MessageText:
//
// The returned data is not valid.
//
PDH_CSTATUS_INVALID_DATA = DWORD($C0000BBA);
{$EXTERNALSYM PDH_CSTATUS_INVALID_DATA}
//
// MessageId: PDH_MEMORY_ALLOCATION_FAILURE
//
// MessageText:
//
// A PDH function could not allocate enough temporary memory to complete the
// operation. Close some applications or extend the pagefile and retry the
// function.
//
PDH_MEMORY_ALLOCATION_FAILURE = DWORD($C0000BBB);
{$EXTERNALSYM PDH_MEMORY_ALLOCATION_FAILURE}
//
// MessageId: PDH_INVALID_HANDLE
//
// MessageText:
//
// The handle is not a valid PDH object.
//
PDH_INVALID_HANDLE = DWORD($C0000BBC);
{$EXTERNALSYM PDH_INVALID_HANDLE}
//
// MessageId: PDH_INVALID_ARGUMENT
//
// MessageText:
//
// A required argument is missing or incorrect.
//
PDH_INVALID_ARGUMENT = DWORD($C0000BBD);
{$EXTERNALSYM PDH_INVALID_ARGUMENT}
//
// MessageId: PDH_FUNCTION_NOT_FOUND
//
// MessageText:
//
// Unable to find the specified function.
//
PDH_FUNCTION_NOT_FOUND = DWORD($C0000BBE);
{$EXTERNALSYM PDH_FUNCTION_NOT_FOUND}
//
// MessageId: PDH_CSTATUS_NO_COUNTERNAME
//
// MessageText:
//
// No counter was specified.
//
PDH_CSTATUS_NO_COUNTERNAME = DWORD($C0000BBF);
{$EXTERNALSYM PDH_CSTATUS_NO_COUNTERNAME}
//
// MessageId: PDH_CSTATUS_BAD_COUNTERNAME
//
// MessageText:
//
// Unable to parse the counter path. Check the format and syntax of the
// specified path.
//
PDH_CSTATUS_BAD_COUNTERNAME = DWORD($C0000BC0);
{$EXTERNALSYM PDH_CSTATUS_BAD_COUNTERNAME}
//
// MessageId: PDH_INVALID_BUFFER
//
// MessageText:
//
// The buffer passed by the caller is invalid.
//
PDH_INVALID_BUFFER = DWORD($C0000BC1);
{$EXTERNALSYM PDH_INVALID_BUFFER}
//
// MessageId: PDH_INSUFFICIENT_BUFFER
//
// MessageText:
//
// The requested data is larger than the buffer supplied. Unable to return the
// requested data.
//
PDH_INSUFFICIENT_BUFFER = DWORD($C0000BC2);
{$EXTERNALSYM PDH_INSUFFICIENT_BUFFER}
//
// MessageId: PDH_CANNOT_CONNECT_MACHINE
//
// MessageText:
//
// Unable to connect to the requested machine.
//
PDH_CANNOT_CONNECT_MACHINE = DWORD($C0000BC3);
{$EXTERNALSYM PDH_CANNOT_CONNECT_MACHINE}
//
// MessageId: PDH_INVALID_PATH
//
// MessageText:
//
// The specified counter path could not be interpreted.
//
PDH_INVALID_PATH = DWORD($C0000BC4);
{$EXTERNALSYM PDH_INVALID_PATH}
//
// MessageId: PDH_INVALID_INSTANCE
//
// MessageText:
//
// The instance name could not be read from the specified counter path.
//
PDH_INVALID_INSTANCE = DWORD($C0000BC5);
{$EXTERNALSYM PDH_INVALID_INSTANCE}
//
// MessageId: PDH_INVALID_DATA
//
// MessageText:
//
// The data is not valid.
//
PDH_INVALID_DATA = DWORD($C0000BC6);
{$EXTERNALSYM PDH_INVALID_DATA}
//
// MessageId: PDH_NO_DIALOG_DATA
//
// MessageText:
//
// The dialog box data block was missing or invalid.
//
PDH_NO_DIALOG_DATA = DWORD($C0000BC7);
{$EXTERNALSYM PDH_NO_DIALOG_DATA}
//
// MessageId: PDH_CANNOT_READ_NAME_STRINGS
//
// MessageText:
//
// Unable to read the counter and/or explain text from the specified machine.
//
PDH_CANNOT_READ_NAME_STRINGS = DWORD($C0000BC8);
{$EXTERNALSYM PDH_CANNOT_READ_NAME_STRINGS}
//
// MessageId: PDH_LOG_FILE_CREATE_ERROR
//
// MessageText:
//
// Unable to create the specified log file.
//
PDH_LOG_FILE_CREATE_ERROR = DWORD($C0000BC9);
{$EXTERNALSYM PDH_LOG_FILE_CREATE_ERROR}
//
// MessageId: PDH_LOG_FILE_OPEN_ERROR
//
// MessageText:
//
// Unable to open the specified log file.
//
PDH_LOG_FILE_OPEN_ERROR = DWORD($C0000BCA);
{$EXTERNALSYM PDH_LOG_FILE_OPEN_ERROR}
//
// MessageId: PDH_LOG_TYPE_NOT_FOUND
//
// MessageText:
//
// The specified log file type has not been installed on this system.
//
PDH_LOG_TYPE_NOT_FOUND = DWORD($C0000BCB);
{$EXTERNALSYM PDH_LOG_TYPE_NOT_FOUND}
//
// MessageId: PDH_NO_MORE_DATA
//
// MessageText:
//
// No more data is available.
//
PDH_NO_MORE_DATA = DWORD($C0000BCC);
{$EXTERNALSYM PDH_NO_MORE_DATA}
//
// MessageId: PDH_ENTRY_NOT_IN_LOG_FILE
//
// MessageText:
//
// The specified record was not found in the log file.
//
PDH_ENTRY_NOT_IN_LOG_FILE = DWORD($C0000BCD);
{$EXTERNALSYM PDH_ENTRY_NOT_IN_LOG_FILE}
//
// MessageId: PDH_DATA_SOURCE_IS_LOG_FILE
//
// MessageText:
//
// The specified data source is a log file.
//
PDH_DATA_SOURCE_IS_LOG_FILE = DWORD($C0000BCE);
{$EXTERNALSYM PDH_DATA_SOURCE_IS_LOG_FILE}
//
// MessageId: PDH_DATA_SOURCE_IS_REAL_TIME
//
// MessageText:
//
// The specified data source is the current activity.
//
PDH_DATA_SOURCE_IS_REAL_TIME = DWORD($C0000BCF);
{$EXTERNALSYM PDH_DATA_SOURCE_IS_REAL_TIME}
//
// MessageId: PDH_UNABLE_READ_LOG_HEADER
//
// MessageText:
//
// The log file header could not be read.
//
PDH_UNABLE_READ_LOG_HEADER = DWORD($C0000BD0);
{$EXTERNALSYM PDH_UNABLE_READ_LOG_HEADER}
//
// MessageId: PDH_FILE_NOT_FOUND
//
// MessageText:
//
// Unable to find the specified file.
//
PDH_FILE_NOT_FOUND = DWORD($C0000BD1);
{$EXTERNALSYM PDH_FILE_NOT_FOUND}
//
// MessageId: PDH_FILE_ALREADY_EXISTS
//
// MessageText:
//
// There is already a file with the specified file name.
//
PDH_FILE_ALREADY_EXISTS = DWORD($C0000BD2);
{$EXTERNALSYM PDH_FILE_ALREADY_EXISTS}
//
// MessageId: PDH_NOT_IMPLEMENTED
//
// MessageText:
//
// The function referenced has not been implemented.
//
PDH_NOT_IMPLEMENTED = DWORD($C0000BD3);
{$EXTERNALSYM PDH_NOT_IMPLEMENTED}
//
// MessageId: PDH_STRING_NOT_FOUND
//
// MessageText:
//
// Unable to find the specified string in the list of performance name and
// explain text strings.
//
PDH_STRING_NOT_FOUND = DWORD($C0000BD4);
{$EXTERNALSYM PDH_STRING_NOT_FOUND}
//
// MessageId: PDH_UNABLE_MAP_NAME_FILES
//
// MessageText:
//
// Unable to map to the performance counter name data files. The data
// will be read from the registry and stored locally.
//
PDH_UNABLE_MAP_NAME_FILES = DWORD($80000BD5);
{$EXTERNALSYM PDH_UNABLE_MAP_NAME_FILES}
//
// MessageId: PDH_UNKNOWN_LOG_FORMAT
//
// MessageText:
//
// The format of the specified log file is not recognized by the PDH DLL.
//
PDH_UNKNOWN_LOG_FORMAT = DWORD($C0000BD6);
{$EXTERNALSYM PDH_UNKNOWN_LOG_FORMAT}
//
// MessageId: PDH_UNKNOWN_LOGSVC_COMMAND
//
// MessageText:
//
// The specified Log Service command value is not recognized.
//
PDH_UNKNOWN_LOGSVC_COMMAND = DWORD($C0000BD7);
{$EXTERNALSYM PDH_UNKNOWN_LOGSVC_COMMAND}
//
// MessageId: PDH_LOGSVC_QUERY_NOT_FOUND
//
// MessageText:
//
// The specified Query from the Log Service could not be found or could not
// be opened.
//
PDH_LOGSVC_QUERY_NOT_FOUND = DWORD($C0000BD8);
{$EXTERNALSYM PDH_LOGSVC_QUERY_NOT_FOUND}
//
// MessageId: PDH_LOGSVC_NOT_OPENED
//
// MessageText:
//
// The Performance Data Log Service key could not be opened. This may be due
// to insufficient privilege or because the service has not been installed.
//
PDH_LOGSVC_NOT_OPENED = DWORD($C0000BD9);
{$EXTERNALSYM PDH_LOGSVC_NOT_OPENED}
//
// MessageId: PDH_WBEM_ERROR
//
// MessageText:
//
// An error occurred while accessing the WBEM data store.
//
PDH_WBEM_ERROR = DWORD($C0000BDA);
{$EXTERNALSYM PDH_WBEM_ERROR}
//
// MessageId: PDH_ACCESS_DENIED
//
// MessageText:
//
// Unable to access the desired machine or service. Check the permissions and
// authentication of the log service or the interactive user session against
// those on the machine or service being monitored.
//
PDH_ACCESS_DENIED = DWORD($C0000BDB);
{$EXTERNALSYM PDH_ACCESS_DENIED}
//
// MessageId: PDH_LOG_FILE_TOO_SMALL
//
// MessageText:
//
// The maximum log file size specified is too small to log the selected counters.
// No data will be recorded in this log file. Specify a smaller set of counters
// to log or a larger file size and retry this call.
//
PDH_LOG_FILE_TOO_SMALL = DWORD($C0000BDC);
{$EXTERNALSYM PDH_LOG_FILE_TOO_SMALL}
//
// MessageId: PDH_INVALID_DATASOURCE
//
// MessageText:
//
// Cannot connect to ODBC DataSource Name.
//
PDH_INVALID_DATASOURCE = DWORD($C0000BDD);
{$EXTERNALSYM PDH_INVALID_DATASOURCE}
//
// MessageId: PDH_INVALID_SQLDB
//
// MessageText:
//
// SQL Database does not contain a valid set of tables for Perfmon, use PdhCreateSQLTables.
//
PDH_INVALID_SQLDB = DWORD($C0000BDE);
{$EXTERNALSYM PDH_INVALID_SQLDB}
//
// MessageId: PDH_NO_COUNTERS
//
// MessageText:
//
// No counters were found for this Perfmon SQL Log Set.
//
PDH_NO_COUNTERS = DWORD($C0000BDF);
{$EXTERNALSYM PDH_NO_COUNTERS}
//
// MessageId: PDH_SQL_ALLOC_FAILED
//
// MessageText:
//
// Call to SQLAllocStmt failed with %1.
//
PDH_SQL_ALLOC_FAILED = DWORD($C0000BE0);
{$EXTERNALSYM PDH_SQL_ALLOC_FAILED}
//
// MessageId: PDH_SQL_ALLOCCON_FAILED
//
// MessageText:
//
// Call to SQLAllocConnect failed with %1.
//
PDH_SQL_ALLOCCON_FAILED = DWORD($C0000BE1);
{$EXTERNALSYM PDH_SQL_ALLOCCON_FAILED}
//
// MessageId: PDH_SQL_EXEC_DIRECT_FAILED
//
// MessageText:
//
// Call to SQLExecDirect failed with %1.
//
PDH_SQL_EXEC_DIRECT_FAILED = DWORD($C0000BE2);
{$EXTERNALSYM PDH_SQL_EXEC_DIRECT_FAILED}
//
// MessageId: PDH_SQL_FETCH_FAILED
//
// MessageText:
//
// Call to SQLFetch failed with %1.
//
PDH_SQL_FETCH_FAILED = DWORD($C0000BE3);
{$EXTERNALSYM PDH_SQL_FETCH_FAILED}
//
// MessageId: PDH_SQL_ROWCOUNT_FAILED
//
// MessageText:
//
// Call to SQLRowCount failed with %1.
//
PDH_SQL_ROWCOUNT_FAILED = DWORD($C0000BE4);
{$EXTERNALSYM PDH_SQL_ROWCOUNT_FAILED}
//
// MessageId: PDH_SQL_MORE_RESULTS_FAILED
//
// MessageText:
//
// Call to SQLMoreResults failed with %1.
//
PDH_SQL_MORE_RESULTS_FAILED = DWORD($C0000BE5);
{$EXTERNALSYM PDH_SQL_MORE_RESULTS_FAILED}
//
// MessageId: PDH_SQL_CONNECT_FAILED
//
// MessageText:
//
// Call to SQLConnect failed with %1.
//
PDH_SQL_CONNECT_FAILED = DWORD($C0000BE6);
{$EXTERNALSYM PDH_SQL_CONNECT_FAILED}
//
// MessageId: PDH_SQL_BIND_FAILED
//
// MessageText:
//
// Call to SQLBindCol failed with %1.
//
PDH_SQL_BIND_FAILED = DWORD($C0000BE7);
{$EXTERNALSYM PDH_SQL_BIND_FAILED}
//
// MessageId: PDH_CANNOT_CONNECT_WMI_SERVER
//
// MessageText:
//
// Unable to connect to the WMI server on requested machine.
//
PDH_CANNOT_CONNECT_WMI_SERVER = DWORD($C0000BE8);
{$EXTERNALSYM PDH_CANNOT_CONNECT_WMI_SERVER}
//
// MessageId: PDH_PLA_COLLECTION_ALREADY_RUNNING
//
// MessageText:
//
// Collection "%1!s!" is already running.
//
PDH_PLA_COLLECTION_ALREADY_RUNNING = DWORD($C0000BE9);
{$EXTERNALSYM PDH_PLA_COLLECTION_ALREADY_RUNNING}
//
// MessageId: PDH_PLA_ERROR_SCHEDULE_OVERLAP
//
// MessageText:
//
// The specified start time is after the end time.
//
PDH_PLA_ERROR_SCHEDULE_OVERLAP = DWORD($C0000BEA);
{$EXTERNALSYM PDH_PLA_ERROR_SCHEDULE_OVERLAP}
//
// MessageId: PDH_PLA_COLLECTION_NOT_FOUND
//
// MessageText:
//
// Collection "%1!s!" does not exist.
//
PDH_PLA_COLLECTION_NOT_FOUND = DWORD($C0000BEB);
{$EXTERNALSYM PDH_PLA_COLLECTION_NOT_FOUND}
//
// MessageId: PDH_PLA_ERROR_SCHEDULE_ELAPSED
//
// MessageText:
//
// The specified end time has already elapsed.
//
PDH_PLA_ERROR_SCHEDULE_ELAPSED = DWORD($C0000BEC);
{$EXTERNALSYM PDH_PLA_ERROR_SCHEDULE_ELAPSED}
//
// MessageId: PDH_PLA_ERROR_NOSTART
//
// MessageText:
//
// Collection "%1!s!" did not start, check the application event log for any errors.
//
PDH_PLA_ERROR_NOSTART = DWORD($C0000BED);
{$EXTERNALSYM PDH_PLA_ERROR_NOSTART}
//
// MessageId: PDH_PLA_ERROR_ALREADY_EXISTS
//
// MessageText:
//
// Collection "%1!s!" already exists.
//
PDH_PLA_ERROR_ALREADY_EXISTS = DWORD($C0000BEE);
{$EXTERNALSYM PDH_PLA_ERROR_ALREADY_EXISTS}
//
// MessageId: PDH_PLA_ERROR_TYPE_MISMATCH
//
// MessageText:
//
// There is a mismatch in the settings type.
//
PDH_PLA_ERROR_TYPE_MISMATCH = DWORD($C0000BEF);
{$EXTERNALSYM PDH_PLA_ERROR_TYPE_MISMATCH}
//
// MessageId: PDH_PLA_ERROR_FILEPATH
//
// MessageText:
//
// The information specified does not resolve to a valid path name.
//
PDH_PLA_ERROR_FILEPATH = DWORD($C0000BF0);
{$EXTERNALSYM PDH_PLA_ERROR_FILEPATH}
//
// MessageId: PDH_PLA_SERVICE_ERROR
//
// MessageText:
//
// The "Performance Logs & Alerts" service did not respond.
//
PDH_PLA_SERVICE_ERROR = DWORD($C0000BF1);
{$EXTERNALSYM PDH_PLA_SERVICE_ERROR}
//
// MessageId: PDH_PLA_VALIDATION_ERROR
//
// MessageText:
//
// The information passed is not valid.
//
PDH_PLA_VALIDATION_ERROR = DWORD($C0000BF2);
{$EXTERNALSYM PDH_PLA_VALIDATION_ERROR}
//
// MessageId: PDH_PLA_VALIDATION_WARNING
//
// MessageText:
//
// The information passed is not valid.
//
PDH_PLA_VALIDATION_WARNING = DWORD($80000BF3);
{$EXTERNALSYM PDH_PLA_VALIDATION_WARNING}
//
// MessageId: PDH_PLA_ERROR_NAME_TOO_LONG
//
// MessageText:
//
// The name supplied is too long.
//
PDH_PLA_ERROR_NAME_TOO_LONG = DWORD($C0000BF4);
{$EXTERNALSYM PDH_PLA_ERROR_NAME_TOO_LONG}
//
// MessageId: PDH_INVALID_SQL_LOG_FORMAT
//
// MessageText:
//
// SQL log format is incorrect. Correct format is "SQL:<DSN-name>!<LogSet-Name>".
//
PDH_INVALID_SQL_LOG_FORMAT = DWORD($C0000BF5);
{$EXTERNALSYM PDH_INVALID_SQL_LOG_FORMAT}
//
// MessageId: PDH_COUNTER_ALREADY_IN_QUERY
//
// MessageText:
//
// Performance counter in PdhAddCounter() call has already been added
// in the performance query. This counter is ignored.
//
PDH_COUNTER_ALREADY_IN_QUERY = DWORD($C0000BF6);
{$EXTERNALSYM PDH_COUNTER_ALREADY_IN_QUERY}
//
// MessageId: PDH_BINARY_LOG_CORRUPT
//
// MessageText:
//
// Unable to read counter information and data from input binary log files.
//
PDH_BINARY_LOG_CORRUPT = DWORD($C0000BF7);
{$EXTERNALSYM PDH_BINARY_LOG_CORRUPT}
//
// MessageId: PDH_LOG_SAMPLE_TOO_SMALL
//
// MessageText:
//
// At least one of the input binary log files contain fewer than two data samples.
//
PDH_LOG_SAMPLE_TOO_SMALL = DWORD($C0000BF8);
{$EXTERNALSYM PDH_LOG_SAMPLE_TOO_SMALL}
//
// MessageId: PDH_OS_LATER_VERSION
//
// MessageText:
//
// The version of the operating system on the computer named %1 is later than that on the local computer. This operation is not available from the local computer.
//
PDH_OS_LATER_VERSION = DWORD($C0000BF9);
{$EXTERNALSYM PDH_OS_LATER_VERSION}
//
// MessageId: PDH_OS_EARLIER_VERSION
//
// MessageText:
//
// %1 supports %2 or later. Check the operating system version on the computer named %3.
//
PDH_OS_EARLIER_VERSION = DWORD($C0000BFA);
{$EXTERNALSYM PDH_OS_EARLIER_VERSION}
//
// MessageId: PDH_INCORRECT_APPEND_TIME
//
// MessageText:
//
// The output file must contain earlier data than the file to be appended.
//
PDH_INCORRECT_APPEND_TIME = DWORD($C0000BFB);
{$EXTERNALSYM PDH_INCORRECT_APPEND_TIME}
//
// MessageId: PDH_UNMATCHED_APPEND_COUNTER
//
// MessageText:
//
// Both files must have identical counters in order to append.
//
PDH_UNMATCHED_APPEND_COUNTER = DWORD($C0000BFC);
{$EXTERNALSYM PDH_UNMATCHED_APPEND_COUNTER}
//
// MessageId: PDH_SQL_ALTER_DETAIL_FAILED
//
// MessageText:
//
// Cannot alter CounterDetail table layout in SQL database.
//
PDH_SQL_ALTER_DETAIL_FAILED = DWORD($C0000BFD);
{$EXTERNALSYM PDH_SQL_ALTER_DETAIL_FAILED}
//
// MessageId: PDH_QUERY_PERF_DATA_TIMEOUT
//
// MessageText:
//
// System is busy. Timeout when collecting counter data. Please retry later or increase "CollectTime" registry value.
//
PDH_QUERY_PERF_DATA_TIMEOUT = DWORD($C0000BFE);
{$EXTERNALSYM PDH_QUERY_PERF_DATA_TIMEOUT}
{$ENDIF JWA_IMPLEMENTATIONSECTION}
{$IFNDEF JWA_OMIT_SECTIONS}
implementation
//uses ...
{$ENDIF JWA_OMIT_SECTIONS}
{$IFNDEF JWA_INTERFACESECTION}
//your implementation here
{$ENDIF JWA_INTERFACESECTION}
{$IFNDEF JWA_OMIT_SECTIONS}
end.
{$ENDIF JWA_OMIT_SECTIONS}