Why Gemfury?
Push, build, and install
RubyGems
npm packages
Python packages
Maven artifacts
PHP packages
Go Modules
Debian packages
RPM packages
NuGet packages
Repository URL to install this package:
|
Version:
3.0.0 ▾
|
{******************************************************************************}
{ }
{ Windows Cryptography API interface Unit for Object Pascal }
{ }
{ Portions created by Microsoft are Copyright (C) 1995-2001 Microsoft }
{ Corporation. All Rights Reserved. }
{ }
{ The original file is: wincrypt.h, released June 2000. The original Pascal }
{ code is: WinCrypt.pas, released December 2000. The initial developer of the }
{ Pascal code is Marcel van Brakel (brakelm att chello dott nl). }
{ }
{ Portions created by Marcel van Brakel are Copyright (C) 1999-2001 }
{ Marcel van Brakel. All Rights Reserved. }
{ }
{ Obtained through: Joint Endeavour of Delphi Innovators (Project JEDI) }
{ }
{ You may retrieve the latest version of this file at the Project JEDI }
{ APILIB home page, located at http://jedi-apilib.sourceforge.net }
{ }
{ The contents of this file are used with permission, subject to the Mozilla }
{ Public License Version 1.1 (the "License"); you may not use this file except }
{ in compliance with the License. You may obtain a copy of the License at }
{ http://www.mozilla.org/MPL/MPL-1.1.html }
{ }
{ Software distributed under the License is distributed on an "AS IS" basis, }
{ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for }
{ the specific language governing rights and limitations under the License. }
{ }
{ Alternatively, the contents of this file may be used under the terms of the }
{ GNU Lesser General Public License (the "LGPL License"), in which case the }
{ provisions of the LGPL License are applicable instead of those above. }
{ If you wish to allow use of your version of this file only under the terms }
{ of the LGPL License and not to allow others to use your version of this file }
{ under the MPL, indicate your decision by deleting the provisions above and }
{ replace them with the notice and other provisions required by the LGPL }
{ License. If you do not delete the provisions above, a recipient may use }
{ your version of this file under either the MPL or the LGPL License. }
{ }
{ For more information about the LGPL: http://www.gnu.org/copyleft/lesser.html }
{ }
{******************************************************************************}
// $Id: JwaWinCrypt.pas,v 1.17 2007/09/05 11:58:53 dezipaitor Exp $
{$IFNDEF JWA_OMIT_SECTIONS}
unit JwaWinCrypt;
{$I jediapilib.inc}
{$WEAKPACKAGEUNIT}
{$ENDIF JWA_OMIT_SECTIONS}
{$IFNDEF JWA_OMIT_SECTIONS}
interface
uses
JwaWinBase, JwaWinType;
{$ENDIF JWA_OMIT_SECTIONS}
{$IFNDEF JWA_IMPLEMENTATIONSECTION}
{$HPPEMIT ''}
{$HPPEMIT '#include <WinCrypt.h>'}
{$HPPEMIT ''}
{$HPPEMIT 'typedef HCRYPTPROV *PHCRYPTPROV'}
{$HPPEMIT 'typedef HCRYPTKEY *PHCRYPTKEY'}
{$HPPEMIT 'typedef HCRYPTHASH *PHCRYPTHASH'}
{$HPPEMIT 'typedef PROV_ENUMALGS *PPROV_ENUMALGS'}
{$HPPEMIT 'typedef PROV_ENUMALGS_EX *PPROV_ENUMALGS_EX'}
{$HPPEMIT 'typedef PUBLICKEYSTRUC *PPUBLICKEYSTRUC'}
{$HPPEMIT 'typedef RSAPUBKEY *PRSAPUBKEY'}
{$HPPEMIT 'typedef DSSSEED *PDSSSEED'}
{$HPPEMIT 'typedef PUBKEYVER3 *PPUBKEYVER3'}
{$HPPEMIT 'typedef DHPRIVKEY_VER3 *PPRIVKEYVER3'}
{$HPPEMIT 'typedef CERT_FORTEZZA_DATA_PROP *PCERT_FORTEZZA_DATA_PROP'}
{$HPPEMIT 'typedef HCRYPTMSG *PHCRYPTMSG'}
{$HPPEMIT 'typedef CMSG_RECIPIENT_ENCODE_INFO *PCMSG_RECIPIENT_ENCODE_INFO'}
{$HPPEMIT 'typedef _CMSG_RECIPIENT_ENCODE_INFO CMSG_RECIPIENT_ENCODE_INFO'}
{$HPPEMIT 'typedef PCMSG_KEY_AGREE_KEY_ENCRYPT_INFO *PPCMSG_KEY_AGREE_KEY_ENCRYPT_INFO'}
{$HPPEMIT 'typedef HCERTSTORE *PHCERTSTORE'}
{$HPPEMIT 'typedef PCCERT_CONTEXT *PPCCERT_CONTEXT'}
{$HPPEMIT 'typedef PCCRL_CONTEXT *PPCCRL_CONTEXT'}
{$HPPEMIT 'typedef PCERT_CHAIN_CONTEXT *PPCCERT_CHAIN_CONTEXT'}
{$HPPEMIT ''}
//
// Algorithm IDs and Flags
//
// ALG_ID crackers
function GET_ALG_CLASS(x: DWORD): DWORD;
{$EXTERNALSYM GET_ALG_CLASS}
function GET_ALG_TYPE(x: DWORD): DWORD;
{$EXTERNALSYM GET_ALG_TYPE}
function GET_ALG_SID(x: DWORD): DWORD;
{$EXTERNALSYM GET_ALG_SID}
// Algorithm classes
const
ALG_CLASS_ANY = 0;
{$EXTERNALSYM ALG_CLASS_ANY}
ALG_CLASS_SIGNATURE = 1 shl 13;
{$EXTERNALSYM ALG_CLASS_SIGNATURE}
ALG_CLASS_MSG_ENCRYPT = 2 shl 13;
{$EXTERNALSYM ALG_CLASS_MSG_ENCRYPT}
ALG_CLASS_DATA_ENCRYPT = 3 shl 13;
{$EXTERNALSYM ALG_CLASS_DATA_ENCRYPT}
ALG_CLASS_HASH = 4 shl 13;
{$EXTERNALSYM ALG_CLASS_HASH}
ALG_CLASS_KEY_EXCHANGE = 5 shl 13;
{$EXTERNALSYM ALG_CLASS_KEY_EXCHANGE}
ALG_CLASS_ALL = 7 shl 13;
{$EXTERNALSYM ALG_CLASS_ALL}
// Algorithm types
ALG_TYPE_ANY = 0;
{$EXTERNALSYM ALG_TYPE_ANY}
ALG_TYPE_DSS = 1 shl 9;
{$EXTERNALSYM ALG_TYPE_DSS}
ALG_TYPE_RSA = 2 shl 9;
{$EXTERNALSYM ALG_TYPE_RSA}
ALG_TYPE_BLOCK = 3 shl 9;
{$EXTERNALSYM ALG_TYPE_BLOCK}
ALG_TYPE_STREAM = 4 shl 9;
{$EXTERNALSYM ALG_TYPE_STREAM}
ALG_TYPE_DH = 5 shl 9;
{$EXTERNALSYM ALG_TYPE_DH}
ALG_TYPE_SECURECHANNEL = 6 shl 9;
{$EXTERNALSYM ALG_TYPE_SECURECHANNEL}
// Generic sub-ids
ALG_SID_ANY = 0;
{$EXTERNALSYM ALG_SID_ANY}
// Some RSA sub-ids
ALG_SID_RSA_ANY = 0;
{$EXTERNALSYM ALG_SID_RSA_ANY}
ALG_SID_RSA_PKCS = 1;
{$EXTERNALSYM ALG_SID_RSA_PKCS}
ALG_SID_RSA_MSATWORK = 2;
{$EXTERNALSYM ALG_SID_RSA_MSATWORK}
ALG_SID_RSA_ENTRUST = 3;
{$EXTERNALSYM ALG_SID_RSA_ENTRUST}
ALG_SID_RSA_PGP = 4;
{$EXTERNALSYM ALG_SID_RSA_PGP}
// Some DSS sub-ids
//
ALG_SID_DSS_ANY = 0;
{$EXTERNALSYM ALG_SID_DSS_ANY}
ALG_SID_DSS_PKCS = 1;
{$EXTERNALSYM ALG_SID_DSS_PKCS}
ALG_SID_DSS_DMS = 2;
{$EXTERNALSYM ALG_SID_DSS_DMS}
// Block cipher sub ids
// DES sub_ids
ALG_SID_DES = 1;
{$EXTERNALSYM ALG_SID_DES}
ALG_SID_3DES = 3;
{$EXTERNALSYM ALG_SID_3DES}
ALG_SID_DESX = 4;
{$EXTERNALSYM ALG_SID_DESX}
ALG_SID_IDEA = 5;
{$EXTERNALSYM ALG_SID_IDEA}
ALG_SID_CAST = 6;
{$EXTERNALSYM ALG_SID_CAST}
ALG_SID_SAFERSK64 = 7;
{$EXTERNALSYM ALG_SID_SAFERSK64}
ALG_SID_SAFERSK128 = 8;
{$EXTERNALSYM ALG_SID_SAFERSK128}
ALG_SID_3DES_112 = 9;
{$EXTERNALSYM ALG_SID_3DES_112}
ALG_SID_CYLINK_MEK = 12;
{$EXTERNALSYM ALG_SID_CYLINK_MEK}
ALG_SID_RC5 = 13;
{$EXTERNALSYM ALG_SID_RC5}
// Fortezza sub-ids
ALG_SID_SKIPJACK = 10;
{$EXTERNALSYM ALG_SID_SKIPJACK}
ALG_SID_TEK = 11;
{$EXTERNALSYM ALG_SID_TEK}
// KP_MODE
CRYPT_MODE_CBCI = 6; // ANSI CBC Interleaved
{$EXTERNALSYM CRYPT_MODE_CBCI}
CRYPT_MODE_CFBP = 7; // ANSI CFB Pipelined
{$EXTERNALSYM CRYPT_MODE_CFBP}
CRYPT_MODE_OFBP = 8; // ANSI OFB Pipelined
{$EXTERNALSYM CRYPT_MODE_OFBP}
CRYPT_MODE_CBCOFM = 9; // ANSI CBC + OF Masking
{$EXTERNALSYM CRYPT_MODE_CBCOFM}
CRYPT_MODE_CBCOFMI = 10; // ANSI CBC + OFM Interleaved
{$EXTERNALSYM CRYPT_MODE_CBCOFMI}
// RC2 sub-ids
ALG_SID_RC2 = 2;
{$EXTERNALSYM ALG_SID_RC2}
// Stream cipher sub-ids
ALG_SID_RC4 = 1;
{$EXTERNALSYM ALG_SID_RC4}
ALG_SID_SEAL = 2;
{$EXTERNALSYM ALG_SID_SEAL}
// Diffie-Hellman sub-ids
ALG_SID_DH_SANDF = 1;
{$EXTERNALSYM ALG_SID_DH_SANDF}
ALG_SID_DH_EPHEM = 2;
{$EXTERNALSYM ALG_SID_DH_EPHEM}
ALG_SID_AGREED_KEY_ANY = 3;
{$EXTERNALSYM ALG_SID_AGREED_KEY_ANY}
ALG_SID_KEA = 4;
{$EXTERNALSYM ALG_SID_KEA}
// Hash sub ids
ALG_SID_MD2 = 1;
{$EXTERNALSYM ALG_SID_MD2}
ALG_SID_MD4 = 2;
{$EXTERNALSYM ALG_SID_MD4}
ALG_SID_MD5 = 3;
{$EXTERNALSYM ALG_SID_MD5}
ALG_SID_SHA = 4;
{$EXTERNALSYM ALG_SID_SHA}
ALG_SID_SHA1 = 4;
{$EXTERNALSYM ALG_SID_SHA1}
ALG_SID_MAC = 5;
{$EXTERNALSYM ALG_SID_MAC}
ALG_SID_RIPEMD = 6;
{$EXTERNALSYM ALG_SID_RIPEMD}
ALG_SID_RIPEMD160 = 7;
{$EXTERNALSYM ALG_SID_RIPEMD160}
ALG_SID_SSL3SHAMD5 = 8;
{$EXTERNALSYM ALG_SID_SSL3SHAMD5}
ALG_SID_HMAC = 9;
{$EXTERNALSYM ALG_SID_HMAC}
ALG_SID_TLS1PRF = 10;
{$EXTERNALSYM ALG_SID_TLS1PRF}
// secure channel sub ids
ALG_SID_SSL3_MASTER = 1;
{$EXTERNALSYM ALG_SID_SSL3_MASTER}
ALG_SID_SCHANNEL_MASTER_HASH = 2;
{$EXTERNALSYM ALG_SID_SCHANNEL_MASTER_HASH}
ALG_SID_SCHANNEL_MAC_KEY = 3;
{$EXTERNALSYM ALG_SID_SCHANNEL_MAC_KEY}
ALG_SID_PCT1_MASTER = 4;
{$EXTERNALSYM ALG_SID_PCT1_MASTER}
ALG_SID_SSL2_MASTER = 5;
{$EXTERNALSYM ALG_SID_SSL2_MASTER}
ALG_SID_TLS1_MASTER = 6;
{$EXTERNALSYM ALG_SID_TLS1_MASTER}
ALG_SID_SCHANNEL_ENC_KEY = 7;
{$EXTERNALSYM ALG_SID_SCHANNEL_ENC_KEY}
// Our silly example sub-id
ALG_SID_EXAMPLE = 80;
{$EXTERNALSYM ALG_SID_EXAMPLE}
type
ALG_ID = Cardinal;
{$EXTERNALSYM ALG_ID}
// algorithm identifier definitions
const
CALG_MD2 = ALG_CLASS_HASH or ALG_TYPE_ANY or ALG_SID_MD2;
{$EXTERNALSYM CALG_MD2}
CALG_MD4 = ALG_CLASS_HASH or ALG_TYPE_ANY or ALG_SID_MD4;
{$EXTERNALSYM CALG_MD4}
CALG_MD5 = ALG_CLASS_HASH or ALG_TYPE_ANY or ALG_SID_MD5;
{$EXTERNALSYM CALG_MD5}
CALG_SHA = ALG_CLASS_HASH or ALG_TYPE_ANY or ALG_SID_SHA;
{$EXTERNALSYM CALG_SHA}
CALG_SHA1 = ALG_CLASS_HASH or ALG_TYPE_ANY or ALG_SID_SHA1;
{$EXTERNALSYM CALG_SHA1}
CALG_MAC = ALG_CLASS_HASH or ALG_TYPE_ANY or ALG_SID_MAC;
{$EXTERNALSYM CALG_MAC}
CALG_RSA_SIGN = ALG_CLASS_SIGNATURE or ALG_TYPE_RSA or ALG_SID_RSA_ANY;
{$EXTERNALSYM CALG_RSA_SIGN}
CALG_DSS_SIGN = ALG_CLASS_SIGNATURE or ALG_TYPE_DSS or ALG_SID_DSS_ANY;
{$EXTERNALSYM CALG_DSS_SIGN}
CALG_RSA_KEYX = ALG_CLASS_KEY_EXCHANGE or ALG_TYPE_RSA or ALG_SID_RSA_ANY;
{$EXTERNALSYM CALG_RSA_KEYX}
CALG_DES = ALG_CLASS_DATA_ENCRYPT or ALG_TYPE_BLOCK or ALG_SID_DES;
{$EXTERNALSYM CALG_DES}
CALG_3DES_112 = ALG_CLASS_DATA_ENCRYPT or ALG_TYPE_BLOCK or ALG_SID_3DES_112;
{$EXTERNALSYM CALG_3DES_112}
CALG_3DES = ALG_CLASS_DATA_ENCRYPT or ALG_TYPE_BLOCK or ALG_SID_3DES;
{$EXTERNALSYM CALG_3DES}
CALG_DESX = ALG_CLASS_DATA_ENCRYPT or ALG_TYPE_BLOCK or ALG_SID_DESX;
{$EXTERNALSYM CALG_DESX}
CALG_RC2 = ALG_CLASS_DATA_ENCRYPT or ALG_TYPE_BLOCK or ALG_SID_RC2;
{$EXTERNALSYM CALG_RC2}
CALG_RC4 = ALG_CLASS_DATA_ENCRYPT or ALG_TYPE_STREAM or ALG_SID_RC4;
{$EXTERNALSYM CALG_RC4}
CALG_SEAL = ALG_CLASS_DATA_ENCRYPT or ALG_TYPE_STREAM or ALG_SID_SEAL;
{$EXTERNALSYM CALG_SEAL}
CALG_DH_SF = ALG_CLASS_KEY_EXCHANGE or ALG_TYPE_DH or ALG_SID_DH_SANDF;
{$EXTERNALSYM CALG_DH_SF}
CALG_DH_EPHEM = ALG_CLASS_KEY_EXCHANGE or ALG_TYPE_DH or ALG_SID_DH_EPHEM;
{$EXTERNALSYM CALG_DH_EPHEM}
CALG_AGREEDKEY_ANY = ALG_CLASS_KEY_EXCHANGE or ALG_TYPE_DH or ALG_SID_AGREED_KEY_ANY;
{$EXTERNALSYM CALG_AGREEDKEY_ANY}
CALG_KEA_KEYX = ALG_CLASS_KEY_EXCHANGE or ALG_TYPE_DH or ALG_SID_KEA;
{$EXTERNALSYM CALG_KEA_KEYX}
CALG_HUGHES_MD5 = ALG_CLASS_KEY_EXCHANGE or ALG_TYPE_ANY or ALG_SID_MD5;
{$EXTERNALSYM CALG_HUGHES_MD5}
CALG_SKIPJACK = ALG_CLASS_DATA_ENCRYPT or ALG_TYPE_BLOCK or ALG_SID_SKIPJACK;
{$EXTERNALSYM CALG_SKIPJACK}
CALG_TEK = ALG_CLASS_DATA_ENCRYPT or ALG_TYPE_BLOCK or ALG_SID_TEK;
{$EXTERNALSYM CALG_TEK}
CALG_CYLINK_MEK = ALG_CLASS_DATA_ENCRYPT or ALG_TYPE_BLOCK or ALG_SID_CYLINK_MEK;
{$EXTERNALSYM CALG_CYLINK_MEK}
CALG_SSL3_SHAMD5 = ALG_CLASS_HASH or ALG_TYPE_ANY or ALG_SID_SSL3SHAMD5;
{$EXTERNALSYM CALG_SSL3_SHAMD5}
CALG_SSL3_MASTER = ALG_CLASS_MSG_ENCRYPT or ALG_TYPE_SECURECHANNEL or ALG_SID_SSL3_MASTER;
{$EXTERNALSYM CALG_SSL3_MASTER}
CALG_SCHANNEL_MASTER_HASH = ALG_CLASS_MSG_ENCRYPT or ALG_TYPE_SECURECHANNEL or ALG_SID_SCHANNEL_MASTER_HASH;
{$EXTERNALSYM CALG_SCHANNEL_MASTER_HASH}
CALG_SCHANNEL_MAC_KEY = ALG_CLASS_MSG_ENCRYPT or ALG_TYPE_SECURECHANNEL or ALG_SID_SCHANNEL_MAC_KEY;
{$EXTERNALSYM CALG_SCHANNEL_MAC_KEY}
CALG_SCHANNEL_ENC_KEY = ALG_CLASS_MSG_ENCRYPT or ALG_TYPE_SECURECHANNEL or ALG_SID_SCHANNEL_ENC_KEY;
{$EXTERNALSYM CALG_SCHANNEL_ENC_KEY}
CALG_PCT1_MASTER = ALG_CLASS_MSG_ENCRYPT or ALG_TYPE_SECURECHANNEL or ALG_SID_PCT1_MASTER;
{$EXTERNALSYM CALG_PCT1_MASTER}
CALG_SSL2_MASTER = ALG_CLASS_MSG_ENCRYPT or ALG_TYPE_SECURECHANNEL or ALG_SID_SSL2_MASTER;
{$EXTERNALSYM CALG_SSL2_MASTER}
CALG_TLS1_MASTER = ALG_CLASS_MSG_ENCRYPT or ALG_TYPE_SECURECHANNEL or ALG_SID_TLS1_MASTER;
{$EXTERNALSYM CALG_TLS1_MASTER}
CALG_RC5 = ALG_CLASS_DATA_ENCRYPT or ALG_TYPE_BLOCK or ALG_SID_RC5;
{$EXTERNALSYM CALG_RC5}
CALG_HMAC = ALG_CLASS_HASH or ALG_TYPE_ANY or ALG_SID_HMAC;
{$EXTERNALSYM CALG_HMAC}
CALG_TLS1PRF = ALG_CLASS_HASH or ALG_TYPE_ANY or ALG_SID_TLS1PRF;
{$EXTERNALSYM CALG_TLS1PRF}
// resource number for signatures in the CSP
SIGNATURE_RESOURCE_NUMBER = $29A;
{$EXTERNALSYM SIGNATURE_RESOURCE_NUMBER}
type
PVTableProvStruc = ^VTableProvStruc;
_VTableProvStruc = record
Version: DWORD;
FuncVerifyImage: FARPROC;
FuncReturnhWnd: FARPROC;
dwProvType: DWORD;
pbContextInfo: LPBYTE;
cbContextInfo: DWORD;
pszProvName: LPSTR;
end;
{$EXTERNALSYM _VTableProvStruc}
VTableProvStruc = _VTableProvStruc;
{$EXTERNALSYM VTableProvStruc}
TVTableProvStruc = VTableProvStruc;
HCRYPTPROV = ULONG_PTR;
{$EXTERNALSYM HCRYPTPROV}
HCRYPTKEY = ULONG_PTR;
{$EXTERNALSYM HCRYPTKEY}
HCRYPTHASH = ULONG_PTR;
{$EXTERNALSYM HCRYPTHASH}
PHCRYPTPROV = ^HCRYPTPROV;
{$NODEFINE PHCRYPTPROV}
PHCRYPTKEY = ^HCRYPTKEY;
{$NODEFINE PHCRYPTKEY}
PHCRYPTHASH = ^HCRYPTHASH;
{$NODEFINE PHCRYPTHASH}
// dwFlags definitions for CryptAcquireContext
const
CRYPT_VERIFYCONTEXT = DWORD($F0000000);
{$EXTERNALSYM CRYPT_VERIFYCONTEXT}
CRYPT_NEWKEYSET = $00000008;
{$EXTERNALSYM CRYPT_NEWKEYSET}
CRYPT_DELETEKEYSET = $00000010;
{$EXTERNALSYM CRYPT_DELETEKEYSET}
CRYPT_MACHINE_KEYSET = $00000020;
{$EXTERNALSYM CRYPT_MACHINE_KEYSET}
CRYPT_SILENT = $00000040;
{$EXTERNALSYM CRYPT_SILENT}
// dwFlag definitions for CryptGenKey
CRYPT_EXPORTABLE = $00000001;
{$EXTERNALSYM CRYPT_EXPORTABLE}
CRYPT_USER_PROTECTED = $00000002;
{$EXTERNALSYM CRYPT_USER_PROTECTED}
CRYPT_CREATE_SALT = $00000004;
{$EXTERNALSYM CRYPT_CREATE_SALT}
CRYPT_UPDATE_KEY = $00000008;
{$EXTERNALSYM CRYPT_UPDATE_KEY}
CRYPT_NO_SALT = $00000010;
{$EXTERNALSYM CRYPT_NO_SALT}
CRYPT_PREGEN = $00000040;
{$EXTERNALSYM CRYPT_PREGEN}
CRYPT_RECIPIENT = $00000010;
{$EXTERNALSYM CRYPT_RECIPIENT}
CRYPT_INITIATOR = $00000040;
{$EXTERNALSYM CRYPT_INITIATOR}
CRYPT_ONLINE = $00000080;
{$EXTERNALSYM CRYPT_ONLINE}
CRYPT_SF = $00000100;
{$EXTERNALSYM CRYPT_SF}
CRYPT_CREATE_IV = $00000200;
{$EXTERNALSYM CRYPT_CREATE_IV}
CRYPT_KEK = $00000400;
{$EXTERNALSYM CRYPT_KEK}
CRYPT_DATA_KEY = $00000800;
{$EXTERNALSYM CRYPT_DATA_KEY}
CRYPT_VOLATILE = $00001000;
{$EXTERNALSYM CRYPT_VOLATILE}
CRYPT_SGCKEY = $00002000;
{$EXTERNALSYM CRYPT_SGCKEY}
RSA1024BIT_KEY = $04000000;
{$EXTERNALSYM RSA1024BIT_KEY}
// dwFlags definitions for CryptDeriveKey
CRYPT_SERVER = $00000400;
{$EXTERNALSYM CRYPT_SERVER}
KEY_LENGTH_MASK = DWORD($FFFF0000);
{$EXTERNALSYM KEY_LENGTH_MASK}
// dwFlag definitions for CryptExportKey
CRYPT_Y_ONLY = $00000001;
{$EXTERNALSYM CRYPT_Y_ONLY}
CRYPT_SSL2_FALLBACK = $00000002;
{$EXTERNALSYM CRYPT_SSL2_FALLBACK}
CRYPT_DESTROYKEY = $00000004;
{$EXTERNALSYM CRYPT_DESTROYKEY}
CRYPT_OAEP = $00000040; // used with RSA encryptions/decryptions
// CryptExportKey, CryptImportKey,
// CryptEncrypt and CryptDecrypt
{$EXTERNALSYM CRYPT_OAEP}
CRYPT_BLOB_VER3 = $00000080; // export version 3 of a blob type
{$EXTERNALSYM CRYPT_BLOB_VER3}
// dwFlags definitions for CryptCreateHash
CRYPT_SECRETDIGEST = $00000001;
{$EXTERNALSYM CRYPT_SECRETDIGEST}
// dwFlags definitions for CryptHashSessionKey
CRYPT_LITTLE_ENDIAN = $00000001;
{$EXTERNALSYM CRYPT_LITTLE_ENDIAN}
// dwFlags definitions for CryptSignHash and CryptVerifySignature
CRYPT_NOHASHOID = $00000001;
{$EXTERNALSYM CRYPT_NOHASHOID}
CRYPT_TYPE2_FORMAT = $00000002;
{$EXTERNALSYM CRYPT_TYPE2_FORMAT}
CRYPT_X931_FORMAT = $00000004;
{$EXTERNALSYM CRYPT_X931_FORMAT}
// dwFlag definitions for CryptSetProviderEx and CryptGetDefaultProvider
CRYPT_MACHINE_DEFAULT = $00000001;
{$EXTERNALSYM CRYPT_MACHINE_DEFAULT}
CRYPT_USER_DEFAULT = $00000002;
{$EXTERNALSYM CRYPT_USER_DEFAULT}
CRYPT_DELETE_DEFAULT = $00000004;
{$EXTERNALSYM CRYPT_DELETE_DEFAULT}
// exported key blob definitions
SIMPLEBLOB = $1;
{$EXTERNALSYM SIMPLEBLOB}
PUBLICKEYBLOB = $6;
{$EXTERNALSYM PUBLICKEYBLOB}
PRIVATEKEYBLOB = $7;
{$EXTERNALSYM PRIVATEKEYBLOB}
PLAINTEXTKEYBLOB = $8;
{$EXTERNALSYM PLAINTEXTKEYBLOB}
OPAQUEKEYBLOB = $9;
{$EXTERNALSYM OPAQUEKEYBLOB}
PUBLICKEYBLOBEX = $A;
{$EXTERNALSYM PUBLICKEYBLOBEX}
SYMMETRICWRAPKEYBLOB = $B;
{$EXTERNALSYM SYMMETRICWRAPKEYBLOB}
AT_KEYEXCHANGE = 1;
{$EXTERNALSYM AT_KEYEXCHANGE}
AT_SIGNATURE = 2;
{$EXTERNALSYM AT_SIGNATURE}
CRYPT_USERDATA = 1;
{$EXTERNALSYM CRYPT_USERDATA}
// dwParam
KP_IV = 1; // Initialization vector
{$EXTERNALSYM KP_IV}
KP_SALT = 2; // Salt value
{$EXTERNALSYM KP_SALT}
KP_PADDING = 3; // Padding values
{$EXTERNALSYM KP_PADDING}
KP_MODE = 4; // Mode of the cipher
{$EXTERNALSYM KP_MODE}
KP_MODE_BITS = 5; // Number of bits to feedback
{$EXTERNALSYM KP_MODE_BITS}
KP_PERMISSIONS = 6; // Key permissions DWORD
{$EXTERNALSYM KP_PERMISSIONS}
KP_ALGID = 7; // Key algorithm
{$EXTERNALSYM KP_ALGID}
KP_BLOCKLEN = 8; // Block size of the cipher
{$EXTERNALSYM KP_BLOCKLEN}
KP_KEYLEN = 9; // Length of key in bits
{$EXTERNALSYM KP_KEYLEN}
KP_SALT_EX = 10; // Length of salt in bytes
{$EXTERNALSYM KP_SALT_EX}
KP_P = 11; // DSS/Diffie-Hellman P value
{$EXTERNALSYM KP_P}
KP_G = 12; // DSS/Diffie-Hellman G value
{$EXTERNALSYM KP_G}
KP_Q = 13; // DSS Q value
{$EXTERNALSYM KP_Q}
KP_X = 14; // Diffie-Hellman X value
{$EXTERNALSYM KP_X}
KP_Y = 15; // Y value
{$EXTERNALSYM KP_Y}
KP_RA = 16; // Fortezza RA value
{$EXTERNALSYM KP_RA}
KP_RB = 17; // Fortezza RB value
{$EXTERNALSYM KP_RB}
KP_INFO = 18; // for putting information into an RSA envelope
{$EXTERNALSYM KP_INFO}
KP_EFFECTIVE_KEYLEN = 19; // setting and getting RC2 effective key length
{$EXTERNALSYM KP_EFFECTIVE_KEYLEN}
KP_SCHANNEL_ALG = 20; // for setting the Secure Channel algorithms
{$EXTERNALSYM KP_SCHANNEL_ALG}
KP_CLIENT_RANDOM = 21; // for setting the Secure Channel client random data
{$EXTERNALSYM KP_CLIENT_RANDOM}
KP_SERVER_RANDOM = 22; // for setting the Secure Channel server random data
{$EXTERNALSYM KP_SERVER_RANDOM}
KP_RP = 23;
{$EXTERNALSYM KP_RP}
KP_PRECOMP_MD5 = 24;
{$EXTERNALSYM KP_PRECOMP_MD5}
KP_PRECOMP_SHA = 25;
{$EXTERNALSYM KP_PRECOMP_SHA}
KP_CERTIFICATE = 26; // for setting Secure Channel certificate data (PCT1)
{$EXTERNALSYM KP_CERTIFICATE}
KP_CLEAR_KEY = 27; // for setting Secure Channel clear key data (PCT1)
{$EXTERNALSYM KP_CLEAR_KEY}
KP_PUB_EX_LEN = 28;
{$EXTERNALSYM KP_PUB_EX_LEN}
KP_PUB_EX_VAL = 29;
{$EXTERNALSYM KP_PUB_EX_VAL}
KP_KEYVAL = 30;
{$EXTERNALSYM KP_KEYVAL}
KP_ADMIN_PIN = 31;
{$EXTERNALSYM KP_ADMIN_PIN}
KP_KEYEXCHANGE_PIN = 32;
{$EXTERNALSYM KP_KEYEXCHANGE_PIN}
KP_SIGNATURE_PIN = 33;
{$EXTERNALSYM KP_SIGNATURE_PIN}
KP_PREHASH = 34;
{$EXTERNALSYM KP_PREHASH}
KP_OAEP_PARAMS = 36; // for setting OAEP params on RSA keys
{$EXTERNALSYM KP_OAEP_PARAMS}
KP_CMS_KEY_INFO = 37;
{$EXTERNALSYM KP_CMS_KEY_INFO}
KP_CMS_DH_KEY_INFO = 38;
{$EXTERNALSYM KP_CMS_DH_KEY_INFO}
KP_PUB_PARAMS = 39; // for setting public parameters
{$EXTERNALSYM KP_PUB_PARAMS}
KP_VERIFY_PARAMS = 40; // for verifying DSA and DH parameters
{$EXTERNALSYM KP_VERIFY_PARAMS}
KP_HIGHEST_VERSION = 41; // for TLS protocol version setting
{$EXTERNALSYM KP_HIGHEST_VERSION}
// KP_PADDING
PKCS5_PADDING = 1; // PKCS 5 (sec 6.2) padding method
{$EXTERNALSYM PKCS5_PADDING}
RANDOM_PADDING = 2;
{$EXTERNALSYM RANDOM_PADDING}
ZERO_PADDING = 3;
{$EXTERNALSYM ZERO_PADDING}
// KP_MODE
CRYPT_MODE_CBC = 1; // Cipher block chaining
{$EXTERNALSYM CRYPT_MODE_CBC}
CRYPT_MODE_ECB = 2; // Electronic code book
{$EXTERNALSYM CRYPT_MODE_ECB}
CRYPT_MODE_OFB = 3; // Output feedback mode
{$EXTERNALSYM CRYPT_MODE_OFB}
CRYPT_MODE_CFB = 4; // Cipher feedback mode
{$EXTERNALSYM CRYPT_MODE_CFB}
CRYPT_MODE_CTS = 5; // Ciphertext stealing mode
{$EXTERNALSYM CRYPT_MODE_CTS}
// KP_PERMISSIONS
CRYPT_ENCRYPT = $0001; // Allow encryption
{$EXTERNALSYM CRYPT_ENCRYPT}
CRYPT_DECRYPT = $0002; // Allow decryption
{$EXTERNALSYM CRYPT_DECRYPT}
CRYPT_EXPORT = $0004; // Allow key to be exported
{$EXTERNALSYM CRYPT_EXPORT}
CRYPT_READ = $0008; // Allow parameters to be read
{$EXTERNALSYM CRYPT_READ}
CRYPT_WRITE = $0010; // Allow parameters to be set
{$EXTERNALSYM CRYPT_WRITE}
CRYPT_MAC = $0020; // Allow MACs to be used with key
{$EXTERNALSYM CRYPT_MAC}
CRYPT_EXPORT_KEY = $0040; // Allow key to be used for exporting keys
{$EXTERNALSYM CRYPT_EXPORT_KEY}
CRYPT_IMPORT_KEY = $0080; // Allow key to be used for importing keys
{$EXTERNALSYM CRYPT_IMPORT_KEY}
HP_ALGID = $0001; // Hash algorithm
{$EXTERNALSYM HP_ALGID}
HP_HASHVAL = $0002; // Hash value
{$EXTERNALSYM HP_HASHVAL}
HP_HASHSIZE = $0004; // Hash value size
{$EXTERNALSYM HP_HASHSIZE}
HP_HMAC_INFO = $0005; // information for creating an HMAC
{$EXTERNALSYM HP_HMAC_INFO}
HP_TLS1PRF_LABEL = $0006; // label for TLS1 PRF
{$EXTERNALSYM HP_TLS1PRF_LABEL}
HP_TLS1PRF_SEED = $0007; // seed for TLS1 PRF
{$EXTERNALSYM HP_TLS1PRF_SEED}
CRYPT_FAILED = FALSE;
{$EXTERNALSYM CRYPT_FAILED}
CRYPT_SUCCEED = TRUE;
{$EXTERNALSYM CRYPT_SUCCEED}
function RCRYPT_SUCCEEDED(rt: BOOL): BOOL;
{$EXTERNALSYM RCRYPT_SUCCEEDED}
function RCRYPT_FAILED(rt: BOOL): BOOL;
{$EXTERNALSYM RCRYPT_FAILED}
//
// CryptGetProvParam
//
const
PP_ENUMALGS = 1;
{$EXTERNALSYM PP_ENUMALGS}
PP_ENUMCONTAINERS = 2;
{$EXTERNALSYM PP_ENUMCONTAINERS}
PP_IMPTYPE = 3;
{$EXTERNALSYM PP_IMPTYPE}
PP_NAME = 4;
{$EXTERNALSYM PP_NAME}
PP_VERSION = 5;
{$EXTERNALSYM PP_VERSION}
PP_CONTAINER = 6;
{$EXTERNALSYM PP_CONTAINER}
PP_CHANGE_PASSWORD = 7;
{$EXTERNALSYM PP_CHANGE_PASSWORD}
PP_KEYSET_SEC_DESCR = 8; // get/set security descriptor of keyset
{$EXTERNALSYM PP_KEYSET_SEC_DESCR}
PP_CERTCHAIN = 9; // for retrieving certificates from tokens
{$EXTERNALSYM PP_CERTCHAIN}
PP_KEY_TYPE_SUBTYPE = 10;
{$EXTERNALSYM PP_KEY_TYPE_SUBTYPE}
PP_PROVTYPE = 16;
{$EXTERNALSYM PP_PROVTYPE}
PP_KEYSTORAGE = 17;
{$EXTERNALSYM PP_KEYSTORAGE}
PP_APPLI_CERT = 18;
{$EXTERNALSYM PP_APPLI_CERT}
PP_SYM_KEYSIZE = 19;
{$EXTERNALSYM PP_SYM_KEYSIZE}
PP_SESSION_KEYSIZE = 20;
{$EXTERNALSYM PP_SESSION_KEYSIZE}
PP_UI_PROMPT = 21;
{$EXTERNALSYM PP_UI_PROMPT}
PP_ENUMALGS_EX = 22;
{$EXTERNALSYM PP_ENUMALGS_EX}
PP_ENUMMANDROOTS = 25;
{$EXTERNALSYM PP_ENUMMANDROOTS}
PP_ENUMELECTROOTS = 26;
{$EXTERNALSYM PP_ENUMELECTROOTS}
PP_KEYSET_TYPE = 27;
{$EXTERNALSYM PP_KEYSET_TYPE}
PP_ADMIN_PIN = 31;
{$EXTERNALSYM PP_ADMIN_PIN}
PP_KEYEXCHANGE_PIN = 32;
{$EXTERNALSYM PP_KEYEXCHANGE_PIN}
PP_SIGNATURE_PIN = 33;
{$EXTERNALSYM PP_SIGNATURE_PIN}
PP_SIG_KEYSIZE_INC = 34;
{$EXTERNALSYM PP_SIG_KEYSIZE_INC}
PP_KEYX_KEYSIZE_INC = 35;
{$EXTERNALSYM PP_KEYX_KEYSIZE_INC}
PP_UNIQUE_CONTAINER = 36;
{$EXTERNALSYM PP_UNIQUE_CONTAINER}
PP_SGC_INFO = 37;
{$EXTERNALSYM PP_SGC_INFO}
PP_USE_HARDWARE_RNG = 38;
{$EXTERNALSYM PP_USE_HARDWARE_RNG}
PP_KEYSPEC = 39;
{$EXTERNALSYM PP_KEYSPEC}
PP_ENUMEX_SIGNING_PROT = 40;
{$EXTERNALSYM PP_ENUMEX_SIGNING_PROT}
CRYPT_FIRST = 1;
{$EXTERNALSYM CRYPT_FIRST}
CRYPT_NEXT = 2;
{$EXTERNALSYM CRYPT_NEXT}
CRYPT_SGC_ENUM = 4;
{$EXTERNALSYM CRYPT_SGC_ENUM}
CRYPT_IMPL_HARDWARE = 1;
{$EXTERNALSYM CRYPT_IMPL_HARDWARE}
CRYPT_IMPL_SOFTWARE = 2;
{$EXTERNALSYM CRYPT_IMPL_SOFTWARE}
CRYPT_IMPL_MIXED = 3;
{$EXTERNALSYM CRYPT_IMPL_MIXED}
CRYPT_IMPL_UNKNOWN = 4;
{$EXTERNALSYM CRYPT_IMPL_UNKNOWN}
CRYPT_IMPL_REMOVABLE = 8;
{$EXTERNALSYM CRYPT_IMPL_REMOVABLE}
// key storage flags
CRYPT_SEC_DESCR = $00000001;
{$EXTERNALSYM CRYPT_SEC_DESCR}
CRYPT_PSTORE = $00000002;
{$EXTERNALSYM CRYPT_PSTORE}
CRYPT_UI_PROMPT = $00000004;
{$EXTERNALSYM CRYPT_UI_PROMPT}
// protocol flags
CRYPT_FLAG_PCT1 = $0001;
{$EXTERNALSYM CRYPT_FLAG_PCT1}
CRYPT_FLAG_SSL2 = $0002;
{$EXTERNALSYM CRYPT_FLAG_SSL2}
CRYPT_FLAG_SSL3 = $0004;
{$EXTERNALSYM CRYPT_FLAG_SSL3}
CRYPT_FLAG_TLS1 = $0008;
{$EXTERNALSYM CRYPT_FLAG_TLS1}
CRYPT_FLAG_IPSEC = $0010;
{$EXTERNALSYM CRYPT_FLAG_IPSEC}
CRYPT_FLAG_SIGNING = $0020;
{$EXTERNALSYM CRYPT_FLAG_SIGNING}
// SGC flags
CRYPT_SGC = $0001;
{$EXTERNALSYM CRYPT_SGC}
CRYPT_FASTSGC = $0002;
{$EXTERNALSYM CRYPT_FASTSGC}
//
// CryptSetProvParam
//
PP_CLIENT_HWND = 1;
{$EXTERNALSYM PP_CLIENT_HWND}
PP_CONTEXT_INFO = 11;
{$EXTERNALSYM PP_CONTEXT_INFO}
PP_KEYEXCHANGE_KEYSIZE = 12;
{$EXTERNALSYM PP_KEYEXCHANGE_KEYSIZE}
PP_SIGNATURE_KEYSIZE = 13;
{$EXTERNALSYM PP_SIGNATURE_KEYSIZE}
PP_KEYEXCHANGE_ALG = 14;
{$EXTERNALSYM PP_KEYEXCHANGE_ALG}
PP_SIGNATURE_ALG = 15;
{$EXTERNALSYM PP_SIGNATURE_ALG}
PP_DELETEKEY = 24;
{$EXTERNALSYM PP_DELETEKEY}
PROV_RSA_FULL = 1;
{$EXTERNALSYM PROV_RSA_FULL}
PROV_RSA_SIG = 2;
{$EXTERNALSYM PROV_RSA_SIG}
PROV_DSS = 3;
{$EXTERNALSYM PROV_DSS}
PROV_FORTEZZA = 4;
{$EXTERNALSYM PROV_FORTEZZA}
PROV_MS_EXCHANGE = 5;
{$EXTERNALSYM PROV_MS_EXCHANGE}
PROV_SSL = 6;
{$EXTERNALSYM PROV_SSL}
PROV_RSA_SCHANNEL = 12;
{$EXTERNALSYM PROV_RSA_SCHANNEL}
PROV_DSS_DH = 13;
{$EXTERNALSYM PROV_DSS_DH}
PROV_EC_ECDSA_SIG = 14;
{$EXTERNALSYM PROV_EC_ECDSA_SIG}
PROV_EC_ECNRA_SIG = 15;
{$EXTERNALSYM PROV_EC_ECNRA_SIG}
PROV_EC_ECDSA_FULL = 16;
{$EXTERNALSYM PROV_EC_ECDSA_FULL}
PROV_EC_ECNRA_FULL = 17;
{$EXTERNALSYM PROV_EC_ECNRA_FULL}
PROV_DH_SCHANNEL = 18;
{$EXTERNALSYM PROV_DH_SCHANNEL}
PROV_SPYRUS_LYNKS = 20;
{$EXTERNALSYM PROV_SPYRUS_LYNKS}
PROV_RNG = 21;
{$EXTERNALSYM PROV_RNG}
PROV_INTEL_SEC = 22;
{$EXTERNALSYM PROV_INTEL_SEC}
//
// STT defined Providers
//
PROV_STT_MER = 7;
{$EXTERNALSYM PROV_STT_MER}
PROV_STT_ACQ = 8;
{$EXTERNALSYM PROV_STT_ACQ}
PROV_STT_BRND = 9;
{$EXTERNALSYM PROV_STT_BRND}
PROV_STT_ROOT = 10;
{$EXTERNALSYM PROV_STT_ROOT}
PROV_STT_ISS = 11;
{$EXTERNALSYM PROV_STT_ISS}
//
// Provider friendly names
//
MS_DEF_PROV_A = 'Microsoft Base Cryptographic Provider v1.0';
{$EXTERNALSYM MS_DEF_PROV_A}
MS_DEF_PROV_W = 'Microsoft Base Cryptographic Provider v1.0';
{$EXTERNALSYM MS_DEF_PROV_W}
{$IFDEF UNICODE}
MS_DEF_PROV = MS_DEF_PROV_W;
{$EXTERNALSYM MS_DEF_PROV}
{$ELSE}
MS_DEF_PROV = MS_DEF_PROV_A;
{$EXTERNALSYM MS_DEF_PROV}
{$ENDIF UNICODE}
MS_ENHANCED_PROV_A = 'Microsoft Enhanced Cryptographic Provider v1.0';
{$EXTERNALSYM MS_ENHANCED_PROV_A}
MS_ENHANCED_PROV_W = 'Microsoft Enhanced Cryptographic Provider v1.0';
{$EXTERNALSYM MS_ENHANCED_PROV_W}
{$IFDEF UNICODE}
MS_ENHANCED_PROV = MS_ENHANCED_PROV_W;
{$EXTERNALSYM MS_ENHANCED_PROV}
{$ELSE}
MS_ENHANCED_PROV = MS_ENHANCED_PROV_A;
{$EXTERNALSYM MS_ENHANCED_PROV}
{$ENDIF UNICODE}
MS_STRONG_PROV_A = 'Microsoft Strong Cryptographic Provider';
{$EXTERNALSYM MS_STRONG_PROV_A}
MS_STRONG_PROV_W = 'Microsoft Strong Cryptographic Provider';
{$EXTERNALSYM MS_STRONG_PROV_W}
{$IFDEF UNICODE}
MS_STRONG_PROV = MS_STRONG_PROV_W;
{$EXTERNALSYM MS_STRONG_PROV}
{$ELSE}
MS_STRONG_PROV = MS_STRONG_PROV_A;
{$EXTERNALSYM MS_STRONG_PROV}
{$ENDIF UNICODE}
MS_DEF_RSA_SIG_PROV_A = 'Microsoft RSA Signature Cryptographic Provider';
{$EXTERNALSYM MS_DEF_RSA_SIG_PROV_A}
MS_DEF_RSA_SIG_PROV_W = 'Microsoft RSA Signature Cryptographic Provider';
{$EXTERNALSYM MS_DEF_RSA_SIG_PROV_W}
{$IFDEF UNICODE}
MS_DEF_RSA_SIG_PROV = MS_DEF_RSA_SIG_PROV_W;
{$EXTERNALSYM MS_DEF_RSA_SIG_PROV}
{$ELSE}
MS_DEF_RSA_SIG_PROV = MS_DEF_RSA_SIG_PROV_A;
{$EXTERNALSYM MS_DEF_RSA_SIG_PROV}
{$ENDIF UNICODE}
MS_DEF_RSA_SCHANNEL_PROV_A = 'Microsoft RSA SChannel Cryptographic Provider';
{$EXTERNALSYM MS_DEF_RSA_SCHANNEL_PROV_A}
MS_DEF_RSA_SCHANNEL_PROV_W = 'Microsoft RSA SChannel Cryptographic Provider';
{$EXTERNALSYM MS_DEF_RSA_SCHANNEL_PROV_W}
{$IFDEF UNICODE}
MS_DEF_RSA_SCHANNEL_PROV = MS_DEF_RSA_SCHANNEL_PROV_W;
{$EXTERNALSYM MS_DEF_RSA_SCHANNEL_PROV}
{$ELSE}
MS_DEF_RSA_SCHANNEL_PROV = MS_DEF_RSA_SCHANNEL_PROV_A;
{$EXTERNALSYM MS_DEF_RSA_SCHANNEL_PROV}
{$ENDIF UNICODE}
MS_DEF_DSS_PROV_A = 'Microsoft Base DSS Cryptographic Provider';
{$EXTERNALSYM MS_DEF_DSS_PROV_A}
MS_DEF_DSS_PROV_W = 'Microsoft Base DSS Cryptographic Provider';
{$EXTERNALSYM MS_DEF_DSS_PROV_W}
{$IFDEF UNICODE}
MS_DEF_DSS_PROV = MS_DEF_DSS_PROV_W;
{$EXTERNALSYM MS_DEF_DSS_PROV}
{$ELSE}
MS_DEF_DSS_PROV = MS_DEF_DSS_PROV_A;
{$EXTERNALSYM MS_DEF_DSS_PROV}
{$ENDIF UNICODE}
MS_DEF_DSS_DH_PROV_A = 'Microsoft Base DSS and Diffie-Hellman Cryptographic Provider';
{$EXTERNALSYM MS_DEF_DSS_DH_PROV_A}
MS_DEF_DSS_DH_PROV_W = 'Microsoft Base DSS and Diffie-Hellman Cryptographic Provider';
{$EXTERNALSYM MS_DEF_DSS_DH_PROV_W}
{$IFDEF UNICODE}
MS_DEF_DSS_DH_PROV = MS_DEF_DSS_DH_PROV_W;
{$EXTERNALSYM MS_DEF_DSS_DH_PROV}
{$ELSE}
MS_DEF_DSS_DH_PROV = MS_DEF_DSS_DH_PROV_A;
{$EXTERNALSYM MS_DEF_DSS_DH_PROV}
{$ENDIF UNICODE}
MS_ENH_DSS_DH_PROV_A = 'Microsoft Enhanced DSS and Diffie-Hellman Cryptographic Provider';
{$EXTERNALSYM MS_ENH_DSS_DH_PROV_A}
MS_ENH_DSS_DH_PROV_W = 'Microsoft Enhanced DSS and Diffie-Hellman Cryptographic Provider';
{$EXTERNALSYM MS_ENH_DSS_DH_PROV_W}
{$IFDEF UNICODE}
MS_ENH_DSS_DH_PROV = MS_ENH_DSS_DH_PROV_W;
{$EXTERNALSYM MS_ENH_DSS_DH_PROV}
{$ELSE}
MS_ENH_DSS_DH_PROV = MS_ENH_DSS_DH_PROV_A;
{$EXTERNALSYM MS_ENH_DSS_DH_PROV}
{$ENDIF UNICODE}
MS_DEF_DH_SCHANNEL_PROV_A = 'Microsoft DH SChannel Cryptographic Provider';
{$EXTERNALSYM MS_DEF_DH_SCHANNEL_PROV_A}
MS_DEF_DH_SCHANNEL_PROV_W = 'Microsoft DH SChannel Cryptographic Provider';
{$EXTERNALSYM MS_DEF_DH_SCHANNEL_PROV_W}
{$IFDEF UNICODE}
MS_DEF_DH_SCHANNEL_PROV = MS_DEF_DH_SCHANNEL_PROV_W;
{$EXTERNALSYM MS_DEF_DH_SCHANNEL_PROV}
{$ELSE}
MS_DEF_DH_SCHANNEL_PROV = MS_DEF_DH_SCHANNEL_PROV_A;
{$EXTERNALSYM MS_DEF_DH_SCHANNEL_PROV}
{$ENDIF UNICODE}
MS_SCARD_PROV_A = 'Microsoft Base Smart Card Crypto Provider';
{$EXTERNALSYM MS_SCARD_PROV_A}
MS_SCARD_PROV_W = 'Microsoft Base Smart Card Crypto Provider';
{$EXTERNALSYM MS_SCARD_PROV_W}
{$IFDEF UNICODE}
MS_SCARD_PROV = MS_SCARD_PROV_W;
{$EXTERNALSYM MS_SCARD_PROV}
{$ELSE}
MS_SCARD_PROV = MS_SCARD_PROV_A;
{$EXTERNALSYM MS_SCARD_PROV}
{$ENDIF UNICODE}
MAXUIDLEN = 64;
{$EXTERNALSYM MAXUIDLEN}
// Exponentiation Offload Reg Location
EXPO_OFFLOAD_REG_VALUE = 'ExpoOffload';
{$EXTERNALSYM EXPO_OFFLOAD_REG_VALUE}
EXPO_OFFLOAD_FUNC_NAME = 'OffloadModExpo';
{$EXTERNALSYM EXPO_OFFLOAD_FUNC_NAME}
CUR_BLOB_VERSION = 2;
{$EXTERNALSYM CUR_BLOB_VERSION}
// structure for use with CryptSetKeyParam for CMS keys
// DO NOT USE THIS STRUCTURE!!!!!
type
PCMS_KEY_INFO = ^CMS_KEY_INFO;
{$EXTERNALSYM PCMS_KEY_INFO}
_CMS_KEY_INFO = record
dwVersion: DWORD; // sizeof(CMS_KEY_INFO)
Algid: ALG_ID; // algorithmm id for the key to be converted
pbOID: LPBYTE; // pointer to OID to hash in with Z
cbOID: DWORD; // length of OID to hash in with Z
end;
{$EXTERNALSYM _CMS_KEY_INFO}
CMS_KEY_INFO = _CMS_KEY_INFO;
{$EXTERNALSYM CMS_KEY_INFO}
TCmsKeyInfo = CMS_KEY_INFO;
PCmsKeyInfo = PCMS_KEY_INFO;
// structure for use with CryptSetHashParam with CALG_HMAC
PHMAC_Info = ^HMAC_Info;
{$EXTERNALSYM PHMAC_Info}
_HMAC_Info = record
HashAlgid: ALG_ID;
pbInnerString: LPBYTE;
cbInnerString: DWORD;
pbOuterString: LPBYTE;
cbOuterString: DWORD;
end;
{$EXTERNALSYM _HMAC_Info}
HMAC_Info = _HMAC_Info;
{$EXTERNALSYM HMAC_Info}
THMacInfo = HMAC_Info;
PHMacInfo = PHMAC_Info;
// structure for use with CryptSetKeyParam with KP_SCHANNEL_ALG
PSCHANNEL_ALG = ^SCHANNEL_ALG;
{$EXTERNALSYM PSCHANNEL_ALG}
_SCHANNEL_ALG = record
dwUse: DWORD;
Algid: ALG_ID;
cBits: DWORD;
dwFlags: DWORD;
dwReserved: DWORD;
end;
{$EXTERNALSYM _SCHANNEL_ALG}
SCHANNEL_ALG = _SCHANNEL_ALG;
{$EXTERNALSYM SCHANNEL_ALG}
TSChannelAlg = SCHANNEL_ALG;
PSChannelAlg = PSCHANNEL_ALG;
// uses of algortihms for SCHANNEL_ALG structure
const
SCHANNEL_MAC_KEY = $00000000;
{$EXTERNALSYM SCHANNEL_MAC_KEY}
SCHANNEL_ENC_KEY = $00000001;
{$EXTERNALSYM SCHANNEL_ENC_KEY}
// uses of dwFlags SCHANNEL_ALG structure
INTERNATIONAL_USAGE = $00000001;
{$EXTERNALSYM INTERNATIONAL_USAGE}
type
PPROV_ENUMALGS = ^PROV_ENUMALGS;
{$NODEFINE PPROV_ENUMALGS}
_PROV_ENUMALGS = record
aiAlgid: ALG_ID;
dwBitLen: DWORD;
dwNameLen: DWORD;
szName: array [0..19] of CHAR;
end;
{$EXTERNALSYM _PROV_ENUMALGS}
PROV_ENUMALGS = _PROV_ENUMALGS;
{$EXTERNALSYM PROV_ENUMALGS}
TProvEnumAlgs = PROV_ENUMALGS;
PProvEnumAlgs = PPROV_ENUMALGS;
PPROV_ENUMALGS_EX = ^PROV_ENUMALGS_EX;
{$NODEFINE PPROV_ENUMALGS_EX}
_PROV_ENUMALGS_EX = record
aiAlgid: ALG_ID;
dwDefaultLen: DWORD;
dwMinLen: DWORD;
dwMaxLen: DWORD;
dwProtocols: DWORD;
dwNameLen: DWORD;
szName: array [0..19] of CHAR;
dwLongNameLen: DWORD;
szLongName: array [0..39] of CHAR;
end;
{$EXTERNALSYM _PROV_ENUMALGS_EX}
PROV_ENUMALGS_EX = _PROV_ENUMALGS_EX;
{$EXTERNALSYM PROV_ENUMALGS_EX}
TProvEnumAlgsEx = PROV_ENUMALGS_EX;
PProvEnumAlgsEx = PPROV_ENUMALGS_EX;
PPUBLICKEYSTRUC = ^PUBLICKEYSTRUC;
{$NODEFINE PPUBLICKEYSTRUC}
_PUBLICKEYSTRUC = record
bType: BYTE;
bVersion: BYTE;
reserved: WORD;
aiKeyAlg: ALG_ID;
end;
{$EXTERNALSYM _PUBLICKEYSTRUC}
PUBLICKEYSTRUC = _PUBLICKEYSTRUC;
{$EXTERNALSYM PUBLICKEYSTRUC}
BLOBHEADER = _PUBLICKEYSTRUC;
{$EXTERNALSYM BLOBHEADER}
TPublicKeyStruc = PUBLICKEYSTRUC;
PRSAPUBKEY = ^RSAPUBKEY;
{$NODEFINE PRSAPUBKEY}
_RSAPUBKEY = record
magic: DWORD; // Has to be RSA1
bitlen: DWORD; // # of bits in modulus
pubexp: DWORD; // public exponent
// Modulus data follows
end;
{$EXTERNALSYM _RSAPUBKEY}
RSAPUBKEY = _RSAPUBKEY;
{$EXTERNALSYM RSAPUBKEY}
TRsaPubKey = RSAPUBKEY;
_PUBKEY = record
magic: DWORD;
bitlen: DWORD; // # of bits in modulus
end;
{$EXTERNALSYM _PUBKEY}
DHPUBKEY = _PUBKEY;
{$EXTERNALSYM DHPUBKEY}
DSSPUBKEY = _PUBKEY;
{$EXTERNALSYM DSSPUBKEY}
KEAPUBKEY = _PUBKEY;
{$EXTERNALSYM KEAPUBKEY}
TEKPUBKEY = _PUBKEY;
{$EXTERNALSYM TEKPUBKEY}
PDSSSEED = ^DSSSEED;
{$NODEFINE PDSSSEED}
_DSSSEED = record
counter: DWORD;
seed: array [0..19] of BYTE;
end;
{$EXTERNALSYM _DSSSEED}
DSSSEED = _DSSSEED;
{$EXTERNALSYM DSSSEED}
TDssSeed = DSSSEED;
PPUBKEYVER3 = ^PUBKEYVER3;
{$NODEFINE PPUBKEYVER3}
_PUBKEYVER3 = record
magic: DWORD;
bitlenP: DWORD; // # of bits in prime modulus
bitlenQ: DWORD; // # of bits in prime q, 0 if not available
bitlenJ: DWORD; // # of bits in (p-1)/q, 0 if not available
DSSSeed: DSSSEED;
end;
{$EXTERNALSYM _PUBKEYVER3}
PUBKEYVER3 = _PUBKEYVER3;
{$EXTERNALSYM PUBKEYVER3}
DHPUBKEY_VER3 = PUBKEYVER3;
{$EXTERNALSYM DHPUBKEY_VER3}
TPubKeyVer3 = PUBKEYVER3;
PPRIVKEYVER3 = ^DHPRIVKEY_VER3;
{$NODEFINE PPRIVKEYVER3}
_PRIVKEYVER3 = record
magic: DWORD;
bitlenP: DWORD; // # of bits in prime modulus
bitlenQ: DWORD; // # of bits in prime q, 0 if not available
bitlenJ: DWORD; // # of bits in (p-1)/q, 0 if not available
bitlenX: DWORD; // # of bits in X
DSSSeed: DSSSEED;
end;
{$EXTERNALSYM _PRIVKEYVER3}
DHPRIVKEY_VER3 = _PRIVKEYVER3;
{$EXTERNALSYM DHPRIVKEY_VER3}
DSSPRIVKEY_VER3 = _PRIVKEYVER3;
{$EXTERNALSYM DSSPRIVKEY_VER3}
TDssPrivKey3 = DHPRIVKEY_VER3;
PKEY_TYPE_SUBTYPE = ^KEY_TYPE_SUBTYPE;
{$EXTERNALSYM PKEY_TYPE_SUBTYPE}
_KEY_TYPE_SUBTYPE = record
dwKeySpec: DWORD;
Type_: GUID;
Subtype: GUID;
end;
{$EXTERNALSYM _KEY_TYPE_SUBTYPE}
KEY_TYPE_SUBTYPE = _KEY_TYPE_SUBTYPE;
{$EXTERNALSYM KEY_TYPE_SUBTYPE}
TKeyTypeSubType = KEY_TYPE_SUBTYPE;
PKeyTypeSubType = PKEY_TYPE_SUBTYPE;
PCERT_FORTEZZA_DATA_PROP = ^CERT_FORTEZZA_DATA_PROP;
{$NODEFINE PCERT_FORTEZZA_DATA_PROP}
_CERT_FORTEZZA_DATA_PROP = record
SerialNumber: array [0..7] of Byte;
CertIndex: Integer;
CertLabel: array [0..35] of Byte;
end;
{$EXTERNALSYM _CERT_FORTEZZA_DATA_PROP}
CERT_FORTEZZA_DATA_PROP = _CERT_FORTEZZA_DATA_PROP;
{$EXTERNALSYM CERT_FORTEZZA_DATA_PROP}
TCertFortezzaDataProp = CERT_FORTEZZA_DATA_PROP;
PCertFortezzaDataProp = PCERT_FORTEZZA_DATA_PROP;
//+-------------------------------------------------------------------------
// CRYPTOAPI BLOB definitions
//--------------------------------------------------------------------------
type
_CRYPTOAPI_BLOB = record
cbData: DWORD;
pbData: LPBYTE;
end;
{$EXTERNALSYM _CRYPTOAPI_BLOB}
CRYPT_INTEGER_BLOB = _CRYPTOAPI_BLOB;
TCryptIntegerBlob = CRYPT_INTEGER_BLOB;
{$EXTERNALSYM CRYPT_INTEGER_BLOB}
PCRYPT_INTEGER_BLOB = ^_CRYPTOAPI_BLOB;
{$EXTERNALSYM PCRYPT_INTEGER_BLOB}
PCryptIntegerBlob = PCRYPT_INTEGER_BLOB;
CRYPT_UINT_BLOB = _CRYPTOAPI_BLOB;
{$EXTERNALSYM CRYPT_UINT_BLOB}
TCryptUintBlob = CRYPT_UINT_BLOB;
PCRYPT_UINT_BLOB = ^_CRYPTOAPI_BLOB;
{$EXTERNALSYM PCRYPT_UINT_BLOB}
PCryptUintBlob = PCRYPT_UINT_BLOB;
CRYPT_OBJID_BLOB = _CRYPTOAPI_BLOB;
{$EXTERNALSYM CRYPT_OBJID_BLOB}
TCryptObjIdBlob = CRYPT_OBJID_BLOB;
PCRYPT_OBJID_BLOB = ^_CRYPTOAPI_BLOB;
{$EXTERNALSYM PCRYPT_OBJID_BLOB}
PCryptObjIdBlob = PCRYPT_OBJID_BLOB;
CERT_NAME_BLOB = _CRYPTOAPI_BLOB;
{$EXTERNALSYM CERT_NAME_BLOB}
TCertNameBlob = CERT_NAME_BLOB;
PCERT_NAME_BLOB = ^_CRYPTOAPI_BLOB;
{$EXTERNALSYM PCERT_NAME_BLOB}
PCertNameBlob = PCERT_NAME_BLOB;
CERT_RDN_VALUE_BLOB = _CRYPTOAPI_BLOB;
{$EXTERNALSYM CERT_RDN_VALUE_BLOB}
TCertRdnValueBlob = CERT_RDN_VALUE_BLOB;
PCERT_RDN_VALUE_BLOB = ^_CRYPTOAPI_BLOB;
{$EXTERNALSYM PCERT_RDN_VALUE_BLOB}
PCertRdnValueBlob = PCERT_RDN_VALUE_BLOB;
CERT_BLOB = _CRYPTOAPI_BLOB;
{$EXTERNALSYM CERT_BLOB}
TCertBlob = CERT_BLOB;
PCERT_BLOB = ^_CRYPTOAPI_BLOB;
{$EXTERNALSYM PCERT_BLOB}
PCertBlob = PCERT_BLOB;
CRL_BLOB = _CRYPTOAPI_BLOB;
{$EXTERNALSYM CRL_BLOB}
TCrlBlob = CRL_BLOB;
PCRL_BLOB = ^_CRYPTOAPI_BLOB;
{$EXTERNALSYM PCRL_BLOB}
PCrlBlob = PCRL_BLOB;
DATA_BLOB = _CRYPTOAPI_BLOB;
{$EXTERNALSYM DATA_BLOB}
TDataBlob = DATA_BLOB;
PDATA_BLOB = ^_CRYPTOAPI_BLOB;
{$EXTERNALSYM PDATA_BLOB}
PDataBlob = PDATA_BLOB;
CRYPT_DATA_BLOB = _CRYPTOAPI_BLOB;
{$EXTERNALSYM CRYPT_DATA_BLOB}
TCryptDataBlob = CRYPT_DATA_BLOB;
PCRYPT_DATA_BLOB = ^_CRYPTOAPI_BLOB;
{$EXTERNALSYM PCRYPT_DATA_BLOB}
PCryptDataBlob = PCRYPT_DATA_BLOB;
CRYPT_HASH_BLOB = _CRYPTOAPI_BLOB;
{$EXTERNALSYM CRYPT_HASH_BLOB}
TCryptHashBlob = CRYPT_HASH_BLOB;
PCRYPT_HASH_BLOB = ^_CRYPTOAPI_BLOB;
{$EXTERNALSYM PCRYPT_HASH_BLOB}
PCryptHashBlob = PCRYPT_HASH_BLOB;
CRYPT_DIGEST_BLOB = _CRYPTOAPI_BLOB;
{$EXTERNALSYM CRYPT_DIGEST_BLOB}
TCryptDigestBlob = CRYPT_DIGEST_BLOB;
PCRYPT_DIGEST_BLOB = ^_CRYPTOAPI_BLOB;
{$EXTERNALSYM PCRYPT_DIGEST_BLOB}
PCryptDigestBlob = PCRYPT_DIGEST_BLOB;
CRYPT_DER_BLOB = _CRYPTOAPI_BLOB;
{$EXTERNALSYM CRYPT_DER_BLOB}
TCyptDerBlob = CRYPT_DER_BLOB;
PCRYPT_DER_BLOB = ^_CRYPTOAPI_BLOB;
{$EXTERNALSYM PCRYPT_DER_BLOB}
PCyptDerBlob = PCRYPT_DER_BLOB;
CRYPT_ATTR_BLOB = _CRYPTOAPI_BLOB;
{$EXTERNALSYM CRYPT_ATTR_BLOB}
TCryptAttrBlob = CRYPT_ATTR_BLOB;
PCRYPT_ATTR_BLOB = ^_CRYPTOAPI_BLOB;
{$EXTERNALSYM PCRYPT_ATTR_BLOB}
PCryptAttrBlob = PCRYPT_ATTR_BLOB;
// structure for use with CryptSetKeyParam for CMS keys
PCMS_DH_KEY_INFO = ^CMS_DH_KEY_INFO;
{$EXTERNALSYM PCMS_DH_KEY_INFO}
_CMS_DH_KEY_INFO = record
dwVersion: DWORD; // sizeof(CMS_DH_KEY_INFO)
Algid: ALG_ID; // algorithmm id for the key to be converted
pszContentEncObjId: LPSTR; // pointer to OID to hash in with Z
PubInfo: CRYPT_DATA_BLOB; // OPTIONAL - public information
pReserved: Pointer; // reserved - should be NULL
end;
{$EXTERNALSYM _CMS_DH_KEY_INFO}
CMS_DH_KEY_INFO = _CMS_DH_KEY_INFO;
{$EXTERNALSYM CMS_DH_KEY_INFO}
TCmsDhKeyInfo = CMS_DH_KEY_INFO;
PCmsDhKeyInfo = PCMS_DH_KEY_INFO;
function CryptAcquireContextA(var phProv: HCRYPTPROV; pszContainer: LPCSTR;
pszProvider: LPCSTR; dwProvType: DWORD; dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptAcquireContextA}
function CryptAcquireContextW(var phProv: HCRYPTPROV; pszContainer: LPCWSTR;
pszProvider: LPCWSTR; dwProvType: DWORD; dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptAcquireContextW}
function CryptAcquireContext(var phProv: HCRYPTPROV; pszContainer: LPCTSTR;
pszProvider: LPCTSTR; dwProvType: DWORD; dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptAcquireContext}
function CryptReleaseContext(hProv: HCRYPTPROV; dwFlags: ULONG_PTR): BOOL; stdcall;
{$EXTERNALSYM CryptReleaseContext}
function CryptGenKey(hProv: HCRYPTPROV; Algid: ALG_ID; dwFlags: DWORD;
var phKey: HCRYPTKEY): BOOL; stdcall;
{$EXTERNALSYM CryptGenKey}
function CryptDeriveKey(hProv: HCRYPTPROV; Algid: ALG_ID; hBaseData: HCRYPTHASH;
dwFlags: DWORD; var phKey: HCRYPTKEY): BOOL; stdcall;
{$EXTERNALSYM CryptDeriveKey}
function CryptDestroyKey(hKey: HCRYPTKEY): BOOL; stdcall;
{$EXTERNALSYM CryptDestroyKey}
function CryptSetKeyParam(hKey: HCRYPTKEY; dwParam: DWORD; pbData: LPBYTE;
dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptSetKeyParam}
function CryptGetKeyParam(hKey: HCRYPTKEY; dwParam: DWORD; pbData: LPBYTE;
var pdwDataLen: DWORD; dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptGetKeyParam}
function CryptSetHashParam(hHash: HCRYPTHASH; dwParam: DWORD; pbData: LPBYTE;
dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptSetHashParam}
function CryptGetHashParam(hHash: HCRYPTHASH; dwParam: DWORD; pbData: LPBYTE;
var pdwDataLen: DWORD; dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptGetHashParam}
function CryptSetProvParam(hProv: HCRYPTPROV; dwParam: DWORD; pbData: LPBYTE;
dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptSetProvParam}
function CryptGetProvParam(hProv: HCRYPTPROV; dwParam: DWORD; pbData: LPBYTE;
var pdwDataLen: DWORD; dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptGetProvParam}
function CryptGenRandom(hProv: HCRYPTPROV; dwLen: DWORD; pbBuffer: LPBYTE): BOOL; stdcall;
{$EXTERNALSYM CryptGenRandom}
function CryptGetUserKey(hProv: HCRYPTPROV; dwKeySpec: DWORD; var phUserKey: HCRYPTKEY): BOOL; stdcall;
{$EXTERNALSYM CryptGetUserKey}
function CryptExportKey(hKey, hExpKey: HCRYPTKEY; dwBlobType, dwFlags: DWORD;
pbData: LPBYTE; var pdwDataLen: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptExportKey}
function CryptImportKey(hProv: HCRYPTPROV; pbData: LPBYTE; dwDataLen: DWORD;
hPubKey: HCRYPTKEY; dwFlags: DWORD; var phKey: HCRYPTKEY): BOOL; stdcall;
{$EXTERNALSYM CryptImportKey}
function CryptEncrypt(hKey: HCRYPTKEY; hHash: HCRYPTHASH; Final: BOOL;
dwFlags: DWORD; pbData: LPBYTE; var pdwDataLen: DWORD; dwBufLen: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptEncrypt}
function CryptDecrypt(hKey: HCRYPTKEY; hHash: HCRYPTHASH; Final: BOOL;
dwFlags: DWORD; pbData: LPBYTE; var pdwDataLen: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptDecrypt}
function CryptCreateHash(hProv: HCRYPTPROV; Algid: ALG_ID; hKey: HCRYPTKEY;
dwFlags: DWORD; var phHash: HCRYPTHASH): BOOL; stdcall;
{$EXTERNALSYM CryptCreateHash}
function CryptHashData(hHash: HCRYPTHASH; pbData: LPBYTE; dwDataLen, dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptHashData}
function CryptHashSessionKey(hHash: HCRYPTHASH; hKey: HCRYPTKEY; dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptHashSessionKey}
function CryptDestroyHash(hHash: HCRYPTHASH): BOOL; stdcall;
{$EXTERNALSYM CryptDestroyHash}
function CryptSignHashA(hHash: HCRYPTHASH; dwKeySpec: DWORD; sDescription: LPCSTR;
dwFlags: DWORD; pbSignature: LPBYTE; var pdwSigLen: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptSignHashA}
function CryptSignHashW(hHash: HCRYPTHASH; dwKeySpec: DWORD; sDescription: LPCWSTR;
dwFlags: DWORD; pbSignature: LPBYTE; var pdwSigLen: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptSignHashW}
function CryptSignHash(hHash: HCRYPTHASH; dwKeySpec: DWORD; sDescription: LPCTSTR;
dwFlags: DWORD; pbSignature: LPBYTE; var pdwSigLen: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptSignHash}
function CryptVerifySignatureA(hHash: HCRYPTHASH; pbSignature: LPBYTE;
dwSigLen: DWORD; hPubKey: HCRYPTKEY; sDescription: LPCSTR; dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptVerifySignatureA}
function CryptVerifySignatureW(hHash: HCRYPTHASH; pbSignature: LPBYTE;
dwSigLen: DWORD; hPubKey: HCRYPTKEY; sDescription: LPCWSTR; dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptVerifySignatureW}
function CryptVerifySignature(hHash: HCRYPTHASH; pbSignature: LPBYTE;
dwSigLen: DWORD; hPubKey: HCRYPTKEY; sDescription: LPCTSTR; dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptVerifySignature}
function CryptSetProviderA(pszProvName: LPCSTR; dwProvType: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptSetProviderA}
function CryptSetProviderW(pszProvName: LPCWSTR; dwProvType: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptSetProviderW}
function CryptSetProvider(pszProvName: LPCTSTR; dwProvType: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptSetProvider}
function CryptSetProviderExA(pszProvName: LPCSTR; dwProvType: DWORD;
pdwReserved: LPDWORD; dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptSetProviderExA}
function CryptSetProviderExW(pszProvName: LPCWSTR; dwProvType: DWORD;
pdwReserved: LPDWORD; dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptSetProviderExW}
function CryptSetProviderEx(pszProvName: LPCTSTR; dwProvType: DWORD;
pdwReserved: LPDWORD; dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptSetProviderEx}
function CryptGetDefaultProviderA(dwProvType: DWORD; pdwReserved: LPDWORD;
dwFlags: DWORD; pszProvName: LPSTR; var pcbProvName: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptGetDefaultProviderA}
function CryptGetDefaultProviderW(dwProvType: DWORD; pdwReserved: LPDWORD;
dwFlags: DWORD; pszProvName: LPWSTR; var pcbProvName: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptGetDefaultProviderW}
function CryptGetDefaultProvider(dwProvType: DWORD; pdwReserved: LPDWORD;
dwFlags: DWORD; pszProvName: LPTSTR; var pcbProvName: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptGetDefaultProvider}
function CryptEnumProviderTypesA(dwIndex: DWORD; pdwReserved: LPDWORD;
dwFlags: DWORD; var pdwProvType: DWORD; pszTypeName: LPSTR;
var pcbTypeName: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptEnumProviderTypesA}
function CryptEnumProviderTypesW(dwIndex: DWORD; pdwReserved: LPDWORD;
dwFlags: DWORD; var pdwProvType: DWORD; pszTypeName: LPWSTR;
var pcbTypeName: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptEnumProviderTypesW}
function CryptEnumProviderTypes(dwIndex: DWORD; pdwReserved: LPDWORD;
dwFlags: DWORD; var pdwProvType: DWORD; pszTypeName: LPTSTR;
var pcbTypeName: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptEnumProviderTypes}
function CryptEnumProvidersA(dwIndex: DWORD; pdwReserved: LPDWORD; dwFlags: DWORD;
var pdwProvType: DWORD; pszProvName: LPSTR; var pcbProvName: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptEnumProvidersA}
function CryptEnumProvidersW(dwIndex: DWORD; pdwReserved: LPDWORD; dwFlags: DWORD;
var pdwProvType: DWORD; pszProvName: LPWSTR; var pcbProvName: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptEnumProvidersW}
function CryptEnumProviders(dwIndex: DWORD; pdwReserved: LPDWORD; dwFlags: DWORD;
var pdwProvType: DWORD; pszProvName: LPTSTR; var pcbProvName: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptEnumProviders}
function CryptContextAddRef(hProv: HCRYPTPROV; pdwReserved: LPDWORD; dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptContextAddRef}
function CryptDuplicateKey(hKey: HCRYPTKEY; pdwReserved: LPDWORD; dwFlags: DWORD;
var phKey: HCRYPTKEY): BOOL; stdcall;
{$EXTERNALSYM CryptDuplicateKey}
function CryptDuplicateHash(hHash: HCRYPTHASH; pdwReserved: LPDWORD;
dwFlags: DWORD; var phHash: HCRYPTHASH): BOOL; stdcall;
{$EXTERNALSYM CryptDuplicateHash}
//+-------------------------------------------------------------------------
// In a CRYPT_BIT_BLOB the last byte may contain 0-7 unused bits. Therefore, the
// overall bit length is cbData * 8 - cUnusedBits.
//--------------------------------------------------------------------------
type
PCRYPT_BIT_BLOB = ^CRYPT_BIT_BLOB;
{$EXTERNALSYM PCRYPT_BIT_BLOB}
_CRYPT_BIT_BLOB = record
cbData: DWORD;
pbData: LPBYTE;
cUnusedBits: DWORD;
end;
{$EXTERNALSYM _CRYPT_BIT_BLOB}
CRYPT_BIT_BLOB = _CRYPT_BIT_BLOB;
{$EXTERNALSYM CRYPT_BIT_BLOB}
TCryptBitBlob = CRYPT_BIT_BLOB;
PCryptBitBlob = PCRYPT_BIT_BLOB;
//+-------------------------------------------------------------------------
// Type used for any algorithm
//
// Where the Parameters CRYPT_OBJID_BLOB is in its encoded representation. For most
// algorithm types, the Parameters CRYPT_OBJID_BLOB is NULL (Parameters.cbData = 0).
//--------------------------------------------------------------------------
type
PCRYPT_ALGORITHM_IDENTIFIER = ^CRYPT_ALGORITHM_IDENTIFIER;
{$EXTERNALSYM PCRYPT_ALGORITHM_IDENTIFIER}
_CRYPT_ALGORITHM_IDENTIFIER = record
pszObjId: LPSTR;
Parameters: CRYPT_OBJID_BLOB;
end;
{$EXTERNALSYM _CRYPT_ALGORITHM_IDENTIFIER}
CRYPT_ALGORITHM_IDENTIFIER = _CRYPT_ALGORITHM_IDENTIFIER;
{$EXTERNALSYM CRYPT_ALGORITHM_IDENTIFIER}
TCryptAlgorithmIdentifier = CRYPT_ALGORITHM_IDENTIFIER;
PCryptAlgorithmIdentifier = PCRYPT_ALGORITHM_IDENTIFIER;
// Following are the definitions of various algorithm object identifiers
// RSA
const
szOID_RSA = '1.2.840.113549';
{$EXTERNALSYM szOID_RSA}
szOID_PKCS = '1.2.840.113549.1';
{$EXTERNALSYM szOID_PKCS}
szOID_RSA_HASH = '1.2.840.113549.2';
{$EXTERNALSYM szOID_RSA_HASH}
szOID_RSA_ENCRYPT = '1.2.840.113549.3';
{$EXTERNALSYM szOID_RSA_ENCRYPT}
szOID_PKCS_1 = '1.2.840.113549.1.1';
{$EXTERNALSYM szOID_PKCS_1}
szOID_PKCS_2 = '1.2.840.113549.1.2';
{$EXTERNALSYM szOID_PKCS_2}
szOID_PKCS_3 = '1.2.840.113549.1.3';
{$EXTERNALSYM szOID_PKCS_3}
szOID_PKCS_4 = '1.2.840.113549.1.4';
{$EXTERNALSYM szOID_PKCS_4}
szOID_PKCS_5 = '1.2.840.113549.1.5';
{$EXTERNALSYM szOID_PKCS_5}
szOID_PKCS_6 = '1.2.840.113549.1.6';
{$EXTERNALSYM szOID_PKCS_6}
szOID_PKCS_7 = '1.2.840.113549.1.7';
{$EXTERNALSYM szOID_PKCS_7}
szOID_PKCS_8 = '1.2.840.113549.1.8';
{$EXTERNALSYM szOID_PKCS_8}
szOID_PKCS_9 = '1.2.840.113549.1.9';
{$EXTERNALSYM szOID_PKCS_9}
szOID_PKCS_10 = '1.2.840.113549.1.10';
{$EXTERNALSYM szOID_PKCS_10}
szOID_PKCS_12 = '1.2.840.113549.1.12';
{$EXTERNALSYM szOID_PKCS_12}
szOID_RSA_RSA = '1.2.840.113549.1.1.1';
{$EXTERNALSYM szOID_RSA_RSA}
szOID_RSA_MD2RSA = '1.2.840.113549.1.1.2';
{$EXTERNALSYM szOID_RSA_MD2RSA}
szOID_RSA_MD4RSA = '1.2.840.113549.1.1.3';
{$EXTERNALSYM szOID_RSA_MD4RSA}
szOID_RSA_MD5RSA = '1.2.840.113549.1.1.4';
{$EXTERNALSYM szOID_RSA_MD5RSA}
szOID_RSA_SHA1RSA = '1.2.840.113549.1.1.5';
{$EXTERNALSYM szOID_RSA_SHA1RSA}
szOID_RSA_SETOAEP_RSA = '1.2.840.113549.1.1.6';
{$EXTERNALSYM szOID_RSA_SETOAEP_RSA}
szOID_RSA_DH = '1.2.840.113549.1.3.1';
{$EXTERNALSYM szOID_RSA_DH}
szOID_RSA_data = '1.2.840.113549.1.7.1';
{$EXTERNALSYM szOID_RSA_data}
szOID_RSA_signedData = '1.2.840.113549.1.7.2';
{$EXTERNALSYM szOID_RSA_signedData}
szOID_RSA_envelopedData = '1.2.840.113549.1.7.3';
{$EXTERNALSYM szOID_RSA_envelopedData}
szOID_RSA_signEnvData = '1.2.840.113549.1.7.4';
{$EXTERNALSYM szOID_RSA_signEnvData}
szOID_RSA_digestedData = '1.2.840.113549.1.7.5';
{$EXTERNALSYM szOID_RSA_digestedData}
szOID_RSA_hashedData = '1.2.840.113549.1.7.5';
{$EXTERNALSYM szOID_RSA_hashedData}
szOID_RSA_encryptedData = '1.2.840.113549.1.7.6';
{$EXTERNALSYM szOID_RSA_encryptedData}
szOID_RSA_emailAddr = '1.2.840.113549.1.9.1';
{$EXTERNALSYM szOID_RSA_emailAddr}
szOID_RSA_unstructName = '1.2.840.113549.1.9.2';
{$EXTERNALSYM szOID_RSA_unstructName}
szOID_RSA_contentType = '1.2.840.113549.1.9.3';
{$EXTERNALSYM szOID_RSA_contentType}
szOID_RSA_messageDigest = '1.2.840.113549.1.9.4';
{$EXTERNALSYM szOID_RSA_messageDigest}
szOID_RSA_signingTime = '1.2.840.113549.1.9.5';
{$EXTERNALSYM szOID_RSA_signingTime}
szOID_RSA_counterSign = '1.2.840.113549.1.9.6';
{$EXTERNALSYM szOID_RSA_counterSign}
szOID_RSA_challengePwd = '1.2.840.113549.1.9.7';
{$EXTERNALSYM szOID_RSA_challengePwd}
szOID_RSA_unstructAddr = '1.2.840.113549.1.9.8';
{$EXTERNALSYM szOID_RSA_unstructAddr}
szOID_RSA_extCertAttrs = '1.2.840.113549.1.9.9';
{$EXTERNALSYM szOID_RSA_extCertAttrs}
szOID_RSA_certExtensions = '1.2.840.113549.1.9.14';
{$EXTERNALSYM szOID_RSA_certExtensions}
szOID_RSA_SMIMECapabilities = '1.2.840.113549.1.9.15';
{$EXTERNALSYM szOID_RSA_SMIMECapabilities}
szOID_RSA_preferSignedData = '1.2.840.113549.1.9.15.1';
{$EXTERNALSYM szOID_RSA_preferSignedData}
szOID_RSA_SMIMEalg = '1.2.840.113549.1.9.16.3';
{$EXTERNALSYM szOID_RSA_SMIMEalg}
szOID_RSA_SMIMEalgESDH = '1.2.840.113549.1.9.16.3.5';
{$EXTERNALSYM szOID_RSA_SMIMEalgESDH}
szOID_RSA_SMIMEalgCMS3DESwrap = '1.2.840.113549.1.9.16.3.6';
{$EXTERNALSYM szOID_RSA_SMIMEalgCMS3DESwrap}
szOID_RSA_SMIMEalgCMSRC2wrap = '1.2.840.113549.1.9.16.3.7';
{$EXTERNALSYM szOID_RSA_SMIMEalgCMSRC2wrap}
szOID_RSA_MD2 = '1.2.840.113549.2.2';
{$EXTERNALSYM szOID_RSA_MD2}
szOID_RSA_MD4 = '1.2.840.113549.2.4';
{$EXTERNALSYM szOID_RSA_MD4}
szOID_RSA_MD5 = '1.2.840.113549.2.5';
{$EXTERNALSYM szOID_RSA_MD5}
szOID_RSA_RC2CBC = '1.2.840.113549.3.2';
{$EXTERNALSYM szOID_RSA_RC2CBC}
szOID_RSA_RC4 = '1.2.840.113549.3.4';
{$EXTERNALSYM szOID_RSA_RC4}
szOID_RSA_DES_EDE3_CBC = '1.2.840.113549.3.7';
{$EXTERNALSYM szOID_RSA_DES_EDE3_CBC}
szOID_RSA_RC5_CBCPad = '1.2.840.113549.3.9';
{$EXTERNALSYM szOID_RSA_RC5_CBCPad}
szOID_ANSI_X942 = '1.2.840.10046';
{$EXTERNALSYM szOID_ANSI_X942}
szOID_ANSI_X942_DH = '1.2.840.10046.2.1';
{$EXTERNALSYM szOID_ANSI_X942_DH}
szOID_X957 = '1.2.840.10040';
{$EXTERNALSYM szOID_X957}
szOID_X957_DSA = '1.2.840.10040.4.1';
{$EXTERNALSYM szOID_X957_DSA}
szOID_X957_SHA1DSA = '1.2.840.10040.4.3';
{$EXTERNALSYM szOID_X957_SHA1DSA}
// ITU-T UsefulDefinitions
szOID_DS = '2.5';
{$EXTERNALSYM szOID_DS}
szOID_DSALG = '2.5.8';
{$EXTERNALSYM szOID_DSALG}
szOID_DSALG_CRPT = '2.5.8.1';
{$EXTERNALSYM szOID_DSALG_CRPT}
szOID_DSALG_HASH = '2.5.8.2';
{$EXTERNALSYM szOID_DSALG_HASH}
szOID_DSALG_SIGN = '2.5.8.3';
{$EXTERNALSYM szOID_DSALG_SIGN}
szOID_DSALG_RSA = '2.5.8.1.1';
{$EXTERNALSYM szOID_DSALG_RSA}
// NIST OSE Implementors' Workshop (OIW)
// http://nemo.ncsl.nist.gov/oiw/agreements/stable/OSI/12s_9506.w51
// http://nemo.ncsl.nist.gov/oiw/agreements/working/OSI/12w_9503.w51
szOID_OIW = '1.3.14';
{$EXTERNALSYM szOID_OIW}
// NIST OSE Implementors' Workshop (OIW) Security SIG algorithm identifiers
szOID_OIWSEC = '1.3.14.3.2';
{$EXTERNALSYM szOID_OIWSEC}
szOID_OIWSEC_md4RSA = '1.3.14.3.2.2';
{$EXTERNALSYM szOID_OIWSEC_md4RSA}
szOID_OIWSEC_md5RSA = '1.3.14.3.2.3';
{$EXTERNALSYM szOID_OIWSEC_md5RSA}
szOID_OIWSEC_md4RSA2 = '1.3.14.3.2.4';
{$EXTERNALSYM szOID_OIWSEC_md4RSA2}
szOID_OIWSEC_desECB = '1.3.14.3.2.6';
{$EXTERNALSYM szOID_OIWSEC_desECB}
szOID_OIWSEC_desCBC = '1.3.14.3.2.7';
{$EXTERNALSYM szOID_OIWSEC_desCBC}
szOID_OIWSEC_desOFB = '1.3.14.3.2.8';
{$EXTERNALSYM szOID_OIWSEC_desOFB}
szOID_OIWSEC_desCFB = '1.3.14.3.2.9';
{$EXTERNALSYM szOID_OIWSEC_desCFB}
szOID_OIWSEC_desMAC = '1.3.14.3.2.10';
{$EXTERNALSYM szOID_OIWSEC_desMAC}
szOID_OIWSEC_rsaSign = '1.3.14.3.2.11';
{$EXTERNALSYM szOID_OIWSEC_rsaSign}
szOID_OIWSEC_dsa = '1.3.14.3.2.12';
{$EXTERNALSYM szOID_OIWSEC_dsa}
szOID_OIWSEC_shaDSA = '1.3.14.3.2.13';
{$EXTERNALSYM szOID_OIWSEC_shaDSA}
szOID_OIWSEC_mdc2RSA = '1.3.14.3.2.14';
{$EXTERNALSYM szOID_OIWSEC_mdc2RSA}
szOID_OIWSEC_shaRSA = '1.3.14.3.2.15';
{$EXTERNALSYM szOID_OIWSEC_shaRSA}
szOID_OIWSEC_dhCommMod = '1.3.14.3.2.16';
{$EXTERNALSYM szOID_OIWSEC_dhCommMod}
szOID_OIWSEC_desEDE = '1.3.14.3.2.17';
{$EXTERNALSYM szOID_OIWSEC_desEDE}
szOID_OIWSEC_sha = '1.3.14.3.2.18';
{$EXTERNALSYM szOID_OIWSEC_sha}
szOID_OIWSEC_mdc2 = '1.3.14.3.2.19';
{$EXTERNALSYM szOID_OIWSEC_mdc2}
szOID_OIWSEC_dsaComm = '1.3.14.3.2.20';
{$EXTERNALSYM szOID_OIWSEC_dsaComm}
szOID_OIWSEC_dsaCommSHA = '1.3.14.3.2.21';
{$EXTERNALSYM szOID_OIWSEC_dsaCommSHA}
szOID_OIWSEC_rsaXchg = '1.3.14.3.2.22';
{$EXTERNALSYM szOID_OIWSEC_rsaXchg}
szOID_OIWSEC_keyHashSeal = '1.3.14.3.2.23';
{$EXTERNALSYM szOID_OIWSEC_keyHashSeal}
szOID_OIWSEC_md2RSASign = '1.3.14.3.2.24';
{$EXTERNALSYM szOID_OIWSEC_md2RSASign}
szOID_OIWSEC_md5RSASign = '1.3.14.3.2.25';
{$EXTERNALSYM szOID_OIWSEC_md5RSASign}
szOID_OIWSEC_sha1 = '1.3.14.3.2.26';
{$EXTERNALSYM szOID_OIWSEC_sha1}
szOID_OIWSEC_dsaSHA1 = '1.3.14.3.2.27';
{$EXTERNALSYM szOID_OIWSEC_dsaSHA1}
szOID_OIWSEC_dsaCommSHA1 = '1.3.14.3.2.28';
{$EXTERNALSYM szOID_OIWSEC_dsaCommSHA1}
szOID_OIWSEC_sha1RSASign = '1.3.14.3.2.29';
{$EXTERNALSYM szOID_OIWSEC_sha1RSASign}
// NIST OSE Implementors' Workshop (OIW) Directory SIG algorithm identifiers
szOID_OIWDIR = '1.3.14.7.2';
{$EXTERNALSYM szOID_OIWDIR}
szOID_OIWDIR_CRPT = '1.3.14.7.2.1';
{$EXTERNALSYM szOID_OIWDIR_CRPT}
szOID_OIWDIR_HASH = '1.3.14.7.2.2';
{$EXTERNALSYM szOID_OIWDIR_HASH}
szOID_OIWDIR_SIGN = '1.3.14.7.2.3';
{$EXTERNALSYM szOID_OIWDIR_SIGN}
szOID_OIWDIR_md2 = '1.3.14.7.2.2.1';
{$EXTERNALSYM szOID_OIWDIR_md2}
szOID_OIWDIR_md2RSA = '1.3.14.7.2.3.1';
{$EXTERNALSYM szOID_OIWDIR_md2RSA}
// INFOSEC Algorithms
// joint-iso-ccitt(2) country(16) us(840) organization(1) us-government(101) dod(2) id-infosec(1)
szOID_INFOSEC = '2.16.840.1.101.2.1';
{$EXTERNALSYM szOID_INFOSEC}
szOID_INFOSEC_sdnsSignature = '2.16.840.1.101.2.1.1.1';
{$EXTERNALSYM szOID_INFOSEC_sdnsSignature}
szOID_INFOSEC_mosaicSignature = '2.16.840.1.101.2.1.1.2';
{$EXTERNALSYM szOID_INFOSEC_mosaicSignature}
szOID_INFOSEC_sdnsConfidentiality = '2.16.840.1.101.2.1.1.3';
{$EXTERNALSYM szOID_INFOSEC_sdnsConfidentiality}
szOID_INFOSEC_mosaicConfidentiality = '2.16.840.1.101.2.1.1.4';
{$EXTERNALSYM szOID_INFOSEC_mosaicConfidentiality}
szOID_INFOSEC_sdnsIntegrity = '2.16.840.1.101.2.1.1.5';
{$EXTERNALSYM szOID_INFOSEC_sdnsIntegrity}
szOID_INFOSEC_mosaicIntegrity = '2.16.840.1.101.2.1.1.6';
{$EXTERNALSYM szOID_INFOSEC_mosaicIntegrity}
szOID_INFOSEC_sdnsTokenProtection = '2.16.840.1.101.2.1.1.7';
{$EXTERNALSYM szOID_INFOSEC_sdnsTokenProtection}
szOID_INFOSEC_mosaicTokenProtection = '2.16.840.1.101.2.1.1.8';
{$EXTERNALSYM szOID_INFOSEC_mosaicTokenProtection}
szOID_INFOSEC_sdnsKeyManagement = '2.16.840.1.101.2.1.1.9';
{$EXTERNALSYM szOID_INFOSEC_sdnsKeyManagement}
szOID_INFOSEC_mosaicKeyManagement = '2.16.840.1.101.2.1.1.10';
{$EXTERNALSYM szOID_INFOSEC_mosaicKeyManagement}
szOID_INFOSEC_sdnsKMandSig = '2.16.840.1.101.2.1.1.11';
{$EXTERNALSYM szOID_INFOSEC_sdnsKMandSig}
szOID_INFOSEC_mosaicKMandSig = '2.16.840.1.101.2.1.1.12';
{$EXTERNALSYM szOID_INFOSEC_mosaicKMandSig}
szOID_INFOSEC_SuiteASignature = '2.16.840.1.101.2.1.1.13';
{$EXTERNALSYM szOID_INFOSEC_SuiteASignature}
szOID_INFOSEC_SuiteAConfidentiality = '2.16.840.1.101.2.1.1.14';
{$EXTERNALSYM szOID_INFOSEC_SuiteAConfidentiality}
szOID_INFOSEC_SuiteAIntegrity = '2.16.840.1.101.2.1.1.15';
{$EXTERNALSYM szOID_INFOSEC_SuiteAIntegrity}
szOID_INFOSEC_SuiteATokenProtection = '2.16.840.1.101.2.1.1.16';
{$EXTERNALSYM szOID_INFOSEC_SuiteATokenProtection}
szOID_INFOSEC_SuiteAKeyManagement = '2.16.840.1.101.2.1.1.17';
{$EXTERNALSYM szOID_INFOSEC_SuiteAKeyManagement}
szOID_INFOSEC_SuiteAKMandSig = '2.16.840.1.101.2.1.1.18';
{$EXTERNALSYM szOID_INFOSEC_SuiteAKMandSig}
szOID_INFOSEC_mosaicUpdatedSig = '2.16.840.1.101.2.1.1.19';
{$EXTERNALSYM szOID_INFOSEC_mosaicUpdatedSig}
szOID_INFOSEC_mosaicKMandUpdSig = '2.16.840.1.101.2.1.1.20';
{$EXTERNALSYM szOID_INFOSEC_mosaicKMandUpdSig}
szOID_INFOSEC_mosaicUpdatedInteg = '2.16.840.1.101.2.1.1.21';
{$EXTERNALSYM szOID_INFOSEC_mosaicUpdatedInteg}
type
PCRYPT_OBJID_TABLE = ^CRYPT_OBJID_TABLE;
{$EXTERNALSYM PCRYPT_OBJID_TABLE}
_CRYPT_OBJID_TABLE = record
dwAlgId: DWORD;
pszObjId: LPCSTR;
end;
{$EXTERNALSYM _CRYPT_OBJID_TABLE}
CRYPT_OBJID_TABLE = _CRYPT_OBJID_TABLE;
{$EXTERNALSYM CRYPT_OBJID_TABLE}
TCryptObjIdTable = CRYPT_OBJID_TABLE;
PCryptObjIdTable = PCRYPT_OBJID_TABLE;
//+-------------------------------------------------------------------------
// PKCS #1 HashInfo (DigestInfo)
//--------------------------------------------------------------------------
PCRYPT_HASH_INFO = ^CRYPT_HASH_INFO;
{$EXTERNALSYM PCRYPT_HASH_INFO}
_CRYPT_HASH_INFO = record
HashAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
Hash: CRYPT_HASH_BLOB;
end;
{$EXTERNALSYM _CRYPT_HASH_INFO}
CRYPT_HASH_INFO = _CRYPT_HASH_INFO;
{$EXTERNALSYM CRYPT_HASH_INFO}
TCryptHashInfo = CRYPT_HASH_INFO;
PCryptHashInfo = PCRYPT_HASH_INFO;
//+-------------------------------------------------------------------------
// Type used for an extension to an encoded content
//
// Where the Value's CRYPT_OBJID_BLOB is in its encoded representation.
//--------------------------------------------------------------------------
PCERT_EXTENSION = ^CERT_EXTENSION;
{$EXTERNALSYM PCERT_EXTENSION}
_CERT_EXTENSION = record
pszObjId: LPSTR;
fCritical: BOOL;
Value: CRYPT_OBJID_BLOB;
end;
{$EXTERNALSYM _CERT_EXTENSION}
CERT_EXTENSION = _CERT_EXTENSION;
{$EXTERNALSYM CERT_EXTENSION}
TCertExtension = CERT_EXTENSION;
PCertExtension = PCERT_EXTENSION;
//+-------------------------------------------------------------------------
// AttributeTypeValue
//
// Where the Value's CRYPT_OBJID_BLOB is in its encoded representation.
//--------------------------------------------------------------------------
PCRYPT_ATTRIBUTE_TYPE_VALUE = ^CRYPT_ATTRIBUTE_TYPE_VALUE;
{$EXTERNALSYM PCRYPT_ATTRIBUTE_TYPE_VALUE}
_CRYPT_ATTRIBUTE_TYPE_VALUE = record
pszObjId: LPSTR;
Value: CRYPT_OBJID_BLOB;
end;
{$EXTERNALSYM _CRYPT_ATTRIBUTE_TYPE_VALUE}
CRYPT_ATTRIBUTE_TYPE_VALUE = _CRYPT_ATTRIBUTE_TYPE_VALUE;
{$EXTERNALSYM CRYPT_ATTRIBUTE_TYPE_VALUE}
TCryptAttributeTypeValue = CRYPT_ATTRIBUTE_TYPE_VALUE;
PCryptAttributeTypeValue = PCRYPT_ATTRIBUTE_TYPE_VALUE;
//+-------------------------------------------------------------------------
// Attributes
//
// Where the Value's PATTR_BLOBs are in their encoded representation.
//--------------------------------------------------------------------------
PCRYPT_ATTRIBUTE = ^CRYPT_ATTRIBUTE;
{$EXTERNALSYM PCRYPT_ATTRIBUTE}
_CRYPT_ATTRIBUTE = record
pszObjId: LPSTR;
cValue: DWORD;
rgValue: PCRYPT_ATTR_BLOB;
end;
{$EXTERNALSYM _CRYPT_ATTRIBUTE}
CRYPT_ATTRIBUTE = _CRYPT_ATTRIBUTE;
{$EXTERNALSYM CRYPT_ATTRIBUTE}
TCryptAttribute = CRYPT_ATTRIBUTE;
PCryptAttribute = PCRYPT_ATTRIBUTE;
PCRYPT_ATTRIBUTES = ^CRYPT_ATTRIBUTES;
{$EXTERNALSYM PCRYPT_ATTRIBUTES}
_CRYPT_ATTRIBUTES = record
cAttr: DWORD;
rgAttr: PCRYPT_ATTRIBUTE;
end;
{$EXTERNALSYM _CRYPT_ATTRIBUTES}
CRYPT_ATTRIBUTES = _CRYPT_ATTRIBUTES;
{$EXTERNALSYM CRYPT_ATTRIBUTES}
TCryptAttributes = CRYPT_ATTRIBUTES;
PCryptAttributes = PCRYPT_ATTRIBUTES;
//+-------------------------------------------------------------------------
// Attributes making up a Relative Distinguished Name (CERT_RDN)
//
// The interpretation of the Value depends on the dwValueType.
// See below for a list of the types.
//--------------------------------------------------------------------------
PCERT_RDN_ATTR = ^CERT_RDN_ATTR;
{$EXTERNALSYM PCERT_RDN_ATTR}
_CERT_RDN_ATTR = record
pszObjId: LPSTR;
dwValueType: DWORD;
Value: CERT_RDN_VALUE_BLOB;
end;
{$EXTERNALSYM _CERT_RDN_ATTR}
CERT_RDN_ATTR = _CERT_RDN_ATTR;
{$EXTERNALSYM CERT_RDN_ATTR}
TCertRdnAttr = CERT_RDN_ATTR;
PCertRdnAttr = PCERT_RDN_ATTR;
//+-------------------------------------------------------------------------
// CERT_RDN attribute Object Identifiers
//--------------------------------------------------------------------------
// Labeling attribute types:
const
szOID_COMMON_NAME = '2.5.4.3'; // case-ignore string
{$EXTERNALSYM szOID_COMMON_NAME}
szOID_SUR_NAME = '2.5.4.4'; // case-ignore string
{$EXTERNALSYM szOID_SUR_NAME}
szOID_DEVICE_SERIAL_NUMBER = '2.5.4.5'; // printable string
{$EXTERNALSYM szOID_DEVICE_SERIAL_NUMBER}
// Geographic attribute types:
szOID_COUNTRY_NAME = '2.5.4.6'; // printable 2char string
{$EXTERNALSYM szOID_COUNTRY_NAME}
szOID_LOCALITY_NAME = '2.5.4.7'; // case-ignore string
{$EXTERNALSYM szOID_LOCALITY_NAME}
szOID_STATE_OR_PROVINCE_NAME = '2.5.4.8'; // case-ignore string
{$EXTERNALSYM szOID_STATE_OR_PROVINCE_NAME}
szOID_STREET_ADDRESS = '2.5.4.9'; // case-ignore string
{$EXTERNALSYM szOID_STREET_ADDRESS}
// Organizational attribute types:
szOID_ORGANIZATION_NAME = '2.5.4.10'; // case-ignore string
{$EXTERNALSYM szOID_ORGANIZATION_NAME}
szOID_ORGANIZATIONAL_UNIT_NAME = '2.5.4.11'; // case-ignore string
{$EXTERNALSYM szOID_ORGANIZATIONAL_UNIT_NAME}
szOID_TITLE = '2.5.4.12'; // case-ignore string
{$EXTERNALSYM szOID_TITLE}
// Explanatory attribute types:
szOID_DESCRIPTION = '2.5.4.13'; // case-ignore string
{$EXTERNALSYM szOID_DESCRIPTION}
szOID_SEARCH_GUIDE = '2.5.4.14';
{$EXTERNALSYM szOID_SEARCH_GUIDE}
szOID_BUSINESS_CATEGORY = '2.5.4.15'; // case-ignore string
{$EXTERNALSYM szOID_BUSINESS_CATEGORY}
// Postal addressing attribute types:
szOID_POSTAL_ADDRESS = '2.5.4.16';
{$EXTERNALSYM szOID_POSTAL_ADDRESS}
szOID_POSTAL_CODE = '2.5.4.17'; // case-ignore string
{$EXTERNALSYM szOID_POSTAL_CODE}
szOID_POST_OFFICE_BOX = '2.5.4.18'; // case-ignore string
{$EXTERNALSYM szOID_POST_OFFICE_BOX}
szOID_PHYSICAL_DELIVERY_OFFICE_NAME = '2.5.4.19'; // case-ignore string
{$EXTERNALSYM szOID_PHYSICAL_DELIVERY_OFFICE_NAME}
// Telecommunications addressing attribute types:
szOID_TELEPHONE_NUMBER = '2.5.4.20'; // telephone number
{$EXTERNALSYM szOID_TELEPHONE_NUMBER}
szOID_TELEX_NUMBER = '2.5.4.21';
{$EXTERNALSYM szOID_TELEX_NUMBER}
szOID_TELETEXT_TERMINAL_IDENTIFIER = '2.5.4.22';
{$EXTERNALSYM szOID_TELETEXT_TERMINAL_IDENTIFIER}
szOID_FACSIMILE_TELEPHONE_NUMBER = '2.5.4.23';
{$EXTERNALSYM szOID_FACSIMILE_TELEPHONE_NUMBER}
szOID_X21_ADDRESS = '2.5.4.24'; // numeric string
{$EXTERNALSYM szOID_X21_ADDRESS}
szOID_INTERNATIONAL_ISDN_NUMBER = '2.5.4.25'; // numeric string
{$EXTERNALSYM szOID_INTERNATIONAL_ISDN_NUMBER}
szOID_REGISTERED_ADDRESS = '2.5.4.26';
{$EXTERNALSYM szOID_REGISTERED_ADDRESS}
szOID_DESTINATION_INDICATOR = '2.5.4.27'; // printable string
{$EXTERNALSYM szOID_DESTINATION_INDICATOR}
// Preference attribute types:
szOID_PREFERRED_DELIVERY_METHOD = '2.5.4.28';
{$EXTERNALSYM szOID_PREFERRED_DELIVERY_METHOD}
// OSI application attribute types:
szOID_PRESENTATION_ADDRESS = '2.5.4.29';
{$EXTERNALSYM szOID_PRESENTATION_ADDRESS}
szOID_SUPPORTED_APPLICATION_CONTEXT = '2.5.4.30';
{$EXTERNALSYM szOID_SUPPORTED_APPLICATION_CONTEXT}
// Relational application attribute types:
szOID_MEMBER = '2.5.4.31';
{$EXTERNALSYM szOID_MEMBER}
szOID_OWNER = '2.5.4.32';
{$EXTERNALSYM szOID_OWNER}
szOID_ROLE_OCCUPANT = '2.5.4.33';
{$EXTERNALSYM szOID_ROLE_OCCUPANT}
szOID_SEE_ALSO = '2.5.4.34';
{$EXTERNALSYM szOID_SEE_ALSO}
// Security attribute types:
szOID_USER_PASSWORD = '2.5.4.35';
{$EXTERNALSYM szOID_USER_PASSWORD}
szOID_USER_CERTIFICATE = '2.5.4.36';
{$EXTERNALSYM szOID_USER_CERTIFICATE}
szOID_CA_CERTIFICATE = '2.5.4.37';
{$EXTERNALSYM szOID_CA_CERTIFICATE}
szOID_AUTHORITY_REVOCATION_LIST = '2.5.4.38';
{$EXTERNALSYM szOID_AUTHORITY_REVOCATION_LIST}
szOID_CERTIFICATE_REVOCATION_LIST = '2.5.4.39';
{$EXTERNALSYM szOID_CERTIFICATE_REVOCATION_LIST}
szOID_CROSS_CERTIFICATE_PAIR = '2.5.4.40';
{$EXTERNALSYM szOID_CROSS_CERTIFICATE_PAIR}
// Undocumented attribute types???
//#define szOID_??? "2.5.4.41"
szOID_GIVEN_NAME = '2.5.4.42'; // case-ignore string
{$EXTERNALSYM szOID_GIVEN_NAME}
szOID_INITIALS = '2.5.4.43'; // case-ignore string
{$EXTERNALSYM szOID_INITIALS}
// The DN Qualifier attribute type specifies disambiguating information to add
// to the relative distinguished name of an entry. It is intended to be used
// for entries held in multiple DSAs which would otherwise have the same name,
// and that its value be the same in a given DSA for all entries to which
// the information has been added.
szOID_DN_QUALIFIER = '2.5.4.46';
{$EXTERNALSYM szOID_DN_QUALIFIER}
// Pilot user attribute types:
szOID_DOMAIN_COMPONENT = '0.9.2342.19200300.100.1.25'; // IA5, UTF8 string
{$EXTERNALSYM szOID_DOMAIN_COMPONENT}
// used for PKCS 12 attributes
szOID_PKCS_12_FRIENDLY_NAME_ATTR = '1.2.840.113549.1.9.20';
{$EXTERNALSYM szOID_PKCS_12_FRIENDLY_NAME_ATTR}
szOID_PKCS_12_LOCAL_KEY_ID = '1.2.840.113549.1.9.21';
{$EXTERNALSYM szOID_PKCS_12_LOCAL_KEY_ID}
szOID_PKCS_12_KEY_PROVIDER_NAME_ATTR = '1.3.6.1.4.1.311.17.1';
{$EXTERNALSYM szOID_PKCS_12_KEY_PROVIDER_NAME_ATTR}
szOID_LOCAL_MACHINE_KEYSET = '1.3.6.1.4.1.311.17.2';
{$EXTERNALSYM szOID_LOCAL_MACHINE_KEYSET}
//+-------------------------------------------------------------------------
// Microsoft CERT_RDN attribute Object Identifiers
//--------------------------------------------------------------------------
// Special RDN containing the KEY_ID. Its value type is CERT_RDN_OCTET_STRING.
szOID_KEYID_RDN = '1.3.6.1.4.1.311.10.7.1';
{$EXTERNALSYM szOID_KEYID_RDN}
//+-------------------------------------------------------------------------
// CERT_RDN Attribute Value Types
//
// For RDN_ENCODED_BLOB, the Value's CERT_RDN_VALUE_BLOB is in its encoded
// representation. Otherwise, its an array of bytes.
//
// For all CERT_RDN types, Value.cbData is always the number of bytes, not
// necessarily the number of elements in the string. For instance,
// RDN_UNIVERSAL_STRING is an array of ints (cbData == intCnt * 4) and
// RDN_BMP_STRING is an array of unsigned shorts (cbData == ushortCnt * 2).
//
// A RDN_UTF8_STRING is an array of UNICODE characters (cbData == charCnt *2).
// These UNICODE characters are encoded as UTF8 8 bit characters.
//
// For CertDecodeName, two 0 bytes are always appended to the end of the
// string (ensures a CHAR or WCHAR string is null terminated).
// These added 0 bytes are't included in the BLOB.cbData.
//--------------------------------------------------------------------------
CERT_RDN_ANY_TYPE = 0;
{$EXTERNALSYM CERT_RDN_ANY_TYPE}
CERT_RDN_ENCODED_BLOB = 1;
{$EXTERNALSYM CERT_RDN_ENCODED_BLOB}
CERT_RDN_OCTET_STRING = 2;
{$EXTERNALSYM CERT_RDN_OCTET_STRING}
CERT_RDN_NUMERIC_STRING = 3;
{$EXTERNALSYM CERT_RDN_NUMERIC_STRING}
CERT_RDN_PRINTABLE_STRING = 4;
{$EXTERNALSYM CERT_RDN_PRINTABLE_STRING}
CERT_RDN_TELETEX_STRING = 5;
{$EXTERNALSYM CERT_RDN_TELETEX_STRING}
CERT_RDN_T61_STRING = 5;
{$EXTERNALSYM CERT_RDN_T61_STRING}
CERT_RDN_VIDEOTEX_STRING = 6;
{$EXTERNALSYM CERT_RDN_VIDEOTEX_STRING}
CERT_RDN_IA5_STRING = 7;
{$EXTERNALSYM CERT_RDN_IA5_STRING}
CERT_RDN_GRAPHIC_STRING = 8;
{$EXTERNALSYM CERT_RDN_GRAPHIC_STRING}
CERT_RDN_VISIBLE_STRING = 9;
{$EXTERNALSYM CERT_RDN_VISIBLE_STRING}
CERT_RDN_ISO646_STRING = 9;
{$EXTERNALSYM CERT_RDN_ISO646_STRING}
CERT_RDN_GENERAL_STRING = 10;
{$EXTERNALSYM CERT_RDN_GENERAL_STRING}
CERT_RDN_UNIVERSAL_STRING = 11;
{$EXTERNALSYM CERT_RDN_UNIVERSAL_STRING}
CERT_RDN_INT4_STRING = 11;
{$EXTERNALSYM CERT_RDN_INT4_STRING}
CERT_RDN_BMP_STRING = 12;
{$EXTERNALSYM CERT_RDN_BMP_STRING}
CERT_RDN_UNICODE_STRING = 12;
{$EXTERNALSYM CERT_RDN_UNICODE_STRING}
CERT_RDN_UTF8_STRING = 13;
{$EXTERNALSYM CERT_RDN_UTF8_STRING}
CERT_RDN_TYPE_MASK = $000000FF;
{$EXTERNALSYM CERT_RDN_TYPE_MASK}
CERT_RDN_FLAGS_MASK = DWORD($FF000000);
{$EXTERNALSYM CERT_RDN_FLAGS_MASK}
//+-------------------------------------------------------------------------
// Flags that can be or'ed with the above Value Type when encoding/decoding
//--------------------------------------------------------------------------
// For encoding: when set, CERT_RDN_T61_STRING is selected instead of
// CERT_RDN_UNICODE_STRING if all the unicode characters are <= 0xFF
CERT_RDN_ENABLE_T61_UNICODE_FLAG = DWORD($80000000);
{$EXTERNALSYM CERT_RDN_ENABLE_T61_UNICODE_FLAG}
// For encoding: when set, CERT_RDN_UTF8_STRING is selected instead of
// CERT_RDN_UNICODE_STRING.
CERT_RDN_ENABLE_UTF8_UNICODE_FLAG = $20000000;
{$EXTERNALSYM CERT_RDN_ENABLE_UTF8_UNICODE_FLAG}
// For encoding: when set, the characters aren't checked to see if they
// are valid for the Value Type.
CERT_RDN_DISABLE_CHECK_TYPE_FLAG = $40000000;
{$EXTERNALSYM CERT_RDN_DISABLE_CHECK_TYPE_FLAG}
// For decoding: by default, CERT_RDN_T61_STRING values are initially decoded
// as UTF8. If the UTF8 decoding fails, then, decoded as 8 bit characters.
// Setting this flag skips the initial attempt to decode as UTF8.
CERT_RDN_DISABLE_IE4_UTF8_FLAG = $01000000;
{$EXTERNALSYM CERT_RDN_DISABLE_IE4_UTF8_FLAG}
// Macro to check that the dwValueType is a character string and not an
// encoded blob or octet string
function IS_CERT_RDN_CHAR_STRING(X: DWORD): Boolean;
{$EXTERNALSYM IS_CERT_RDN_CHAR_STRING}
//+-------------------------------------------------------------------------
// A CERT_RDN consists of an array of the above attributes
//--------------------------------------------------------------------------
type
PCERT_RDN = ^CERT_RDN;
{$EXTERNALSYM PCERT_RDN}
_CERT_RDN = record
cRDNAttr: DWORD;
rgRDNAttr: PCERT_RDN_ATTR;
end;
{$EXTERNALSYM _CERT_RDN}
CERT_RDN = _CERT_RDN;
{$EXTERNALSYM CERT_RDN}
TCertRdn = CERT_RDN;
PCertRdn = PCERT_RDN;
//+-------------------------------------------------------------------------
// Information stored in a subject's or issuer's name. The information
// is represented as an array of the above RDNs.
//--------------------------------------------------------------------------
PCERT_NAME_INFO = ^CERT_NAME_INFO;
{$EXTERNALSYM PCERT_NAME_INFO}
_CERT_NAME_INFO = record
cRDN: DWORD;
rgRDN: PCERT_RDN;
end;
{$EXTERNALSYM _CERT_NAME_INFO}
CERT_NAME_INFO = _CERT_NAME_INFO;
{$EXTERNALSYM CERT_NAME_INFO}
TCertNameInfo = CERT_NAME_INFO;
PCertNameInfo = PCERT_NAME_INFO;
//+-------------------------------------------------------------------------
// Name attribute value without the Object Identifier
//
// The interpretation of the Value depends on the dwValueType.
// See above for a list of the types.
//--------------------------------------------------------------------------
PCERT_NAME_VALUE = ^CERT_NAME_VALUE;
{$EXTERNALSYM PCERT_NAME_VALUE}
_CERT_NAME_VALUE = record
dwValueType: DWORD;
Value: CERT_RDN_VALUE_BLOB;
end;
{$EXTERNALSYM _CERT_NAME_VALUE}
CERT_NAME_VALUE = _CERT_NAME_VALUE;
{$EXTERNALSYM CERT_NAME_VALUE}
TCertNameValue = CERT_NAME_VALUE;
PCertNameValue = PCERT_NAME_VALUE;
//+-------------------------------------------------------------------------
// Public Key Info
//
// The PublicKey is the encoded representation of the information as it is
// stored in the bit string
//--------------------------------------------------------------------------
PCERT_PUBLIC_KEY_INFO = ^CERT_PUBLIC_KEY_INFO;
{$EXTERNALSYM PCERT_PUBLIC_KEY_INFO}
_CERT_PUBLIC_KEY_INFO = record
Algorithm: CRYPT_ALGORITHM_IDENTIFIER;
PublicKey: CRYPT_BIT_BLOB;
end;
{$EXTERNALSYM _CERT_PUBLIC_KEY_INFO}
CERT_PUBLIC_KEY_INFO = _CERT_PUBLIC_KEY_INFO;
{$EXTERNALSYM CERT_PUBLIC_KEY_INFO}
TCertPublicKeyInfo = CERT_PUBLIC_KEY_INFO;
PCertPublicKeyInfo = PCERT_PUBLIC_KEY_INFO;
const
CERT_RSA_PUBLIC_KEY_OBJID = szOID_RSA_RSA;
{$EXTERNALSYM CERT_RSA_PUBLIC_KEY_OBJID}
CERT_DEFAULT_OID_PUBLIC_KEY_SIGN = szOID_RSA_RSA;
{$EXTERNALSYM CERT_DEFAULT_OID_PUBLIC_KEY_SIGN}
CERT_DEFAULT_OID_PUBLIC_KEY_XCHG = szOID_RSA_RSA;
{$EXTERNALSYM CERT_DEFAULT_OID_PUBLIC_KEY_XCHG}
//+-------------------------------------------------------------------------
// structure that contains all the information in a PKCS#8 PrivateKeyInfo
//--------------------------------------------------------------------------
type
PCRYPT_PRIVATE_KEY_INFO = ^CRYPT_PRIVATE_KEY_INFO;
{$EXTERNALSYM PCRYPT_PRIVATE_KEY_INFO}
_CRYPT_PRIVATE_KEY_INFO = record
Version: DWORD;
Algorithm: CRYPT_ALGORITHM_IDENTIFIER;
PrivateKey: CRYPT_DER_BLOB;
pAttributes: PCRYPT_ATTRIBUTES;
end;
{$EXTERNALSYM _CRYPT_PRIVATE_KEY_INFO}
CRYPT_PRIVATE_KEY_INFO = _CRYPT_PRIVATE_KEY_INFO;
{$EXTERNALSYM CRYPT_PRIVATE_KEY_INFO}
TCryptPrivateKeyInfo = CRYPT_PRIVATE_KEY_INFO;
PCryptPrivateKeyInfo = PCRYPT_PRIVATE_KEY_INFO;
//+-------------------------------------------------------------------------
// structure that contains all the information in a PKCS#8
// EncryptedPrivateKeyInfo
//--------------------------------------------------------------------------
PCRYPT_ENCRYPTED_PRIVATE_KEY_INFO = ^CRYPT_ENCRYPTED_PRIVATE_KEY_INFO;
{$EXTERNALSYM PCRYPT_ENCRYPTED_PRIVATE_KEY_INFO}
_CRYPT_ENCRYPTED_PRIVATE_KEY_INFO = record
EncryptionAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
EncryptedPrivateKey: CRYPT_DATA_BLOB;
end;
{$EXTERNALSYM _CRYPT_ENCRYPTED_PRIVATE_KEY_INFO}
CRYPT_ENCRYPTED_PRIVATE_KEY_INFO = _CRYPT_ENCRYPTED_PRIVATE_KEY_INFO;
{$EXTERNALSYM CRYPT_ENCRYPTED_PRIVATE_KEY_INFO}
TCryptEncryptedPrivateKeyInfo = CRYPT_ENCRYPTED_PRIVATE_KEY_INFO;
PCryptEncryptedPrivateKeyInfo = PCRYPT_ENCRYPTED_PRIVATE_KEY_INFO;
//+-------------------------------------------------------------------------
// this callback is given when an EncryptedProvateKeyInfo structure is
// encountered during ImportPKCS8. the caller is then expected to decrypt
// the private key and hand back the decrypted contents.
//
// the parameters are:
// Algorithm - the algorithm used to encrypt the PrivateKeyInfo
// EncryptedPrivateKey - the encrypted private key blob
// pClearTextKey - a buffer to receive the clear text
// cbClearTextKey - the number of bytes of the pClearTextKey buffer
// note the if this is zero then this should be
// filled in with the size required to decrypt the
// key into, and pClearTextKey should be ignored
// pVoidDecryptFunc - this is the pVoid that was passed into the call
// and is preserved and passed back as context
//+-------------------------------------------------------------------------
type
PCRYPT_DECRYPT_PRIVATE_KEY_FUNC = function(Algorithm: CRYPT_ALGORITHM_IDENTIFIER;
EncryptedPrivateKey: CRYPT_DATA_BLOB; pbClearTextKey: LPBYTE;
pcbClearTextKey: LPDWORD; pVoidDecryptFunc: LPVOID): BOOL; stdcall;
{$EXTERNALSYM PCRYPT_DECRYPT_PRIVATE_KEY_FUNC}
PCryptDecryptPrivateKeyFunc = PCRYPT_DECRYPT_PRIVATE_KEY_FUNC;
//+-------------------------------------------------------------------------
// this callback is given when creating a PKCS8 EncryptedPrivateKeyInfo.
// The caller is then expected to encrypt the private key and hand back
// the encrypted contents.
//
// the parameters are:
// Algorithm - the algorithm used to encrypt the PrivateKeyInfo
// pClearTextPrivateKey - the cleartext private key to be encrypted
// pbEncryptedKey - the output encrypted private key blob
// cbEncryptedKey - the number of bytes of the pbEncryptedKey buffer
// note the if this is zero then this should be
// filled in with the size required to encrypt the
// key into, and pbEncryptedKey should be ignored
// pVoidEncryptFunc - this is the pVoid that was passed into the call
// and is preserved and passed back as context
//+-------------------------------------------------------------------------
type
PCRYPT_ENCRYPT_PRIVATE_KEY_FUNC = function(pAlgorithm: PCRYPT_ALGORITHM_IDENTIFIER;
pClearTextPrivateKey: PCRYPT_DATA_BLOB; pbEncryptedKey: LPBYTE;
pcbEncryptedKey: LPDWORD; pVoidEncryptFunc: LPVOID): BOOL; stdcall;
{$EXTERNALSYM PCRYPT_ENCRYPT_PRIVATE_KEY_FUNC}
PCryptEncryptPrivateKeyFunc = PCRYPT_ENCRYPT_PRIVATE_KEY_FUNC;
//+-------------------------------------------------------------------------
// this callback is given from the context of a ImportPKCS8 calls. the caller
// is then expected to hand back an HCRYPTPROV to receive the key being imported
//
// the parameters are:
// pPrivateKeyInfo - pointer to a CRYPT_PRIVATE_KEY_INFO structure which
// describes the key being imported
// EncryptedPrivateKey - the encrypted private key blob
// phCryptProv - a pointer to a HCRRYPTPROV to be filled in
// pVoidResolveFunc - this is the pVoidResolveFunc passed in by the caller in the
// CRYPT_PRIVATE_KEY_BLOB_AND_PARAMS struct
//+-------------------------------------------------------------------------
type
PCRYPT_RESOLVE_HCRYPTPROV_FUNC = function(pPrivateKeyInfo: PCRYPT_PRIVATE_KEY_INFO;
phCryptProv: PHCRYPTPROV; pVoidResolveFunc: LPVOID): BOOL; stdcall;
{$EXTERNALSYM PCRYPT_RESOLVE_HCRYPTPROV_FUNC}
PCryptResolveHCryptProvFunc = PCRYPT_RESOLVE_HCRYPTPROV_FUNC;
//+-------------------------------------------------------------------------
// this struct contains a PKCS8 private key and two pointers to callback
// functions, with a corresponding pVoids. the first callback is used to give
// the caller the opportunity to specify where the key is imported to. the callback
// passes the caller the algoroithm OID and key size to use in making the decision.
// the other callback is used to decrypt the private key if the PKCS8 contains an
// EncryptedPrivateKeyInfo. both pVoids are preserved and passed back to the caller
// in the respective callback
//+-------------------------------------------------------------------------
PCRYPT_PKCS8_IMPORT_PARAMS = ^CRYPT_PKCS8_IMPORT_PARAMS;
{$EXTERNALSYM PCRYPT_PKCS8_IMPORT_PARAMS}
_CRYPT_PKCS8_IMPORT_PARAMS = record
PrivateKey: CRYPT_DIGEST_BLOB; // PKCS8 blob
pResolvehCryptProvFunc: PCRYPT_RESOLVE_HCRYPTPROV_FUNC; // optional
pVoidResolveFunc: LPVOID; // optional
pDecryptPrivateKeyFunc: PCRYPT_DECRYPT_PRIVATE_KEY_FUNC;
pVoidDecryptFunc: LPVOID;
end;
{$EXTERNALSYM _CRYPT_PKCS8_IMPORT_PARAMS}
CRYPT_PKCS8_IMPORT_PARAMS = _CRYPT_PKCS8_IMPORT_PARAMS;
{$EXTERNALSYM CRYPT_PKCS8_IMPORT_PARAMS}
TCryptPkcs8ImportParams = CRYPT_PKCS8_IMPORT_PARAMS;
PCryptPkcs8ImportParams = PCRYPT_PKCS8_IMPORT_PARAMS;
CRYPT_PRIVATE_KEY_BLOB_AND_PARAMS = CRYPT_PKCS8_IMPORT_PARAMS;
{$EXTERNALSYM CRYPT_PRIVATE_KEY_BLOB_AND_PARAMS}
PCRYPT_PRIVATE_KEY_BLOB_AND_PARAMS = PCRYPT_PKCS8_IMPORT_PARAMS;
{$EXTERNALSYM PCRYPT_PRIVATE_KEY_BLOB_AND_PARAMS}
//+-------------------------------------------------------------------------
// this struct contains information identifying a private key and a pointer
// to a callback function, with a corresponding pVoid. The callback is used
// to encrypt the private key. If the pEncryptPrivateKeyFunc is NULL, the
// key will not be encrypted and an EncryptedPrivateKeyInfo will not be generated.
// The pVoid is preserved and passed back to the caller in the respective callback
//+-------------------------------------------------------------------------
PCRYPT_PKCS8_EXPORT_PARAMS = ^CRYPT_PKCS8_EXPORT_PARAMS;
{$EXTERNALSYM PCRYPT_PKCS8_EXPORT_PARAMS}
_CRYPT_PKCS8_EXPORT_PARAMS = record
hCryptProv: HCRYPTPROV;
dwKeySpec: DWORD;
pszPrivateKeyObjId: LPSTR;
pEncryptPrivateKeyFunc: PCRYPT_ENCRYPT_PRIVATE_KEY_FUNC;
pVoidEncryptFunc: LPVOID;
end;
{$EXTERNALSYM _CRYPT_PKCS8_EXPORT_PARAMS}
CRYPT_PKCS8_EXPORT_PARAMS = _CRYPT_PKCS8_EXPORT_PARAMS;
{$EXTERNALSYM CRYPT_PKCS8_EXPORT_PARAMS}
TCryptPkcs8ExportParams = CRYPT_PKCS8_EXPORT_PARAMS;
PCryptPkcs8ExportParams = PCRYPT_PKCS8_EXPORT_PARAMS;
//+-------------------------------------------------------------------------
// Information stored in a certificate
//
// The Issuer, Subject, Algorithm, PublicKey and Extension BLOBs are the
// encoded representation of the information.
//--------------------------------------------------------------------------
PCERT_INFO = ^CERT_INFO;
{$EXTERNALSYM PCERT_INFO}
_CERT_INFO = record
dwVersion: DWORD;
SerialNumber: CRYPT_INTEGER_BLOB;
SignatureAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
Issuer: CERT_NAME_BLOB;
NotBefore: FILETIME;
NotAfter: FILETIME;
Subject: CERT_NAME_BLOB;
SubjectPublicKeyInfo: CERT_PUBLIC_KEY_INFO;
IssuerUniqueId: CRYPT_BIT_BLOB;
SubjectUniqueId: CRYPT_BIT_BLOB;
cExtension: DWORD;
rgExtension: PCERT_EXTENSION;
end;
{$EXTERNALSYM _CERT_INFO}
CERT_INFO = _CERT_INFO;
{$EXTERNALSYM CERT_INFO}
TCertInfo = CERT_INFO;
PCertInfo = PCERT_INFO;
//+-------------------------------------------------------------------------
// Certificate versions
//--------------------------------------------------------------------------
const
CERT_V1 = 0;
{$EXTERNALSYM CERT_V1}
CERT_V2 = 1;
{$EXTERNALSYM CERT_V2}
CERT_V3 = 2;
{$EXTERNALSYM CERT_V3}
//+-------------------------------------------------------------------------
// Certificate Information Flags
//--------------------------------------------------------------------------
CERT_INFO_VERSION_FLAG = 1;
{$EXTERNALSYM CERT_INFO_VERSION_FLAG}
CERT_INFO_SERIAL_NUMBER_FLAG = 2;
{$EXTERNALSYM CERT_INFO_SERIAL_NUMBER_FLAG}
CERT_INFO_SIGNATURE_ALGORITHM_FLAG = 3;
{$EXTERNALSYM CERT_INFO_SIGNATURE_ALGORITHM_FLAG}
CERT_INFO_ISSUER_FLAG = 4;
{$EXTERNALSYM CERT_INFO_ISSUER_FLAG}
CERT_INFO_NOT_BEFORE_FLAG = 5;
{$EXTERNALSYM CERT_INFO_NOT_BEFORE_FLAG}
CERT_INFO_NOT_AFTER_FLAG = 6;
{$EXTERNALSYM CERT_INFO_NOT_AFTER_FLAG}
CERT_INFO_SUBJECT_FLAG = 7;
{$EXTERNALSYM CERT_INFO_SUBJECT_FLAG}
CERT_INFO_SUBJECT_PUBLIC_KEY_INFO_FLAG = 8;
{$EXTERNALSYM CERT_INFO_SUBJECT_PUBLIC_KEY_INFO_FLAG}
CERT_INFO_ISSUER_UNIQUE_ID_FLAG = 9;
{$EXTERNALSYM CERT_INFO_ISSUER_UNIQUE_ID_FLAG}
CERT_INFO_SUBJECT_UNIQUE_ID_FLAG = 10;
{$EXTERNALSYM CERT_INFO_SUBJECT_UNIQUE_ID_FLAG}
CERT_INFO_EXTENSION_FLAG = 11;
{$EXTERNALSYM CERT_INFO_EXTENSION_FLAG}
//+-------------------------------------------------------------------------
// An entry in a CRL
//
// The Extension BLOBs are the encoded representation of the information.
//--------------------------------------------------------------------------
type
PCRL_ENTRY = ^CRL_ENTRY;
{$EXTERNALSYM PCRL_ENTRY}
_CRL_ENTRY = record
SerialNumber: CRYPT_INTEGER_BLOB;
RevocationDate: FILETIME;
cExtension: DWORD;
rgExtension: PCERT_EXTENSION;
end;
{$EXTERNALSYM _CRL_ENTRY}
CRL_ENTRY = _CRL_ENTRY;
{$EXTERNALSYM CRL_ENTRY}
TCrlEntry = CRL_ENTRY;
PCrlEntry = PCRL_ENTRY;
//+-------------------------------------------------------------------------
// Information stored in a CRL
//
// The Issuer, Algorithm and Extension BLOBs are the encoded
// representation of the information.
//--------------------------------------------------------------------------
PCRL_INFO = ^CRL_INFO;
{$EXTERNALSYM PCRL_INFO}
_CRL_INFO = record
dwVersion: DWORD;
SignatureAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
Issuer: CERT_NAME_BLOB;
ThisUpdate: FILETIME;
NextUpdate: FILETIME;
cCRLEntry: DWORD;
rgCRLEntry: PCRL_ENTRY;
cExtension: DWORD;
rgExtension: PCERT_EXTENSION;
end;
{$EXTERNALSYM _CRL_INFO}
CRL_INFO = _CRL_INFO;
{$EXTERNALSYM CRL_INFO}
TCrlInfo = CRL_INFO;
PCrlInfo = PCRL_INFO;
//+-------------------------------------------------------------------------
// CRL versions
//--------------------------------------------------------------------------
const
CRL_V1 = 0;
{$EXTERNALSYM CRL_V1}
CRL_V2 = 1;
{$EXTERNALSYM CRL_V2}
//+-------------------------------------------------------------------------
// Information stored in a certificate request
//
// The Subject, Algorithm, PublicKey and Attribute BLOBs are the encoded
// representation of the information.
//--------------------------------------------------------------------------
type
PCERT_REQUEST_INFO = ^CERT_REQUEST_INFO;
{$EXTERNALSYM PCERT_REQUEST_INFO}
_CERT_REQUEST_INFO = record
dwVersion: DWORD;
Subject: CERT_NAME_BLOB;
SubjectPublicKeyInfo: CERT_PUBLIC_KEY_INFO;
cAttribute: DWORD;
rgAttribute: PCRYPT_ATTRIBUTE;
end;
{$EXTERNALSYM _CERT_REQUEST_INFO}
CERT_REQUEST_INFO = _CERT_REQUEST_INFO;
{$EXTERNALSYM CERT_REQUEST_INFO}
TCertRequestInfo = CERT_REQUEST_INFO;
PCertRequestInfo = PCERT_REQUEST_INFO;
//+-------------------------------------------------------------------------
// Certificate Request versions
//--------------------------------------------------------------------------
const
CERT_REQUEST_V1 = 0;
{$EXTERNALSYM CERT_REQUEST_V1}
//+-------------------------------------------------------------------------
// Information stored in Netscape's Keygen request
//--------------------------------------------------------------------------
type
PCERT_KEYGEN_REQUEST_INFO = ^CERT_KEYGEN_REQUEST_INFO;
{$EXTERNALSYM PCERT_KEYGEN_REQUEST_INFO}
_CERT_KEYGEN_REQUEST_INFO = record
dwVersion: DWORD;
SubjectPublicKeyInfo: CERT_PUBLIC_KEY_INFO;
pwszChallengeString: LPWSTR; // encoded as IA5
end;
{$EXTERNALSYM _CERT_KEYGEN_REQUEST_INFO}
CERT_KEYGEN_REQUEST_INFO = _CERT_KEYGEN_REQUEST_INFO;
{$EXTERNALSYM CERT_KEYGEN_REQUEST_INFO}
TCertKeygenRequestInfo = CERT_KEYGEN_REQUEST_INFO;
PCertKeygenRequestInfo = PCERT_KEYGEN_REQUEST_INFO;
const
CERT_KEYGEN_REQUEST_V1 = 0;
{$EXTERNALSYM CERT_KEYGEN_REQUEST_V1}
//+-------------------------------------------------------------------------
// Certificate, CRL, Certificate Request or Keygen Request Signed Content
//
// The "to be signed" encoded content plus its signature. The ToBeSigned
// is the encoded CERT_INFO, CRL_INFO, CERT_REQUEST_INFO or
// CERT_KEYGEN_REQUEST_INFO.
//--------------------------------------------------------------------------
type
PCERT_SIGNED_CONTENT_INFO = ^CERT_SIGNED_CONTENT_INFO;
{$EXTERNALSYM PCERT_SIGNED_CONTENT_INFO}
_CERT_SIGNED_CONTENT_INFO = record
ToBeSigned: CRYPT_DER_BLOB;
SignatureAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
Signature: CRYPT_BIT_BLOB;
end;
{$EXTERNALSYM _CERT_SIGNED_CONTENT_INFO}
CERT_SIGNED_CONTENT_INFO = _CERT_SIGNED_CONTENT_INFO;
{$EXTERNALSYM CERT_SIGNED_CONTENT_INFO}
TCertSignedContentInfo = CERT_SIGNED_CONTENT_INFO;
PCertSignedContentInfo = PCERT_SIGNED_CONTENT_INFO;
//+-------------------------------------------------------------------------
// Certificate Trust List (CTL)
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CTL Usage. Also used for EnhancedKeyUsage extension.
//--------------------------------------------------------------------------
PCTL_USAGE = ^CTL_USAGE;
{$EXTERNALSYM PCTL_USAGE}
_CTL_USAGE = record
cUsageIdentifier: DWORD;
rgpszUsageIdentifier: LPSTR; // array of pszObjId
end;
{$EXTERNALSYM _CTL_USAGE}
CTL_USAGE = _CTL_USAGE;
{$EXTERNALSYM CTL_USAGE}
TCtlUsage = CTL_USAGE;
PCtlUsage = PCTL_USAGE;
CERT_ENHKEY_USAGE = CTL_USAGE;
{$EXTERNALSYM CERT_ENHKEY_USAGE}
PCERT_ENHKEY_USAGE = PCTL_USAGE;
{$EXTERNALSYM PCERT_ENHKEY_USAGE}
//+-------------------------------------------------------------------------
// An entry in a CTL
//--------------------------------------------------------------------------
PCTL_ENTRY = ^CTL_ENTRY;
{$EXTERNALSYM PCTL_ENTRY}
_CTL_ENTRY = record
SubjectIdentifier: CRYPT_DATA_BLOB; // For example, its hash
cAttribute: DWORD;
rgAttribute: PCRYPT_ATTRIBUTE; // OPTIONAL
end;
{$EXTERNALSYM _CTL_ENTRY}
CTL_ENTRY = _CTL_ENTRY;
{$EXTERNALSYM CTL_ENTRY}
TCtlEntry = CTL_ENTRY;
PCtlEntry = PCTL_ENTRY;
//+-------------------------------------------------------------------------
// Information stored in a CTL
//--------------------------------------------------------------------------
PCTL_INFO = ^CTL_INFO;
{$EXTERNALSYM PCTL_INFO}
_CTL_INFO = record
dwVersion: DWORD;
SubjectUsage: CTL_USAGE;
ListIdentifier: CRYPT_DATA_BLOB; // OPTIONAL
SequenceNumber: CRYPT_INTEGER_BLOB; // OPTIONAL
ThisUpdate: FILETIME;
NextUpdate: FILETIME; // OPTIONAL
SubjectAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
cCTLEntry: DWORD;
rgCTLEntry: PCTL_ENTRY; // OPTIONAL
cExtension: DWORD;
rgExtension: PCERT_EXTENSION; // OPTIONAL
end;
{$EXTERNALSYM _CTL_INFO}
CTL_INFO = _CTL_INFO;
{$EXTERNALSYM CTL_INFO}
TCtlInfo = CTL_INFO;
PCtlInfo = PCTL_INFO;
//+-------------------------------------------------------------------------
// CTL versions
//--------------------------------------------------------------------------
const
CTL_V1 = 0;
{$EXTERNALSYM CTL_V1}
//+-------------------------------------------------------------------------
// TimeStamp Request
//
// The pszTimeStamp is the OID for the Time type requested
// The pszContentType is the Content Type OID for the content, usually DATA
// The Content is a un-decoded blob
//--------------------------------------------------------------------------
type
PCRYPT_TIME_STAMP_REQUEST_INFO = ^CRYPT_TIME_STAMP_REQUEST_INFO;
{$EXTERNALSYM PCRYPT_TIME_STAMP_REQUEST_INFO}
_CRYPT_TIME_STAMP_REQUEST_INFO = record
pszTimeStampAlgorithm: LPSTR; // pszObjId
pszContentType: LPSTR; // pszObjId
Content: CRYPT_OBJID_BLOB;
cAttribute: DWORD;
rgAttribute: PCRYPT_ATTRIBUTE;
end;
{$EXTERNALSYM _CRYPT_TIME_STAMP_REQUEST_INFO}
CRYPT_TIME_STAMP_REQUEST_INFO = _CRYPT_TIME_STAMP_REQUEST_INFO;
{$EXTERNALSYM CRYPT_TIME_STAMP_REQUEST_INFO}
TCryptTimeStampRequestInfo = CRYPT_TIME_STAMP_REQUEST_INFO;
PCryptTimeStampRequestInfo = PCRYPT_TIME_STAMP_REQUEST_INFO;
//+-------------------------------------------------------------------------
// Name Value Attribute
//--------------------------------------------------------------------------
PCRYPT_ENROLLMENT_NAME_VALUE_PAIR = ^CRYPT_ENROLLMENT_NAME_VALUE_PAIR;
{$EXTERNALSYM PCRYPT_ENROLLMENT_NAME_VALUE_PAIR}
_CRYPT_ENROLLMENT_NAME_VALUE_PAIR = record
pwszName: LPWSTR;
pwszValue: LPWSTR;
end;
{$EXTERNALSYM _CRYPT_ENROLLMENT_NAME_VALUE_PAIR}
CRYPT_ENROLLMENT_NAME_VALUE_PAIR = _CRYPT_ENROLLMENT_NAME_VALUE_PAIR;
{$EXTERNALSYM CRYPT_ENROLLMENT_NAME_VALUE_PAIR}
TCryptEnrollmentNameValuePair = CRYPT_ENROLLMENT_NAME_VALUE_PAIR;
PCryptEnrollmentNameValuePair = PCRYPT_ENROLLMENT_NAME_VALUE_PAIR;
//+-------------------------------------------------------------------------
// CSP Provider
//--------------------------------------------------------------------------
PCRYPT_CSP_PROVIDER = ^CRYPT_CSP_PROVIDER;
{$EXTERNALSYM PCRYPT_CSP_PROVIDER}
_CRYPT_CSP_PROVIDER = record
dwKeySpec: DWORD;
pwszProviderName: LPWSTR;
Signature: CRYPT_BIT_BLOB;
end;
{$EXTERNALSYM _CRYPT_CSP_PROVIDER}
CRYPT_CSP_PROVIDER = _CRYPT_CSP_PROVIDER;
{$EXTERNALSYM CRYPT_CSP_PROVIDER}
TCryptCspProvider = CRYPT_CSP_PROVIDER;
PCryptCspProvider = PCRYPT_CSP_PROVIDER;
//+-------------------------------------------------------------------------
// Certificate and Message encoding types
//
// The encoding type is a DWORD containing both the certificate and message
// encoding types. The certificate encoding type is stored in the LOWORD.
// The message encoding type is stored in the HIWORD. Some functions or
// structure fields require only one of the encoding types. The following
// naming convention is used to indicate which encoding type(s) are
// required:
// dwEncodingType (both encoding types are required)
// dwMsgAndCertEncodingType (both encoding types are required)
// dwMsgEncodingType (only msg encoding type is required)
// dwCertEncodingType (only cert encoding type is required)
//
// Its always acceptable to specify both.
//--------------------------------------------------------------------------
const
CERT_ENCODING_TYPE_MASK = $0000FFFF;
{$EXTERNALSYM CERT_ENCODING_TYPE_MASK}
CMSG_ENCODING_TYPE_MASK = DWORD($FFFF0000);
{$EXTERNALSYM CMSG_ENCODING_TYPE_MASK}
function GET_CERT_ENCODING_TYPE(X: DWORD): DWORD;
{$EXTERNALSYM GET_CERT_ENCODING_TYPE}
function GET_CMSG_ENCODING_TYPE(X: DWORD): DWORD;
{$EXTERNALSYM GET_CMSG_ENCODING_TYPE}
const
CRYPT_ASN_ENCODING = $00000001;
{$EXTERNALSYM CRYPT_ASN_ENCODING}
CRYPT_NDR_ENCODING = $00000002;
{$EXTERNALSYM CRYPT_NDR_ENCODING}
X509_ASN_ENCODING = $00000001;
{$EXTERNALSYM X509_ASN_ENCODING}
X509_NDR_ENCODING = $00000002;
{$EXTERNALSYM X509_NDR_ENCODING}
PKCS_7_ASN_ENCODING = $00010000;
{$EXTERNALSYM PKCS_7_ASN_ENCODING}
PKCS_7_NDR_ENCODING = $00020000;
{$EXTERNALSYM PKCS_7_NDR_ENCODING}
//+-------------------------------------------------------------------------
// format the specified data structure according to the certificate
// encoding type.
//
// The default behavior of CryptFormatObject is to return single line
// display of the encoded data, that is, each subfield will be concatenated with
// a ", " on one line. If user prefers to display the data in multiple line,
// set the flag CRYPT_FORMAT_STR_MULTI_LINE, that is, each subfield will be displayed
// on a seperate line.
//
// If there is no formatting routine installed or registered
// for the lpszStructType, the hex dump of the encoded BLOB will be returned.
// User can set the flag CRYPT_FORMAT_STR_NO_HEX to disable the hex dump.
//--------------------------------------------------------------------------
function CryptFormatObject(dwCertEncodingType, dwFormatType, dwFormatStrType: DWORD;
pFormatStruct: Pointer; lpszStructType: LPCSTR; pbEncoded: LPBYTE;
cbEncoded: DWORD; pbFormat: Pointer; var pcbFormat: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptFormatObject}
//-------------------------------------------------------------------------
// constants for dwFormatStrType of function CryptFormatObject
//-------------------------------------------------------------------------
const
CRYPT_FORMAT_STR_MULTI_LINE = $0001;
{$EXTERNALSYM CRYPT_FORMAT_STR_MULTI_LINE}
CRYPT_FORMAT_STR_NO_HEX = $0010;
{$EXTERNALSYM CRYPT_FORMAT_STR_NO_HEX}
//-------------------------------------------------------------------------
// constants for dwFormatType of function CryptFormatObject
// when format X509_NAME or X509_UNICODE_NAME
//-------------------------------------------------------------------------
// Just get the simple string
CRYPT_FORMAT_SIMPLE = $0001;
{$EXTERNALSYM CRYPT_FORMAT_SIMPLE}
//Put an attribute name infront of the attribute
//such as "O=Microsoft,DN=xiaohs"
CRYPT_FORMAT_X509 = $0002;
{$EXTERNALSYM CRYPT_FORMAT_X509}
//Put an OID infront of the simple string, such as
//"2.5.4.22=Microsoft,2.5.4.3=xiaohs"
CRYPT_FORMAT_OID = $0004;
{$EXTERNALSYM CRYPT_FORMAT_OID}
//Put a ";" between each RDN. The default is ","
CRYPT_FORMAT_RDN_SEMICOLON = $0100;
{$EXTERNALSYM CRYPT_FORMAT_RDN_SEMICOLON}
//Put a "\n" between each RDN.
CRYPT_FORMAT_RDN_CRLF = $0200;
{$EXTERNALSYM CRYPT_FORMAT_RDN_CRLF}
//Unquote the DN value, which is quoated by default va the following
//rules: if the DN contains leading or trailing
//white space or one of the following characters: ",", "+", "=",
//""", "\n", "<", ">", "#" or ";". The quoting character is ".
//If the DN Value contains a " it is double quoted ("").
CRYPT_FORMAT_RDN_UNQUOTE = $0400;
{$EXTERNALSYM CRYPT_FORMAT_RDN_UNQUOTE}
//reverse the order of the RDNs before converting to the string
CRYPT_FORMAT_RDN_REVERSE = $0800;
{$EXTERNALSYM CRYPT_FORMAT_RDN_REVERSE}
//-------------------------------------------------------------------------
// contants dwFormatType of function CryptFormatObject when format a DN.:
//
// The following three values are defined in the section above:
// CRYPT_FORMAT_SIMPLE: Just a simple string
// such as "Microsoft+xiaohs+NT"
// CRYPT_FORMAT_X509 Put an attribute name infront of the attribute
// such as "O=Microsoft+xiaohs+NT"
//
// CRYPT_FORMAT_OID Put an OID infront of the simple string,
// such as "2.5.4.22=Microsoft+xiaohs+NT"
//
// Additional values are defined as following:
//----------------------------------------------------------------------------
//Put a "," between each value. Default is "+"
CRYPT_FORMAT_COMMA = $1000;
{$EXTERNALSYM CRYPT_FORMAT_COMMA}
//Put a ";" between each value
CRYPT_FORMAT_SEMICOLON = CRYPT_FORMAT_RDN_SEMICOLON;
{$EXTERNALSYM CRYPT_FORMAT_SEMICOLON}
//Put a "\n" between each value
CRYPT_FORMAT_CRLF = CRYPT_FORMAT_RDN_CRLF;
{$EXTERNALSYM CRYPT_FORMAT_CRLF}
//+-------------------------------------------------------------------------
// Encode / decode the specified data structure according to the certificate
// encoding type.
//
// See below for a list of the predefined data structures.
//--------------------------------------------------------------------------
type
PFN_CRYPT_ALLOC = function(cbSize: size_t): LPVOID; stdcall;
{$EXTERNALSYM PFN_CRYPT_ALLOC}
PFN_CRYPT_FREE = procedure(pv: LPVOID); stdcall;
{$EXTERNALSYM PFN_CRYPT_FREE}
PCRYPT_ENCODE_PARA = ^CRYPT_ENCODE_PARA;
{$EXTERNALSYM PCRYPT_ENCODE_PARA}
_CRYPT_ENCODE_PARA = record
cbSize: DWORD;
pfnAlloc: PFN_CRYPT_ALLOC; // OPTIONAL
pfnFree: PFN_CRYPT_FREE; // OPTIONAL
end;
{$EXTERNALSYM _CRYPT_ENCODE_PARA}
CRYPT_ENCODE_PARA = _CRYPT_ENCODE_PARA;
{$EXTERNALSYM CRYPT_ENCODE_PARA}
TCryptEncodePara = CRYPT_ENCODE_PARA;
PCryptEncodePara = PCRYPT_ENCODE_PARA;
function CryptEncodeObjectEx(dwCertEncodingType: DWORD; lpszStructType: LPCSTR;
pvStructInfo: Pointer; dwFlags: DWORD; pEncodePara: PCRYPT_ENCODE_PARA;
pvEncoded: Pointer; var pcbEncoded: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptEncodeObjectEx}
function CryptEncodeObject(dwCertEncodingType: DWORD; lpszStructType: LPCSTR;
pvStructInfo: Pointer; pbEncoded: LPBYTE; var pcbEncoded: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptEncodeObject}
// By default the signature bytes are reversed. The following flag can
// be set to inhibit the byte reversal.
//
// This flag is applicable to
// X509_CERT_TO_BE_SIGNED
const
CRYPT_ENCODE_NO_SIGNATURE_BYTE_REVERSAL_FLAG = $8;
{$EXTERNALSYM CRYPT_ENCODE_NO_SIGNATURE_BYTE_REVERSAL_FLAG}
// When the following flag is set the called encode function allocates
// memory for the encoded bytes. A pointer to the allocated bytes
// is returned in pvEncoded. If pEncodePara or pEncodePara->pfnAlloc is
// NULL, then, LocalAlloc is called for the allocation and LocalFree must
// be called to do the free. Otherwise, pEncodePara->pfnAlloc is called
// for the allocation.
//
// *pcbEncoded is ignored on input and updated with the length of the
// allocated, encoded bytes.
//
// If pfnAlloc is set, then, pfnFree should also be set.
CRYPT_ENCODE_ALLOC_FLAG = $8000;
{$EXTERNALSYM CRYPT_ENCODE_ALLOC_FLAG}
// The following flag is applicable when encoding X509_UNICODE_NAME.
// When set, CERT_RDN_T61_STRING is selected instead of
// CERT_RDN_UNICODE_STRING if all the unicode characters are <= 0xFF
CRYPT_UNICODE_NAME_ENCODE_ENABLE_T61_UNICODE_FLAG = CERT_RDN_ENABLE_T61_UNICODE_FLAG;
{$EXTERNALSYM CRYPT_UNICODE_NAME_ENCODE_ENABLE_T61_UNICODE_FLAG}
// The following flag is applicable when encoding X509_UNICODE_NAME.
// When set, CERT_RDN_UTF8_STRING is selected instead of
// CERT_RDN_UNICODE_STRING.
CRYPT_UNICODE_NAME_ENCODE_ENABLE_UTF8_UNICODE_FLAG = CERT_RDN_ENABLE_UTF8_UNICODE_FLAG;
{$EXTERNALSYM CRYPT_UNICODE_NAME_ENCODE_ENABLE_UTF8_UNICODE_FLAG}
// The following flag is applicable when encoding X509_UNICODE_NAME,
// X509_UNICODE_NAME_VALUE or X509_UNICODE_ANY_STRING.
// When set, the characters aren't checked to see if they
// are valid for the specified Value Type.
CRYPT_UNICODE_NAME_ENCODE_DISABLE_CHECK_TYPE_FLAG = CERT_RDN_DISABLE_CHECK_TYPE_FLAG;
{$EXTERNALSYM CRYPT_UNICODE_NAME_ENCODE_DISABLE_CHECK_TYPE_FLAG}
// The following flag is applicable when encoding the PKCS_SORTED_CTL. This
// flag should be set if the identifier for the TrustedSubjects is a hash,
// such as, MD5 or SHA1.
CRYPT_SORTED_CTL_ENCODE_HASHED_SUBJECT_IDENTIFIER_FLAG = $10000;
{$EXTERNALSYM CRYPT_SORTED_CTL_ENCODE_HASHED_SUBJECT_IDENTIFIER_FLAG}
type
PCRYPT_DECODE_PARA = ^CRYPT_DECODE_PARA;
{$EXTERNALSYM PCRYPT_DECODE_PARA}
_CRYPT_DECODE_PARA = record
cbSize: DWORD;
pfnAlloc: PFN_CRYPT_ALLOC; // OPTIONAL
pfnFree: PFN_CRYPT_FREE; // OPTIONAL
end;
{$EXTERNALSYM _CRYPT_DECODE_PARA}
CRYPT_DECODE_PARA = _CRYPT_DECODE_PARA;
{$EXTERNALSYM CRYPT_DECODE_PARA}
TCryptDecodePara = CRYPT_DECODE_PARA;
PCryptDecodePara = PCRYPT_DECODE_PARA;
function CryptDecodeObjectEx(dwCertEncodingType: DWORD; lpszStructType: LPCSTR;
pbEncoded: Pointer; cbEncoded, dwFlags: DWORD; pDecodePara: PCRYPT_DECODE_PARA;
pvStructInfo: Pointer; var pcbStructInfo: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptDecodeObjectEx}
function CryptDecodeObject(dwCertEncodingType: DWORD; lpszStructType: LPCSTR;
pbEncoded: LPBYTE; cbEncoded, dwFlags: DWORD; pvStructInfo: Pointer;
var pcbStructInfo: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptDecodeObject}
// When the following flag is set the nocopy optimization is enabled.
// This optimization where appropriate, updates the pvStructInfo fields
// to point to content residing within pbEncoded instead of making a copy
// of and appending to pvStructInfo.
//
// Note, when set, pbEncoded can't be freed until pvStructInfo is freed.
const
CRYPT_DECODE_NOCOPY_FLAG = $1;
{$EXTERNALSYM CRYPT_DECODE_NOCOPY_FLAG}
// For CryptDecodeObject(), by default the pbEncoded is the "to be signed"
// plus its signature. Set the following flag, if pbEncoded points to only
// the "to be signed".
//
// This flag is applicable to
// X509_CERT_TO_BE_SIGNED
// X509_CERT_CRL_TO_BE_SIGNED
// X509_CERT_REQUEST_TO_BE_SIGNED
// X509_KEYGEN_REQUEST_TO_BE_SIGNED
CRYPT_DECODE_TO_BE_SIGNED_FLAG = $2;
{$EXTERNALSYM CRYPT_DECODE_TO_BE_SIGNED_FLAG}
// When the following flag is set, the OID strings are allocated in
// crypt32.dll and shared instead of being copied into the returned
// data structure. This flag may be set if crypt32.dll isn't unloaded
// before the caller is unloaded.
CRYPT_DECODE_SHARE_OID_STRING_FLAG = $4;
{$EXTERNALSYM CRYPT_DECODE_SHARE_OID_STRING_FLAG}
// By default the signature bytes are reversed. The following flag can
// be set to inhibit the byte reversal.
//
// This flag is applicable to
// X509_CERT_TO_BE_SIGNED
CRYPT_DECODE_NO_SIGNATURE_BYTE_REVERSAL_FLAG = $8;
{$EXTERNALSYM CRYPT_DECODE_NO_SIGNATURE_BYTE_REVERSAL_FLAG}
// When the following flag is set the called decode function allocates
// memory for the decoded structure. A pointer to the allocated structure
// is returned in pvStructInfo. If pDecodePara or pDecodePara->pfnAlloc is
// NULL, then, LocalAlloc is called for the allocation and LocalFree must
// be called to do the free. Otherwise, pDecodePara->pfnAlloc is called
// for the allocation.
//
// *pcbStructInfo is ignored on input and updated with the length of the
// allocated, decoded structure.
//
// This flag may also be set in the CryptDecodeObject API. Since
// CryptDecodeObject doesn't take a pDecodePara, LocalAlloc is always
// called for the allocation which must be freed by calling LocalFree.
CRYPT_DECODE_ALLOC_FLAG = $8000;
{$EXTERNALSYM CRYPT_DECODE_ALLOC_FLAG}
// The following flag is applicable when decoding X509_UNICODE_NAME,
// X509_UNICODE_NAME_VALUE or X509_UNICODE_ANY_STRING.
// By default, CERT_RDN_T61_STRING values are initially decoded
// as UTF8. If the UTF8 decoding fails, then, decoded as 8 bit characters.
// Setting this flag skips the initial attempt to decode as UTF8.
CRYPT_UNICODE_NAME_DECODE_DISABLE_IE4_UTF8_FLAG = CERT_RDN_DISABLE_IE4_UTF8_FLAG;
{$EXTERNALSYM CRYPT_UNICODE_NAME_DECODE_DISABLE_IE4_UTF8_FLAG}
//+-------------------------------------------------------------------------
// Predefined X509 certificate data structures that can be encoded / decoded.
//--------------------------------------------------------------------------
CRYPT_ENCODE_DECODE_NONE = 0;
{$EXTERNALSYM CRYPT_ENCODE_DECODE_NONE}
X509_CERT = LPCSTR(1);
{$EXTERNALSYM X509_CERT}
X509_CERT_TO_BE_SIGNED = LPCSTR(2);
{$EXTERNALSYM X509_CERT_TO_BE_SIGNED}
X509_CERT_CRL_TO_BE_SIGNED = LPCSTR(3);
{$EXTERNALSYM X509_CERT_CRL_TO_BE_SIGNED}
X509_CERT_REQUEST_TO_BE_SIGNED = LPCSTR(4);
{$EXTERNALSYM X509_CERT_REQUEST_TO_BE_SIGNED}
X509_EXTENSIONS = LPCSTR(5);
{$EXTERNALSYM X509_EXTENSIONS}
X509_NAME_VALUE = LPCSTR(6);
{$EXTERNALSYM X509_NAME_VALUE}
X509_NAME = LPCSTR(7);
{$EXTERNALSYM X509_NAME}
X509_PUBLIC_KEY_INFO = LPCSTR(8);
{$EXTERNALSYM X509_PUBLIC_KEY_INFO}
//+-------------------------------------------------------------------------
// Predefined X509 certificate extension data structures that can be
// encoded / decoded.
//--------------------------------------------------------------------------
X509_AUTHORITY_KEY_ID = LPCSTR(9);
{$EXTERNALSYM X509_AUTHORITY_KEY_ID}
X509_KEY_ATTRIBUTES = LPCSTR(10);
{$EXTERNALSYM X509_KEY_ATTRIBUTES}
X509_KEY_USAGE_RESTRICTION = LPCSTR(11);
{$EXTERNALSYM X509_KEY_USAGE_RESTRICTION}
X509_ALTERNATE_NAME = LPCSTR(12);
{$EXTERNALSYM X509_ALTERNATE_NAME}
X509_BASIC_CONSTRAINTS = LPCSTR(13);
{$EXTERNALSYM X509_BASIC_CONSTRAINTS}
X509_KEY_USAGE = LPCSTR(14);
{$EXTERNALSYM X509_KEY_USAGE}
X509_BASIC_CONSTRAINTS2 = LPCSTR(15);
{$EXTERNALSYM X509_BASIC_CONSTRAINTS2}
X509_CERT_POLICIES = LPCSTR(16);
{$EXTERNALSYM X509_CERT_POLICIES}
//+-------------------------------------------------------------------------
// Additional predefined data structures that can be encoded / decoded.
//--------------------------------------------------------------------------
PKCS_UTC_TIME = LPCSTR(17);
{$EXTERNALSYM PKCS_UTC_TIME}
PKCS_TIME_REQUEST = LPCSTR(18);
{$EXTERNALSYM PKCS_TIME_REQUEST}
RSA_CSP_PUBLICKEYBLOB = LPCSTR(19);
{$EXTERNALSYM RSA_CSP_PUBLICKEYBLOB}
X509_UNICODE_NAME = LPCSTR(20);
{$EXTERNALSYM X509_UNICODE_NAME}
X509_KEYGEN_REQUEST_TO_BE_SIGNED = LPCSTR(21);
{$EXTERNALSYM X509_KEYGEN_REQUEST_TO_BE_SIGNED}
PKCS_ATTRIBUTE = LPCSTR(22);
{$EXTERNALSYM PKCS_ATTRIBUTE}
PKCS_CONTENT_INFO_SEQUENCE_OF_ANY = LPCSTR(23);
{$EXTERNALSYM PKCS_CONTENT_INFO_SEQUENCE_OF_ANY}
//+-------------------------------------------------------------------------
// Predefined primitive data structures that can be encoded / decoded.
//--------------------------------------------------------------------------
X509_UNICODE_NAME_VALUE = LPCSTR(24);
{$EXTERNALSYM X509_UNICODE_NAME_VALUE}
X509_ANY_STRING = X509_NAME_VALUE;
{$EXTERNALSYM X509_ANY_STRING}
X509_UNICODE_ANY_STRING = X509_UNICODE_NAME_VALUE;
{$EXTERNALSYM X509_UNICODE_ANY_STRING}
X509_OCTET_STRING = LPCSTR(25);
{$EXTERNALSYM X509_OCTET_STRING}
X509_BITS = LPCSTR(26);
{$EXTERNALSYM X509_BITS}
X509_INTEGER = LPCSTR(27);
{$EXTERNALSYM X509_INTEGER}
X509_MULTI_BYTE_INTEGER = LPCSTR(28);
{$EXTERNALSYM X509_MULTI_BYTE_INTEGER}
X509_ENUMERATED = LPCSTR(29);
{$EXTERNALSYM X509_ENUMERATED}
X509_CHOICE_OF_TIME = LPCSTR(30);
{$EXTERNALSYM X509_CHOICE_OF_TIME}
//+-------------------------------------------------------------------------
// More predefined X509 certificate extension data structures that can be
// encoded / decoded.
//--------------------------------------------------------------------------
X509_AUTHORITY_KEY_ID2 = LPCSTR(31);
{$EXTERNALSYM X509_AUTHORITY_KEY_ID2}
X509_AUTHORITY_INFO_ACCESS = LPCSTR(32);
{$EXTERNALSYM X509_AUTHORITY_INFO_ACCESS}
X509_CRL_REASON_CODE = X509_ENUMERATED;
{$EXTERNALSYM X509_CRL_REASON_CODE}
PKCS_CONTENT_INFO = LPCSTR(33);
{$EXTERNALSYM PKCS_CONTENT_INFO}
X509_SEQUENCE_OF_ANY = LPCSTR(34);
{$EXTERNALSYM X509_SEQUENCE_OF_ANY}
X509_CRL_DIST_POINTS = LPCSTR(35);
{$EXTERNALSYM X509_CRL_DIST_POINTS}
X509_ENHANCED_KEY_USAGE = LPCSTR(36);
{$EXTERNALSYM X509_ENHANCED_KEY_USAGE}
PKCS_CTL = LPCSTR(37);
{$EXTERNALSYM PKCS_CTL}
X509_MULTI_BYTE_UINT = LPCSTR(38);
{$EXTERNALSYM X509_MULTI_BYTE_UINT}
X509_DSS_PUBLICKEY = X509_MULTI_BYTE_UINT;
{$EXTERNALSYM X509_DSS_PUBLICKEY}
X509_DSS_PARAMETERS = LPCSTR(39);
{$EXTERNALSYM X509_DSS_PARAMETERS}
X509_DSS_SIGNATURE = LPCSTR(40);
{$EXTERNALSYM X509_DSS_SIGNATURE}
PKCS_RC2_CBC_PARAMETERS = LPCSTR(41);
{$EXTERNALSYM PKCS_RC2_CBC_PARAMETERS}
PKCS_SMIME_CAPABILITIES = LPCSTR(42);
{$EXTERNALSYM PKCS_SMIME_CAPABILITIES}
//+-------------------------------------------------------------------------
// data structures for private keys
//--------------------------------------------------------------------------
PKCS_RSA_PRIVATE_KEY = LPCSTR(43);
{$EXTERNALSYM PKCS_RSA_PRIVATE_KEY}
PKCS_PRIVATE_KEY_INFO = LPCSTR(44);
{$EXTERNALSYM PKCS_PRIVATE_KEY_INFO}
PKCS_ENCRYPTED_PRIVATE_KEY_INFO = LPCSTR(45);
{$EXTERNALSYM PKCS_ENCRYPTED_PRIVATE_KEY_INFO}
//+-------------------------------------------------------------------------
// certificate policy qualifier
//--------------------------------------------------------------------------
X509_PKIX_POLICY_QUALIFIER_USERNOTICE = LPCSTR(46);
{$EXTERNALSYM X509_PKIX_POLICY_QUALIFIER_USERNOTICE}
//+-------------------------------------------------------------------------
// Diffie-Hellman Key Exchange
//--------------------------------------------------------------------------
X509_DH_PUBLICKEY = X509_MULTI_BYTE_UINT;
{$EXTERNALSYM X509_DH_PUBLICKEY}
X509_DH_PARAMETERS = LPCSTR(47);
{$EXTERNALSYM X509_DH_PARAMETERS}
PKCS_ATTRIBUTES = LPCSTR(48);
{$EXTERNALSYM PKCS_ATTRIBUTES}
PKCS_SORTED_CTL = LPCSTR(49);
{$EXTERNALSYM PKCS_SORTED_CTL}
//+-------------------------------------------------------------------------
// X942 Diffie-Hellman
//--------------------------------------------------------------------------
X942_DH_PARAMETERS = LPCSTR(50);
{$EXTERNALSYM X942_DH_PARAMETERS}
//+-------------------------------------------------------------------------
// The following is the same as X509_BITS, except before encoding,
// the bit length is decremented to exclude trailing zero bits.
//--------------------------------------------------------------------------
X509_BITS_WITHOUT_TRAILING_ZEROES = LPCSTR(51);
{$EXTERNALSYM X509_BITS_WITHOUT_TRAILING_ZEROES}
//+-------------------------------------------------------------------------
// X942 Diffie-Hellman Other Info
//--------------------------------------------------------------------------
X942_OTHER_INFO = LPCSTR(52);
{$EXTERNALSYM X942_OTHER_INFO}
//+-------------------------------------------------------------------------
// Predefined PKCS #7 data structures that can be encoded / decoded.
//--------------------------------------------------------------------------
PKCS7_SIGNER_INFO = LPCSTR(500);
{$EXTERNALSYM PKCS7_SIGNER_INFO}
//+-------------------------------------------------------------------------
// Predefined PKCS #7 data structures that can be encoded / decoded.
//--------------------------------------------------------------------------
CMS_SIGNER_INFO = LPCSTR(501);
{$EXTERNALSYM CMS_SIGNER_INFO}
//+-------------------------------------------------------------------------
// Predefined Software Publishing Credential (SPC) data structures that
// can be encoded / decoded.
//
// Predefined values: 2000 .. 2999
//
// See spc.h for value and data structure definitions.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// Extension Object Identifiers
//--------------------------------------------------------------------------
szOID_AUTHORITY_KEY_IDENTIFIER = '2.5.29.1';
{$EXTERNALSYM szOID_AUTHORITY_KEY_IDENTIFIER}
szOID_KEY_ATTRIBUTES = '2.5.29.2';
{$EXTERNALSYM szOID_KEY_ATTRIBUTES}
szOID_CERT_POLICIES_95 = '2.5.29.3';
{$EXTERNALSYM szOID_CERT_POLICIES_95}
szOID_KEY_USAGE_RESTRICTION = '2.5.29.4';
{$EXTERNALSYM szOID_KEY_USAGE_RESTRICTION}
szOID_SUBJECT_ALT_NAME = '2.5.29.7';
{$EXTERNALSYM szOID_SUBJECT_ALT_NAME}
szOID_ISSUER_ALT_NAME = '2.5.29.8';
{$EXTERNALSYM szOID_ISSUER_ALT_NAME}
szOID_BASIC_CONSTRAINTS = '2.5.29.10';
{$EXTERNALSYM szOID_BASIC_CONSTRAINTS}
szOID_KEY_USAGE = '2.5.29.15';
{$EXTERNALSYM szOID_KEY_USAGE}
szOID_PRIVATEKEY_USAGE_PERIOD = '2.5.29.16';
{$EXTERNALSYM szOID_PRIVATEKEY_USAGE_PERIOD}
szOID_BASIC_CONSTRAINTS2 = '2.5.29.19';
{$EXTERNALSYM szOID_BASIC_CONSTRAINTS2}
szOID_CERT_POLICIES = '2.5.29.32';
{$EXTERNALSYM szOID_CERT_POLICIES}
szOID_AUTHORITY_KEY_IDENTIFIER2 = '2.5.29.35';
{$EXTERNALSYM szOID_AUTHORITY_KEY_IDENTIFIER2}
szOID_SUBJECT_KEY_IDENTIFIER = '2.5.29.14';
{$EXTERNALSYM szOID_SUBJECT_KEY_IDENTIFIER}
szOID_SUBJECT_ALT_NAME2 = '2.5.29.17';
{$EXTERNALSYM szOID_SUBJECT_ALT_NAME2}
szOID_ISSUER_ALT_NAME2 = '2.5.29.18';
{$EXTERNALSYM szOID_ISSUER_ALT_NAME2}
szOID_CRL_REASON_CODE = '2.5.29.21';
{$EXTERNALSYM szOID_CRL_REASON_CODE}
szOID_CRL_DIST_POINTS = '2.5.29.31';
{$EXTERNALSYM szOID_CRL_DIST_POINTS}
szOID_ENHANCED_KEY_USAGE = '2.5.29.37';
{$EXTERNALSYM szOID_ENHANCED_KEY_USAGE}
// Microsoft PKCS10 Attributes
szOID_RENEWAL_CERTIFICATE = '1.3.6.1.4.1.311.13.1';
{$EXTERNALSYM szOID_RENEWAL_CERTIFICATE}
szOID_ENROLLMENT_NAME_VALUE_PAIR = '1.3.6.1.4.1.311.13.2.1';
{$EXTERNALSYM szOID_ENROLLMENT_NAME_VALUE_PAIR}
szOID_ENROLLMENT_CSP_PROVIDER = '1.3.6.1.4.1.311.13.2.2';
{$EXTERNALSYM szOID_ENROLLMENT_CSP_PROVIDER}
szOID_OS_VERSION = '1.3.6.1.4.1.311.13.2.3';
{$EXTERNALSYM szOID_OS_VERSION}
//
// Extension contain certificate type
szOID_ENROLLMENT_AGENT = '1.3.6.1.4.1.311.20.2.1';
{$EXTERNALSYM szOID_ENROLLMENT_AGENT}
// Internet Public Key Infrastructure (PKIX)
szOID_PKIX = '1.3.6.1.5.5.7';
{$EXTERNALSYM szOID_PKIX}
szOID_PKIX_PE = '1.3.6.1.5.5.7.1';
{$EXTERNALSYM szOID_PKIX_PE}
szOID_AUTHORITY_INFO_ACCESS = '1.3.6.1.5.5.7.1.1';
{$EXTERNALSYM szOID_AUTHORITY_INFO_ACCESS}
// Microsoft extensions or attributes
szOID_CERT_EXTENSIONS = '1.3.6.1.4.1.311.2.1.14';
{$EXTERNALSYM szOID_CERT_EXTENSIONS}
szOID_NEXT_UPDATE_LOCATION = '1.3.6.1.4.1.311.10.2';
{$EXTERNALSYM szOID_NEXT_UPDATE_LOCATION}
// Microsoft PKCS #7 ContentType Object Identifiers
szOID_CTL = '1.3.6.1.4.1.311.10.1';
{$EXTERNALSYM szOID_CTL}
// Microsoft Sorted CTL Extension Object Identifier
szOID_SORTED_CTL = '1.3.6.1.4.1.311.10.1.1';
{$EXTERNALSYM szOID_SORTED_CTL}
// serialized serial numbers for PRS
szOID_SERIALIZED = '1.3.6.1.4.1.311.10.3.3.1';
{$EXTERNALSYM szOID_SERIALIZED}
// UPN principal name in SubjectAltName
szOID_NT_PRINCIPAL_NAME = '1.3.6.1.4.1.311.20.2.3';
{$EXTERNALSYM szOID_NT_PRINCIPAL_NAME}
// Windows product update unauthenticated attribute
szOID_PRODUCT_UPDATE = '1.3.6.1.4.1.311.31.1';
{$EXTERNALSYM szOID_PRODUCT_UPDATE}
//+-------------------------------------------------------------------------
// Object Identifiers for use with Auto Enrollment
//--------------------------------------------------------------------------
szOID_AUTO_ENROLL_CTL_USAGE = '1.3.6.1.4.1.311.20.1';
{$EXTERNALSYM szOID_AUTO_ENROLL_CTL_USAGE}
// Extension contain certificate type
szOID_ENROLL_CERTTYPE_EXTENSION = '1.3.6.1.4.1.311.20.2';
{$EXTERNALSYM szOID_ENROLL_CERTTYPE_EXTENSION}
szOID_CERT_MANIFOLD = '1.3.6.1.4.1.311.20.3';
{$EXTERNALSYM szOID_CERT_MANIFOLD}
//+-------------------------------------------------------------------------
// Object Identifiers for use with the MS Certificate Server
//--------------------------------------------------------------------------
szOID_CERTSRV_CA_VERSION = '1.3.6.1.4.1.311.21.1';
{$EXTERNALSYM szOID_CERTSRV_CA_VERSION}
//+-------------------------------------------------------------------------
// Object Identifiers for use with the MS Directory Service
//--------------------------------------------------------------------------
szOID_NTDS_REPLICATION = '1.3.6.1.4.1.311.25.1';
{$EXTERNALSYM szOID_NTDS_REPLICATION}
//+-------------------------------------------------------------------------
// Extension Object Identifiers (currently not implemented)
//--------------------------------------------------------------------------
szOID_POLICY_MAPPINGS = '2.5.29.5';
{$EXTERNALSYM szOID_POLICY_MAPPINGS}
szOID_SUBJECT_DIR_ATTRS = '2.5.29.9';
{$EXTERNALSYM szOID_SUBJECT_DIR_ATTRS}
//+-------------------------------------------------------------------------
// Enhanced Key Usage (Purpose) Object Identifiers
//--------------------------------------------------------------------------
szOID_PKIX_KP = '1.3.6.1.5.5.7.3';
{$EXTERNALSYM szOID_PKIX_KP}
// Consistent key usage bits: DIGITAL_SIGNATURE, KEY_ENCIPHERMENT
// or KEY_AGREEMENT
szOID_PKIX_KP_SERVER_AUTH = '1.3.6.1.5.5.7.3.1';
{$EXTERNALSYM szOID_PKIX_KP_SERVER_AUTH}
// Consistent key usage bits: DIGITAL_SIGNATURE
szOID_PKIX_KP_CLIENT_AUTH = '1.3.6.1.5.5.7.3.2';
{$EXTERNALSYM szOID_PKIX_KP_CLIENT_AUTH}
// Consistent key usage bits: DIGITAL_SIGNATURE
szOID_PKIX_KP_CODE_SIGNING = '1.3.6.1.5.5.7.3.3';
{$EXTERNALSYM szOID_PKIX_KP_CODE_SIGNING}
// Consistent key usage bits: DIGITAL_SIGNATURE, NON_REPUDIATION and/or
// (KEY_ENCIPHERMENT or KEY_AGREEMENT)
szOID_PKIX_KP_EMAIL_PROTECTION = '1.3.6.1.5.5.7.3.4';
{$EXTERNALSYM szOID_PKIX_KP_EMAIL_PROTECTION}
// Consistent key usage bits: DIGITAL_SIGNATURE and/or
// (KEY_ENCIPHERMENT or KEY_AGREEMENT)
szOID_PKIX_KP_IPSEC_END_SYSTEM = '1.3.6.1.5.5.7.3.5';
{$EXTERNALSYM szOID_PKIX_KP_IPSEC_END_SYSTEM}
// Consistent key usage bits: DIGITAL_SIGNATURE and/or
// (KEY_ENCIPHERMENT or KEY_AGREEMENT)
szOID_PKIX_KP_IPSEC_TUNNEL = '1.3.6.1.5.5.7.3.6';
{$EXTERNALSYM szOID_PKIX_KP_IPSEC_TUNNEL}
// Consistent key usage bits: DIGITAL_SIGNATURE and/or
// (KEY_ENCIPHERMENT or KEY_AGREEMENT)
szOID_PKIX_KP_IPSEC_USER = '1.3.6.1.5.5.7.3.7';
{$EXTERNALSYM szOID_PKIX_KP_IPSEC_USER}
// Consistent key usage bits: DIGITAL_SIGNATURE or NON_REPUDIATION
szOID_PKIX_KP_TIMESTAMP_SIGNING = '1.3.6.1.5.5.7.3.8';
{$EXTERNALSYM szOID_PKIX_KP_TIMESTAMP_SIGNING}
//+-------------------------------------------------------------------------
// Microsoft Enhanced Key Usage (Purpose) Object Identifiers
//+-------------------------------------------------------------------------
// Signer of CTLs
szOID_KP_CTL_USAGE_SIGNING = '1.3.6.1.4.1.311.10.3.1';
{$EXTERNALSYM szOID_KP_CTL_USAGE_SIGNING}
// Signer of TimeStamps
szOID_KP_TIME_STAMP_SIGNING = '1.3.6.1.4.1.311.10.3.2';
{$EXTERNALSYM szOID_KP_TIME_STAMP_SIGNING}
szOID_SERVER_GATED_CRYPTO = '1.3.6.1.4.1.311.10.3.3';
{$EXTERNALSYM szOID_SERVER_GATED_CRYPTO}
szOID_SGC_NETSCAPE = '2.16.840.1.113730.4.1';
{$EXTERNALSYM szOID_SGC_NETSCAPE}
szOID_KP_EFS = '1.3.6.1.4.1.311.10.3.4';
{$EXTERNALSYM szOID_KP_EFS}
// Can use Windows Hardware Compatible (WHQL)
szOID_WHQL_CRYPTO = '1.3.6.1.4.1.311.10.3.5';
{$EXTERNALSYM szOID_WHQL_CRYPTO}
// Signed by the NT5 build lab
szOID_NT5_CRYPTO = '1.3.6.1.4.1.311.10.3.6';
{$EXTERNALSYM szOID_NT5_CRYPTO}
// Signed by and OEM of WHQL
szOID_OEM_WHQL_CRYPTO = '1.3.6.1.4.1.311.10.3.7';
{$EXTERNALSYM szOID_OEM_WHQL_CRYPTO}
// Signed by the Embedded NT
szOID_EMBEDDED_NT_CRYPTO = '1.3.6.1.4.1.311.10.3.8';
{$EXTERNALSYM szOID_EMBEDDED_NT_CRYPTO}
szOID_DRM = '1.3.6.1.4.1.311.10.5.1';
{$EXTERNALSYM szOID_DRM}
szOID_LICENSES = '1.3.6.1.4.1.311.10.6.1';
{$EXTERNALSYM szOID_LICENSES}
szOID_LICENSE_SERVER = '1.3.6.1.4.1.311.10.6.2';
{$EXTERNALSYM szOID_LICENSE_SERVER}
szOID_KP_SMARTCARD_LOGON = '1.3.6.1.4.1.311.20.2.2';
{$EXTERNALSYM szOID_KP_SMARTCARD_LOGON}
//+-------------------------------------------------------------------------
// Microsoft Attribute Object Identifiers
//+-------------------------------------------------------------------------
szOID_YESNO_TRUST_ATTR = '1.3.6.1.4.1.311.10.4.1';
{$EXTERNALSYM szOID_YESNO_TRUST_ATTR}
//+-------------------------------------------------------------------------
// Qualifiers that may be part of the szOID_CERT_POLICIES and
// szOID_CERT_POLICIES95 extensions
//+-------------------------------------------------------------------------
szOID_PKIX_POLICY_QUALIFIER_CPS = '1.3.6.1.5.5.7.2.1';
{$EXTERNALSYM szOID_PKIX_POLICY_QUALIFIER_CPS}
szOID_PKIX_POLICY_QUALIFIER_USERNOTICE = '1.3.6.1.5.5.7.2.2';
{$EXTERNALSYM szOID_PKIX_POLICY_QUALIFIER_USERNOTICE}
// OID for old qualifer
szOID_CERT_POLICIES_95_QUALIFIER1 = '2.16.840.1.113733.1.7.1.1';
{$EXTERNALSYM szOID_CERT_POLICIES_95_QUALIFIER1}
//+-------------------------------------------------------------------------
// X509_CERT
//
// The "to be signed" encoded content plus its signature. The ToBeSigned
// content is the CryptEncodeObject() output for one of the following:
// X509_CERT_TO_BE_SIGNED, X509_CERT_CRL_TO_BE_SIGNED or
// X509_CERT_REQUEST_TO_BE_SIGNED.
//
// pvStructInfo points to CERT_SIGNED_CONTENT_INFO.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// X509_CERT_TO_BE_SIGNED
//
// pvStructInfo points to CERT_INFO.
//
// For CryptDecodeObject(), the pbEncoded is the "to be signed" plus its
// signature (output of a X509_CERT CryptEncodeObject()).
//
// For CryptEncodeObject(), the pbEncoded is just the "to be signed".
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// X509_CERT_CRL_TO_BE_SIGNED
//
// pvStructInfo points to CRL_INFO.
//
// For CryptDecodeObject(), the pbEncoded is the "to be signed" plus its
// signature (output of a X509_CERT CryptEncodeObject()).
//
// For CryptEncodeObject(), the pbEncoded is just the "to be signed".
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// X509_CERT_REQUEST_TO_BE_SIGNED
//
// pvStructInfo points to CERT_REQUEST_INFO.
//
// For CryptDecodeObject(), the pbEncoded is the "to be signed" plus its
// signature (output of a X509_CERT CryptEncodeObject()).
//
// For CryptEncodeObject(), the pbEncoded is just the "to be signed".
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// X509_EXTENSIONS
// szOID_CERT_EXTENSIONS
//
// pvStructInfo points to following CERT_EXTENSIONS.
//--------------------------------------------------------------------------
type
PCERT_EXTENSIONS = ^CERT_EXTENSIONS;
{$EXTERNALSYM PCERT_EXTENSIONS}
_CERT_EXTENSIONS = record
cExtension: DWORD;
rgExtension: PCERT_EXTENSION;
end;
{$EXTERNALSYM _CERT_EXTENSIONS}
CERT_EXTENSIONS = _CERT_EXTENSIONS;
{$EXTERNALSYM CERT_EXTENSIONS}
TCertExtensions = CERT_EXTENSIONS;
PCertExtensions = PCERT_EXTENSIONS;
//+-------------------------------------------------------------------------
// X509_NAME_VALUE
// X509_ANY_STRING
//
// pvStructInfo points to CERT_NAME_VALUE.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// X509_UNICODE_NAME_VALUE
// X509_UNICODE_ANY_STRING
//
// pvStructInfo points to CERT_NAME_VALUE.
//
// The name values are unicode strings.
//
// For CryptEncodeObject:
// Value.pbData points to the unicode string.
// If Value.cbData = 0, then, the unicode string is NULL terminated.
// Otherwise, Value.cbData is the unicode string byte count. The byte count
// is twice the character count.
//
// If the unicode string contains an invalid character for the specified
// dwValueType, then, *pcbEncoded is updated with the unicode character
// index of the first invalid character. LastError is set to:
// CRYPT_E_INVALID_NUMERIC_STRING, CRYPT_E_INVALID_PRINTABLE_STRING or
// CRYPT_E_INVALID_IA5_STRING.
//
// To disable the above check, either set CERT_RDN_DISABLE_CHECK_TYPE_FLAG
// in dwValueType or set CRYPT_UNICODE_NAME_ENCODE_DISABLE_CHECK_TYPE_FLAG
// in dwFlags passed to CryptEncodeObjectEx.
//
// The unicode string is converted before being encoded according to
// the specified dwValueType. If dwValueType is set to 0, LastError
// is set to E_INVALIDARG.
//
// If the dwValueType isn't one of the character strings (its a
// CERT_RDN_ENCODED_BLOB or CERT_RDN_OCTET_STRING), then, CryptEncodeObject
// will return FALSE with LastError set to CRYPT_E_NOT_CHAR_STRING.
//
// For CryptDecodeObject:
// Value.pbData points to a NULL terminated unicode string. Value.cbData
// contains the byte count of the unicode string excluding the NULL
// terminator. dwValueType contains the type used in the encoded object.
// Its not forced to CERT_RDN_UNICODE_STRING. The encoded value is
// converted to the unicode string according to the dwValueType.
//
// If the encoded object isn't one of the character string types, then,
// CryptDecodeObject will return FALSE with LastError set to
// CRYPT_E_NOT_CHAR_STRING. For a non character string, decode using
// X509_NAME_VALUE or X509_ANY_STRING.
//
// By default, CERT_RDN_T61_STRING values are initially decoded
// as UTF8. If the UTF8 decoding fails, then, decoded as 8 bit characters.
// Set CRYPT_UNICODE_NAME_DECODE_DISABLE_IE4_UTF8_FLAG in dwFlags
// passed to either CryptDecodeObject or CryptDecodeObjectEx to
// skip the initial attempt to decode as UTF8.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// X509_NAME
//
// pvStructInfo points to CERT_NAME_INFO.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// X509_UNICODE_NAME
//
// pvStructInfo points to CERT_NAME_INFO.
//
// The RDN attribute values are unicode strings except for the dwValueTypes of
// CERT_RDN_ENCODED_BLOB or CERT_RDN_OCTET_STRING. These dwValueTypes are
// the same as for a X509_NAME. Their values aren't converted to/from unicode.
//
// For CryptEncodeObject:
// Value.pbData points to the unicode string.
// If Value.cbData = 0, then, the unicode string is NULL terminated.
// Otherwise, Value.cbData is the unicode string byte count. The byte count
// is twice the character count.
//
// If dwValueType = 0 (CERT_RDN_ANY_TYPE), the pszObjId is used to find
// an acceptable dwValueType. If the unicode string contains an
// invalid character for the found or specified dwValueType, then,
// *pcbEncoded is updated with the error location of the invalid character.
// See below for details. LastError is set to:
// CRYPT_E_INVALID_NUMERIC_STRING, CRYPT_E_INVALID_PRINTABLE_STRING or
// CRYPT_E_INVALID_IA5_STRING.
//
// To disable the above check, either set CERT_RDN_DISABLE_CHECK_TYPE_FLAG
// in dwValueType or set CRYPT_UNICODE_NAME_ENCODE_DISABLE_CHECK_TYPE_FLAG
// in dwFlags passed to CryptEncodeObjectEx.
//
// Set CERT_RDN_UNICODE_STRING in dwValueType or set
// CRYPT_UNICODE_NAME_ENCODE_ENABLE_T61_UNICODE_FLAG in dwFlags passed
// to CryptEncodeObjectEx to select CERT_RDN_T61_STRING instead of
// CERT_RDN_UNICODE_STRING if all the unicode characters are <= 0xFF.
//
// Set CERT_RDN_ENABLE_UTF8_UNICODE_STRING in dwValueType or set
// CRYPT_UNICODE_NAME_ENCODE_ENABLE_UTF8_UNICODE_FLAG in dwFlags passed
// to CryptEncodeObjectEx to select CERT_RDN_UTF8_STRING instead of
// CERT_RDN_UNICODE_STRING.
//
// The unicode string is converted before being encoded according to
// the specified or ObjId matching dwValueType.
//
// For CryptDecodeObject:
// Value.pbData points to a NULL terminated unicode string. Value.cbData
// contains the byte count of the unicode string excluding the NULL
// terminator. dwValueType contains the type used in the encoded object.
// Its not forced to CERT_RDN_UNICODE_STRING. The encoded value is
// converted to the unicode string according to the dwValueType.
//
// If the dwValueType of the encoded value isn't a character string
// type, then, it isn't converted to UNICODE. Use the
// IS_CERT_RDN_CHAR_STRING() macro on the dwValueType to check
// that Value.pbData points to a converted unicode string.
//
// By default, CERT_RDN_T61_STRING values are initially decoded
// as UTF8. If the UTF8 decoding fails, then, decoded as 8 bit characters.
// Set CRYPT_UNICODE_NAME_DECODE_DISABLE_IE4_UTF8_FLAG in dwFlags
// passed to either CryptDecodeObject or CryptDecodeObjectEx to
// skip the initial attempt to decode as UTF8.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// Unicode Name Value Error Location Definitions
//
// Error location is returned in *pcbEncoded by
// CryptEncodeObject(X509_UNICODE_NAME)
//
// Error location consists of:
// RDN_INDEX - 10 bits << 22
// ATTR_INDEX - 6 bits << 16
// VALUE_INDEX - 16 bits (unicode character index)
//--------------------------------------------------------------------------
const
CERT_UNICODE_RDN_ERR_INDEX_MASK = $3FF;
{$EXTERNALSYM CERT_UNICODE_RDN_ERR_INDEX_MASK}
CERT_UNICODE_RDN_ERR_INDEX_SHIFT = 22;
{$EXTERNALSYM CERT_UNICODE_RDN_ERR_INDEX_SHIFT}
CERT_UNICODE_ATTR_ERR_INDEX_MASK = $003F;
{$EXTERNALSYM CERT_UNICODE_ATTR_ERR_INDEX_MASK}
CERT_UNICODE_ATTR_ERR_INDEX_SHIFT = 16;
{$EXTERNALSYM CERT_UNICODE_ATTR_ERR_INDEX_SHIFT}
CERT_UNICODE_VALUE_ERR_INDEX_MASK = $0000FFFF;
{$EXTERNALSYM CERT_UNICODE_VALUE_ERR_INDEX_MASK}
CERT_UNICODE_VALUE_ERR_INDEX_SHIFT = 0;
{$EXTERNALSYM CERT_UNICODE_VALUE_ERR_INDEX_SHIFT}
function GET_CERT_UNICODE_RDN_ERR_INDEX(X: DWORD): DWORD;
{$EXTERNALSYM GET_CERT_UNICODE_RDN_ERR_INDEX}
function GET_CERT_UNICODE_ATTR_ERR_INDEX(X: DWORD): DWORD;
{$EXTERNALSYM GET_CERT_UNICODE_ATTR_ERR_INDEX}
function GET_CERT_UNICODE_VALUE_ERR_INDEX(X: DWORD): DWORD;
{$EXTERNALSYM GET_CERT_UNICODE_VALUE_ERR_INDEX}
//+-------------------------------------------------------------------------
// X509_PUBLIC_KEY_INFO
//
// pvStructInfo points to CERT_PUBLIC_KEY_INFO.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// X509_AUTHORITY_KEY_ID
// szOID_AUTHORITY_KEY_IDENTIFIER
//
// pvStructInfo points to following CERT_AUTHORITY_KEY_ID_INFO.
//--------------------------------------------------------------------------
type
PCERT_AUTHORITY_KEY_ID_INFO = ^CERT_AUTHORITY_KEY_ID_INFO;
{$EXTERNALSYM PCERT_AUTHORITY_KEY_ID_INFO}
_CERT_AUTHORITY_KEY_ID_INFO = record
KeyId: CRYPT_DATA_BLOB;
CertIssuer: CERT_NAME_BLOB;
CertSerialNumber: CRYPT_INTEGER_BLOB;
end;
{$EXTERNALSYM _CERT_AUTHORITY_KEY_ID_INFO}
CERT_AUTHORITY_KEY_ID_INFO = _CERT_AUTHORITY_KEY_ID_INFO;
{$EXTERNALSYM CERT_AUTHORITY_KEY_ID_INFO}
TCertAuthorityKeyIdInfo = CERT_AUTHORITY_KEY_ID_INFO;
PCertAuthorityKeyIdInfo = PCERT_AUTHORITY_KEY_ID_INFO;
//+-------------------------------------------------------------------------
// X509_KEY_ATTRIBUTES
// szOID_KEY_ATTRIBUTES
//
// pvStructInfo points to following CERT_KEY_ATTRIBUTES_INFO.
//--------------------------------------------------------------------------
PCERT_PRIVATE_KEY_VALIDITY = ^CERT_PRIVATE_KEY_VALIDITY;
{$EXTERNALSYM PCERT_PRIVATE_KEY_VALIDITY}
_CERT_PRIVATE_KEY_VALIDITY = record
NotBefore: FILETIME;
NotAfter: FILETIME;
end;
{$EXTERNALSYM _CERT_PRIVATE_KEY_VALIDITY}
CERT_PRIVATE_KEY_VALIDITY = _CERT_PRIVATE_KEY_VALIDITY;
{$EXTERNALSYM CERT_PRIVATE_KEY_VALIDITY}
TCertPrivateKeyValidity = CERT_PRIVATE_KEY_VALIDITY;
PCertPrivateKeyValidity = PCERT_PRIVATE_KEY_VALIDITY;
PCERT_KEY_ATTRIBUTES_INFO = ^CERT_KEY_ATTRIBUTES_INFO;
{$EXTERNALSYM PCERT_KEY_ATTRIBUTES_INFO}
_CERT_KEY_ATTRIBUTES_INFO = record
KeyId: CRYPT_DATA_BLOB;
IntendedKeyUsage: CRYPT_BIT_BLOB;
pPrivateKeyUsagePeriod: PCERT_PRIVATE_KEY_VALIDITY; // OPTIONAL
end;
{$EXTERNALSYM _CERT_KEY_ATTRIBUTES_INFO}
CERT_KEY_ATTRIBUTES_INFO = _CERT_KEY_ATTRIBUTES_INFO;
{$EXTERNALSYM CERT_KEY_ATTRIBUTES_INFO}
TCertKeyAttributesInfo = CERT_KEY_ATTRIBUTES_INFO;
PCertKeyAttributesInfo = PCERT_KEY_ATTRIBUTES_INFO;
// Byte[0]
const
CERT_DIGITAL_SIGNATURE_KEY_USAGE = $80;
{$EXTERNALSYM CERT_DIGITAL_SIGNATURE_KEY_USAGE}
CERT_NON_REPUDIATION_KEY_USAGE = $40;
{$EXTERNALSYM CERT_NON_REPUDIATION_KEY_USAGE}
CERT_KEY_ENCIPHERMENT_KEY_USAGE = $20;
{$EXTERNALSYM CERT_KEY_ENCIPHERMENT_KEY_USAGE}
CERT_DATA_ENCIPHERMENT_KEY_USAGE = $10;
{$EXTERNALSYM CERT_DATA_ENCIPHERMENT_KEY_USAGE}
CERT_KEY_AGREEMENT_KEY_USAGE = $08;
{$EXTERNALSYM CERT_KEY_AGREEMENT_KEY_USAGE}
CERT_KEY_CERT_SIGN_KEY_USAGE = $04;
{$EXTERNALSYM CERT_KEY_CERT_SIGN_KEY_USAGE}
CERT_OFFLINE_CRL_SIGN_KEY_USAGE = $02;
{$EXTERNALSYM CERT_OFFLINE_CRL_SIGN_KEY_USAGE}
CERT_CRL_SIGN_KEY_USAGE = $02;
{$EXTERNALSYM CERT_CRL_SIGN_KEY_USAGE}
CERT_ENCIPHER_ONLY_KEY_USAGE = $01;
{$EXTERNALSYM CERT_ENCIPHER_ONLY_KEY_USAGE}
// Byte[1]
CERT_DECIPHER_ONLY_KEY_USAGE = $80;
{$EXTERNALSYM CERT_DECIPHER_ONLY_KEY_USAGE}
//+-------------------------------------------------------------------------
// X509_KEY_USAGE_RESTRICTION
// szOID_KEY_USAGE_RESTRICTION
//
// pvStructInfo points to following CERT_KEY_USAGE_RESTRICTION_INFO.
//--------------------------------------------------------------------------
type
PCERT_POLICY_ID = ^CERT_POLICY_ID;
{$EXTERNALSYM PCERT_POLICY_ID}
_CERT_POLICY_ID = record
cCertPolicyElementId: DWORD;
rgpszCertPolicyElementId: LPSTR; // pszObjId
end;
{$EXTERNALSYM _CERT_POLICY_ID}
CERT_POLICY_ID = _CERT_POLICY_ID;
{$EXTERNALSYM CERT_POLICY_ID}
TCertPolicyId = CERT_POLICY_ID;
PCertPolicyId = PCERT_POLICY_ID;
PCERT_KEY_USAGE_RESTRICTION_INFO = ^CERT_KEY_USAGE_RESTRICTION_INFO;
{$EXTERNALSYM PCERT_KEY_USAGE_RESTRICTION_INFO}
_CERT_KEY_USAGE_RESTRICTION_INFO = record
cCertPolicyId: DWORD;
rgCertPolicyId: PCERT_POLICY_ID;
RestrictedKeyUsage: CRYPT_BIT_BLOB;
end;
{$EXTERNALSYM _CERT_KEY_USAGE_RESTRICTION_INFO}
CERT_KEY_USAGE_RESTRICTION_INFO = _CERT_KEY_USAGE_RESTRICTION_INFO;
{$EXTERNALSYM CERT_KEY_USAGE_RESTRICTION_INFO}
TCertKeyUsageRestrictionInfo = CERT_KEY_USAGE_RESTRICTION_INFO;
PCertKeyUsageRestrictionInfo = PCERT_KEY_USAGE_RESTRICTION_INFO;
// See CERT_KEY_ATTRIBUTES_INFO for definition of the RestrictedKeyUsage bits
//+-------------------------------------------------------------------------
// X509_ALTERNATE_NAME
// szOID_SUBJECT_ALT_NAME
// szOID_ISSUER_ALT_NAME
// szOID_SUBJECT_ALT_NAME2
// szOID_ISSUER_ALT_NAME2
//
// pvStructInfo points to following CERT_ALT_NAME_INFO.
//--------------------------------------------------------------------------
PCERT_OTHER_NAME = ^CERT_OTHER_NAME;
{$EXTERNALSYM PCERT_OTHER_NAME}
_CERT_OTHER_NAME = record
pszObjId: LPSTR;
Value: CRYPT_OBJID_BLOB;
end;
{$EXTERNALSYM _CERT_OTHER_NAME}
CERT_OTHER_NAME = _CERT_OTHER_NAME;
{$EXTERNALSYM CERT_OTHER_NAME}
TCertOtherName = CERT_OTHER_NAME;
PCertOtherName = PCERT_OTHER_NAME;
PCERT_ALT_NAME_ENTRY = ^CERT_ALT_NAME_ENTRY;
{$EXTERNALSYM PCERT_ALT_NAME_ENTRY}
_CERT_ALT_NAME_ENTRY = record
dwAltNameChoice: DWORD;
//union {
case Integer of
0: (pOtherName: PCERT_OTHER_NAME); // 1
1: (pwszRfc822Name: LPWSTR); // 2 (encoded IA5)
2: (pwszDNSName: LPWSTR); // 3 (encoded IA5)
3: ();// Not implemented x400Address; // 4
4: (DirectoryName: CERT_NAME_BLOB); // 5
5: ();// Not implemented pEdiPartyName; // 6
6: (pwszURL: LPWSTR); // 7 (encoded IA5)
7: (IPAddress: CRYPT_DATA_BLOB); // 8 (Octet String)
8: (pszRegisteredID: LPSTR); // 9 (Object Identifer)
end;
{$EXTERNALSYM _CERT_ALT_NAME_ENTRY}
CERT_ALT_NAME_ENTRY = _CERT_ALT_NAME_ENTRY;
{$EXTERNALSYM CERT_ALT_NAME_ENTRY}
TCertAltNameEntry = CERT_ALT_NAME_ENTRY;
PCertAltNameEntry = PCERT_ALT_NAME_ENTRY;
const
CERT_ALT_NAME_OTHER_NAME = 1;
{$EXTERNALSYM CERT_ALT_NAME_OTHER_NAME}
CERT_ALT_NAME_RFC822_NAME = 2;
{$EXTERNALSYM CERT_ALT_NAME_RFC822_NAME}
CERT_ALT_NAME_DNS_NAME = 3;
{$EXTERNALSYM CERT_ALT_NAME_DNS_NAME}
CERT_ALT_NAME_X400_ADDRESS = 4;
{$EXTERNALSYM CERT_ALT_NAME_X400_ADDRESS}
CERT_ALT_NAME_DIRECTORY_NAME = 5;
{$EXTERNALSYM CERT_ALT_NAME_DIRECTORY_NAME}
CERT_ALT_NAME_EDI_PARTY_NAME = 6;
{$EXTERNALSYM CERT_ALT_NAME_EDI_PARTY_NAME}
CERT_ALT_NAME_URL = 7;
{$EXTERNALSYM CERT_ALT_NAME_URL}
CERT_ALT_NAME_IP_ADDRESS = 8;
{$EXTERNALSYM CERT_ALT_NAME_IP_ADDRESS}
CERT_ALT_NAME_REGISTERED_ID = 9;
{$EXTERNALSYM CERT_ALT_NAME_REGISTERED_ID}
type
PCERT_ALT_NAME_INFO = ^CERT_ALT_NAME_INFO;
{$EXTERNALSYM PCERT_ALT_NAME_INFO}
_CERT_ALT_NAME_INFO = record
cAltEntry: DWORD;
rgAltEntry: PCERT_ALT_NAME_ENTRY;
end;
{$EXTERNALSYM _CERT_ALT_NAME_INFO}
CERT_ALT_NAME_INFO = _CERT_ALT_NAME_INFO;
{$EXTERNALSYM CERT_ALT_NAME_INFO}
TCertAltNameInfo = CERT_ALT_NAME_INFO;
PCertAltNameInfo = PCERT_ALT_NAME_INFO;
//+-------------------------------------------------------------------------
// Alternate name IA5 Error Location Definitions for
// CRYPT_E_INVALID_IA5_STRING.
//
// Error location is returned in *pcbEncoded by
// CryptEncodeObject(X509_ALTERNATE_NAME)
//
// Error location consists of:
// ENTRY_INDEX - 8 bits << 16
// VALUE_INDEX - 16 bits (unicode character index)
//--------------------------------------------------------------------------
const
CERT_ALT_NAME_ENTRY_ERR_INDEX_MASK = $FF;
{$EXTERNALSYM CERT_ALT_NAME_ENTRY_ERR_INDEX_MASK}
CERT_ALT_NAME_ENTRY_ERR_INDEX_SHIFT = 16;
{$EXTERNALSYM CERT_ALT_NAME_ENTRY_ERR_INDEX_SHIFT}
CERT_ALT_NAME_VALUE_ERR_INDEX_MASK = $0000FFFF;
{$EXTERNALSYM CERT_ALT_NAME_VALUE_ERR_INDEX_MASK}
CERT_ALT_NAME_VALUE_ERR_INDEX_SHIFT = 0;
{$EXTERNALSYM CERT_ALT_NAME_VALUE_ERR_INDEX_SHIFT}
function GET_CERT_ALT_NAME_ENTRY_ERR_INDEX(X: DWORD): DWORD;
{$EXTERNALSYM GET_CERT_ALT_NAME_ENTRY_ERR_INDEX}
function GET_CERT_ALT_NAME_VALUE_ERR_INDEX(X: DWORD): DWORD;
{$EXTERNALSYM GET_CERT_ALT_NAME_VALUE_ERR_INDEX}
//+-------------------------------------------------------------------------
// X509_BASIC_CONSTRAINTS
// szOID_BASIC_CONSTRAINTS
//
// pvStructInfo points to following CERT_BASIC_CONSTRAINTS_INFO.
//--------------------------------------------------------------------------
type
PCERT_BASIC_CONSTRAINTS_INFO = ^CERT_BASIC_CONSTRAINTS_INFO;
{$EXTERNALSYM PCERT_BASIC_CONSTRAINTS_INFO}
_CERT_BASIC_CONSTRAINTS_INFO = record
SubjectType: CRYPT_BIT_BLOB;
fPathLenConstraint: BOOL;
dwPathLenConstraint: DWORD;
cSubtreesConstraint: DWORD;
rgSubtreesConstraint: PCERT_NAME_BLOB;
end;
{$EXTERNALSYM _CERT_BASIC_CONSTRAINTS_INFO}
CERT_BASIC_CONSTRAINTS_INFO = _CERT_BASIC_CONSTRAINTS_INFO;
{$EXTERNALSYM CERT_BASIC_CONSTRAINTS_INFO}
TCertBasicConstraintsInfo = CERT_BASIC_CONSTRAINTS_INFO;
PCertBasicConstraintsInfo = PCERT_BASIC_CONSTRAINTS_INFO;
const
CERT_CA_SUBJECT_FLAG = $80;
{$EXTERNALSYM CERT_CA_SUBJECT_FLAG}
CERT_END_ENTITY_SUBJECT_FLAG = $40;
{$EXTERNALSYM CERT_END_ENTITY_SUBJECT_FLAG}
//+-------------------------------------------------------------------------
// X509_BASIC_CONSTRAINTS2
// szOID_BASIC_CONSTRAINTS2
//
// pvStructInfo points to following CERT_BASIC_CONSTRAINTS2_INFO.
//--------------------------------------------------------------------------
type
PCERT_BASIC_CONSTRAINTS2_INFO = ^CERT_BASIC_CONSTRAINTS2_INFO;
{$EXTERNALSYM PCERT_BASIC_CONSTRAINTS2_INFO}
_CERT_BASIC_CONSTRAINTS2_INFO = record
fCA: BOOL;
fPathLenConstraint: BOOL;
dwPathLenConstraint: DWORD;
end;
{$EXTERNALSYM _CERT_BASIC_CONSTRAINTS2_INFO}
CERT_BASIC_CONSTRAINTS2_INFO = _CERT_BASIC_CONSTRAINTS2_INFO;
{$EXTERNALSYM CERT_BASIC_CONSTRAINTS2_INFO}
TCertBasicConstraints2Info = CERT_BASIC_CONSTRAINTS2_INFO;
PCertBasicConstraints2Info = PCERT_BASIC_CONSTRAINTS2_INFO;
//+-------------------------------------------------------------------------
// X509_KEY_USAGE
// szOID_KEY_USAGE
//
// pvStructInfo points to a CRYPT_BIT_BLOB. Has same bit definitions as
// CERT_KEY_ATTRIBUTES_INFO's IntendedKeyUsage.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// X509_CERT_POLICIES
// szOID_CERT_POLICIES
// szOID_CERT_POLICIES_95 NOTE--Only allowed for decoding!!!
//
// pvStructInfo points to following CERT_POLICIES_INFO.
//
// NOTE: when decoding using szOID_CERT_POLICIES_95 the pszPolicyIdentifier
// may contain an empty string
//--------------------------------------------------------------------------
PCERT_POLICY_QUALIFIER_INFO = ^CERT_POLICY_QUALIFIER_INFO;
{$EXTERNALSYM PCERT_POLICY_QUALIFIER_INFO}
_CERT_POLICY_QUALIFIER_INFO = record
pszPolicyQualifierId: LPSTR; // pszObjId
Qualifier: CRYPT_OBJID_BLOB; // optional
end;
{$EXTERNALSYM _CERT_POLICY_QUALIFIER_INFO}
CERT_POLICY_QUALIFIER_INFO = _CERT_POLICY_QUALIFIER_INFO;
{$EXTERNALSYM CERT_POLICY_QUALIFIER_INFO}
TCertPolicyQualifierInfo = CERT_POLICY_QUALIFIER_INFO;
PCertPolicyQualifierInfo = PCERT_POLICY_QUALIFIER_INFO;
PCERT_POLICY_INFO = ^CERT_POLICY_INFO;
{$EXTERNALSYM PCERT_POLICY_INFO}
_CERT_POLICY_INFO = record
pszPolicyIdentifier: LPSTR; // pszObjId
cPolicyQualifier: DWORD; // optional
rgPolicyQualifier: PCERT_POLICY_QUALIFIER_INFO;
end;
{$EXTERNALSYM _CERT_POLICY_INFO}
CERT_POLICY_INFO = _CERT_POLICY_INFO;
{$EXTERNALSYM CERT_POLICY_INFO}
TCertPolicyInfo = CERT_POLICY_INFO;
PCertPolicyInfo = PCERT_POLICY_INFO;
PCERT_POLICIES_INFO = ^CERT_POLICIES_INFO;
{$EXTERNALSYM PCERT_POLICIES_INFO}
_CERT_POLICIES_INFO = record
cPolicyInfo: DWORD;
rgPolicyInfo: PCERT_POLICY_INFO;
end;
{$EXTERNALSYM _CERT_POLICIES_INFO}
CERT_POLICIES_INFO = _CERT_POLICIES_INFO;
{$EXTERNALSYM CERT_POLICIES_INFO}
TCertPoliciesInfo = CERT_POLICIES_INFO;
PCertPoliciesInfo = PCERT_POLICIES_INFO;
//+-------------------------------------------------------------------------
// X509_PKIX_POLICY_QUALIFIER_USERNOTICE
// szOID_PKIX_POLICY_QUALIFIER_USERNOTICE
//
// pvStructInfo points to following CERT_POLICY_QUALIFIER_USER_NOTICE.
//
//--------------------------------------------------------------------------
PCERT_POLICY_QUALIFIER_NOTICE_REFERENCE = ^CERT_POLICY_QUALIFIER_NOTICE_REFERENCE;
{$EXTERNALSYM PCERT_POLICY_QUALIFIER_NOTICE_REFERENCE}
_CERT_POLICY_QUALIFIER_NOTICE_REFERENCE = record
pszOrganization: LPSTR;
cNoticeNumbers: DWORD;
rgNoticeNumbers: LPINT;
end;
{$EXTERNALSYM _CERT_POLICY_QUALIFIER_NOTICE_REFERENCE}
CERT_POLICY_QUALIFIER_NOTICE_REFERENCE = _CERT_POLICY_QUALIFIER_NOTICE_REFERENCE;
{$EXTERNALSYM CERT_POLICY_QUALIFIER_NOTICE_REFERENCE}
TCertPolicyQualifierNoticeReference = CERT_POLICY_QUALIFIER_NOTICE_REFERENCE;
PCertPolicyQualifierNoticeReference = PCERT_POLICY_QUALIFIER_NOTICE_REFERENCE;
PCERT_POLICY_QUALIFIER_USER_NOTICE = ^CERT_POLICY_QUALIFIER_USER_NOTICE;
{$EXTERNALSYM PCERT_POLICY_QUALIFIER_USER_NOTICE}
_CERT_POLICY_QUALIFIER_USER_NOTICE = record
pNoticeReference: PCERT_POLICY_QUALIFIER_NOTICE_REFERENCE; // optional
pszDisplayText: LPWSTR; // optional
end;
{$EXTERNALSYM _CERT_POLICY_QUALIFIER_USER_NOTICE}
CERT_POLICY_QUALIFIER_USER_NOTICE = _CERT_POLICY_QUALIFIER_USER_NOTICE;
{$EXTERNALSYM CERT_POLICY_QUALIFIER_USER_NOTICE}
TCertPolicyQualifierUserNotice = CERT_POLICY_QUALIFIER_USER_NOTICE;
PCertPolicyQualifierUserNotice = PCERT_POLICY_QUALIFIER_USER_NOTICE;
//+-------------------------------------------------------------------------
// szOID_CERT_POLICIES_95_QUALIFIER1 - Decode Only!!!!
//
// pvStructInfo points to following CERT_POLICY95_QUALIFIER1.
//
//--------------------------------------------------------------------------
PCPS_URLS = ^CPS_URLS;
{$EXTERNALSYM PCPS_URLS}
_CPS_URLS = record
pszURL: LPWSTR;
pAlgorithm: PCRYPT_ALGORITHM_IDENTIFIER; // optional
pDigest: PCRYPT_DATA_BLOB; // optional
end;
{$EXTERNALSYM _CPS_URLS}
CPS_URLS = _CPS_URLS;
{$EXTERNALSYM CPS_URLS}
TCpsUrls = CPS_URLS;
PCpsUrls = PCPS_URLS;
PCERT_POLICY95_QUALIFIER1 = ^CERT_POLICY95_QUALIFIER1;
{$EXTERNALSYM PCERT_POLICY95_QUALIFIER1}
_CERT_POLICY95_QUALIFIER1 = record
pszPracticesReference: LPWSTR; // optional
pszNoticeIdentifier: LPSTR; // optional
pszNSINoticeIdentifier: LPSTR; // optional
cCPSURLs: DWORD;
rgCPSURLs: PCPS_URLS; // optional
end;
{$EXTERNALSYM _CERT_POLICY95_QUALIFIER1}
CERT_POLICY95_QUALIFIER1 = _CERT_POLICY95_QUALIFIER1;
{$EXTERNALSYM CERT_POLICY95_QUALIFIER1}
TCertPolicy95Qualifier1 = CERT_POLICY95_QUALIFIER1;
PCertPolicy95Qualifier1 = PCERT_POLICY95_QUALIFIER1;
//+-------------------------------------------------------------------------
// RSA_CSP_PUBLICKEYBLOB
//
// pvStructInfo points to a PUBLICKEYSTRUC immediately followed by a
// RSAPUBKEY and the modulus bytes.
//
// CryptExportKey outputs the above StructInfo for a dwBlobType of
// PUBLICKEYBLOB. CryptImportKey expects the above StructInfo when
// importing a public key.
//
// For dwCertEncodingType = X509_ASN_ENCODING, the RSA_CSP_PUBLICKEYBLOB is
// encoded as a PKCS #1 RSAPublicKey consisting of a SEQUENCE of a
// modulus INTEGER and a publicExponent INTEGER. The modulus is encoded
// as being a unsigned integer. When decoded, if the modulus was encoded
// as unsigned integer with a leading 0 byte, the 0 byte is removed before
// converting to the CSP modulus bytes.
//
// For decode, the aiKeyAlg field of PUBLICKEYSTRUC is always set to
// CALG_RSA_KEYX.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// X509_KEYGEN_REQUEST_TO_BE_SIGNED
//
// pvStructInfo points to CERT_KEYGEN_REQUEST_INFO.
//
// For CryptDecodeObject(), the pbEncoded is the "to be signed" plus its
// signature (output of a X509_CERT CryptEncodeObject()).
//
// For CryptEncodeObject(), the pbEncoded is just the "to be signed".
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// PKCS_ATTRIBUTE data structure
//
// pvStructInfo points to a CRYPT_ATTRIBUTE.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// PKCS_ATTRIBUTES data structure
//
// pvStructInfo points to a CRYPT_ATTRIBUTES.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// PKCS_CONTENT_INFO_SEQUENCE_OF_ANY data structure
//
// pvStructInfo points to following CRYPT_CONTENT_INFO_SEQUENCE_OF_ANY.
//
// For X509_ASN_ENCODING: encoded as a PKCS#7 ContentInfo structure wrapping
// a sequence of ANY. The value of the contentType field is pszObjId,
// while the content field is the following structure:
// SequenceOfAny ::= SEQUENCE OF ANY
//
// The CRYPT_DER_BLOBs point to the already encoded ANY content.
//--------------------------------------------------------------------------
PCRYPT_CONTENT_INFO_SEQUENCE_OF_ANY = ^CRYPT_CONTENT_INFO_SEQUENCE_OF_ANY;
{$EXTERNALSYM PCRYPT_CONTENT_INFO_SEQUENCE_OF_ANY}
_CRYPT_CONTENT_INFO_SEQUENCE_OF_ANY = record
pszObjId: LPSTR;
cValue: DWORD;
rgValue: PCRYPT_DER_BLOB;
end;
{$EXTERNALSYM _CRYPT_CONTENT_INFO_SEQUENCE_OF_ANY}
CRYPT_CONTENT_INFO_SEQUENCE_OF_ANY = _CRYPT_CONTENT_INFO_SEQUENCE_OF_ANY;
{$EXTERNALSYM CRYPT_CONTENT_INFO_SEQUENCE_OF_ANY}
TCryptContentInfoSequenceOfAny = CRYPT_CONTENT_INFO_SEQUENCE_OF_ANY;
PCryptContentInfoSequenceOfAny = PCRYPT_CONTENT_INFO_SEQUENCE_OF_ANY;
//+-------------------------------------------------------------------------
// PKCS_CONTENT_INFO data structure
//
// pvStructInfo points to following CRYPT_CONTENT_INFO.
//
// For X509_ASN_ENCODING: encoded as a PKCS#7 ContentInfo structure.
// The CRYPT_DER_BLOB points to the already encoded ANY content.
//--------------------------------------------------------------------------
PCRYPT_CONTENT_INFO = ^CRYPT_CONTENT_INFO;
{$EXTERNALSYM PCRYPT_CONTENT_INFO}
_CRYPT_CONTENT_INFO = record
pszObjId: LPSTR;
Content: CRYPT_DER_BLOB;
end;
{$EXTERNALSYM _CRYPT_CONTENT_INFO}
CRYPT_CONTENT_INFO = _CRYPT_CONTENT_INFO;
{$EXTERNALSYM CRYPT_CONTENT_INFO}
TCryptContentInfo = CRYPT_CONTENT_INFO;
PCryptContentInfo = PCRYPT_CONTENT_INFO;
//+-------------------------------------------------------------------------
// X509_OCTET_STRING data structure
//
// pvStructInfo points to a CRYPT_DATA_BLOB.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// X509_BITS data structure
//
// pvStructInfo points to a CRYPT_BIT_BLOB.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// X509_BITS_WITHOUT_TRAILING_ZEROES data structure
//
// pvStructInfo points to a CRYPT_BIT_BLOB.
//
// The same as X509_BITS, except before encoding, the bit length is
// decremented to exclude trailing zero bits.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// X509_INTEGER data structure
//
// pvStructInfo points to an int.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// X509_MULTI_BYTE_INTEGER data structure
//
// pvStructInfo points to a CRYPT_INTEGER_BLOB.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// X509_ENUMERATED data structure
//
// pvStructInfo points to an int containing the enumerated value
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// X509_CHOICE_OF_TIME data structure
//
// pvStructInfo points to a FILETIME.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// X509_SEQUENCE_OF_ANY data structure
//
// pvStructInfo points to following CRYPT_SEQUENCE_OF_ANY.
//
// The CRYPT_DER_BLOBs point to the already encoded ANY content.
//--------------------------------------------------------------------------
PCRYPT_SEQUENCE_OF_ANY = ^CRYPT_SEQUENCE_OF_ANY;
{$EXTERNALSYM PCRYPT_SEQUENCE_OF_ANY}
_CRYPT_SEQUENCE_OF_ANY = record
cValue: DWORD;
rgValue: PCRYPT_DER_BLOB;
end;
{$EXTERNALSYM _CRYPT_SEQUENCE_OF_ANY}
CRYPT_SEQUENCE_OF_ANY = _CRYPT_SEQUENCE_OF_ANY;
{$EXTERNALSYM CRYPT_SEQUENCE_OF_ANY}
TCryptSequenceOfAny = CRYPT_SEQUENCE_OF_ANY;
PCryptSequenceOfAny = PCRYPT_SEQUENCE_OF_ANY;
//+-------------------------------------------------------------------------
// X509_AUTHORITY_KEY_ID2
// szOID_AUTHORITY_KEY_IDENTIFIER2
//
// pvStructInfo points to following CERT_AUTHORITY_KEY_ID2_INFO.
//
// For CRYPT_E_INVALID_IA5_STRING, the error location is returned in
// *pcbEncoded by CryptEncodeObject(X509_AUTHORITY_KEY_ID2)
//
// See X509_ALTERNATE_NAME for error location defines.
//--------------------------------------------------------------------------
PCERT_AUTHORITY_KEY_ID2_INFO = ^CERT_AUTHORITY_KEY_ID2_INFO;
{$EXTERNALSYM PCERT_AUTHORITY_KEY_ID2_INFO}
_CERT_AUTHORITY_KEY_ID2_INFO = record
KeyId: CRYPT_DATA_BLOB;
AuthorityCertIssuer: CERT_ALT_NAME_INFO; // Optional, set cAltEntry
// to 0 to omit.
AuthorityCertSerialNumber: CRYPT_INTEGER_BLOB;
end;
{$EXTERNALSYM _CERT_AUTHORITY_KEY_ID2_INFO}
CERT_AUTHORITY_KEY_ID2_INFO = _CERT_AUTHORITY_KEY_ID2_INFO;
{$EXTERNALSYM CERT_AUTHORITY_KEY_ID2_INFO}
TCertAuthorityKeyId2Info = CERT_AUTHORITY_KEY_ID2_INFO;
PCertAuthorityKeyId2Info = PCERT_AUTHORITY_KEY_ID2_INFO;
//+-------------------------------------------------------------------------
// szOID_SUBJECT_KEY_IDENTIFIER
//
// pvStructInfo points to a CRYPT_DATA_BLOB.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// X509_AUTHORITY_INFO_ACCESS
// szOID_AUTHORITY_INFO_ACCESS
//
// pvStructInfo points to following CERT_AUTHORITY_INFO_ACCESS.
//
// For CRYPT_E_INVALID_IA5_STRING, the error location is returned in
// *pcbEncoded by CryptEncodeObject(X509_AUTHORITY_INFO_ACCESS)
//
// Error location consists of:
// ENTRY_INDEX - 8 bits << 16
// VALUE_INDEX - 16 bits (unicode character index)
//
// See X509_ALTERNATE_NAME for ENTRY_INDEX and VALUE_INDEX error location
// defines.
//--------------------------------------------------------------------------
PCERT_ACCESS_DESCRIPTION = ^CERT_ACCESS_DESCRIPTION;
{$EXTERNALSYM PCERT_ACCESS_DESCRIPTION}
_CERT_ACCESS_DESCRIPTION = record
pszAccessMethod: LPSTR; // pszObjId
AccessLocation: CERT_ALT_NAME_ENTRY;
end;
{$EXTERNALSYM _CERT_ACCESS_DESCRIPTION}
CERT_ACCESS_DESCRIPTION = _CERT_ACCESS_DESCRIPTION;
{$EXTERNALSYM CERT_ACCESS_DESCRIPTION}
TCertAccessDescription = CERT_ACCESS_DESCRIPTION;
PCertAccessDescription = PCERT_ACCESS_DESCRIPTION;
PCERT_AUTHORITY_INFO_ACCESS = ^CERT_AUTHORITY_INFO_ACCESS;
{$EXTERNALSYM PCERT_AUTHORITY_INFO_ACCESS}
_CERT_AUTHORITY_INFO_ACCESS = record
cAccDescr: DWORD;
rgAccDescr: PCERT_ACCESS_DESCRIPTION;
end;
{$EXTERNALSYM _CERT_AUTHORITY_INFO_ACCESS}
CERT_AUTHORITY_INFO_ACCESS = _CERT_AUTHORITY_INFO_ACCESS;
{$EXTERNALSYM CERT_AUTHORITY_INFO_ACCESS}
TCertAuthorityInfoAccess = CERT_AUTHORITY_INFO_ACCESS;
PCertAuthorityInfoAccess = PCERT_AUTHORITY_INFO_ACCESS;
//+-------------------------------------------------------------------------
// PKIX Access Description: Access Method Object Identifiers
//--------------------------------------------------------------------------
const
szOID_PKIX_ACC_DESCR = '1.3.6.1.5.5.7.48';
{$EXTERNALSYM szOID_PKIX_ACC_DESCR}
szOID_PKIX_OCSP = '1.3.6.1.5.5.7.48.1';
{$EXTERNALSYM szOID_PKIX_OCSP}
szOID_PKIX_CA_ISSUERS = '1.3.6.1.5.5.7.48.2';
{$EXTERNALSYM szOID_PKIX_CA_ISSUERS}
//+-------------------------------------------------------------------------
// X509_CRL_REASON_CODE
// szOID_CRL_REASON_CODE
//
// pvStructInfo points to an int which can be set to one of the following
// enumerated values:
//--------------------------------------------------------------------------
CRL_REASON_UNSPECIFIED = 0;
{$EXTERNALSYM CRL_REASON_UNSPECIFIED}
CRL_REASON_KEY_COMPROMISE = 1;
{$EXTERNALSYM CRL_REASON_KEY_COMPROMISE}
CRL_REASON_CA_COMPROMISE = 2;
{$EXTERNALSYM CRL_REASON_CA_COMPROMISE}
CRL_REASON_AFFILIATION_CHANGED = 3;
{$EXTERNALSYM CRL_REASON_AFFILIATION_CHANGED}
CRL_REASON_SUPERSEDED = 4;
{$EXTERNALSYM CRL_REASON_SUPERSEDED}
CRL_REASON_CESSATION_OF_OPERATION = 5;
{$EXTERNALSYM CRL_REASON_CESSATION_OF_OPERATION}
CRL_REASON_CERTIFICATE_HOLD = 6;
{$EXTERNALSYM CRL_REASON_CERTIFICATE_HOLD}
CRL_REASON_REMOVE_FROM_CRL = 8;
{$EXTERNALSYM CRL_REASON_REMOVE_FROM_CRL}
//+-------------------------------------------------------------------------
// X509_CRL_DIST_POINTS
// szOID_CRL_DIST_POINTS
//
// pvStructInfo points to following CRL_DIST_POINTS_INFO.
//
// For CRYPT_E_INVALID_IA5_STRING, the error location is returned in
// *pcbEncoded by CryptEncodeObject(X509_CRL_DIST_POINTS)
//
// Error location consists of:
// CRL_ISSUER_BIT - 1 bit << 31 (0 for FullName, 1 for CRLIssuer)
// POINT_INDEX - 7 bits << 24
// ENTRY_INDEX - 8 bits << 16
// VALUE_INDEX - 16 bits (unicode character index)
//
// See X509_ALTERNATE_NAME for ENTRY_INDEX and VALUE_INDEX error location
// defines.
//--------------------------------------------------------------------------
type
PCRL_DIST_POINT_NAME = ^CRL_DIST_POINT_NAME;
{$EXTERNALSYM PCRL_DIST_POINT_NAME}
_CRL_DIST_POINT_NAME = record
dwDistPointNameChoice: DWORD;
case Integer of
0: (FullName: CERT_ALT_NAME_INFO); // 1
1: ();// Not implemented IssuerRDN; // 2
end;
{$EXTERNALSYM _CRL_DIST_POINT_NAME}
CRL_DIST_POINT_NAME = _CRL_DIST_POINT_NAME;
{$EXTERNALSYM CRL_DIST_POINT_NAME}
TCrlDistPointName = CRL_DIST_POINT_NAME;
PCrlDistPointName = PCRL_DIST_POINT_NAME;
const
CRL_DIST_POINT_NO_NAME = 0;
{$EXTERNALSYM CRL_DIST_POINT_NO_NAME}
CRL_DIST_POINT_FULL_NAME = 1;
{$EXTERNALSYM CRL_DIST_POINT_FULL_NAME}
CRL_DIST_POINT_ISSUER_RDN_NAME = 2;
{$EXTERNALSYM CRL_DIST_POINT_ISSUER_RDN_NAME}
type
PCRL_DIST_POINT = ^CRL_DIST_POINT;
{$EXTERNALSYM PCRL_DIST_POINT}
_CRL_DIST_POINT = record
DistPointName: CRL_DIST_POINT_NAME; // OPTIONAL
ReasonFlags: CRYPT_BIT_BLOB; // OPTIONAL
CRLIssuer: CERT_ALT_NAME_INFO; // OPTIONAL
end;
{$EXTERNALSYM _CRL_DIST_POINT}
CRL_DIST_POINT = _CRL_DIST_POINT;
{$EXTERNALSYM CRL_DIST_POINT}
TCrlDistPoint = CRL_DIST_POINT;
PCrlDistPoint = PCRL_DIST_POINT;
const
CRL_REASON_UNUSED_FLAG = $80;
{$EXTERNALSYM CRL_REASON_UNUSED_FLAG}
CRL_REASON_KEY_COMPROMISE_FLAG = $40;
{$EXTERNALSYM CRL_REASON_KEY_COMPROMISE_FLAG}
CRL_REASON_CA_COMPROMISE_FLAG = $20;
{$EXTERNALSYM CRL_REASON_CA_COMPROMISE_FLAG}
CRL_REASON_AFFILIATION_CHANGED_FLAG = $10;
{$EXTERNALSYM CRL_REASON_AFFILIATION_CHANGED_FLAG}
CRL_REASON_SUPERSEDED_FLAG = $08;
{$EXTERNALSYM CRL_REASON_SUPERSEDED_FLAG}
CRL_REASON_CESSATION_OF_OPERATION_FLAG = $04;
{$EXTERNALSYM CRL_REASON_CESSATION_OF_OPERATION_FLAG}
CRL_REASON_CERTIFICATE_HOLD_FLAG = $02;
{$EXTERNALSYM CRL_REASON_CERTIFICATE_HOLD_FLAG}
type
PCRL_DIST_POINTS_INFO = ^CRL_DIST_POINTS_INFO;
{$EXTERNALSYM PCRL_DIST_POINTS_INFO}
_CRL_DIST_POINTS_INFO = record
cDistPoint: DWORD;
rgDistPoint: PCRL_DIST_POINT;
end;
{$EXTERNALSYM _CRL_DIST_POINTS_INFO}
CRL_DIST_POINTS_INFO = _CRL_DIST_POINTS_INFO;
{$EXTERNALSYM CRL_DIST_POINTS_INFO}
TCrlDistPointsInfo = CRL_DIST_POINTS_INFO;
PCrlDistPointsInfo = PCRL_DIST_POINTS_INFO;
const
CRL_DIST_POINT_ERR_INDEX_MASK = $7F;
{$EXTERNALSYM CRL_DIST_POINT_ERR_INDEX_MASK}
CRL_DIST_POINT_ERR_INDEX_SHIFT = 24;
{$EXTERNALSYM CRL_DIST_POINT_ERR_INDEX_SHIFT}
function GET_CRL_DIST_POINT_ERR_INDEX(X: DWORD): DWORD;
{$EXTERNALSYM GET_CRL_DIST_POINT_ERR_INDEX}
const
CRL_DIST_POINT_ERR_CRL_ISSUER_BIT = DWORD($80000000);
{$EXTERNALSYM CRL_DIST_POINT_ERR_CRL_ISSUER_BIT}
function IS_CRL_DIST_POINT_ERR_CRL_ISSUER(X: DWORD): Boolean;
{$EXTERNALSYM IS_CRL_DIST_POINT_ERR_CRL_ISSUER}
//+-------------------------------------------------------------------------
// X509_ENHANCED_KEY_USAGE
// szOID_ENHANCED_KEY_USAGE
//
// pvStructInfo points to a CERT_ENHKEY_USAGE, CTL_USAGE.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// szOID_NEXT_UPDATE_LOCATION
//
// pvStructInfo points to a CERT_ALT_NAME_INFO.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// PKCS_CTL
// szOID_CTL
//
// pvStructInfo points to a CTL_INFO.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// PKCS_SORTED_CTL
//
// pvStructInfo points to a CTL_INFO.
//
// Same as for PKCS_CTL, except, the CTL entries are sorted. The following
// extension containing the sort information is inserted as the first
// extension in the encoded CTL.
//
// Only supported for Encoding. CRYPT_ENCODE_ALLOC_FLAG flag must be
// set.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// Sorted CTL TrustedSubjects extension
//
// Array of little endian DWORDs:
// [0] - Flags
// [1] - Count of HashBucket entry offsets
// [2] - Maximum HashBucket entry collision count
// [3 ..] (Count + 1) HashBucket entry offsets
//
// When this extension is present in the CTL,
// the ASN.1 encoded sequence of TrustedSubjects are HashBucket ordered.
//
// The entry offsets point to the start of the first encoded TrustedSubject
// sequence for the HashBucket. The encoded TrustedSubjects for a HashBucket
// continue until the encoded offset of the next HashBucket. A HashBucket has
// no entries if HashBucket[N] == HashBucket[N + 1].
//
// The HashBucket offsets are from the start of the ASN.1 encoded CTL_INFO.
//--------------------------------------------------------------------------
const
SORTED_CTL_EXT_FLAGS_OFFSET = 0 * 4;
{$EXTERNALSYM SORTED_CTL_EXT_FLAGS_OFFSET}
SORTED_CTL_EXT_COUNT_OFFSET = 1 * 4;
{$EXTERNALSYM SORTED_CTL_EXT_COUNT_OFFSET}
SORTED_CTL_EXT_MAX_COLLISION_OFFSET = 2 * 4;
{$EXTERNALSYM SORTED_CTL_EXT_MAX_COLLISION_OFFSET}
SORTED_CTL_EXT_HASH_BUCKET_OFFSET = 3 * 4;
{$EXTERNALSYM SORTED_CTL_EXT_HASH_BUCKET_OFFSET}
// If the SubjectIdentifiers are a MD5 or SHA1 hash, the following flag is
// set. When set, the first 4 bytes of the SubjectIdentifier are used as
// the dwhash. Otherwise, the SubjectIdentifier bytes are hashed into dwHash.
// In either case the HashBucket index = dwHash % cHashBucket.
SORTED_CTL_EXT_HASHED_SUBJECT_IDENTIFIER_FLAG = $1;
{$EXTERNALSYM SORTED_CTL_EXT_HASHED_SUBJECT_IDENTIFIER_FLAG}
//+-------------------------------------------------------------------------
// X509_MULTI_BYTE_UINT
//
// pvStructInfo points to a CRYPT_UINT_BLOB. Before encoding, inserts a
// leading 0x00. After decoding, removes a leading 0x00.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// X509_DSS_PUBLICKEY
//
// pvStructInfo points to a CRYPT_UINT_BLOB.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// X509_DSS_PARAMETERS
//
// pvStructInfo points to following CERT_DSS_PARAMETERS data structure.
//--------------------------------------------------------------------------
type
PCERT_DSS_PARAMETERS = ^CERT_DSS_PARAMETERS;
{$EXTERNALSYM PCERT_DSS_PARAMETERS}
_CERT_DSS_PARAMETERS = record
p: CRYPT_UINT_BLOB;
q: CRYPT_UINT_BLOB;
g: CRYPT_UINT_BLOB;
end;
{$EXTERNALSYM _CERT_DSS_PARAMETERS}
CERT_DSS_PARAMETERS = _CERT_DSS_PARAMETERS;
{$EXTERNALSYM CERT_DSS_PARAMETERS}
TCertDssParameters = CERT_DSS_PARAMETERS;
PCertDssParameters = PCERT_DSS_PARAMETERS;
//+-------------------------------------------------------------------------
// X509_DSS_SIGNATURE
//
// pvStructInfo is a BYTE rgbSignature[CERT_DSS_SIGNATURE_LEN]. The
// bytes are ordered as output by the DSS CSP's CryptSignHash().
//--------------------------------------------------------------------------
const
CERT_DSS_R_LEN = 20;
{$EXTERNALSYM CERT_DSS_R_LEN}
CERT_DSS_S_LEN = 20;
{$EXTERNALSYM CERT_DSS_S_LEN}
CERT_DSS_SIGNATURE_LEN = CERT_DSS_R_LEN + CERT_DSS_S_LEN;
{$EXTERNALSYM CERT_DSS_SIGNATURE_LEN}
// Sequence of 2 unsigned integers (the extra +1 is for a potential leading
// 0x00 to make the integer unsigned)
CERT_MAX_ASN_ENCODED_DSS_SIGNATURE_LEN = 2 + 2 * (2 + 20 + 1);
{$EXTERNALSYM CERT_MAX_ASN_ENCODED_DSS_SIGNATURE_LEN}
//+-------------------------------------------------------------------------
// X509_DH_PUBLICKEY
//
// pvStructInfo points to a CRYPT_UINT_BLOB.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// X509_DH_PARAMETERS
//
// pvStructInfo points to following CERT_DH_PARAMETERS data structure.
//--------------------------------------------------------------------------
type
PCERT_DH_PARAMETERS = ^CERT_DH_PARAMETERS;
{$EXTERNALSYM PCERT_DH_PARAMETERS}
_CERT_DH_PARAMETERS = record
p: CRYPT_UINT_BLOB;
g: CRYPT_UINT_BLOB;
end;
{$EXTERNALSYM _CERT_DH_PARAMETERS}
CERT_DH_PARAMETERS = _CERT_DH_PARAMETERS;
{$EXTERNALSYM CERT_DH_PARAMETERS}
TCertDhParameters = CERT_DH_PARAMETERS;
PCertDhParameters = PCERT_DH_PARAMETERS;
//+-------------------------------------------------------------------------
// X942_DH_PARAMETERS
//
// pvStructInfo points to following CERT_X942_DH_PARAMETERS data structure.
//
// If q.cbData == 0, then, the following fields are zero'ed.
//--------------------------------------------------------------------------
PCERT_X942_DH_VALIDATION_PARAMS = ^CERT_X942_DH_VALIDATION_PARAMS;
{$EXTERNALSYM PCERT_X942_DH_VALIDATION_PARAMS}
_CERT_X942_DH_VALIDATION_PARAMS = record
seed: CRYPT_BIT_BLOB;
pgenCounter: DWORD;
end;
{$EXTERNALSYM _CERT_X942_DH_VALIDATION_PARAMS}
CERT_X942_DH_VALIDATION_PARAMS = _CERT_X942_DH_VALIDATION_PARAMS;
{$EXTERNALSYM CERT_X942_DH_VALIDATION_PARAMS}
TCertX942DhValidationParams = CERT_X942_DH_VALIDATION_PARAMS;
PCertX942DhValidationParams = PCERT_X942_DH_VALIDATION_PARAMS;
PCERT_X942_DH_PARAMETERS = ^CERT_X942_DH_PARAMETERS;
{$EXTERNALSYM PCERT_X942_DH_PARAMETERS}
_CERT_X942_DH_PARAMETERS = record
p: CRYPT_UINT_BLOB; // odd prime, p = jq + 1
g: CRYPT_UINT_BLOB; // generator, g
q: CRYPT_UINT_BLOB; // factor of p - 1, OPTIONAL
j: CRYPT_UINT_BLOB; // subgroup factor, OPTIONAL
pValidationParams: PCERT_X942_DH_VALIDATION_PARAMS; // OPTIONAL
end;
{$EXTERNALSYM _CERT_X942_DH_PARAMETERS}
CERT_X942_DH_PARAMETERS = _CERT_X942_DH_PARAMETERS;
{$EXTERNALSYM CERT_X942_DH_PARAMETERS}
TCertX942DhParameters = CERT_X942_DH_PARAMETERS;
PCertX942DhParameters = PCERT_X942_DH_PARAMETERS;
//+-------------------------------------------------------------------------
// X942_OTHER_INFO
//
// pvStructInfo points to following CRYPT_X942_OTHER_INFO data structure.
//
// rgbCounter and rgbKeyLength are in Little Endian order.
//--------------------------------------------------------------------------
const
CRYPT_X942_COUNTER_BYTE_LENGTH = 4;
{$EXTERNALSYM CRYPT_X942_COUNTER_BYTE_LENGTH}
CRYPT_X942_KEY_LENGTH_BYTE_LENGTH = 4;
{$EXTERNALSYM CRYPT_X942_KEY_LENGTH_BYTE_LENGTH}
CRYPT_X942_PUB_INFO_BYTE_LENGTH = 512 div 8;
{$EXTERNALSYM CRYPT_X942_PUB_INFO_BYTE_LENGTH}
type
PCRYPT_X942_OTHER_INFO = ^CRYPT_X942_OTHER_INFO;
{$EXTERNALSYM PCRYPT_X942_OTHER_INFO}
_CRYPT_X942_OTHER_INFO = record
pszContentEncryptionObjId: LPSTR;
rgbCounter: array [0..CRYPT_X942_COUNTER_BYTE_LENGTH - 1] of BYTE;
rgbKeyLength: array [0..CRYPT_X942_KEY_LENGTH_BYTE_LENGTH - 1] of BYTE;
PubInfo: CRYPT_DATA_BLOB; // OPTIONAL
end;
{$EXTERNALSYM _CRYPT_X942_OTHER_INFO}
CRYPT_X942_OTHER_INFO = _CRYPT_X942_OTHER_INFO;
{$EXTERNALSYM CRYPT_X942_OTHER_INFO}
TCryptX942OtherInfo = CRYPT_X942_OTHER_INFO;
PCryptX942OtherInfo = PCRYPT_X942_OTHER_INFO;
//+-------------------------------------------------------------------------
// PKCS_RC2_CBC_PARAMETERS
// szOID_RSA_RC2CBC
//
// pvStructInfo points to following CRYPT_RC2_CBC_PARAMETERS data structure.
//--------------------------------------------------------------------------
PCRYPT_RC2_CBC_PARAMETERS = ^CRYPT_RC2_CBC_PARAMETERS;
{$EXTERNALSYM PCRYPT_RC2_CBC_PARAMETERS}
_CRYPT_RC2_CBC_PARAMETERS = record
dwVersion: DWORD;
fIV: BOOL; // set if has following IV
rgbIV: array [0..7] of BYTE;
end;
{$EXTERNALSYM _CRYPT_RC2_CBC_PARAMETERS}
CRYPT_RC2_CBC_PARAMETERS = _CRYPT_RC2_CBC_PARAMETERS;
{$EXTERNALSYM CRYPT_RC2_CBC_PARAMETERS}
TCryptRc2CbcParameters = CRYPT_RC2_CBC_PARAMETERS;
PCryptRc2CbcParameters = PCRYPT_RC2_CBC_PARAMETERS;
const
CRYPT_RC2_40BIT_VERSION = 160;
{$EXTERNALSYM CRYPT_RC2_40BIT_VERSION}
CRYPT_RC2_56BIT_VERSION = 52;
{$EXTERNALSYM CRYPT_RC2_56BIT_VERSION}
CRYPT_RC2_64BIT_VERSION = 120;
{$EXTERNALSYM CRYPT_RC2_64BIT_VERSION}
CRYPT_RC2_128BIT_VERSION = 58;
{$EXTERNALSYM CRYPT_RC2_128BIT_VERSION}
//+-------------------------------------------------------------------------
// PKCS_SMIME_CAPABILITIES
// szOID_RSA_SMIMECapabilities
//
// pvStructInfo points to following CRYPT_SMIME_CAPABILITIES data structure.
//
// Note, for CryptEncodeObject(X509_ASN_ENCODING), Parameters.cbData == 0
// causes the encoded parameters to be omitted and not encoded as a NULL
// (05 00) as is done when encoding a CRYPT_ALGORITHM_IDENTIFIER. This
// is per the SMIME specification for encoding capabilities.
//--------------------------------------------------------------------------
type
PCRYPT_SMIME_CAPABILITY = ^CRYPT_SMIME_CAPABILITY;
{$EXTERNALSYM PCRYPT_SMIME_CAPABILITY}
_CRYPT_SMIME_CAPABILITY = record
pszObjId: LPSTR;
Parameters: CRYPT_OBJID_BLOB;
end;
{$EXTERNALSYM _CRYPT_SMIME_CAPABILITY}
CRYPT_SMIME_CAPABILITY = _CRYPT_SMIME_CAPABILITY;
{$EXTERNALSYM CRYPT_SMIME_CAPABILITY}
TCryptSmimeCapability = CRYPT_SMIME_CAPABILITY;
PCryptSmimeCapability = PCRYPT_SMIME_CAPABILITY;
PCRYPT_SMIME_CAPABILITIES = ^CRYPT_SMIME_CAPABILITIES;
{$EXTERNALSYM PCRYPT_SMIME_CAPABILITIES}
_CRYPT_SMIME_CAPABILITIES = record
cCapability: DWORD;
rgCapability: PCRYPT_SMIME_CAPABILITY;
end;
{$EXTERNALSYM _CRYPT_SMIME_CAPABILITIES}
CRYPT_SMIME_CAPABILITIES = _CRYPT_SMIME_CAPABILITIES;
{$EXTERNALSYM CRYPT_SMIME_CAPABILITIES}
TCryptSmimeCapabilities = CRYPT_SMIME_CAPABILITIES;
PCryptSmimeCapabilities = PCRYPT_SMIME_CAPABILITIES;
//+-------------------------------------------------------------------------
// PKCS7_SIGNER_INFO
//
// pvStructInfo points to CMSG_SIGNER_INFO.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMS_SIGNER_INFO
//
// pvStructInfo points to CMSG_CMS_SIGNER_INFO.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// Netscape Certificate Extension Object Identifiers
//--------------------------------------------------------------------------
const
szOID_NETSCAPE = '2.16.840.1.113730';
{$EXTERNALSYM szOID_NETSCAPE}
szOID_NETSCAPE_CERT_EXTENSION = '2.16.840.1.113730.1';
{$EXTERNALSYM szOID_NETSCAPE_CERT_EXTENSION}
szOID_NETSCAPE_CERT_TYPE = '2.16.840.1.113730.1.1';
{$EXTERNALSYM szOID_NETSCAPE_CERT_TYPE}
szOID_NETSCAPE_BASE_URL = '2.16.840.1.113730.1.2';
{$EXTERNALSYM szOID_NETSCAPE_BASE_URL}
szOID_NETSCAPE_REVOCATION_URL = '2.16.840.1.113730.1.3';
{$EXTERNALSYM szOID_NETSCAPE_REVOCATION_URL}
szOID_NETSCAPE_CA_REVOCATION_URL = '2.16.840.1.113730.1.4';
{$EXTERNALSYM szOID_NETSCAPE_CA_REVOCATION_URL}
szOID_NETSCAPE_CERT_RENEWAL_URL = '2.16.840.1.113730.1.7';
{$EXTERNALSYM szOID_NETSCAPE_CERT_RENEWAL_URL}
szOID_NETSCAPE_CA_POLICY_URL = '2.16.840.1.113730.1.8';
{$EXTERNALSYM szOID_NETSCAPE_CA_POLICY_URL}
szOID_NETSCAPE_SSL_SERVER_NAME = '2.16.840.1.113730.1.12';
{$EXTERNALSYM szOID_NETSCAPE_SSL_SERVER_NAME}
szOID_NETSCAPE_COMMENT = '2.16.840.1.113730.1.13';
{$EXTERNALSYM szOID_NETSCAPE_COMMENT}
//+-------------------------------------------------------------------------
// Netscape Certificate Data Type Object Identifiers
//--------------------------------------------------------------------------
szOID_NETSCAPE_DATA_TYPE = '2.16.840.1.113730.2';
{$EXTERNALSYM szOID_NETSCAPE_DATA_TYPE}
szOID_NETSCAPE_CERT_SEQUENCE = '2.16.840.1.113730.2.5';
{$EXTERNALSYM szOID_NETSCAPE_CERT_SEQUENCE}
//+-------------------------------------------------------------------------
// szOID_NETSCAPE_CERT_TYPE extension
//
// Its value is a bit string. CryptDecodeObject/CryptEncodeObject using
// X509_BITS or X509_BITS_WITHOUT_TRAILING_ZEROES.
//
// The following bits are defined:
//--------------------------------------------------------------------------
NETSCAPE_SSL_CLIENT_AUTH_CERT_TYPE = $80;
{$EXTERNALSYM NETSCAPE_SSL_CLIENT_AUTH_CERT_TYPE}
NETSCAPE_SSL_SERVER_AUTH_CERT_TYPE = $40;
{$EXTERNALSYM NETSCAPE_SSL_SERVER_AUTH_CERT_TYPE}
NETSCAPE_SMIME_CERT_TYPE = $20;
{$EXTERNALSYM NETSCAPE_SMIME_CERT_TYPE}
NETSCAPE_SIGN_CERT_TYPE = $10;
{$EXTERNALSYM NETSCAPE_SIGN_CERT_TYPE}
NETSCAPE_SSL_CA_CERT_TYPE = $04;
{$EXTERNALSYM NETSCAPE_SSL_CA_CERT_TYPE}
NETSCAPE_SMIME_CA_CERT_TYPE = $02;
{$EXTERNALSYM NETSCAPE_SMIME_CA_CERT_TYPE}
NETSCAPE_SIGN_CA_CERT_TYPE = $01;
{$EXTERNALSYM NETSCAPE_SIGN_CA_CERT_TYPE}
//+-------------------------------------------------------------------------
// szOID_NETSCAPE_BASE_URL extension
//
// Its value is an IA5_STRING. CryptDecodeObject/CryptEncodeObject using
// X509_ANY_STRING or X509_UNICODE_ANY_STRING, where,
// dwValueType = CERT_RDN_IA5_STRING.
//
// When present this string is added to the beginning of all relative URLs
// in the certificate. This extension can be considered an optimization
// to reduce the size of the URL extensions.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// szOID_NETSCAPE_REVOCATION_URL extension
//
// Its value is an IA5_STRING. CryptDecodeObject/CryptEncodeObject using
// X509_ANY_STRING or X509_UNICODE_ANY_STRING, where,
// dwValueType = CERT_RDN_IA5_STRING.
//
// It is a relative or absolute URL that can be used to check the
// revocation status of a certificate. The revocation check will be
// performed as an HTTP GET method using a url that is the concatenation of
// revocation-url and certificate-serial-number.
// Where the certificate-serial-number is encoded as a string of
// ascii hexadecimal digits. For example, if the netscape-base-url is
// https://www.certs-r-us.com/, the netscape-revocation-url is
// cgi-bin/check-rev.cgi?, and the certificate serial number is 173420,
// the resulting URL would be:
// https://www.certs-r-us.com/cgi-bin/check-rev.cgi?02a56c
//
// The server should return a document with a Content-Type of
// application/x-netscape-revocation. The document should contain
// a single ascii digit, '1' if the certificate is not curently valid,
// and '0' if it is curently valid.
//
// Note: for all of the URLs that include the certificate serial number,
// the serial number will be encoded as a string which consists of an even
// number of hexadecimal digits. If the number of significant digits is odd,
// the string will have a single leading zero to ensure an even number of
// digits is generated.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// szOID_NETSCAPE_CA_REVOCATION_URL extension
//
// Its value is an IA5_STRING. CryptDecodeObject/CryptEncodeObject using
// X509_ANY_STRING or X509_UNICODE_ANY_STRING, where,
// dwValueType = CERT_RDN_IA5_STRING.
//
// It is a relative or absolute URL that can be used to check the
// revocation status of any certificates that are signed by the CA that
// this certificate belongs to. This extension is only valid in CA
// certificates. The use of this extension is the same as the above
// szOID_NETSCAPE_REVOCATION_URL extension.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// szOID_NETSCAPE_CERT_RENEWAL_URL extension
//
// Its value is an IA5_STRING. CryptDecodeObject/CryptEncodeObject using
// X509_ANY_STRING or X509_UNICODE_ANY_STRING, where,
// dwValueType = CERT_RDN_IA5_STRING.
//
// It is a relative or absolute URL that points to a certificate renewal
// form. The renewal form will be accessed with an HTTP GET method using a
// url that is the concatenation of renewal-url and
// certificate-serial-number. Where the certificate-serial-number is
// encoded as a string of ascii hexadecimal digits. For example, if the
// netscape-base-url is https://www.certs-r-us.com/, the
// netscape-cert-renewal-url is cgi-bin/check-renew.cgi?, and the
// certificate serial number is 173420, the resulting URL would be:
// https://www.certs-r-us.com/cgi-bin/check-renew.cgi?02a56c
// The document returned should be an HTML form that will allow the user
// to request a renewal of their certificate.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// szOID_NETSCAPE_CA_POLICY_URL extension
//
// Its value is an IA5_STRING. CryptDecodeObject/CryptEncodeObject using
// X509_ANY_STRING or X509_UNICODE_ANY_STRING, where,
// dwValueType = CERT_RDN_IA5_STRING.
//
// It is a relative or absolute URL that points to a web page that
// describes the policies under which the certificate was issued.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// szOID_NETSCAPE_SSL_SERVER_NAME extension
//
// Its value is an IA5_STRING. CryptDecodeObject/CryptEncodeObject using
// X509_ANY_STRING or X509_UNICODE_ANY_STRING, where,
// dwValueType = CERT_RDN_IA5_STRING.
//
// It is a "shell expression" that can be used to match the hostname of the
// SSL server that is using this certificate. It is recommended that if
// the server's hostname does not match this pattern the user be notified
// and given the option to terminate the SSL connection. If this extension
// is not present then the CommonName in the certificate subject's
// distinguished name is used for the same purpose.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// szOID_NETSCAPE_COMMENT extension
//
// Its value is an IA5_STRING. CryptDecodeObject/CryptEncodeObject using
// X509_ANY_STRING or X509_UNICODE_ANY_STRING, where,
// dwValueType = CERT_RDN_IA5_STRING.
//
// It is a comment that may be displayed to the user when the certificate
// is viewed.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// szOID_NETSCAPE_CERT_SEQUENCE
//
// Its value is a PKCS#7 ContentInfo structure wrapping a sequence of
// certificates. The value of the contentType field is
// szOID_NETSCAPE_CERT_SEQUENCE, while the content field is the following
// structure:
// CertificateSequence ::= SEQUENCE OF Certificate.
//
// CryptDecodeObject/CryptEncodeObject using
// PKCS_CONTENT_INFO_SEQUENCE_OF_ANY, where,
// pszObjId = szOID_NETSCAPE_CERT_SEQUENCE and the CRYPT_DER_BLOBs point
// to encoded X509 certificates.
//--------------------------------------------------------------------------
//+=========================================================================
// Object IDentifier (OID) Installable Functions: Data Structures and APIs
//==========================================================================
type
HCRYPTOIDFUNCSET = Pointer;
{$EXTERNALSYM HCRYPTOIDFUNCSET}
HCRYPTOIDFUNCADDR = Pointer;
{$EXTERNALSYM HCRYPTOIDFUNCADDR}
// Predefined OID Function Names
const
CRYPT_OID_ENCODE_OBJECT_FUNC = 'CryptDllEncodeObject';
{$EXTERNALSYM CRYPT_OID_ENCODE_OBJECT_FUNC}
CRYPT_OID_DECODE_OBJECT_FUNC = 'CryptDllDecodeObject';
{$EXTERNALSYM CRYPT_OID_DECODE_OBJECT_FUNC}
CRYPT_OID_ENCODE_OBJECT_EX_FUNC = 'CryptDllEncodeObjectEx';
{$EXTERNALSYM CRYPT_OID_ENCODE_OBJECT_EX_FUNC}
CRYPT_OID_DECODE_OBJECT_EX_FUNC = 'CryptDllDecodeObjectEx';
{$EXTERNALSYM CRYPT_OID_DECODE_OBJECT_EX_FUNC}
CRYPT_OID_CREATE_COM_OBJECT_FUNC = 'CryptDllCreateCOMObject';
{$EXTERNALSYM CRYPT_OID_CREATE_COM_OBJECT_FUNC}
CRYPT_OID_VERIFY_REVOCATION_FUNC = 'CertDllVerifyRevocation';
{$EXTERNALSYM CRYPT_OID_VERIFY_REVOCATION_FUNC}
CRYPT_OID_VERIFY_CTL_USAGE_FUNC = 'CertDllVerifyCTLUsage';
{$EXTERNALSYM CRYPT_OID_VERIFY_CTL_USAGE_FUNC}
CRYPT_OID_FORMAT_OBJECT_FUNC = 'CryptDllFormatObject';
{$EXTERNALSYM CRYPT_OID_FORMAT_OBJECT_FUNC}
CRYPT_OID_FIND_OID_INFO_FUNC = 'CryptDllFindOIDInfo';
{$EXTERNALSYM CRYPT_OID_FIND_OID_INFO_FUNC}
CRYPT_OID_FIND_LOCALIZED_NAME_FUNC = 'CryptDllFindLocalizedName';
{$EXTERNALSYM CRYPT_OID_FIND_LOCALIZED_NAME_FUNC}
// CryptDllEncodeObject has same function signature as CryptEncodeObject.
// CryptDllDecodeObject has same function signature as CryptDecodeObject.
// CryptDllEncodeObjectEx has same function signature as CryptEncodeObjectEx.
// The Ex version MUST support the CRYPT_ENCODE_ALLOC_FLAG option.
//
// If an Ex function isn't installed or registered, then, attempts to find
// a non-EX version. If the ALLOC flag is set, then, CryptEncodeObjectEx,
// does the allocation and calls the non-EX version twice.
// CryptDllDecodeObjectEx has same function signature as CryptDecodeObjectEx.
// The Ex version MUST support the CRYPT_DECODE_ALLOC_FLAG option.
//
// If an Ex function isn't installed or registered, then, attempts to find
// a non-EX version. If the ALLOC flag is set, then, CryptDecodeObjectEx,
// does the allocation and calls the non-EX version twice.
// CryptDllCreateCOMObject has the following signature:
// BOOL WINAPI CryptDllCreateCOMObject(
// IN DWORD dwEncodingType,
// IN LPCSTR pszOID,
// IN PCRYPT_DATA_BLOB pEncodedContent,
// IN DWORD dwFlags,
// IN REFIID riid,
// OUT void **ppvObj);
// CertDllVerifyRevocation has the same signature as CertVerifyRevocation
// (See CertVerifyRevocation for details on when called)
// CertDllVerifyCTLUsage has the same signature as CertVerifyCTLUsage
// CryptDllFindOIDInfo currently is only used to store values used by
// CryptFindOIDInfo. See CryptFindOIDInfo() for more details.
// CryptDllFindLocalizedName is only used to store localized string
// values used by CryptFindLocalizedName. See CryptFindLocalizedName() for
// more details.
// Example of a complete OID Function Registry Name:
// HKEY_LOCAL_MACHINE\Software\Microsoft\Cryptography\OID
// Encoding Type 1\CryptDllEncodeObject\1.2.3
//
// The key's L"Dll" value contains the name of the Dll.
// The key's L"FuncName" value overrides the default function name
CRYPT_OID_REGPATH = 'Software\Microsoft\Cryptography\OID';
{$EXTERNALSYM CRYPT_OID_REGPATH}
CRYPT_OID_REG_ENCODING_TYPE_PREFIX = 'EncodingType ';
{$EXTERNALSYM CRYPT_OID_REG_ENCODING_TYPE_PREFIX}
CRYPT_OID_REG_DLL_VALUE_NAME = 'Dll';
{$EXTERNALSYM CRYPT_OID_REG_DLL_VALUE_NAME}
CRYPT_OID_REG_FUNC_NAME_VALUE_NAME = 'FuncName';
{$EXTERNALSYM CRYPT_OID_REG_FUNC_NAME_VALUE_NAME}
CRYPT_OID_REG_FUNC_NAME_VALUE_NAME_A = 'FuncName';
{$EXTERNALSYM CRYPT_OID_REG_FUNC_NAME_VALUE_NAME_A}
// CRYPT_INSTALL_OID_FUNC_BEFORE_FLAG can be set in the key's L"CryptFlags"
// value to register the functions before the installed functions.
//
// CryptSetOIDFunctionValue must be called to set this value. L"CryptFlags"
// must be set using a dwValueType of REG_DWORD.
CRYPT_OID_REG_FLAGS_VALUE_NAME = 'CryptFlags';
{$EXTERNALSYM CRYPT_OID_REG_FLAGS_VALUE_NAME}
// OID used for Default OID functions
CRYPT_DEFAULT_OID = 'DEFAULT';
{$EXTERNALSYM CRYPT_DEFAULT_OID}
type
PCRYPT_OID_FUNC_ENTRY = ^CRYPT_OID_FUNC_ENTRY;
{$EXTERNALSYM PCRYPT_OID_FUNC_ENTRY}
_CRYPT_OID_FUNC_ENTRY = record
pszOID: LPCSTR;
pvFuncAddr: Pointer;
end;
{$EXTERNALSYM _CRYPT_OID_FUNC_ENTRY}
CRYPT_OID_FUNC_ENTRY = _CRYPT_OID_FUNC_ENTRY;
{$EXTERNALSYM CRYPT_OID_FUNC_ENTRY}
TCryptOidFuncEntry = CRYPT_OID_FUNC_ENTRY;
PCryptOidFuncEntry = PCRYPT_OID_FUNC_ENTRY;
const
CRYPT_INSTALL_OID_FUNC_BEFORE_FLAG = 1;
{$EXTERNALSYM CRYPT_INSTALL_OID_FUNC_BEFORE_FLAG}
//+-------------------------------------------------------------------------
// Install a set of callable OID function addresses.
//
// By default the functions are installed at end of the list.
// Set CRYPT_INSTALL_OID_FUNC_BEFORE_FLAG to install at beginning of list.
//
// hModule should be updated with the hModule passed to DllMain to prevent
// the Dll containing the function addresses from being unloaded by
// CryptGetOIDFuncAddress/CryptFreeOIDFunctionAddress. This would be the
// case when the Dll has also regsvr32'ed OID functions via
// CryptRegisterOIDFunction.
//
// DEFAULT functions are installed by setting rgFuncEntry[].pszOID =
// CRYPT_DEFAULT_OID.
//--------------------------------------------------------------------------
function CryptInstallOIDFunctionAddress(hModule: HMODULE; dwEncodingType: DWORD;
pszFuncName: LPCSTR; cFuncEntry: DWORD; rgFuncEntry: PCRYPT_OID_FUNC_ENTRY;
dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptInstallOIDFunctionAddress}
//+-------------------------------------------------------------------------
// Initialize and return handle to the OID function set identified by its
// function name.
//
// If the set already exists, a handle to the existing set is returned.
//--------------------------------------------------------------------------
function CryptInitOIDFunctionSet(pszFuncName: LPCSTR; dwFlags: DWORD): HCRYPTOIDFUNCSET; stdcall;
{$EXTERNALSYM CryptInitOIDFunctionSet}
//+-------------------------------------------------------------------------
// Search the list of installed functions for an encoding type and OID match.
// If not found, search the registry.
//
// For success, returns TRUE with *ppvFuncAddr updated with the function's
// address and *phFuncAddr updated with the function address's handle.
// The function's handle is AddRef'ed. CryptFreeOIDFunctionAddress needs to
// be called to release it.
//
// For a registry match, the Dll containing the function is loaded.
//
// By default, both the registered and installed function lists are searched.
// Set CRYPT_GET_INSTALLED_OID_FUNC_FLAG to only search the installed list
// of functions. This flag would be set by a registered function to get
// the address of a pre-installed function it was replacing. For example,
// the registered function might handle a new special case and call the
// pre-installed function to handle the remaining cases.
//--------------------------------------------------------------------------
function CryptGetOIDFunctionAddress(hFuncSet: HCRYPTOIDFUNCSET;
dwEncodingType: DWORD; pszOID: LPCSTR; dwFlags: DWORD;
var ppvFuncAddr: Pointer; var phFuncAddr: HCRYPTOIDFUNCADDR): BOOL; stdcall;
{$EXTERNALSYM CryptGetOIDFunctionAddress}
const
CRYPT_GET_INSTALLED_OID_FUNC_FLAG = $1;
{$EXTERNALSYM CRYPT_GET_INSTALLED_OID_FUNC_FLAG}
//+-------------------------------------------------------------------------
// Get the list of registered default Dll entries for the specified
// function set and encoding type.
//
// The returned list consists of none, one or more null terminated Dll file
// names. The list is terminated with an empty (L"\0") Dll file name.
// For example: L"first.dll" L"\0" L"second.dll" L"\0" L"\0"
//--------------------------------------------------------------------------
function CryptGetDefaultOIDDllList(hFuncSet: HCRYPTOIDFUNCSET; dwEncodingType: DWORD;
pwszDllList: LPWSTR; pcchDllList: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptGetDefaultOIDDllList}
//+-------------------------------------------------------------------------
// Either: get the first or next installed DEFAULT function OR
// load the Dll containing the DEFAULT function.
//
// If pwszDll is NULL, search the list of installed DEFAULT functions.
// *phFuncAddr must be set to NULL to get the first installed function.
// Successive installed functions are returned by setting *phFuncAddr
// to the hFuncAddr returned by the previous call.
//
// If pwszDll is NULL, the input *phFuncAddr
// is always CryptFreeOIDFunctionAddress'ed by this function, even for
// an error.
//
// If pwszDll isn't NULL, then, attempts to load the Dll and the DEFAULT
// function. *phFuncAddr is ignored upon entry and isn't
// CryptFreeOIDFunctionAddress'ed.
//
// For success, returns TRUE with *ppvFuncAddr updated with the function's
// address and *phFuncAddr updated with the function address's handle.
// The function's handle is AddRef'ed. CryptFreeOIDFunctionAddress needs to
// be called to release it or CryptGetDefaultOIDFunctionAddress can also
// be called for a NULL pwszDll.
//--------------------------------------------------------------------------
function CryptGetDefaultOIDFunctionAddress(hFuncSet: HCRYPTOIDFUNCSET;
dwEncodingType: DWORD; pwszDll: LPCWSTR; dwFlags: DWORD;
var ppvFuncAddr: Pointer; phFuncAddr: HCRYPTOIDFUNCADDR): BOOL; stdcall;
{$EXTERNALSYM CryptGetDefaultOIDFunctionAddress}
//+-------------------------------------------------------------------------
// Releases the handle AddRef'ed and returned by CryptGetOIDFunctionAddress
// or CryptGetDefaultOIDFunctionAddress.
//
// If a Dll was loaded for the function its unloaded. However, before doing
// the unload, the DllCanUnloadNow function exported by the loaded Dll is
// called. It should return S_FALSE to inhibit the unload or S_TRUE to enable
// the unload. If the Dll doesn't export DllCanUnloadNow, the Dll is unloaded.
//
// DllCanUnloadNow has the following signature:
// STDAPI DllCanUnloadNow(void);
//--------------------------------------------------------------------------
function CryptFreeOIDFunctionAddress(hFuncAddr: HCRYPTOIDFUNCADDR; dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptFreeOIDFunctionAddress}
//+-------------------------------------------------------------------------
// Register the Dll containing the function to be called for the specified
// encoding type, function name and OID.
//
// pwszDll may contain environment-variable strings
// which are ExpandEnvironmentStrings()'ed before loading the Dll.
//
// In addition to registering the DLL, you may override the
// name of the function to be called. For example,
// pszFuncName = "CryptDllEncodeObject",
// pszOverrideFuncName = "MyEncodeXyz".
// This allows a Dll to export multiple OID functions for the same
// function name without needing to interpose its own OID dispatcher function.
//--------------------------------------------------------------------------
function CryptRegisterOIDFunction(dwEncodingType: DWORD; pszFuncName: LPCSTR;
pszOID: LPCSTR; pwszDll: LPCWSTR; pszOverrideFuncName: LPCSTR): BOOL; stdcall;
{$EXTERNALSYM CryptRegisterOIDFunction}
//+-------------------------------------------------------------------------
// Unregister the Dll containing the function to be called for the specified
// encoding type, function name and OID.
//--------------------------------------------------------------------------
function CryptUnregisterOIDFunction(dwEncodingType: DWORD; pszFuncName: LPCSTR;
pszOID: LPCSTR): BOOL; stdcall;
{$EXTERNALSYM CryptUnregisterOIDFunction}
//+-------------------------------------------------------------------------
// Register the Dll containing the default function to be called for the
// specified encoding type and function name.
//
// Unlike CryptRegisterOIDFunction, you can't override the function name
// needing to be exported by the Dll.
//
// The Dll is inserted before the entry specified by dwIndex.
// dwIndex == 0, inserts at the beginning.
// dwIndex == CRYPT_REGISTER_LAST_INDEX, appends at the end.
//
// pwszDll may contain environment-variable strings
// which are ExpandEnvironmentStrings()'ed before loading the Dll.
//--------------------------------------------------------------------------
function CryptRegisterDefaultOIDFunction(dwEncodingType: DWORD; pszFuncName: LPCSTR;
dwIndex: DWORD; pwszDll: LPCWSTR): BOOL; stdcall;
{$EXTERNALSYM CryptRegisterDefaultOIDFunction}
const
CRYPT_REGISTER_FIRST_INDEX = 0;
{$EXTERNALSYM CRYPT_REGISTER_FIRST_INDEX}
CRYPT_REGISTER_LAST_INDEX = DWORD($FFFFFFFF);
{$EXTERNALSYM CRYPT_REGISTER_LAST_INDEX}
//+-------------------------------------------------------------------------
// Unregister the Dll containing the default function to be called for
// the specified encoding type and function name.
//--------------------------------------------------------------------------
function CryptUnregisterDefaultOIDFunction(dwEncodingType: DWORD;
pszFuncName: LPCSTR; pwszDll: LPCWSTR): BOOL; stdcall;
{$EXTERNALSYM CryptUnregisterDefaultOIDFunction}
//+-------------------------------------------------------------------------
// Set the value for the specified encoding type, function name, OID and
// value name.
//
// See RegSetValueEx for the possible value types.
//
// String types are UNICODE.
//--------------------------------------------------------------------------
function CryptSetOIDFunctionValue(dwEncodingType: DWORD; pszFuncName: LPCSTR;
pszOID: LPCSTR; pwszValueName: LPCWSTR; dwValueType: DWORD; pbValueData: LPBYTE;
cbValueData: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptSetOIDFunctionValue}
//+-------------------------------------------------------------------------
// Get the value for the specified encoding type, function name, OID and
// value name.
//
// See RegEnumValue for the possible value types.
//
// String types are UNICODE.
//--------------------------------------------------------------------------
function CryptGetOIDFunctionValue(dwEncodingType: DWORD; pszFuncName: LPCSTR;
pszOID: LPCSTR; pwszValueName: LPCWSTR; var pdwValueType: DWORD;
pbValueData: LPBYTE; var pcbValueData: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptGetOIDFunctionValue}
type
PFN_CRYPT_ENUM_OID_FUNC = function(dwEncodingType: DWORD; pszFuncName,
pszOID: LPCSTR; cValue: DWORD; rgdwValueType: LPDWORD;
rgpwszValueName: LPCWSTR; rgpbValueData: LPBYTE; rgcbValueData: LPDWORD;
pvArg: Pointer): BOOL; stdcall;
{$EXTERNALSYM PFN_CRYPT_ENUM_OID_FUNC}
PFnCryptEnumOidFunc = PFN_CRYPT_ENUM_OID_FUNC;
//+-------------------------------------------------------------------------
// Enumerate the OID functions identified by their encoding type,
// function name and OID.
//
// pfnEnumOIDFunc is called for each registry key matching the input
// parameters. Setting dwEncodingType to CRYPT_MATCH_ANY_ENCODING_TYPE matches
// any. Setting pszFuncName or pszOID to NULL matches any.
//
// Set pszOID == CRYPT_DEFAULT_OID to restrict the enumeration to only the
// DEFAULT functions
//
// String types are UNICODE.
//--------------------------------------------------------------------------
function CryptEnumOIDFunction(dwEncodingType: DWORD; pszFuncName, pszOID: LPCSTR;
dwFlags: DWORD; pvArg: Pointer; pfnEnumOIDFunc: PFN_CRYPT_ENUM_OID_FUNC): BOOL; stdcall;
{$EXTERNALSYM CryptEnumOIDFunction}
const
CRYPT_MATCH_ANY_ENCODING_TYPE = DWORD($FFFFFFFF);
{$EXTERNALSYM CRYPT_MATCH_ANY_ENCODING_TYPE}
//+=========================================================================
// Object IDentifier (OID) Information: Data Structures and APIs
//==========================================================================
//+-------------------------------------------------------------------------
// OID Information
//--------------------------------------------------------------------------
type
PCRYPT_OID_INFO = ^CRYPT_OID_INFO;
{$EXTERNALSYM PCRYPT_OID_INFO}
_CRYPT_OID_INFO = record
cbSize: DWORD;
pszOID: LPCSTR;
pwszName: LPCWSTR;
dwGroupId: DWORD;
Union: record
case Integer of
0: (dwValue: DWORD);
1: (Algid: ALG_ID);
2: (dwLength: DWORD);
end;
ExtraInfo: CRYPT_DATA_BLOB;
end;
{$EXTERNALSYM _CRYPT_OID_INFO}
CRYPT_OID_INFO = _CRYPT_OID_INFO;
{$EXTERNALSYM CRYPT_OID_INFO}
TCryptOidInfo = CRYPT_OID_INFO;
PCryptOidInfo = PCRYPT_OID_INFO;
CCRYPT_OID_INFO = CRYPT_OID_INFO;
{$EXTERNALSYM CCRYPT_OID_INFO}
PCCRYPT_OID_INFO = PCRYPT_OID_INFO;
{$EXTERNALSYM PCCRYPT_OID_INFO}
//+-------------------------------------------------------------------------
// OID Group IDs
//--------------------------------------------------------------------------
const
CRYPT_HASH_ALG_OID_GROUP_ID = 1;
{$EXTERNALSYM CRYPT_HASH_ALG_OID_GROUP_ID}
CRYPT_ENCRYPT_ALG_OID_GROUP_ID = 2;
{$EXTERNALSYM CRYPT_ENCRYPT_ALG_OID_GROUP_ID}
CRYPT_PUBKEY_ALG_OID_GROUP_ID = 3;
{$EXTERNALSYM CRYPT_PUBKEY_ALG_OID_GROUP_ID}
CRYPT_SIGN_ALG_OID_GROUP_ID = 4;
{$EXTERNALSYM CRYPT_SIGN_ALG_OID_GROUP_ID}
CRYPT_RDN_ATTR_OID_GROUP_ID = 5;
{$EXTERNALSYM CRYPT_RDN_ATTR_OID_GROUP_ID}
CRYPT_EXT_OR_ATTR_OID_GROUP_ID = 6;
{$EXTERNALSYM CRYPT_EXT_OR_ATTR_OID_GROUP_ID}
CRYPT_ENHKEY_USAGE_OID_GROUP_ID = 7;
{$EXTERNALSYM CRYPT_ENHKEY_USAGE_OID_GROUP_ID}
CRYPT_POLICY_OID_GROUP_ID = 8;
{$EXTERNALSYM CRYPT_POLICY_OID_GROUP_ID}
CRYPT_LAST_OID_GROUP_ID = 8;
{$EXTERNALSYM CRYPT_LAST_OID_GROUP_ID}
CRYPT_FIRST_ALG_OID_GROUP_ID = CRYPT_HASH_ALG_OID_GROUP_ID;
{$EXTERNALSYM CRYPT_FIRST_ALG_OID_GROUP_ID}
CRYPT_LAST_ALG_OID_GROUP_ID = CRYPT_SIGN_ALG_OID_GROUP_ID;
{$EXTERNALSYM CRYPT_LAST_ALG_OID_GROUP_ID}
// The CRYPT_*_ALG_OID_GROUP_ID's have an Algid. The CRYPT_RDN_ATTR_OID_GROUP_ID
// has a dwLength. The CRYPT_EXT_OR_ATTR_OID_GROUP_ID,
// CRYPT_ENHKEY_USAGE_OID_GROUP_ID or CRYPT_POLICY_OID_GROUP_ID don't have a
// dwValue.
//
// CRYPT_PUBKEY_ALG_OID_GROUP_ID has the following optional ExtraInfo:
// DWORD[0] - Flags. CRYPT_OID_INHIBIT_SIGNATURE_FORMAT_FLAG can be set to
// inhibit the reformatting of the signature before
// CryptVerifySignature is called or after CryptSignHash
// is called. CRYPT_OID_USE_PUBKEY_PARA_FOR_PKCS7_FLAG can
// be set to include the public key algorithm's parameters
// in the PKCS7's digestEncryptionAlgorithm's parameters.
// CRYPT_OID_NO_NULL_ALGORITHM_PARA_FLAG can be set to omit
// NULL parameters when encoding.
CRYPT_OID_INHIBIT_SIGNATURE_FORMAT_FLAG = $1;
{$EXTERNALSYM CRYPT_OID_INHIBIT_SIGNATURE_FORMAT_FLAG}
CRYPT_OID_USE_PUBKEY_PARA_FOR_PKCS7_FLAG = $2;
{$EXTERNALSYM CRYPT_OID_USE_PUBKEY_PARA_FOR_PKCS7_FLAG}
CRYPT_OID_NO_NULL_ALGORITHM_PARA_FLAG = $4;
{$EXTERNALSYM CRYPT_OID_NO_NULL_ALGORITHM_PARA_FLAG}
// CRYPT_SIGN_ALG_OID_GROUP_ID has the following optional ExtraInfo:
// DWORD[0] - Public Key Algid.
// DWORD[1] - Flags. Same as above for CRYPT_PUBKEY_ALG_OID_GROUP_ID.
// DWORD[2] - Optional CryptAcquireContext(CRYPT_VERIFYCONTEXT)'s dwProvType.
// If omitted or 0, uses Public Key Algid to select
// appropriate dwProvType for signature verification.
// CRYPT_RDN_ATTR_OID_GROUP_ID has the following optional ExtraInfo:
// Array of DWORDs:
// [0 ..] - Null terminated list of acceptable RDN attribute
// value types. An empty list implies CERT_RDN_PRINTABLE_STRING,
// CERT_RDN_UNICODE_STRING, 0.
//+-------------------------------------------------------------------------
// Find OID information. Returns NULL if unable to find any information
// for the specified key and group. Note, returns a pointer to a constant
// data structure. The returned pointer MUST NOT be freed.
//
// dwKeyType's:
// CRYPT_OID_INFO_OID_KEY, pvKey points to a szOID
// CRYPT_OID_INFO_NAME_KEY, pvKey points to a wszName
// CRYPT_OID_INFO_ALGID_KEY, pvKey points to an ALG_ID
// CRYPT_OID_INFO_SIGN_KEY, pvKey points to an array of two ALG_ID's:
// ALG_ID[0] - Hash Algid
// ALG_ID[1] - PubKey Algid
//
// Setting dwGroupId to 0, searches all groups according to the dwKeyType.
// Otherwise, only the dwGroupId is searched.
//--------------------------------------------------------------------------
function CryptFindOIDInfo(dwKeyType: DWORD; pvKey: Pointer; dwGroupId: DWORD): PCCRYPT_OID_INFO; stdcall;
{$EXTERNALSYM CryptFindOIDInfo}
const
CRYPT_OID_INFO_OID_KEY = 1;
{$EXTERNALSYM CRYPT_OID_INFO_OID_KEY}
CRYPT_OID_INFO_NAME_KEY = 2;
{$EXTERNALSYM CRYPT_OID_INFO_NAME_KEY}
CRYPT_OID_INFO_ALGID_KEY = 3;
{$EXTERNALSYM CRYPT_OID_INFO_ALGID_KEY}
CRYPT_OID_INFO_SIGN_KEY = 4;
{$EXTERNALSYM CRYPT_OID_INFO_SIGN_KEY}
//+-------------------------------------------------------------------------
// Register OID information. The OID information specified in the
// CCRYPT_OID_INFO structure is persisted to the registry.
//
// crypt32.dll contains information for the commonly known OIDs. This function
// allows applications to augment crypt32.dll's OID information. During
// CryptFindOIDInfo's first call, the registered OID information is installed.
//
// By default the registered OID information is installed after crypt32.dll's
// OID entries. Set CRYPT_INSTALL_OID_INFO_BEFORE_FLAG to install before.
//--------------------------------------------------------------------------
function CryptRegisterOIDInfo(pInfo: PCCRYPT_OID_INFO; dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptRegisterOIDInfo}
const
CRYPT_INSTALL_OID_INFO_BEFORE_FLAG = 1;
{$EXTERNALSYM CRYPT_INSTALL_OID_INFO_BEFORE_FLAG}
//+-------------------------------------------------------------------------
// Unregister OID information. Only the pszOID and dwGroupId fields are
// used to identify the OID information to be unregistered.
//--------------------------------------------------------------------------
function CryptUnregisterOIDInfo(pInfo: PCCRYPT_OID_INFO): BOOL; stdcall;
{$EXTERNALSYM CryptUnregisterOIDInfo}
// If the callback returns FALSE, stops the enumeration.
type
PFN_CRYPT_ENUM_OID_INFO = function(pInfo: PCCRYPT_OID_INFO; pvArg: Pointer): BOOL; stdcall;
{$EXTERNALSYM PFN_CRYPT_ENUM_OID_INFO}
PFnCryptEnumOidInfo = PFN_CRYPT_ENUM_OID_INFO;
//+-------------------------------------------------------------------------
// Enumerate the OID information.
//
// pfnEnumOIDInfo is called for each OID information entry.
//
// Setting dwGroupId to 0 matches all groups. Otherwise, only enumerates
// entries in the specified group.
//
// dwFlags currently isn't used and must be set to 0.
//--------------------------------------------------------------------------
function CryptEnumOIDInfo(dwGroupId: DWORD; dwFlags: DWORD; pvArg: Pointer;
pfnEnumOIDInfo: PFN_CRYPT_ENUM_OID_INFO): BOOL; stdcall;
{$EXTERNALSYM CryptEnumOIDInfo}
//+-------------------------------------------------------------------------
// Find the localized name for the specified name. For example, find the
// localized name for the "Root" system store name. A case insensitive
// string comparison is done.
//
// Returns NULL if unable to find the the specified name.
//
// Localized names for the predefined system stores ("Root", "My") and
// predefined physical stores (".Default", ".LocalMachine") are pre-installed
// as resource strings in crypt32.dll. CryptSetOIDFunctionValue can be called
// as follows to register additional localized strings:
// dwEncodingType = CRYPT_LOCALIZED_NAME_ENCODING_TYPE
// pszFuncName = CRYPT_OID_FIND_LOCALIZED_NAME_FUNC
// pszOID = CRYPT_LOCALIZED_NAME_OID
// pwszValueName = Name to be localized, for example, L"ApplicationStore"
// dwValueType = REG_SZ
// pbValueData = pointer to the UNICODE localized string
// cbValueData = (wcslen(UNICODE localized string) + 1) * sizeof(WCHAR)
//
// To unregister, set pbValueData to NULL and cbValueData to 0.
//
// The registered names are searched before the pre-installed names.
//--------------------------------------------------------------------------
function CryptFindLocalizedName(pwszCryptName: LPCWSTR): LPCWSTR; stdcall;
{$EXTERNALSYM CryptFindLocalizedName}
const
CRYPT_LOCALIZED_NAME_ENCODING_TYPE = 0;
{$EXTERNALSYM CRYPT_LOCALIZED_NAME_ENCODING_TYPE}
CRYPT_LOCALIZED_NAME_OID = 'LocalizedNames';
{$EXTERNALSYM CRYPT_LOCALIZED_NAME_OID}
//+=========================================================================
// Low Level Cryptographic Message Data Structures and APIs
//==========================================================================
type
HCRYPTMSG = Pointer;
{$EXTERNALSYM HCRYPTMSG}
PHCRYPTMSG = ^HCRYPTMSG;
{$NODEFINE PHCRYPTMSG}
const
szOID_PKCS_7_DATA = '1.2.840.113549.1.7.1';
{$EXTERNALSYM szOID_PKCS_7_DATA}
szOID_PKCS_7_SIGNED = '1.2.840.113549.1.7.2';
{$EXTERNALSYM szOID_PKCS_7_SIGNED}
szOID_PKCS_7_ENVELOPED = '1.2.840.113549.1.7.3';
{$EXTERNALSYM szOID_PKCS_7_ENVELOPED}
szOID_PKCS_7_SIGNEDANDENVELOPED = '1.2.840.113549.1.7.4';
{$EXTERNALSYM szOID_PKCS_7_SIGNEDANDENVELOPED}
szOID_PKCS_7_DIGESTED = '1.2.840.113549.1.7.5';
{$EXTERNALSYM szOID_PKCS_7_DIGESTED}
szOID_PKCS_7_ENCRYPTED = '1.2.840.113549.1.7.6';
{$EXTERNALSYM szOID_PKCS_7_ENCRYPTED}
szOID_PKCS_9_CONTENT_TYPE = '1.2.840.113549.1.9.3';
{$EXTERNALSYM szOID_PKCS_9_CONTENT_TYPE}
szOID_PKCS_9_MESSAGE_DIGEST = '1.2.840.113549.1.9.4';
{$EXTERNALSYM szOID_PKCS_9_MESSAGE_DIGEST}
//+-------------------------------------------------------------------------
// Message types
//--------------------------------------------------------------------------
CMSG_DATA = 1;
{$EXTERNALSYM CMSG_DATA}
CMSG_SIGNED = 2;
{$EXTERNALSYM CMSG_SIGNED}
CMSG_ENVELOPED = 3;
{$EXTERNALSYM CMSG_ENVELOPED}
CMSG_SIGNED_AND_ENVELOPED = 4;
{$EXTERNALSYM CMSG_SIGNED_AND_ENVELOPED}
CMSG_HASHED = 5;
{$EXTERNALSYM CMSG_HASHED}
CMSG_ENCRYPTED = 6;
{$EXTERNALSYM CMSG_ENCRYPTED}
//+-------------------------------------------------------------------------
// Message Type Bit Flags
//--------------------------------------------------------------------------
CMSG_ALL_FLAGS = not 0;
{$EXTERNALSYM CMSG_ALL_FLAGS}
CMSG_DATA_FLAG = 1 shl CMSG_DATA;
{$EXTERNALSYM CMSG_DATA_FLAG}
CMSG_SIGNED_FLAG = 1 shl CMSG_SIGNED;
{$EXTERNALSYM CMSG_SIGNED_FLAG}
CMSG_ENVELOPED_FLAG = 1 shl CMSG_ENVELOPED;
{$EXTERNALSYM CMSG_ENVELOPED_FLAG}
CMSG_SIGNED_AND_ENVELOPED_FLAG = 1 shl CMSG_SIGNED_AND_ENVELOPED;
{$EXTERNALSYM CMSG_SIGNED_AND_ENVELOPED_FLAG}
CMSG_HASHED_FLAG = 1 shl CMSG_HASHED;
{$EXTERNALSYM CMSG_HASHED_FLAG}
CMSG_ENCRYPTED_FLAG = 1 shl CMSG_ENCRYPTED;
{$EXTERNALSYM CMSG_ENCRYPTED_FLAG}
//+-------------------------------------------------------------------------
// Certificate Issuer and SerialNumber
//--------------------------------------------------------------------------
type
PCERT_ISSUER_SERIAL_NUMBER = ^CERT_ISSUER_SERIAL_NUMBER;
{$EXTERNALSYM PCERT_ISSUER_SERIAL_NUMBER}
_CERT_ISSUER_SERIAL_NUMBER = record
Issuer: CERT_NAME_BLOB;
SerialNumber: CRYPT_INTEGER_BLOB;
end;
{$EXTERNALSYM _CERT_ISSUER_SERIAL_NUMBER}
CERT_ISSUER_SERIAL_NUMBER = _CERT_ISSUER_SERIAL_NUMBER;
{$EXTERNALSYM CERT_ISSUER_SERIAL_NUMBER}
TCertIssuerSerialNumber = CERT_ISSUER_SERIAL_NUMBER;
PCertIssuerSerialNumber = PCERT_ISSUER_SERIAL_NUMBER;
//+-------------------------------------------------------------------------
// Certificate Identifier
//--------------------------------------------------------------------------
PCERT_ID = ^CERT_ID;
{$EXTERNALSYM PCERT_ID}
_CERT_ID = record
dwIdChoice: DWORD;
case Integer of
// CERT_ID_ISSUER_SERIAL_NUMBER
0: (IssuerSerialNumber: CERT_ISSUER_SERIAL_NUMBER);
// CERT_ID_KEY_IDENTIFIER
1: (KeyId: CRYPT_HASH_BLOB);
// CERT_ID_SHA1_HASH
2: (HashId: CRYPT_HASH_BLOB);
end;
{$EXTERNALSYM _CERT_ID}
CERT_ID = _CERT_ID;
{$EXTERNALSYM CERT_ID}
TCertId = CERT_ID;
PCertId = PCERT_ID;
const
CERT_ID_ISSUER_SERIAL_NUMBER = 1;
{$EXTERNALSYM CERT_ID_ISSUER_SERIAL_NUMBER}
CERT_ID_KEY_IDENTIFIER = 2;
{$EXTERNALSYM CERT_ID_KEY_IDENTIFIER}
CERT_ID_SHA1_HASH = 3;
{$EXTERNALSYM CERT_ID_SHA1_HASH}
//+-------------------------------------------------------------------------
// The message encode information (pvMsgEncodeInfo) is message type dependent
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_DATA: pvMsgEncodeInfo = NULL
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_SIGNED
//
// The pCertInfo in the CMSG_SIGNER_ENCODE_INFO provides the Issuer, SerialNumber
// and PublicKeyInfo.Algorithm. The PublicKeyInfo.Algorithm implicitly
// specifies the HashEncryptionAlgorithm to be used.
//
// If the SignerId is present with a nonzero dwIdChoice its used instead
// of the Issuer and SerialNumber in pCertInfo.
//
// CMS supports the KEY_IDENTIFIER and ISSUER_SERIAL_NUMBER CERT_IDs. PKCS #7
// version 1.5 only supports the ISSUER_SERIAL_NUMBER CERT_ID choice.
//
// If HashEncryptionAlgorithm is present and not NULL its used instead of
// the PublicKeyInfo.Algorithm.
//
// Note, for RSA, the hash encryption algorithm is normally the same as
// the public key algorithm. For DSA, the hash encryption algorithm is
// normally a DSS signature algorithm.
//
// pvHashEncryptionAuxInfo currently isn't used and must be set to NULL if
// present in the data structure.
//
// The hCryptProv and dwKeySpec specify the private key to use. If dwKeySpec
// == 0, then, defaults to AT_SIGNATURE.
//
// If CMSG_CRYPT_RELEASE_CONTEXT_FLAG is set in the dwFlags
// passed to CryptMsgOpenToEncode(), the signer hCryptProv's are released.
//
// pvHashAuxInfo currently isn't used and must be set to NULL.
//
// CMS signed messages allow the inclusion of Attribute Certs.
//--------------------------------------------------------------------------
type
PCMSG_SIGNER_ENCODE_INFO = ^CMSG_SIGNER_ENCODE_INFO;
{$EXTERNALSYM PCMSG_SIGNER_ENCODE_INFO}
_CMSG_SIGNER_ENCODE_INFO = record
cbSize: DWORD;
pCertInfo: PCERT_INFO;
hCryptProv: HCRYPTPROV;
dwKeySpec: DWORD;
HashAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
pvHashAuxInfo: Pointer;
cAuthAttr: DWORD;
rgAuthAttr: PCRYPT_ATTRIBUTE;
cUnauthAttr: DWORD;
rgUnauthAttr: PCRYPT_ATTRIBUTE;
{$IFDEF CMSG_SIGNER_ENCODE_INFO_HAS_CMS_FIELDS}
SignerId: CERT_ID;
HashEncryptionAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
pvHashEncryptionAuxInfo: Pointer;
{$ENDIF CMSG_SIGNER_ENCODE_INFO_HAS_CMS_FIELDS}
end;
{$EXTERNALSYM _CMSG_SIGNER_ENCODE_INFO}
CMSG_SIGNER_ENCODE_INFO = _CMSG_SIGNER_ENCODE_INFO;
{$EXTERNALSYM CMSG_SIGNER_ENCODE_INFO}
TCmsgSignerEncodeInfo = CMSG_SIGNER_ENCODE_INFO;
PCmsgSignerEncodeInfo = PCMSG_SIGNER_ENCODE_INFO;
PCMSG_SIGNED_ENCODE_INFO = ^CMSG_SIGNED_ENCODE_INFO;
{$EXTERNALSYM PCMSG_SIGNED_ENCODE_INFO}
_CMSG_SIGNED_ENCODE_INFO = record
cbSize: DWORD;
cSigners: DWORD;
rgSigners: PCMSG_SIGNER_ENCODE_INFO;
cCertEncoded: DWORD;
rgCertEncoded: PCERT_BLOB;
cCrlEncoded: DWORD;
rgCrlEncoded: PCRL_BLOB;
{$IFDEF CMSG_SIGNED_ENCODE_INFO_HAS_CMS_FIELDS}
cAttrCertEncoded: DWORD;
rgAttrCertEncoded: PCERT_BLOB;
{$ENDIF CMSG_SIGNED_ENCODE_INFO_HAS_CMS_FIELDS}
end;
{$EXTERNALSYM _CMSG_SIGNED_ENCODE_INFO}
CMSG_SIGNED_ENCODE_INFO = _CMSG_SIGNED_ENCODE_INFO;
{$EXTERNALSYM CMSG_SIGNED_ENCODE_INFO}
TCmsgSignedEncodeInfo = CMSG_SIGNED_ENCODE_INFO;
PCmsgSignedEncodeInfo = PCMSG_SIGNED_ENCODE_INFO;
//+-------------------------------------------------------------------------
// CMSG_ENVELOPED
//
// The PCERT_INFO for the rgRecipients provides the Issuer, SerialNumber
// and PublicKeyInfo. The PublicKeyInfo.Algorithm implicitly
// specifies the KeyEncryptionAlgorithm to be used.
//
// The PublicKeyInfo.PublicKey in PCERT_INFO is used to encrypt the content
// encryption key for the recipient.
//
// hCryptProv is used to do the content encryption, recipient key encryption
// and export. The hCryptProv's private keys aren't used. If hCryptProv
// is NULL, a default hCryptProv is chosen according to the
// ContentEncryptionAlgorithm and the first recipient KeyEncryptionAlgorithm.
//
// If CMSG_CRYPT_RELEASE_CONTEXT_FLAG is set in the dwFlags
// passed to CryptMsgOpenToEncode(), the envelope's hCryptProv is released.
//
// Note: CAPI currently doesn't support more than one KeyEncryptionAlgorithm
// per provider. This will need to be fixed.
//
// Currently, pvEncryptionAuxInfo is only defined for RC2 or RC4 encryption
// algorithms. Otherwise, its not used and must be set to NULL.
// See CMSG_RC2_AUX_INFO for the RC2 encryption algorithms.
// See CMSG_RC4_AUX_INFO for the RC4 encryption algorithms.
//
// To enable SP3 compatible encryption, pvEncryptionAuxInfo should point to
// a CMSG_SP3_COMPATIBLE_AUX_INFO data structure.
//
// To enable the CMS envelope enhancements, rgpRecipients must be set to
// NULL, and rgCmsRecipients updated to point to an array of
// CMSG_RECIPIENT_ENCODE_INFO's.
//
// Also, CMS envelope enhancements support the inclusion of a bag of
// Certs, CRLs, Attribute Certs and/or Unprotected Attributes.
//--------------------------------------------------------------------------
type
PCMSG_ENVELOPED_ENCODE_INFO = ^CMSG_ENVELOPED_ENCODE_INFO;
{$EXTERNALSYM PCMSG_ENVELOPED_ENCODE_INFO}
_CMSG_ENVELOPED_ENCODE_INFO = record
cbSize: DWORD;
hCryptProv: HCRYPTPROV;
ContentEncryptionAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
pvEncryptionAuxInfo: Pointer;
cRecipients: DWORD;
// The following array may only be used for transport recipients identified
// by their IssuereAndSerialNumber. If rgpRecipients != NULL, then,
// the rgCmsRecipients must be NULL.
rgpRecipients: PCERT_INFO;
{$IFDEF CMSG_ENVELOPED_ENCODE_INFO_HAS_CMS_FIELDS}
// If rgCmsRecipients != NULL, then, the above rgpRecipients must be
// NULL.
rgCmsRecipients: PCMSG_RECIPIENT_ENCODE_INFO;
cCertEncoded: DWORD;
rgCertEncoded: PCERT_BLOB;
cCrlEncoded: DWORD;
rgCrlEncoded: PCRL_BLOB;
cAttrCertEncoded: DWORD;
rgAttrCertEncoded: PCERT_BLOB;
cUnprotectedAttr: DWORD;
rgUnprotectedAttr: PCRYPT_ATTRIBUTE;
{$ENDIF CMSG_ENVELOPED_ENCODE_INFO_HAS_CMS_FIELDS}
end;
{$EXTERNALSYM _CMSG_ENVELOPED_ENCODE_INFO}
CMSG_ENVELOPED_ENCODE_INFO = _CMSG_ENVELOPED_ENCODE_INFO;
{$EXTERNALSYM CMSG_ENVELOPED_ENCODE_INFO}
TCmsgEnvelopedEncodeInfo = CMSG_ENVELOPED_ENCODE_INFO;
PCmsgEnvelopedEncodeInfo = PCMSG_ENVELOPED_ENCODE_INFO;
//+-------------------------------------------------------------------------
// Key Transport Recipient Encode Info
//
// hCryptProv is used to do the recipient key encryption
// and export. The hCryptProv's private keys aren't used.
//
// If hCryptProv is NULL, then, the hCryptProv specified in
// CMSG_ENVELOPED_ENCODE_INFO is used.
//
// Note, even if CMSG_CRYPT_RELEASE_CONTEXT_FLAG is set in the dwFlags
// passed to CryptMsgOpenToEncode(), this hCryptProv isn't released.
//
// CMS supports the KEY_IDENTIFIER and ISSUER_SERIAL_NUMBER CERT_IDs. PKCS #7
// version 1.5 only supports the ISSUER_SERIAL_NUMBER CERT_ID choice.
//--------------------------------------------------------------------------
PCMSG_KEY_TRANS_RECIPIENT_ENCODE_INFO = ^CMSG_KEY_TRANS_RECIPIENT_ENCODE_INFO;
{$EXTERNALSYM PCMSG_KEY_TRANS_RECIPIENT_ENCODE_INFO}
_CMSG_KEY_TRANS_RECIPIENT_ENCODE_INFO = record
cbSize: DWORD;
KeyEncryptionAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
pvKeyEncryptionAuxInfo: Pointer;
hCryptProv: HCRYPTPROV;
RecipientPublicKey: CRYPT_BIT_BLOB;
RecipientId: CERT_ID;
end;
{$EXTERNALSYM _CMSG_KEY_TRANS_RECIPIENT_ENCODE_INFO}
CMSG_KEY_TRANS_RECIPIENT_ENCODE_INFO = _CMSG_KEY_TRANS_RECIPIENT_ENCODE_INFO;
{$EXTERNALSYM CMSG_KEY_TRANS_RECIPIENT_ENCODE_INFO}
TCmsgKeyTransRecipientEncodeInfo = CMSG_KEY_TRANS_RECIPIENT_ENCODE_INFO;
PCmsgKeyTransRecipientEncodeInfo = PCMSG_KEY_TRANS_RECIPIENT_ENCODE_INFO;
//+-------------------------------------------------------------------------
// Key Agreement Recipient Encode Info
//
// If hCryptProv is NULL, then, the hCryptProv specified in
// CMSG_ENVELOPED_ENCODE_INFO is used.
//
// For the CMSG_KEY_AGREE_STATIC_KEY_CHOICE, both the hCryptProv and
// dwKeySpec must be specified to select the sender's private key.
//
// Note, even if CMSG_CRYPT_RELEASE_CONTEXT_FLAG is set in the dwFlags
// passed to CryptMsgOpenToEncode(), this hCryptProv isn't released.
//
// CMS supports the KEY_IDENTIFIER and ISSUER_SERIAL_NUMBER CERT_IDs.
//
// There is 1 key choice, ephemeral originator. The originator's ephemeral
// key is generated using the public key algorithm parameters shared
// amongst all the recipients.
//
// There are 2 key choices: ephemeral originator or static sender. The
// originator's ephemeral key is generated using the public key algorithm
// parameters shared amongst all the recipients. For the static sender its
// private key is used. The hCryptProv and dwKeySpec specify the private key.
// The pSenderId identifies the certificate containing the sender's public key.
//
// Currently, pvKeyEncryptionAuxInfo isn't used and must be set to NULL.
//
// If KeyEncryptionAlgorithm.Parameters.cbData == 0, then, its Parameters
// are updated with the encoded KeyWrapAlgorithm.
//
// Currently, pvKeyWrapAuxInfo is only defined for algorithms with
// RC2. Otherwise, its not used and must be set to NULL.
// When set for RC2 algorithms, points to a CMSG_RC2_AUX_INFO containing
// the RC2 effective key length.
//
// Note, key agreement recipients are not supported in PKCS #7 version 1.5.
//--------------------------------------------------------------------------
PCMSG_RECIPIENT_ENCRYPTED_KEY_ENCODE_INFO = ^CMSG_RECIPIENT_ENCRYPTED_KEY_ENCODE_INFO;
{$EXTERNALSYM PCMSG_RECIPIENT_ENCRYPTED_KEY_ENCODE_INFO}
_CMSG_RECIPIENT_ENCRYPTED_KEY_ENCODE_INFO = record
cbSize: DWORD;
RecipientPublicKey: CRYPT_BIT_BLOB;
RecipientId: CERT_ID;
// Following fields are optional and only applicable to KEY_IDENTIFIER
// CERT_IDs.
Date: FILETIME;
pOtherAttr: PCRYPT_ATTRIBUTE_TYPE_VALUE;
end;
{$EXTERNALSYM _CMSG_RECIPIENT_ENCRYPTED_KEY_ENCODE_INFO}
CMSG_RECIPIENT_ENCRYPTED_KEY_ENCODE_INFO = _CMSG_RECIPIENT_ENCRYPTED_KEY_ENCODE_INFO;
{$EXTERNALSYM CMSG_RECIPIENT_ENCRYPTED_KEY_ENCODE_INFO}
TCmsgRecipientEncryptedKeyEncodeInfo = CMSG_RECIPIENT_ENCRYPTED_KEY_ENCODE_INFO;
PCmsgRecipientEncryptedKeyEncodeInfo = PCMSG_RECIPIENT_ENCRYPTED_KEY_ENCODE_INFO;
PCMSG_KEY_AGREE_RECIPIENT_ENCODE_INFO = ^CMSG_KEY_AGREE_RECIPIENT_ENCODE_INFO;
{$EXTERNALSYM PCMSG_KEY_AGREE_RECIPIENT_ENCODE_INFO}
_CMSG_KEY_AGREE_RECIPIENT_ENCODE_INFO = record
cbSize: DWORD;
KeyEncryptionAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
pvKeyEncryptionAuxInfo: Pointer;
KeyWrapAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
pvKeyWrapAuxInfo: Pointer;
// The following hCryptProv and dwKeySpec must be specified for the
// CMSG_KEY_AGREE_STATIC_KEY_CHOICE.
//
// For CMSG_KEY_AGREE_EPHEMERAL_KEY_CHOICE, dwKeySpec isn't applicable
// and hCryptProv is optional.
hCryptProv: HCRYPTPROV;
dwKeySpec: DWORD;
dwKeyChoice: DWORD;
Union: record
case Integer of
// CMSG_KEY_AGREE_EPHEMERAL_KEY_CHOICE
//
// The ephemeral public key algorithm and parameters.
0: (pEphemeralAlgorithm: PCRYPT_ALGORITHM_IDENTIFIER);
// CMSG_KEY_AGREE_STATIC_KEY_CHOICE
//
// The CertId of the sender's certificate
1: (pSenderId: PCERT_ID);
end;
UserKeyingMaterial: CRYPT_DATA_BLOB; // OPTIONAL
cRecipientEncryptedKeys: DWORD;
rgpRecipientEncryptedKeys: PCMSG_RECIPIENT_ENCRYPTED_KEY_ENCODE_INFO;
end;
{$EXTERNALSYM _CMSG_KEY_AGREE_RECIPIENT_ENCODE_INFO}
CMSG_KEY_AGREE_RECIPIENT_ENCODE_INFO = _CMSG_KEY_AGREE_RECIPIENT_ENCODE_INFO;
{$EXTERNALSYM CMSG_KEY_AGREE_RECIPIENT_ENCODE_INFO}
TCmsgKeyAgreeRecipientEncodeInfo = CMSG_KEY_AGREE_RECIPIENT_ENCODE_INFO;
PCmsgKeyAgreeRecipientEncodeInfo = PCMSG_KEY_AGREE_RECIPIENT_ENCODE_INFO;
const
CMSG_KEY_AGREE_EPHEMERAL_KEY_CHOICE = 1;
{$EXTERNALSYM CMSG_KEY_AGREE_EPHEMERAL_KEY_CHOICE}
CMSG_KEY_AGREE_STATIC_KEY_CHOICE = 2;
{$EXTERNALSYM CMSG_KEY_AGREE_STATIC_KEY_CHOICE}
//+-------------------------------------------------------------------------
// Mail List Recipient Encode Info
//
// There is 1 choice for the KeyEncryptionKey: an already created CSP key
// handle. For the key handle choice, hCryptProv must be nonzero. This key
// handle isn't destroyed.
//
// Note, even if CMSG_CRYPT_RELEASE_CONTEXT_FLAG is set in the dwFlags
// passed to CryptMsgOpenToEncode(), this hCryptProv isn't released.
//
// Currently, pvKeyEncryptionAuxInfo is only defined for RC2 key wrap
// algorithms. Otherwise, its not used and must be set to NULL.
// When set for RC2 algorithms, points to a CMSG_RC2_AUX_INFO containing
// the RC2 effective key length.
//
// Note, mail list recipients are not supported in PKCS #7 version 1.5.
//--------------------------------------------------------------------------
type
PCMSG_MAIL_LIST_RECIPIENT_ENCODE_INFO = ^CMSG_MAIL_LIST_RECIPIENT_ENCODE_INFO;
{$EXTERNALSYM PCMSG_MAIL_LIST_RECIPIENT_ENCODE_INFO}
_CMSG_MAIL_LIST_RECIPIENT_ENCODE_INFO = record
cbSize: DWORD;
KeyEncryptionAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
pvKeyEncryptionAuxInfo: Pointer;
hCryptProv: HCRYPTPROV;
dwKeyChoice: DWORD;
Union: record
case Integer of
// CMSG_MAIL_LIST_HANDLE_KEY_CHOICE
0: (hKeyEncryptionKey: HCRYPTKEY);
// Reserve space for a potential pointer choice
1: (pvKeyEncryptionKey: Pointer);
end;
KeyId: CRYPT_DATA_BLOB;
// Following fields are optional.
Date: FILETIME;
pOtherAttr: PCRYPT_ATTRIBUTE_TYPE_VALUE;
end;
{$EXTERNALSYM _CMSG_MAIL_LIST_RECIPIENT_ENCODE_INFO}
CMSG_MAIL_LIST_RECIPIENT_ENCODE_INFO = _CMSG_MAIL_LIST_RECIPIENT_ENCODE_INFO;
{$EXTERNALSYM CMSG_MAIL_LIST_RECIPIENT_ENCODE_INFO}
TCmsgMailListRecipientEncodeInfo = CMSG_MAIL_LIST_RECIPIENT_ENCODE_INFO;
PCmsgMailListRecipientEncodeInfo = PCMSG_MAIL_LIST_RECIPIENT_ENCODE_INFO;
const
CMSG_MAIL_LIST_HANDLE_KEY_CHOICE = 1;
{$EXTERNALSYM CMSG_MAIL_LIST_HANDLE_KEY_CHOICE}
//+-------------------------------------------------------------------------
// Recipient Encode Info
//
// Note, only key transport recipients are supported in PKCS #7 version 1.5.
//--------------------------------------------------------------------------
type
PCMSG_RECIPIENT_ENCODE_INFO = ^CMSG_RECIPIENT_ENCODE_INFO;
{$NODEFINE PCMSG_RECIPIENT_ENCODE_INFO}
_CMSG_RECIPIENT_ENCODE_INFO = record
dwRecipientChoice: DWORD;
case Integer of
// CMSG_KEY_TRANS_RECIPIENT
0: (pKeyTrans: PCMSG_KEY_TRANS_RECIPIENT_ENCODE_INFO);
// CMSG_KEY_AGREE_RECIPIENT
1: (pKeyAgree: PCMSG_KEY_AGREE_RECIPIENT_ENCODE_INFO);
// CMSG_MAIL_LIST_RECIPIENT
2: (pMailList: PCMSG_MAIL_LIST_RECIPIENT_ENCODE_INFO);
end;
{$EXTERNALSYM _CMSG_RECIPIENT_ENCODE_INFO}
CMSG_RECIPIENT_ENCODE_INFO = _CMSG_RECIPIENT_ENCODE_INFO;
{$NODEFINE CMSG_RECIPIENT_ENCODE_INFO}
TCmsgRecipientEncodeInfo = CMSG_RECIPIENT_ENCODE_INFO;
PCmsgRecipientEncodeInfo = PCMSG_RECIPIENT_ENCODE_INFO;
const
CMSG_KEY_TRANS_RECIPIENT = 1;
{$EXTERNALSYM CMSG_KEY_TRANS_RECIPIENT}
CMSG_KEY_AGREE_RECIPIENT = 2;
{$EXTERNALSYM CMSG_KEY_AGREE_RECIPIENT}
CMSG_MAIL_LIST_RECIPIENT = 3;
{$EXTERNALSYM CMSG_MAIL_LIST_RECIPIENT}
//+-------------------------------------------------------------------------
// CMSG_RC2_AUX_INFO
//
// AuxInfo for RC2 encryption algorithms. The pvEncryptionAuxInfo field
// in CMSG_ENCRYPTED_ENCODE_INFO should be updated to point to this
// structure. If not specified, defaults to 40 bit.
//
// Note, this AuxInfo is only used when, the ContentEncryptionAlgorithm's
// Parameter.cbData is zero. Otherwise, the Parameters is decoded to
// get the bit length.
//
// If CMSG_SP3_COMPATIBLE_ENCRYPT_FLAG is set in dwBitLen, then, SP3
// compatible encryption is done and the bit length is ignored.
//--------------------------------------------------------------------------
type
PCMSG_RC2_AUX_INFO = ^CMSG_RC2_AUX_INFO;
{$EXTERNALSYM PCMSG_RC2_AUX_INFO}
_CMSG_RC2_AUX_INFO = record
cbSize: DWORD;
dwBitLen: DWORD;
end;
{$EXTERNALSYM _CMSG_RC2_AUX_INFO}
CMSG_RC2_AUX_INFO = _CMSG_RC2_AUX_INFO;
{$EXTERNALSYM CMSG_RC2_AUX_INFO}
TCmsgRc2AuxInfo = CMSG_RC2_AUX_INFO;
PCmsgRc2AuxInfo = PCMSG_RC2_AUX_INFO;
//+-------------------------------------------------------------------------
// CMSG_SP3_COMPATIBLE_AUX_INFO
//
// AuxInfo for enabling SP3 compatible encryption.
//
// The CMSG_SP3_COMPATIBLE_ENCRYPT_FLAG is set in dwFlags to enable SP3
// compatible encryption. When set, uses zero salt instead of no salt,
// the encryption algorithm parameters are NULL instead of containing the
// encoded RC2 parameters or encoded IV octet string and the encrypted
// symmetric key is encoded little endian instead of big endian.
//--------------------------------------------------------------------------
PCMSG_SP3_COMPATIBLE_AUX_INFO = ^CMSG_SP3_COMPATIBLE_AUX_INFO;
{$EXTERNALSYM PCMSG_SP3_COMPATIBLE_AUX_INFO}
_CMSG_SP3_COMPATIBLE_AUX_INFO = record
cbSize: DWORD;
dwFlags: DWORD;
end;
{$EXTERNALSYM _CMSG_SP3_COMPATIBLE_AUX_INFO}
CMSG_SP3_COMPATIBLE_AUX_INFO = _CMSG_SP3_COMPATIBLE_AUX_INFO;
{$EXTERNALSYM CMSG_SP3_COMPATIBLE_AUX_INFO}
TCmsgSp3CompatibleAuxInfo = CMSG_SP3_COMPATIBLE_AUX_INFO;
PCmsgSp3CompatibleAuxInfo = PCMSG_SP3_COMPATIBLE_AUX_INFO;
const
CMSG_SP3_COMPATIBLE_ENCRYPT_FLAG = DWORD($80000000);
{$EXTERNALSYM CMSG_SP3_COMPATIBLE_ENCRYPT_FLAG}
//+-------------------------------------------------------------------------
// CMSG_RC4_AUX_INFO
//
// AuxInfo for RC4 encryption algorithms. The pvEncryptionAuxInfo field
// in CMSG_ENCRYPTED_ENCODE_INFO should be updated to point to this
// structure. If not specified, uses the CSP's default bit length with no
// salt. Note, the base CSP has a 40 bit default and the enhanced CSP has
// a 128 bit default.
//
// If CMSG_RC4_NO_SALT_FLAG is set in dwBitLen, then, no salt is generated.
// Otherwise, (128 - dwBitLen)/8 bytes of salt are generated and encoded
// as an OCTET STRING in the algorithm parameters field.
//--------------------------------------------------------------------------
type
PCMSG_RC4_AUX_INFO = ^CMSG_RC4_AUX_INFO;
{$EXTERNALSYM PCMSG_RC4_AUX_INFO}
_CMSG_RC4_AUX_INFO = record
cbSize: DWORD;
dwBitLen: DWORD;
end;
{$EXTERNALSYM _CMSG_RC4_AUX_INFO}
CMSG_RC4_AUX_INFO = _CMSG_RC4_AUX_INFO;
{$EXTERNALSYM CMSG_RC4_AUX_INFO}
TCmsgRc4AuxInfo = CMSG_RC4_AUX_INFO;
PCmsgRc4AuxInfo = PCMSG_RC4_AUX_INFO;
const
CMSG_RC4_NO_SALT_FLAG = $40000000;
{$EXTERNALSYM CMSG_RC4_NO_SALT_FLAG}
//+-------------------------------------------------------------------------
// CMSG_SIGNED_AND_ENVELOPED
//
// For PKCS #7, a signed and enveloped message doesn't have the
// signer's authenticated or unauthenticated attributes. Otherwise, a
// combination of the CMSG_SIGNED_ENCODE_INFO and CMSG_ENVELOPED_ENCODE_INFO.
//--------------------------------------------------------------------------
type
PCMSG_SIGNED_AND_ENVELOPED_ENCODE_INFO = ^CMSG_SIGNED_AND_ENVELOPED_ENCODE_INFO;
{$EXTERNALSYM PCMSG_SIGNED_AND_ENVELOPED_ENCODE_INFO}
_CMSG_SIGNED_AND_ENVELOPED_ENCODE_INFO = record
cbSize: DWORD;
SignedInfo: CMSG_SIGNED_ENCODE_INFO;
EnvelopedInfo: CMSG_ENVELOPED_ENCODE_INFO;
end;
{$EXTERNALSYM _CMSG_SIGNED_AND_ENVELOPED_ENCODE_INFO}
CMSG_SIGNED_AND_ENVELOPED_ENCODE_INFO = _CMSG_SIGNED_AND_ENVELOPED_ENCODE_INFO;
{$EXTERNALSYM CMSG_SIGNED_AND_ENVELOPED_ENCODE_INFO}
TCmsgSignedAndEnvelopedEncodeInfo = CMSG_SIGNED_AND_ENVELOPED_ENCODE_INFO;
PCmsgSignedAndEnvelopedEncodeInfo = PCMSG_SIGNED_AND_ENVELOPED_ENCODE_INFO;
//+-------------------------------------------------------------------------
// CMSG_HASHED
//
// hCryptProv is used to do the hash. Doesn't need to use a private key.
//
// If CMSG_CRYPT_RELEASE_CONTEXT_FLAG is set in the dwFlags
// passed to CryptMsgOpenToEncode(), the hCryptProv is released.
//
// If fDetachedHash is set, then, the encoded message doesn't contain
// any content (its treated as NULL Data)
//
// pvHashAuxInfo currently isn't used and must be set to NULL.
//--------------------------------------------------------------------------
PCMSG_HASHED_ENCODE_INFO = ^CMSG_HASHED_ENCODE_INFO;
{$EXTERNALSYM PCMSG_HASHED_ENCODE_INFO}
_CMSG_HASHED_ENCODE_INFO = record
cbSize: DWORD;
hCryptProv: HCRYPTPROV;
HashAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
pvHashAuxInfo: Pointer;
end;
{$EXTERNALSYM _CMSG_HASHED_ENCODE_INFO}
CMSG_HASHED_ENCODE_INFO = _CMSG_HASHED_ENCODE_INFO;
{$EXTERNALSYM CMSG_HASHED_ENCODE_INFO}
TCmsgHashedEncodeInfo = CMSG_HASHED_ENCODE_INFO;
PCmsgHashedEncodeInfo = PCMSG_HASHED_ENCODE_INFO;
//+-------------------------------------------------------------------------
// CMSG_ENCRYPTED
//
// The key used to encrypt the message is identified outside of the message
// content (for example, password).
//
// The content input to CryptMsgUpdate has already been encrypted.
//
// pvEncryptionAuxInfo currently isn't used and must be set to NULL.
//--------------------------------------------------------------------------
PCMSG_ENCRYPTED_ENCODE_INFO = ^CMSG_ENCRYPTED_ENCODE_INFO;
{$EXTERNALSYM PCMSG_ENCRYPTED_ENCODE_INFO}
_CMSG_ENCRYPTED_ENCODE_INFO = record
cbSize: DWORD;
ContentEncryptionAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
pvEncryptionAuxInfo: Pointer;
end;
{$EXTERNALSYM _CMSG_ENCRYPTED_ENCODE_INFO}
CMSG_ENCRYPTED_ENCODE_INFO = _CMSG_ENCRYPTED_ENCODE_INFO;
{$EXTERNALSYM CMSG_ENCRYPTED_ENCODE_INFO}
TCmsgEncryptedEncodeInfo = CMSG_ENCRYPTED_ENCODE_INFO;
PCmsgEncryptedEncodeInfo = PCMSG_ENCRYPTED_ENCODE_INFO;
//+-------------------------------------------------------------------------
// This parameter allows messages to be of variable length with streamed
// output.
//
// By default, messages are of a definite length and
// CryptMsgGetParam(CMSG_CONTENT_PARAM) is
// called to get the cryptographically processed content. Until closed,
// the handle keeps a copy of the processed content.
//
// With streamed output, the processed content can be freed as its streamed.
//
// If the length of the content to be updated is known at the time of the
// open, then, ContentLength should be set to that length. Otherwise, it
// should be set to CMSG_INDEFINITE_LENGTH.
//--------------------------------------------------------------------------
type
PFN_CMSG_STREAM_OUTPUT = function(pvArg: Pointer; pbData: LPBYTE;
cbData: DWORD; fFinal: BOOL): BOOL; stdcall;
{$EXTERNALSYM PFN_CMSG_STREAM_OUTPUT}
PFnCMsgStreamOutput = PFN_CMSG_STREAM_OUTPUT;
const
CMSG_INDEFINITE_LENGTH = DWORD($FFFFFFFF);
{$EXTERNALSYM CMSG_INDEFINITE_LENGTH}
type
PCMSG_STREAM_INFO = ^CMSG_STREAM_INFO;
{$EXTERNALSYM PCMSG_STREAM_INFO}
_CMSG_STREAM_INFO = record
cbContent: DWORD;
pfnStreamOutput: PFN_CMSG_STREAM_OUTPUT;
pvArg: Pointer;
end;
{$EXTERNALSYM _CMSG_STREAM_INFO}
CMSG_STREAM_INFO = _CMSG_STREAM_INFO;
{$EXTERNALSYM CMSG_STREAM_INFO}
TCmsgStreamInfo = CMSG_STREAM_INFO;
PCmsgStreamInfo = PCMSG_STREAM_INFO;
//+-------------------------------------------------------------------------
// Open dwFlags
//--------------------------------------------------------------------------
const
CMSG_BARE_CONTENT_FLAG = $00000001;
{$EXTERNALSYM CMSG_BARE_CONTENT_FLAG}
CMSG_LENGTH_ONLY_FLAG = $00000002;
{$EXTERNALSYM CMSG_LENGTH_ONLY_FLAG}
CMSG_DETACHED_FLAG = $00000004;
{$EXTERNALSYM CMSG_DETACHED_FLAG}
CMSG_AUTHENTICATED_ATTRIBUTES_FLAG = $00000008;
{$EXTERNALSYM CMSG_AUTHENTICATED_ATTRIBUTES_FLAG}
CMSG_CONTENTS_OCTETS_FLAG = $00000010;
{$EXTERNALSYM CMSG_CONTENTS_OCTETS_FLAG}
CMSG_MAX_LENGTH_FLAG = $00000020;
{$EXTERNALSYM CMSG_MAX_LENGTH_FLAG}
// When set, nonData type inner content is encapsulated within an
// OCTET STRING. Applicable to both Signed and Enveloped messages.
CMSG_CMS_ENCAPSULATED_CONTENT_FLAG = $00000040;
{$EXTERNALSYM CMSG_CMS_ENCAPSULATED_CONTENT_FLAG}
// If set, then, the hCryptProv passed to CryptMsgOpenToEncode or
// CryptMsgOpenToDecode is released on the final CryptMsgClose.
// Not released if CryptMsgOpenToEncode or CryptMsgOpenToDecode fails.
//
// Note, the envelope recipient hCryptProv's aren't released.
CMSG_CRYPT_RELEASE_CONTEXT_FLAG = $00008000;
{$EXTERNALSYM CMSG_CRYPT_RELEASE_CONTEXT_FLAG}
//+-------------------------------------------------------------------------
// Open a cryptographic message for encoding
//
// For PKCS #7:
// If the content to be passed to CryptMsgUpdate has already
// been message encoded (the input to CryptMsgUpdate is the streamed output
// from another message encode), then, the CMSG_ENCODED_CONTENT_INFO_FLAG should
// be set in dwFlags. If not set, then, the inner ContentType is Data and
// the input to CryptMsgUpdate is treated as the inner Data type's Content,
// a string of bytes.
// If CMSG_BARE_CONTENT_FLAG is specified for a streamed message,
// the streamed output will not have an outer ContentInfo wrapper. This
// makes it suitable to be streamed into an enclosing message.
//
// The pStreamInfo parameter needs to be set to stream the encoded message
// output.
//--------------------------------------------------------------------------
function CryptMsgOpenToEncode(dwMsgEncodingType, dwFlags, dwMsgType: DWORD;
pvMsgEncodeInfo: Pointer; pszInnerContentObjID: LPSTR;
pStreamInfo: PCMSG_STREAM_INFO): HCRYPTMSG; stdcall;
{$EXTERNALSYM CryptMsgOpenToEncode}
//+-------------------------------------------------------------------------
// Calculate the length of an encoded cryptographic message.
//
// Calculates the length of the encoded message given the
// message type, encoding parameters and total length of
// the data to be updated. Note, this might not be the exact length. However,
// it will always be greater than or equal to the actual length.
//--------------------------------------------------------------------------
function CryptMsgCalculateEncodedLength(dwMsgEncodingType, dwFlags, dwMsgType: DWORD;
pvMsgEncodeInfo: Pointer; pszInnerContentObjID: LPSTR; cbData: DWORD): DWORD; stdcall;
{$EXTERNALSYM CryptMsgCalculateEncodedLength}
//+-------------------------------------------------------------------------
// Open a cryptographic message for decoding
//
// hCryptProv specifies the crypto provider to use for hashing and/or
// decrypting the message. If hCryptProv is NULL, a default crypt provider
// is used.
//
// Currently pRecipientInfo isn't used and should be set to NULL.
//
// The pStreamInfo parameter needs to be set to stream the decoded content
// output.
//--------------------------------------------------------------------------
function CryptMsgOpenToDecode(dwMsgEncodingType, dwFlags, dwMsgType: DWORD;
hCryptProv: HCRYPTPROV; pRecipientInfo: PCERT_INFO;
pStreamInfo: PCMSG_STREAM_INFO): HCRYPTMSG; stdcall;
{$EXTERNALSYM CryptMsgOpenToDecode}
//+-------------------------------------------------------------------------
// Duplicate a cryptographic message handle
//--------------------------------------------------------------------------
function CryptMsgDuplicate(hCryptMsg: HCRYPTMSG): HCRYPTMSG; stdcall;
{$EXTERNALSYM CryptMsgDuplicate}
//+-------------------------------------------------------------------------
// Close a cryptographic message handle
//
// LastError is preserved unless FALSE is returned.
//--------------------------------------------------------------------------
function CryptMsgClose(hCryptMsg: HCRYPTMSG): BOOL; stdcall;
{$EXTERNALSYM CryptMsgClose}
//+-------------------------------------------------------------------------
// Update the content of a cryptographic message. Depending on how the
// message was opened, the content is either encoded or decoded.
//
// This function is repetitively called to append to the message content.
// fFinal is set to identify the last update. On fFinal, the encode/decode
// is completed. The encoded/decoded content and the decoded parameters
// are valid until the open and all duplicated handles are closed.
//--------------------------------------------------------------------------
function CryptMsgUpdate(hCryptMsg: HCRYPTMSG; pbData: LPBYTE; cbData: DWORD;
fFinal: BOOL): BOOL; stdcall;
{$EXTERNALSYM CryptMsgUpdate}
//+-------------------------------------------------------------------------
// Get a parameter after encoding/decoding a cryptographic message. Called
// after the final CryptMsgUpdate. Only the CMSG_CONTENT_PARAM and
// CMSG_COMPUTED_HASH_PARAM are valid for an encoded message.
//
// For an encoded HASHED message, the CMSG_COMPUTED_HASH_PARAM can be got
// before any CryptMsgUpdates to get its length.
//
// The pvData type definition depends on the dwParamType value.
//
// Elements pointed to by fields in the pvData structure follow the
// structure. Therefore, *pcbData may exceed the size of the structure.
//
// Upon input, if *pcbData == 0, then, *pcbData is updated with the length
// of the data and the pvData parameter is ignored.
//
// Upon return, *pcbData is updated with the length of the data.
//
// The OBJID BLOBs returned in the pvData structures point to
// their still encoded representation. The appropriate functions
// must be called to decode the information.
//
// See below for a list of the parameters to get.
//--------------------------------------------------------------------------
function CryptMsgGetParam(hCryptMsg: HCRYPTMSG; dwParamType, dwIndex: DWORD;
pvData: Pointer; var pcbData: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptMsgGetParam}
//+-------------------------------------------------------------------------
// Get parameter types and their corresponding data structure definitions.
//--------------------------------------------------------------------------
const
CMSG_TYPE_PARAM = 1;
{$EXTERNALSYM CMSG_TYPE_PARAM}
CMSG_CONTENT_PARAM = 2;
{$EXTERNALSYM CMSG_CONTENT_PARAM}
CMSG_BARE_CONTENT_PARAM = 3;
{$EXTERNALSYM CMSG_BARE_CONTENT_PARAM}
CMSG_INNER_CONTENT_TYPE_PARAM = 4;
{$EXTERNALSYM CMSG_INNER_CONTENT_TYPE_PARAM}
CMSG_SIGNER_COUNT_PARAM = 5;
{$EXTERNALSYM CMSG_SIGNER_COUNT_PARAM}
CMSG_SIGNER_INFO_PARAM = 6;
{$EXTERNALSYM CMSG_SIGNER_INFO_PARAM}
CMSG_SIGNER_CERT_INFO_PARAM = 7;
{$EXTERNALSYM CMSG_SIGNER_CERT_INFO_PARAM}
CMSG_SIGNER_HASH_ALGORITHM_PARAM = 8;
{$EXTERNALSYM CMSG_SIGNER_HASH_ALGORITHM_PARAM}
CMSG_SIGNER_AUTH_ATTR_PARAM = 9;
{$EXTERNALSYM CMSG_SIGNER_AUTH_ATTR_PARAM}
CMSG_SIGNER_UNAUTH_ATTR_PARAM = 10;
{$EXTERNALSYM CMSG_SIGNER_UNAUTH_ATTR_PARAM}
CMSG_CERT_COUNT_PARAM = 11;
{$EXTERNALSYM CMSG_CERT_COUNT_PARAM}
CMSG_CERT_PARAM = 12;
{$EXTERNALSYM CMSG_CERT_PARAM}
CMSG_CRL_COUNT_PARAM = 13;
{$EXTERNALSYM CMSG_CRL_COUNT_PARAM}
CMSG_CRL_PARAM = 14;
{$EXTERNALSYM CMSG_CRL_PARAM}
CMSG_ENVELOPE_ALGORITHM_PARAM = 15;
{$EXTERNALSYM CMSG_ENVELOPE_ALGORITHM_PARAM}
CMSG_RECIPIENT_COUNT_PARAM = 17;
{$EXTERNALSYM CMSG_RECIPIENT_COUNT_PARAM}
CMSG_RECIPIENT_INDEX_PARAM = 18;
{$EXTERNALSYM CMSG_RECIPIENT_INDEX_PARAM}
CMSG_RECIPIENT_INFO_PARAM = 19;
{$EXTERNALSYM CMSG_RECIPIENT_INFO_PARAM}
CMSG_HASH_ALGORITHM_PARAM = 20;
{$EXTERNALSYM CMSG_HASH_ALGORITHM_PARAM}
CMSG_HASH_DATA_PARAM = 21;
{$EXTERNALSYM CMSG_HASH_DATA_PARAM}
CMSG_COMPUTED_HASH_PARAM = 22;
{$EXTERNALSYM CMSG_COMPUTED_HASH_PARAM}
CMSG_ENCRYPT_PARAM = 26;
{$EXTERNALSYM CMSG_ENCRYPT_PARAM}
CMSG_ENCRYPTED_DIGEST = 27;
{$EXTERNALSYM CMSG_ENCRYPTED_DIGEST}
CMSG_ENCODED_SIGNER = 28;
{$EXTERNALSYM CMSG_ENCODED_SIGNER}
CMSG_ENCODED_MESSAGE = 29;
{$EXTERNALSYM CMSG_ENCODED_MESSAGE}
CMSG_VERSION_PARAM = 30;
{$EXTERNALSYM CMSG_VERSION_PARAM}
CMSG_ATTR_CERT_COUNT_PARAM = 31;
{$EXTERNALSYM CMSG_ATTR_CERT_COUNT_PARAM}
CMSG_ATTR_CERT_PARAM = 32;
{$EXTERNALSYM CMSG_ATTR_CERT_PARAM}
CMSG_CMS_RECIPIENT_COUNT_PARAM = 33;
{$EXTERNALSYM CMSG_CMS_RECIPIENT_COUNT_PARAM}
CMSG_CMS_RECIPIENT_INDEX_PARAM = 34;
{$EXTERNALSYM CMSG_CMS_RECIPIENT_INDEX_PARAM}
CMSG_CMS_RECIPIENT_ENCRYPTED_KEY_INDEX_PARAM = 35;
{$EXTERNALSYM CMSG_CMS_RECIPIENT_ENCRYPTED_KEY_INDEX_PARAM}
CMSG_CMS_RECIPIENT_INFO_PARAM = 36;
{$EXTERNALSYM CMSG_CMS_RECIPIENT_INFO_PARAM}
CMSG_UNPROTECTED_ATTR_PARAM = 37;
{$EXTERNALSYM CMSG_UNPROTECTED_ATTR_PARAM}
CMSG_SIGNER_CERT_ID_PARAM = 38;
{$EXTERNALSYM CMSG_SIGNER_CERT_ID_PARAM}
CMSG_CMS_SIGNER_INFO_PARAM = 39;
{$EXTERNALSYM CMSG_CMS_SIGNER_INFO_PARAM}
//+-------------------------------------------------------------------------
// CMSG_TYPE_PARAM
//
// The type of the decoded message.
//
// pvData points to a DWORD
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_CONTENT_PARAM
//
// The encoded content of a cryptographic message. Depending on how the
// message was opened, the content is either the whole PKCS#7
// message (opened to encode) or the inner content (opened to decode).
// In the decode case, the decrypted content is returned, if enveloped.
// If not enveloped, and if the inner content is of type DATA, the returned
// data is the contents octets of the inner content.
//
// pvData points to the buffer receiving the content bytes
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_BARE_CONTENT_PARAM
//
// The encoded content of an encoded cryptographic message, without the
// outer layer of ContentInfo. That is, only the encoding of the
// ContentInfo.content field is returned.
//
// pvData points to the buffer receiving the content bytes
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_INNER_CONTENT_TYPE_PARAM
//
// The type of the inner content of a decoded cryptographic message,
// in the form of a NULL-terminated object identifier string
// (eg. "1.2.840.113549.1.7.1").
//
// pvData points to the buffer receiving the object identifier string
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_SIGNER_COUNT_PARAM
//
// Count of signers in a SIGNED or SIGNED_AND_ENVELOPED message
//
// pvData points to a DWORD
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_SIGNER_CERT_INFO_PARAM
//
// To get all the signers, repetitively call CryptMsgGetParam, with
// dwIndex set to 0 .. SignerCount - 1.
//
// pvData points to a CERT_INFO struct.
//
// Only the following fields have been updated in the CERT_INFO struct:
// Issuer and SerialNumber.
//
// Note, if the KEYID choice was selected for a CMS SignerId, then, the
// SerialNumber is 0 and the Issuer is encoded containing a single RDN with a
// single Attribute whose OID is szOID_KEYID_RDN, value type is
// CERT_RDN_OCTET_STRING and value is the KEYID. When the
// CertGetSubjectCertificateFromStore and
// CertFindCertificateInStore(CERT_FIND_SUBJECT_CERT) APIs see this
// special KEYID Issuer and SerialNumber, they do a KEYID match.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_SIGNER_INFO_PARAM
//
// To get all the signers, repetitively call CryptMsgGetParam, with
// dwIndex set to 0 .. SignerCount - 1.
//
// pvData points to a CMSG_SIGNER_INFO struct.
//
// Note, if the KEYID choice was selected for a CMS SignerId, then, the
// SerialNumber is 0 and the Issuer is encoded containing a single RDN with a
// single Attribute whose OID is szOID_KEYID_RDN, value type is
// CERT_RDN_OCTET_STRING and value is the KEYID. When the
// CertGetSubjectCertificateFromStore and
// CertFindCertificateInStore(CERT_FIND_SUBJECT_CERT) APIs see this
// special KEYID Issuer and SerialNumber, they do a KEYID match.
//--------------------------------------------------------------------------
type
PCMSG_SIGNER_INFO = ^CMSG_SIGNER_INFO;
{$EXTERNALSYM PCMSG_SIGNER_INFO}
_CMSG_SIGNER_INFO = record
dwVersion: DWORD;
Issuer: CERT_NAME_BLOB;
SerialNumber: CRYPT_INTEGER_BLOB;
HashAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
HashEncryptionAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
EncryptedHash: CRYPT_DATA_BLOB;
AuthAttrs: CRYPT_ATTRIBUTES;
UnauthAttrs: CRYPT_ATTRIBUTES;
end;
{$EXTERNALSYM _CMSG_SIGNER_INFO}
CMSG_SIGNER_INFO = _CMSG_SIGNER_INFO;
{$EXTERNALSYM CMSG_SIGNER_INFO}
TCmsgSignerInfo = CMSG_SIGNER_INFO;
PCmsgSignerInfo = PCMSG_SIGNER_INFO;
//+-------------------------------------------------------------------------
// CMSG_SIGNER_CERT_ID_PARAM
//
// To get all the signers, repetitively call CryptMsgGetParam, with
// dwIndex set to 0 .. SignerCount - 1.
//
// pvData points to a CERT_ID struct.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_CMS_SIGNER_INFO_PARAM
//
// Same as CMSG_SIGNER_INFO_PARAM, except, contains SignerId instead of
// Issuer and SerialNumber.
//
// To get all the signers, repetitively call CryptMsgGetParam, with
// dwIndex set to 0 .. SignerCount - 1.
//
// pvData points to a CMSG_CMS_SIGNER_INFO struct.
//--------------------------------------------------------------------------
PCMSG_CMS_SIGNER_INFO = ^CMSG_CMS_SIGNER_INFO;
{$EXTERNALSYM PCMSG_CMS_SIGNER_INFO}
_CMSG_CMS_SIGNER_INFO = record
dwVersion: DWORD;
SignerId: CERT_ID;
HashAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
HashEncryptionAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
EncryptedHash: CRYPT_DATA_BLOB;
AuthAttrs: CRYPT_ATTRIBUTES;
UnauthAttrs: CRYPT_ATTRIBUTES;
end;
{$EXTERNALSYM _CMSG_CMS_SIGNER_INFO}
CMSG_CMS_SIGNER_INFO = _CMSG_CMS_SIGNER_INFO;
{$EXTERNALSYM CMSG_CMS_SIGNER_INFO}
TCmsgCmsSignerInfo = CMSG_CMS_SIGNER_INFO;
PCmsgCmsSignerInfo = PCMSG_CMS_SIGNER_INFO;
//+-------------------------------------------------------------------------
// CMSG_SIGNER_HASH_ALGORITHM_PARAM
//
// This parameter specifies the HashAlgorithm that was used for the signer.
//
// Set dwIndex to iterate through all the signers.
//
// pvData points to an CRYPT_ALGORITHM_IDENTIFIER struct.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_SIGNER_AUTH_ATTR_PARAM
//
// The authenticated attributes for the signer.
//
// Set dwIndex to iterate through all the signers.
//
// pvData points to a CMSG_ATTR struct.
//--------------------------------------------------------------------------
CMSG_ATTR = CRYPT_ATTRIBUTES;
{$EXTERNALSYM CMSG_ATTR}
PCMSG_ATTR = ^CRYPT_ATTRIBUTES;
{$EXTERNALSYM PCMSG_ATTR}
//+-------------------------------------------------------------------------
// CMSG_SIGNER_UNAUTH_ATTR_PARAM
//
// The unauthenticated attributes for the signer.
//
// Set dwIndex to iterate through all the signers.
//
// pvData points to a CMSG_ATTR struct.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_CERT_COUNT_PARAM
//
// Count of certificates in a SIGNED or SIGNED_AND_ENVELOPED message.
//
// CMS, also supports certificates in an ENVELOPED message.
//
// pvData points to a DWORD
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_CERT_PARAM
//
// To get all the certificates, repetitively call CryptMsgGetParam, with
// dwIndex set to 0 .. CertCount - 1.
//
// pvData points to an array of the certificate's encoded bytes.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_CRL_COUNT_PARAM
//
// Count of CRLs in a SIGNED or SIGNED_AND_ENVELOPED message.
//
// CMS, also supports CRLs in an ENVELOPED message.
//
// pvData points to a DWORD
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_CRL_PARAM
//
// To get all the CRLs, repetitively call CryptMsgGetParam, with
// dwIndex set to 0 .. CrlCount - 1.
//
// pvData points to an array of the CRL's encoded bytes.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_ENVELOPE_ALGORITHM_PARAM
//
// The ContentEncryptionAlgorithm that was used in
// an ENVELOPED or SIGNED_AND_ENVELOPED message.
//
// For streaming you must be able to successfully get this parameter before
// doing a CryptMsgControl decrypt.
//
// pvData points to an CRYPT_ALGORITHM_IDENTIFIER struct.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_RECIPIENT_COUNT_PARAM
//
// Count of recipients in an ENVELOPED or SIGNED_AND_ENVELOPED message.
//
// Count of key transport recepients.
//
// The CMSG_CMS_RECIPIENT_COUNT_PARAM has the total count of
// recipients (it also includes key agree and mail list recipients).
//
// pvData points to a DWORD
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_RECIPIENT_INDEX_PARAM
//
// Index of the recipient used to decrypt an ENVELOPED or SIGNED_AND_ENVELOPED
// message.
//
// Index of a key transport recipient. If a non key transport
// recipient was used to decrypt, fails with LastError set to
// CRYPT_E_INVALID_INDEX.
//
// pvData points to a DWORD
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_RECIPIENT_INFO_PARAM
//
// To get all the recipients, repetitively call CryptMsgGetParam, with
// dwIndex set to 0 .. RecipientCount - 1.
//
// Only returns the key transport recepients.
//
// The CMSG_CMS_RECIPIENT_INFO_PARAM returns all recipients.
//
// pvData points to a CERT_INFO struct.
//
// Only the following fields have been updated in the CERT_INFO struct:
// Issuer, SerialNumber and PublicKeyAlgorithm. The PublicKeyAlgorithm
// specifies the KeyEncryptionAlgorithm that was used.
//
// Note, if the KEYID choice was selected for a key transport recipient, then,
// the SerialNumber is 0 and the Issuer is encoded containing a single RDN
// with a single Attribute whose OID is szOID_KEYID_RDN, value type is
// CERT_RDN_OCTET_STRING and value is the KEYID. When the
// CertGetSubjectCertificateFromStore and
// CertFindCertificateInStore(CERT_FIND_SUBJECT_CERT) APIs see this
// special KEYID Issuer and SerialNumber, they do a KEYID match.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_HASH_ALGORITHM_PARAM
//
// The HashAlgorithm in a HASHED message.
//
// pvData points to an CRYPT_ALGORITHM_IDENTIFIER struct.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_HASH_DATA_PARAM
//
// The hash in a HASHED message.
//
// pvData points to an array of bytes.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_COMPUTED_HASH_PARAM
//
// The computed hash for a HASHED message.
// This may be called for either an encoded or decoded message.
//
// Also, the computed hash for one of the signer's in a SIGNED message.
// It may be called for either an encoded or decoded message after the
// final update. Set dwIndex to iterate through all the signers.
//
// pvData points to an array of bytes.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_ENCRYPT_PARAM
//
// The ContentEncryptionAlgorithm that was used in an ENCRYPTED message.
//
// pvData points to an CRYPT_ALGORITHM_IDENTIFIER struct.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_ENCODED_MESSAGE
//
// The full encoded message. This is useful in the case of a decoded
// message which has been modified (eg. a signed-data or
// signed-and-enveloped-data message which has been countersigned).
//
// pvData points to an array of the message's encoded bytes.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_VERSION_PARAM
//
// The version of the decoded message.
//
// pvData points to a DWORD
//--------------------------------------------------------------------------
const
CMSG_SIGNED_DATA_V1 = 1;
{$EXTERNALSYM CMSG_SIGNED_DATA_V1}
CMSG_SIGNED_DATA_V3 = 3;
{$EXTERNALSYM CMSG_SIGNED_DATA_V3}
CMSG_SIGNED_DATA_PKCS_1_5_VERSION = CMSG_SIGNED_DATA_V1;
{$EXTERNALSYM CMSG_SIGNED_DATA_PKCS_1_5_VERSION}
CMSG_SIGNED_DATA_CMS_VERSION = CMSG_SIGNED_DATA_V3;
{$EXTERNALSYM CMSG_SIGNED_DATA_CMS_VERSION}
CMSG_SIGNER_INFO_V1 = 1;
{$EXTERNALSYM CMSG_SIGNER_INFO_V1}
CMSG_SIGNER_INFO_V3 = 3;
{$EXTERNALSYM CMSG_SIGNER_INFO_V3}
CMSG_SIGNER_INFO_PKCS_1_5_VERSION = CMSG_SIGNER_INFO_V1;
{$EXTERNALSYM CMSG_SIGNER_INFO_PKCS_1_5_VERSION}
CMSG_SIGNER_INFO_CMS_VERSION = CMSG_SIGNER_INFO_V3;
{$EXTERNALSYM CMSG_SIGNER_INFO_CMS_VERSION}
CMSG_HASHED_DATA_V0 = 0;
{$EXTERNALSYM CMSG_HASHED_DATA_V0}
CMSG_HASHED_DATA_V2 = 2;
{$EXTERNALSYM CMSG_HASHED_DATA_V2}
CMSG_HASHED_DATA_PKCS_1_5_VERSION = CMSG_HASHED_DATA_V0;
{$EXTERNALSYM CMSG_HASHED_DATA_PKCS_1_5_VERSION}
CMSG_HASHED_DATA_CMS_VERSION = CMSG_HASHED_DATA_V2;
{$EXTERNALSYM CMSG_HASHED_DATA_CMS_VERSION}
CMSG_ENVELOPED_DATA_V0 = 0;
{$EXTERNALSYM CMSG_ENVELOPED_DATA_V0}
CMSG_ENVELOPED_DATA_V2 = 2;
{$EXTERNALSYM CMSG_ENVELOPED_DATA_V2}
CMSG_ENVELOPED_DATA_PKCS_1_5_VERSION = CMSG_ENVELOPED_DATA_V0;
{$EXTERNALSYM CMSG_ENVELOPED_DATA_PKCS_1_5_VERSION}
CMSG_ENVELOPED_DATA_CMS_VERSION = CMSG_ENVELOPED_DATA_V2;
{$EXTERNALSYM CMSG_ENVELOPED_DATA_CMS_VERSION}
//+-------------------------------------------------------------------------
// CMSG_ATTR_CERT_COUNT_PARAM
//
// Count of attribute certificates in a SIGNED or ENVELOPED message.
//
// pvData points to a DWORD
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_ATTR_CERT_PARAM
//
// To get all the attribute certificates, repetitively call CryptMsgGetParam,
// with dwIndex set to 0 .. AttrCertCount - 1.
//
// pvData points to an array of the attribute certificate's encoded bytes.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_CMS_RECIPIENT_COUNT_PARAM
//
// Count of all CMS recipients in an ENVELOPED message.
//
// pvData points to a DWORD
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_CMS_RECIPIENT_INDEX_PARAM
//
// Index of the CMS recipient used to decrypt an ENVELOPED message.
//
// pvData points to a DWORD
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_CMS_RECIPIENT_ENCRYPTED_KEY_INDEX_PARAM
//
// For a CMS key agreement recipient, the index of the encrypted key
// used to decrypt an ENVELOPED message.
//
// pvData points to a DWORD
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_CMS_RECIPIENT_INFO_PARAM
//
// To get all the CMS recipients, repetitively call CryptMsgGetParam, with
// dwIndex set to 0 .. CmsRecipientCount - 1.
//
// pvData points to a CMSG_CMS_RECIPIENT_INFO struct.
//--------------------------------------------------------------------------
type
PCMSG_KEY_TRANS_RECIPIENT_INFO = ^CMSG_KEY_TRANS_RECIPIENT_INFO;
{$EXTERNALSYM PCMSG_KEY_TRANS_RECIPIENT_INFO}
_CMSG_KEY_TRANS_RECIPIENT_INFO = record
dwVersion: DWORD;
// Currently, only ISSUER_SERIAL_NUMBER or KEYID choices
RecipientId: CERT_ID;
KeyEncryptionAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
EncryptedKey: CRYPT_DATA_BLOB;
end;
{$EXTERNALSYM _CMSG_KEY_TRANS_RECIPIENT_INFO}
CMSG_KEY_TRANS_RECIPIENT_INFO = _CMSG_KEY_TRANS_RECIPIENT_INFO;
{$EXTERNALSYM CMSG_KEY_TRANS_RECIPIENT_INFO}
TCmsgKeyTransRecipientInfo = CMSG_KEY_TRANS_RECIPIENT_INFO;
PCmsgKeyTransRecipientInfo = PCMSG_KEY_TRANS_RECIPIENT_INFO;
PCMSG_RECIPIENT_ENCRYPTED_KEY_INFO = ^CMSG_RECIPIENT_ENCRYPTED_KEY_INFO;
{$EXTERNALSYM PCMSG_RECIPIENT_ENCRYPTED_KEY_INFO}
_CMSG_RECIPIENT_ENCRYPTED_KEY_INFO = record
// Currently, only ISSUER_SERIAL_NUMBER or KEYID choices
RecipientId: CERT_ID;
EncryptedKey: CRYPT_DATA_BLOB;
// The following optional fields are only applicable to KEYID choice
Date: FILETIME;
pOtherAttr: PCRYPT_ATTRIBUTE_TYPE_VALUE;
end;
{$EXTERNALSYM _CMSG_RECIPIENT_ENCRYPTED_KEY_INFO}
CMSG_RECIPIENT_ENCRYPTED_KEY_INFO = _CMSG_RECIPIENT_ENCRYPTED_KEY_INFO;
{$EXTERNALSYM CMSG_RECIPIENT_ENCRYPTED_KEY_INFO}
TCmsgRecipientEncryptedKeyInfo = CMSG_RECIPIENT_ENCRYPTED_KEY_INFO;
PCmsgRecipientEncryptedKeyInfo = PCMSG_RECIPIENT_ENCRYPTED_KEY_INFO;
PCMSG_KEY_AGREE_RECIPIENT_INFO = ^CMSG_KEY_AGREE_RECIPIENT_INFO;
{$EXTERNALSYM PCMSG_KEY_AGREE_RECIPIENT_INFO}
_CMSG_KEY_AGREE_RECIPIENT_INFO = record
dwVersion: DWORD;
dwOriginatorChoice: DWORD;
Union: record
case Integer of
// CMSG_KEY_AGREE_ORIGINATOR_CERT
0: (OriginatorCertId: CERT_ID);
// CMSG_KEY_AGREE_ORIGINATOR_PUBLIC_KEY
1: (OriginatorPublicKeyInfo: CERT_PUBLIC_KEY_INFO);
end;
UserKeyingMaterial: CRYPT_DATA_BLOB;
KeyEncryptionAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
cRecipientEncryptedKeys: DWORD;
rgpRecipientEncryptedKeys: PCMSG_RECIPIENT_ENCRYPTED_KEY_INFO;
end;
{$EXTERNALSYM _CMSG_KEY_AGREE_RECIPIENT_INFO}
CMSG_KEY_AGREE_RECIPIENT_INFO = _CMSG_KEY_AGREE_RECIPIENT_INFO;
{$EXTERNALSYM CMSG_KEY_AGREE_RECIPIENT_INFO}
TCmsgKeyAgreeRecipientInfo = CMSG_KEY_AGREE_RECIPIENT_INFO;
PCmsgKeyAgreeRecipientInfo = PCMSG_KEY_AGREE_RECIPIENT_INFO;
const
CMSG_KEY_AGREE_ORIGINATOR_CERT = 1;
{$EXTERNALSYM CMSG_KEY_AGREE_ORIGINATOR_CERT}
CMSG_KEY_AGREE_ORIGINATOR_PUBLIC_KEY = 2;
{$EXTERNALSYM CMSG_KEY_AGREE_ORIGINATOR_PUBLIC_KEY}
type
PCMSG_MAIL_LIST_RECIPIENT_INFO = ^CMSG_MAIL_LIST_RECIPIENT_INFO;
{$EXTERNALSYM PCMSG_MAIL_LIST_RECIPIENT_INFO}
_CMSG_MAIL_LIST_RECIPIENT_INFO = record
dwVersion: DWORD;
KeyId: CRYPT_DATA_BLOB;
KeyEncryptionAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
EncryptedKey: CRYPT_DATA_BLOB;
// The following fields are optional
Date: FILETIME;
pOtherAttr: PCRYPT_ATTRIBUTE_TYPE_VALUE;
end;
{$EXTERNALSYM _CMSG_MAIL_LIST_RECIPIENT_INFO}
CMSG_MAIL_LIST_RECIPIENT_INFO = _CMSG_MAIL_LIST_RECIPIENT_INFO;
{$EXTERNALSYM CMSG_MAIL_LIST_RECIPIENT_INFO}
TCmsgMailListRecipientInfo = CMSG_MAIL_LIST_RECIPIENT_INFO;
PCmsgMailListRecipientInfo = PCMSG_MAIL_LIST_RECIPIENT_INFO;
PCMSG_CMS_RECIPIENT_INFO = ^CMSG_CMS_RECIPIENT_INFO;
{$EXTERNALSYM PCMSG_CMS_RECIPIENT_INFO}
_CMSG_CMS_RECIPIENT_INFO = record
dwRecipientChoice: DWORD;
case Integer of
// CMSG_KEY_TRANS_RECIPIENT
0: (pKeyTrans: PCMSG_KEY_TRANS_RECIPIENT_INFO);
// CMSG_KEY_AGREE_RECIPIENT
1: (pKeyAgree: PCMSG_KEY_AGREE_RECIPIENT_INFO);
// CMSG_MAIL_LIST_RECIPIENT
2: (pMailList: PCMSG_MAIL_LIST_RECIPIENT_INFO);
end;
{$EXTERNALSYM _CMSG_CMS_RECIPIENT_INFO}
CMSG_CMS_RECIPIENT_INFO = _CMSG_CMS_RECIPIENT_INFO;
{$EXTERNALSYM CMSG_CMS_RECIPIENT_INFO}
TCmsgCmsRecipientInfo = CMSG_CMS_RECIPIENT_INFO;
PCmsgCmsRecipientInfo = PCMSG_CMS_RECIPIENT_INFO;
// dwVersion numbers for the KeyTrans, KeyAgree and MailList recipients
const
CMSG_ENVELOPED_RECIPIENT_V0 = 0;
{$EXTERNALSYM CMSG_ENVELOPED_RECIPIENT_V0}
CMSG_ENVELOPED_RECIPIENT_V2 = 2;
{$EXTERNALSYM CMSG_ENVELOPED_RECIPIENT_V2}
CMSG_ENVELOPED_RECIPIENT_V3 = 3;
{$EXTERNALSYM CMSG_ENVELOPED_RECIPIENT_V3}
CMSG_ENVELOPED_RECIPIENT_V4 = 4;
{$EXTERNALSYM CMSG_ENVELOPED_RECIPIENT_V4}
CMSG_KEY_TRANS_PKCS_1_5_VERSION = CMSG_ENVELOPED_RECIPIENT_V0;
{$EXTERNALSYM CMSG_KEY_TRANS_PKCS_1_5_VERSION}
CMSG_KEY_TRANS_CMS_VERSION = CMSG_ENVELOPED_RECIPIENT_V2;
{$EXTERNALSYM CMSG_KEY_TRANS_CMS_VERSION}
CMSG_KEY_AGREE_VERSION = CMSG_ENVELOPED_RECIPIENT_V3;
{$EXTERNALSYM CMSG_KEY_AGREE_VERSION}
CMSG_MAIL_LIST_VERSION = CMSG_ENVELOPED_RECIPIENT_V4;
{$EXTERNALSYM CMSG_MAIL_LIST_VERSION}
//+-------------------------------------------------------------------------
// CMSG_UNPROTECTED_ATTR_PARAM
//
// The unprotected attributes in the envelped message.
//
// pvData points to a CMSG_ATTR struct.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// Perform a special "control" function after the final CryptMsgUpdate of a
// encoded/decoded cryptographic message.
//
// The dwCtrlType parameter specifies the type of operation to be performed.
//
// The pvCtrlPara definition depends on the dwCtrlType value.
//
// See below for a list of the control operations and their pvCtrlPara
// type definition.
//--------------------------------------------------------------------------
function CryptMsgControl(hCryptMsg: HCRYPTMSG; dwFlags, dwCtrlType: DWORD;
pvCtrlPara: Pointer): BOOL; stdcall;
{$EXTERNALSYM CryptMsgControl}
//+-------------------------------------------------------------------------
// Message control types
//--------------------------------------------------------------------------
const
CMSG_CTRL_VERIFY_SIGNATURE = 1;
{$EXTERNALSYM CMSG_CTRL_VERIFY_SIGNATURE}
CMSG_CTRL_DECRYPT = 2;
{$EXTERNALSYM CMSG_CTRL_DECRYPT}
CMSG_CTRL_VERIFY_HASH = 5;
{$EXTERNALSYM CMSG_CTRL_VERIFY_HASH}
CMSG_CTRL_ADD_SIGNER = 6;
{$EXTERNALSYM CMSG_CTRL_ADD_SIGNER}
CMSG_CTRL_DEL_SIGNER = 7;
{$EXTERNALSYM CMSG_CTRL_DEL_SIGNER}
CMSG_CTRL_ADD_SIGNER_UNAUTH_ATTR = 8;
{$EXTERNALSYM CMSG_CTRL_ADD_SIGNER_UNAUTH_ATTR}
CMSG_CTRL_DEL_SIGNER_UNAUTH_ATTR = 9;
{$EXTERNALSYM CMSG_CTRL_DEL_SIGNER_UNAUTH_ATTR}
CMSG_CTRL_ADD_CERT = 10;
{$EXTERNALSYM CMSG_CTRL_ADD_CERT}
CMSG_CTRL_DEL_CERT = 11;
{$EXTERNALSYM CMSG_CTRL_DEL_CERT}
CMSG_CTRL_ADD_CRL = 12;
{$EXTERNALSYM CMSG_CTRL_ADD_CRL}
CMSG_CTRL_DEL_CRL = 13;
{$EXTERNALSYM CMSG_CTRL_DEL_CRL}
CMSG_CTRL_ADD_ATTR_CERT = 14;
{$EXTERNALSYM CMSG_CTRL_ADD_ATTR_CERT}
CMSG_CTRL_DEL_ATTR_CERT = 15;
{$EXTERNALSYM CMSG_CTRL_DEL_ATTR_CERT}
CMSG_CTRL_KEY_TRANS_DECRYPT = 16;
{$EXTERNALSYM CMSG_CTRL_KEY_TRANS_DECRYPT}
CMSG_CTRL_KEY_AGREE_DECRYPT = 17;
{$EXTERNALSYM CMSG_CTRL_KEY_AGREE_DECRYPT}
CMSG_CTRL_MAIL_LIST_DECRYPT = 18;
{$EXTERNALSYM CMSG_CTRL_MAIL_LIST_DECRYPT}
CMSG_CTRL_VERIFY_SIGNATURE_EX = 19;
{$EXTERNALSYM CMSG_CTRL_VERIFY_SIGNATURE_EX}
CMSG_CTRL_ADD_CMS_SIGNER_INFO = 20;
{$EXTERNALSYM CMSG_CTRL_ADD_CMS_SIGNER_INFO}
//+-------------------------------------------------------------------------
// CMSG_CTRL_VERIFY_SIGNATURE
//
// Verify the signature of a SIGNED or SIGNED_AND_ENVELOPED
// message after it has been decoded.
//
// For a SIGNED_AND_ENVELOPED message, called after
// CryptMsgControl(CMSG_CTRL_DECRYPT), if CryptMsgOpenToDecode was called
// with a NULL pRecipientInfo.
//
// pvCtrlPara points to a CERT_INFO struct.
//
// The CERT_INFO contains the Issuer and SerialNumber identifying
// the Signer of the message. The CERT_INFO also contains the
// PublicKeyInfo
// used to verify the signature. The cryptographic provider specified
// in CryptMsgOpenToDecode is used.
//
// Note, if the message contains CMS signers identified by KEYID, then,
// the CERT_INFO's Issuer and SerialNumber is ignored and only the public
// key is used to find a signer whose signature verifies.
//
// The following CMSG_CTRL_VERIFY_SIGNATURE_EX should be used instead.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_CTRL_VERIFY_SIGNATURE_EX
//
// Verify the signature of a SIGNED message after it has been decoded.
//
// pvCtrlPara points to the following CMSG_CTRL_VERIFY_SIGNATURE_EX_PARA.
//
// If hCryptProv is NULL, uses the cryptographic provider specified in
// CryptMsgOpenToDecode. If CryptMsgOpenToDecode's hCryptProv is also NULL,
// gets default provider according to the signer's public key OID.
//
// dwSignerIndex is the index of the signer to use to verify the signature.
//
// The signer can be a pointer to a CERT_PUBLIC_KEY_INFO, certificate
// context or a chain context.
//--------------------------------------------------------------------------
type
PCMSG_CTRL_VERIFY_SIGNATURE_EX_PARA = ^CMSG_CTRL_VERIFY_SIGNATURE_EX_PARA;
{$EXTERNALSYM PCMSG_CTRL_VERIFY_SIGNATURE_EX_PARA}
_CMSG_CTRL_VERIFY_SIGNATURE_EX_PARA = record
cbSize: DWORD;
hCryptProv: HCRYPTPROV;
dwSignerIndex: DWORD;
dwSignerType: DWORD;
pvSigner: Pointer;
end;
{$EXTERNALSYM _CMSG_CTRL_VERIFY_SIGNATURE_EX_PARA}
CMSG_CTRL_VERIFY_SIGNATURE_EX_PARA = _CMSG_CTRL_VERIFY_SIGNATURE_EX_PARA;
{$EXTERNALSYM CMSG_CTRL_VERIFY_SIGNATURE_EX_PARA}
TCmsgCtrlVerifySignatureExPara = CMSG_CTRL_VERIFY_SIGNATURE_EX_PARA;
PCmsgCtrlVerifySignatureExPara = PCMSG_CTRL_VERIFY_SIGNATURE_EX_PARA;
// Signer Types
const
CMSG_VERIFY_SIGNER_PUBKEY = 1;
{$EXTERNALSYM CMSG_VERIFY_SIGNER_PUBKEY}
// pvSigner :: PCERT_PUBLIC_KEY_INFO
CMSG_VERIFY_SIGNER_CERT = 2;
{$EXTERNALSYM CMSG_VERIFY_SIGNER_CERT}
// pvSigner :: PCCERT_CONTEXT
CMSG_VERIFY_SIGNER_CHAIN = 3;
{$EXTERNALSYM CMSG_VERIFY_SIGNER_CHAIN}
// pvSigner :: PCCERT_CHAIN_CONTEXT
//+-------------------------------------------------------------------------
// CMSG_CTRL_DECRYPT
//
// Decrypt an ENVELOPED or SIGNED_AND_ENVELOPED message after it has been
// decoded.
//
// This decrypt is only applicable to key transport recipients.
//
// hCryptProv and dwKeySpec specify the private key to use. For dwKeySpec ==
// 0, defaults to AT_KEYEXCHANGE.
//
// If CMSG_CRYPT_RELEASE_CONTEXT_FLAG is set in the dwFlags passed
// to CryptMsgControl, then, the hCryptProv is released on the final
// CryptMsgClose. Not released if CryptMsgControl fails.
//
// dwRecipientIndex is the index of the recipient in the message associated
// with the hCryptProv's private key.
//
// The dwRecipientIndex is the index of a key transport recipient.
//
// Note, the message can only be decrypted once.
//--------------------------------------------------------------------------
type
PCMSG_CTRL_DECRYPT_PARA = ^CMSG_CTRL_DECRYPT_PARA;
{$EXTERNALSYM PCMSG_CTRL_DECRYPT_PARA}
_CMSG_CTRL_DECRYPT_PARA = record
cbSize: DWORD;
hCryptProv: HCRYPTPROV;
dwKeySpec: DWORD;
dwRecipientIndex: DWORD;
end;
{$EXTERNALSYM _CMSG_CTRL_DECRYPT_PARA}
CMSG_CTRL_DECRYPT_PARA = _CMSG_CTRL_DECRYPT_PARA;
{$EXTERNALSYM CMSG_CTRL_DECRYPT_PARA}
TCmsgCtrlDecryptPara = CMSG_CTRL_DECRYPT_PARA;
PCmsgCtrlDecryptPara = PCMSG_CTRL_DECRYPT_PARA;
//+-------------------------------------------------------------------------
// CMSG_CTRL_KEY_TRANS_DECRYPT
//
// Decrypt an ENVELOPED message after it has been decoded for a key
// transport recipient.
//
// hCryptProv and dwKeySpec specify the private key to use. For dwKeySpec ==
// 0, defaults to AT_KEYEXCHANGE.
//
// If CMSG_CRYPT_RELEASE_CONTEXT_FLAG is set in the dwFlags passed
// to CryptMsgControl, then, the hCryptProv is released on the final
// CryptMsgClose. Not released if CryptMsgControl fails.
//
// pKeyTrans points to the CMSG_KEY_TRANS_RECIPIENT_INFO obtained via
// CryptMsgGetParam(CMSG_CMS_RECIPIENT_INFO_PARAM)
//
// dwRecipientIndex is the index of the recipient in the message associated
// with the hCryptProv's private key.
//
// Note, the message can only be decrypted once.
//--------------------------------------------------------------------------
PCMSG_CTRL_KEY_TRANS_DECRYPT_PARA = ^CMSG_CTRL_KEY_TRANS_DECRYPT_PARA;
{$EXTERNALSYM PCMSG_CTRL_KEY_TRANS_DECRYPT_PARA}
_CMSG_CTRL_KEY_TRANS_DECRYPT_PARA = record
cbSize: DWORD;
hCryptProv: HCRYPTPROV;
dwKeySpec: DWORD;
pKeyTrans: PCMSG_KEY_TRANS_RECIPIENT_INFO;
dwRecipientIndex: DWORD;
end;
{$EXTERNALSYM _CMSG_CTRL_KEY_TRANS_DECRYPT_PARA}
CMSG_CTRL_KEY_TRANS_DECRYPT_PARA = _CMSG_CTRL_KEY_TRANS_DECRYPT_PARA;
{$EXTERNALSYM CMSG_CTRL_KEY_TRANS_DECRYPT_PARA}
TCmsgCtrlKeyTransDecryptPara = CMSG_CTRL_KEY_TRANS_DECRYPT_PARA;
PCmsgCtrlKeyTransDecryptPara = PCMSG_CTRL_KEY_TRANS_DECRYPT_PARA;
//+-------------------------------------------------------------------------
// CMSG_CTRL_KEY_AGREE_DECRYPT
//
// Decrypt an ENVELOPED message after it has been decoded for a key
// agreement recipient.
//
// hCryptProv and dwKeySpec specify the private key to use. For dwKeySpec ==
// 0, defaults to AT_KEYEXCHANGE.
//
// If CMSG_CRYPT_RELEASE_CONTEXT_FLAG is set in the dwFlags passed
// to CryptMsgControl, then, the hCryptProv is released on the final
// CryptMsgClose. Not released if CryptMsgControl fails.
//
// pKeyAgree points to the CMSG_KEY_AGREE_RECIPIENT_INFO obtained via
// CryptMsgGetParam(CMSG_CMS_RECIPIENT_INFO_PARAM) for dwRecipientIndex.
//
// dwRecipientIndex, dwRecipientEncryptedKeyIndex are the indices of the
// recipient's encrypted key in the message associated with the hCryptProv's
// private key.
//
// OriginatorPublicKey is the originator's public key obtained from either
// the originator's certificate or the CMSG_KEY_AGREE_RECIPIENT_INFO obtained
// via the CMSG_CMS_RECIPIENT_INFO_PARAM.
//
// Note, the message can only be decrypted once.
//--------------------------------------------------------------------------
PCMSG_CTRL_KEY_AGREE_DECRYPT_PARA = ^CMSG_CTRL_KEY_AGREE_DECRYPT_PARA;
{$EXTERNALSYM PCMSG_CTRL_KEY_AGREE_DECRYPT_PARA}
_CMSG_CTRL_KEY_AGREE_DECRYPT_PARA = record
cbSize: DWORD;
hCryptProv: HCRYPTPROV;
dwKeySpec: DWORD;
pKeyAgree: PCMSG_KEY_AGREE_RECIPIENT_INFO;
dwRecipientIndex: DWORD;
dwRecipientEncryptedKeyIndex: DWORD;
OriginatorPublicKey: CRYPT_BIT_BLOB;
end;
{$EXTERNALSYM _CMSG_CTRL_KEY_AGREE_DECRYPT_PARA}
CMSG_CTRL_KEY_AGREE_DECRYPT_PARA = _CMSG_CTRL_KEY_AGREE_DECRYPT_PARA;
{$EXTERNALSYM CMSG_CTRL_KEY_AGREE_DECRYPT_PARA}
TCmsgCtrlKeyAgreeDecryptPara = CMSG_CTRL_KEY_AGREE_DECRYPT_PARA;
PCmsgCtrlKeyAgreeDecryptPara = PCMSG_CTRL_KEY_AGREE_DECRYPT_PARA;
//+-------------------------------------------------------------------------
// CMSG_CTRL_MAIL_LIST_DECRYPT
//
// Decrypt an ENVELOPED message after it has been decoded for a mail
// list recipient.
//
// pMailList points to the CMSG_MAIL_LIST_RECIPIENT_INFO obtained via
// CryptMsgGetParam(CMSG_CMS_RECIPIENT_INFO_PARAM) for dwRecipientIndex.
//
// There is 1 choice for the KeyEncryptionKey: an already created CSP key
// handle. For the key handle choice, hCryptProv must be nonzero. This key
// handle isn't destroyed.
//
// If CMSG_CRYPT_RELEASE_CONTEXT_FLAG is set in the dwFlags passed
// to CryptMsgControl, then, the hCryptProv is released on the final
// CryptMsgClose. Not released if CryptMsgControl fails.
//
// For RC2 wrap, the effective key length is obtained from the
// KeyEncryptionAlgorithm parameters and set on the hKeyEncryptionKey before
// decrypting.
//
// Note, the message can only be decrypted once.
//--------------------------------------------------------------------------
PCMSG_CTRL_MAIL_LIST_DECRYPT_PARA = ^CMSG_CTRL_MAIL_LIST_DECRYPT_PARA;
{$EXTERNALSYM PCMSG_CTRL_MAIL_LIST_DECRYPT_PARA}
_CMSG_CTRL_MAIL_LIST_DECRYPT_PARA = record
cbSize: DWORD;
hCryptProv: HCRYPTPROV;
pMailList: PCMSG_MAIL_LIST_RECIPIENT_INFO;
dwRecipientIndex: DWORD;
dwKeyChoice: DWORD;
case Integer of
// CMSG_MAIL_LIST_HANDLE_KEY_CHOICE
0: (hKeyEncryptionKey: HCRYPTKEY);
// Reserve space for a potential pointer choice
1: (pvKeyEncryptionKey: Pointer);
end;
{$EXTERNALSYM _CMSG_CTRL_MAIL_LIST_DECRYPT_PARA}
CMSG_CTRL_MAIL_LIST_DECRYPT_PARA = _CMSG_CTRL_MAIL_LIST_DECRYPT_PARA;
{$EXTERNALSYM CMSG_CTRL_MAIL_LIST_DECRYPT_PARA}
TCmsgCtrlMailListDecryptPara = CMSG_CTRL_MAIL_LIST_DECRYPT_PARA;
PCmsgCtrlMailListDecryptPara = PCMSG_CTRL_MAIL_LIST_DECRYPT_PARA;
//+-------------------------------------------------------------------------
// CMSG_CTRL_VERIFY_HASH
//
// Verify the hash of a HASHED message after it has been decoded.
//
// Only the hCryptMsg parameter is used, to specify the message whose
// hash is being verified.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_CTRL_ADD_SIGNER
//
// Add a signer to a signed-data message.
//
// pvCtrlPara points to a CMSG_SIGNER_ENCODE_INFO.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_CTRL_ADD_CMS_SIGNER_INFO
//
// Add a signer to a signed-data message.
//
// Differs from the above, CMSG_CTRL_ADD_SIGNER, wherein, the signer info
// already contains the signature.
//
// pvCtrlPara points to a CMSG_CMS_SIGNER_INFO.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_CTRL_DEL_SIGNER
//
// Remove a signer from a signed-data or signed-and-enveloped-data message.
//
// pvCtrlPara points to a DWORD containing the 0-based index of the
// signer to be removed.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_CTRL_ADD_SIGNER_UNAUTH_ATTR
//
// Add an unauthenticated attribute to the SignerInfo of a signed-data or
// signed-and-enveloped-data message.
//
// The unauthenticated attribute is input in the form of an encoded blob.
//--------------------------------------------------------------------------
PCMSG_CTRL_ADD_SIGNER_UNAUTH_ATTR_PARA = ^CMSG_CTRL_ADD_SIGNER_UNAUTH_ATTR_PARA;
{$EXTERNALSYM PCMSG_CTRL_ADD_SIGNER_UNAUTH_ATTR_PARA}
_CMSG_CTRL_ADD_SIGNER_UNAUTH_ATTR_PARA = record
cbSize: DWORD;
dwSignerIndex: DWORD;
blob: CRYPT_DATA_BLOB;
end;
{$EXTERNALSYM _CMSG_CTRL_ADD_SIGNER_UNAUTH_ATTR_PARA}
CMSG_CTRL_ADD_SIGNER_UNAUTH_ATTR_PARA = _CMSG_CTRL_ADD_SIGNER_UNAUTH_ATTR_PARA;
{$EXTERNALSYM CMSG_CTRL_ADD_SIGNER_UNAUTH_ATTR_PARA}
TCmsgCtrlAddSignerUnauthAttrPara = CMSG_CTRL_ADD_SIGNER_UNAUTH_ATTR_PARA;
PCmsgCtrlAddSignerUnauthAttrPara = PCMSG_CTRL_ADD_SIGNER_UNAUTH_ATTR_PARA;
//+-------------------------------------------------------------------------
// CMSG_CTRL_DEL_SIGNER_UNAUTH_ATTR
//
// Delete an unauthenticated attribute from the SignerInfo of a signed-data
// or signed-and-enveloped-data message.
//
// The unauthenticated attribute to be removed is specified by
// a 0-based index.
//--------------------------------------------------------------------------
PCMSG_CTRL_DEL_SIGNER_UNAUTH_ATTR_PARA = ^CMSG_CTRL_DEL_SIGNER_UNAUTH_ATTR_PARA;
{$EXTERNALSYM PCMSG_CTRL_DEL_SIGNER_UNAUTH_ATTR_PARA}
_CMSG_CTRL_DEL_SIGNER_UNAUTH_ATTR_PARA = record
cbSize: DWORD;
dwSignerIndex: DWORD;
dwUnauthAttrIndex: DWORD;
end;
{$EXTERNALSYM _CMSG_CTRL_DEL_SIGNER_UNAUTH_ATTR_PARA}
CMSG_CTRL_DEL_SIGNER_UNAUTH_ATTR_PARA = _CMSG_CTRL_DEL_SIGNER_UNAUTH_ATTR_PARA;
{$EXTERNALSYM CMSG_CTRL_DEL_SIGNER_UNAUTH_ATTR_PARA}
TCmsgCtrlDelSignerUnauthAttrPara = CMSG_CTRL_DEL_SIGNER_UNAUTH_ATTR_PARA;
PCmsgCtrlDelSignerUnauthAttrPara = PCMSG_CTRL_DEL_SIGNER_UNAUTH_ATTR_PARA;
//+-------------------------------------------------------------------------
// CMSG_CTRL_ADD_CERT
//
// Add a certificate to a signed-data or signed-and-enveloped-data message.
//
// pvCtrlPara points to a CRYPT_DATA_BLOB containing the certificate's
// encoded bytes.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_CTRL_DEL_CERT
//
// Delete a certificate from a signed-data or signed-and-enveloped-data
// message.
//
// pvCtrlPara points to a DWORD containing the 0-based index of the
// certificate to be removed.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_CTRL_ADD_CRL
//
// Add a CRL to a signed-data or signed-and-enveloped-data message.
//
// pvCtrlPara points to a CRYPT_DATA_BLOB containing the CRL's
// encoded bytes.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_CTRL_DEL_CRL
//
// Delete a CRL from a signed-data or signed-and-enveloped-data message.
//
// pvCtrlPara points to a DWORD containing the 0-based index of the CRL
// to be removed.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_CTRL_ADD_ATTR_CERT
//
// Add an attribute certificate to a signed-data message.
//
// pvCtrlPara points to a CRYPT_DATA_BLOB containing the attribute
// certificate's encoded bytes.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CMSG_CTRL_DEL_ATTR_CERT
//
// Delete an attribute certificate from a signed-data message.
//
// pvCtrlPara points to a DWORD containing the 0-based index of the
// attribute certificate to be removed.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// Verify a countersignature, at the SignerInfo level.
// ie. verify that pbSignerInfoCountersignature contains the encrypted
// hash of the encryptedDigest field of pbSignerInfo.
//
// hCryptProv is used to hash the encryptedDigest field of pbSignerInfo.
// The only fields referenced from pciCountersigner are SerialNumber, Issuer,
// and SubjectPublicKeyInfo.
//--------------------------------------------------------------------------
function CryptMsgVerifyCountersignatureEncoded(hCryptProv: HCRYPTPROV;
dwEncodingType: DWORD; pbSignerInfo: PBYTE; cbSignerInfo: DWORD;
pbSignerInfoCountersignature: PBYTE; cbSignerInfoCountersignature: DWORD;
pciCountersigner: PCERT_INFO): BOOL; stdcall;
{$EXTERNALSYM CryptMsgVerifyCountersignatureEncoded}
//+-------------------------------------------------------------------------
// Verify a countersignature, at the SignerInfo level.
// ie. verify that pbSignerInfoCountersignature contains the encrypted
// hash of the encryptedDigest field of pbSignerInfo.
//
// hCryptProv is used to hash the encryptedDigest field of pbSignerInfo.
//
// The signer can be a CERT_PUBLIC_KEY_INFO, certificate context or a
// chain context.
//--------------------------------------------------------------------------
function CryptMsgVerifyCountersignatureEncodedEx(hCryptProv: HCRYPTPROV;
dwEncodingType: DWORD; pbSignerInfo: PBYTE; cbSignerInfo: DWORD;
pbSignerInfoCountersignature: PBYTE; cbSignerInfoCountersignature: DWORD;
dwSignerType: DWORD; pvSigner: Pointer; dwFlags: DWORD; pvReserved: Pointer): BOOL; stdcall;
{$EXTERNALSYM CryptMsgVerifyCountersignatureEncodedEx}
// See CMSG_CTRL_VERIFY_SIGNATURE_EX_PARA for dwSignerType definitions
//+-------------------------------------------------------------------------
// Countersign an already-existing signature in a message
//
// dwIndex is a zero-based index of the SignerInfo to be countersigned.
//--------------------------------------------------------------------------
function CryptMsgCountersign(hCryptMsg: HCRYPTMSG; dwIndex, cCountersigners: DWORD;
rgCountersigners: PCMSG_SIGNER_ENCODE_INFO): BOOL; stdcall;
{$EXTERNALSYM CryptMsgCountersign}
//+-------------------------------------------------------------------------
// Countersign an already-existing signature (encoded SignerInfo).
// Output an encoded SignerInfo blob, suitable for use as a countersignature
// attribute in the unauthenticated attributes of a signed-data or
// signed-and-enveloped-data message.
//--------------------------------------------------------------------------
function CryptMsgCountersignEncoded(dwEncodingType: DWORD; pbSignerInfo: PBYTE;
cbSignerInfo: DWORD; cCountersigners: DWORD; rgCountersigners: PCMSG_SIGNER_ENCODE_INFO;
pbCountersignature: PBYTE; var pcbCountersignature: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptMsgCountersignEncoded}
//+-------------------------------------------------------------------------
// CryptMsg OID installable functions
//--------------------------------------------------------------------------
type
PFN_CMSG_ALLOC = function(cb: size_t): Pointer; stdcall;
{$EXTERNALSYM PFN_CMSG_ALLOC}
PFnCMsgAlloc = PFN_CMSG_ALLOC;
PFN_CMSG_FREE = procedure(pv: Pointer); stdcall;
{$EXTERNALSYM PFN_CMSG_FREE}
PFnCMsgFree = PFN_CMSG_FREE;
// Note, the following 3 installable functions are obsolete and have been
// replaced with GenContentEncryptKey, ExportKeyTrans, ExportKeyAgree,
// ExportMailList, ImportKeyTrans, ImportKeyAgree and ImportMailList
// installable functions.
// If *phCryptProv is NULL upon entry, then, if supported, the installable
// function should acquire a default provider and return. Note, its up
// to the installable function to release at process detach.
//
// If paiEncrypt->Parameters.cbData is 0, then, the callback may optionally
// return default encoded parameters in *ppbEncryptParameters and
// *pcbEncryptParameters. pfnAlloc must be called for the allocation.
const
CMSG_OID_GEN_ENCRYPT_KEY_FUNC = 'CryptMsgDllGenEncryptKey';
{$EXTERNALSYM CMSG_OID_GEN_ENCRYPT_KEY_FUNC}
type
PFN_CMSG_GEN_ENCRYPT_KEY = function(phCryptProv: PHCRYPTPROV;
paiEncrypt: PCRYPT_ALGORITHM_IDENTIFIER; pvEncryptAuxInfo: PVOID;
pPublicKeyInfo: PCERT_PUBLIC_KEY_INFO; pfnAlloc: PFN_CMSG_ALLOC;
var phEncryptKey: HCRYPTKEY; var ppbEncryptParameters: PBYTE;
pcbEncryptParameters: PDWORD): BOOL; stdcall;
{$EXTERNALSYM PFN_CMSG_GEN_ENCRYPT_KEY}
PfnCmsgGenEncryptKey = PFN_CMSG_GEN_ENCRYPT_KEY;
const
CMSG_OID_EXPORT_ENCRYPT_KEY_FUNC = 'CryptMsgDllExportEncryptKey';
{$EXTERNALSYM CMSG_OID_EXPORT_ENCRYPT_KEY_FUNC}
type
PFN_CMSG_EXPORT_ENCRYPT_KEY = function(hCryptProv: HCRYPTPROV;
hEncryptKey: HCRYPTKEY; pPublicKeyInfo: PCERT_PUBLIC_KEY_INFO;
pbData: PBYTE; var pcbData: DWORD): BOOL; stdcall;
{$EXTERNALSYM PFN_CMSG_EXPORT_ENCRYPT_KEY}
PfnCmsgExportEncryptKey = PFN_CMSG_EXPORT_ENCRYPT_KEY;
const
CMSG_OID_IMPORT_ENCRYPT_KEY_FUNC = 'CryptMsgDllImportEncryptKey';
{$EXTERNALSYM CMSG_OID_IMPORT_ENCRYPT_KEY_FUNC}
type
PFN_CMSG_IMPORT_ENCRYPT_KEY = function(hCryptProv: HCRYPTPROV;
dwKeySpec: DWORD; paiEncrypt: PCRYPT_ALGORITHM_IDENTIFIER;
paiPubKey: PCRYPT_ALGORITHM_IDENTIFIER; pbEncodedKey: PBYTE;
cbEncodedKey: DWORD; var phEncryptKey: HCRYPTKEY): BOOL; stdcall;
{$EXTERNALSYM PFN_CMSG_IMPORT_ENCRYPT_KEY}
PfnCmsgImportEncryptKey = PFN_CMSG_IMPORT_ENCRYPT_KEY;
// To get the default installable function for GenContentEncryptKey,
// ExportKeyTrans, ExportKeyAgree, ExportMailList, ImportKeyTrans,
// ImportKeyAgree or ImportMailList call CryptGetOIDFunctionAddress()
// with the pszOID argument set to the following constant. dwEncodingType
// should be set to CRYPT_ASN_ENCODING or X509_ASN_ENCODING.
const
CMSG_DEFAULT_INSTALLABLE_FUNC_OID = LPCSTR(1);
{$EXTERNALSYM CMSG_DEFAULT_INSTALLABLE_FUNC_OID}
//+-------------------------------------------------------------------------
// Content Encrypt Info
//
// The following data structure contains the information shared between
// the GenContentEncryptKey and the ExportKeyTrans, ExportKeyAgree and
// ExportMailList installable functions.
//--------------------------------------------------------------------------
type
PCMSG_CONTENT_ENCRYPT_INFO = ^CMSG_CONTENT_ENCRYPT_INFO;
{$EXTERNALSYM PCMSG_CONTENT_ENCRYPT_INFO}
_CMSG_CONTENT_ENCRYPT_INFO = record
cbSize: DWORD;
hCryptProv: HCRYPTPROV;
ContentEncryptionAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
pvEncryptionAuxInfo: Pointer;
cRecipients: DWORD;
rgCmsRecipients: PCMSG_RECIPIENT_ENCODE_INFO;
pfnAlloc: PFN_CMSG_ALLOC;
pfnFree: PFN_CMSG_FREE;
dwEncryptFlags: DWORD;
hContentEncryptKey: HCRYPTKEY;
dwFlags: DWORD;
end;
{$EXTERNALSYM _CMSG_CONTENT_ENCRYPT_INFO}
CMSG_CONTENT_ENCRYPT_INFO = _CMSG_CONTENT_ENCRYPT_INFO;
{$EXTERNALSYM CMSG_CONTENT_ENCRYPT_INFO}
TCmsgContentEncryptInfo = CMSG_CONTENT_ENCRYPT_INFO;
PCmsgContentEncryptInfo = PCMSG_CONTENT_ENCRYPT_INFO;
const
CMSG_CONTENT_ENCRYPT_PAD_ENCODED_LEN_FLAG = $00000001;
{$EXTERNALSYM CMSG_CONTENT_ENCRYPT_PAD_ENCODED_LEN_FLAG}
CMSG_CONTENT_ENCRYPT_FREE_PARA_FLAG = $00000001;
{$EXTERNALSYM CMSG_CONTENT_ENCRYPT_FREE_PARA_FLAG}
CMSG_CONTENT_ENCRYPT_RELEASE_CONTEXT_FLAG = $00008000;
{$EXTERNALSYM CMSG_CONTENT_ENCRYPT_RELEASE_CONTEXT_FLAG}
//+-------------------------------------------------------------------------
// Upon input, ContentEncryptInfo has been initialized from the
// EnvelopedEncodeInfo.
//
// Note, if rgpRecipients instead of rgCmsRecipients are set in the
// EnvelopedEncodeInfo, then, the rgpRecipients have been converted
// to rgCmsRecipients in the ContentEncryptInfo.
//
// The following fields may be changed in ContentEncryptInfo:
// hContentEncryptKey
// hCryptProv
// ContentEncryptionAlgorithm.Parameters
// dwFlags
//
// All other fields in the ContentEncryptInfo are READONLY.
//
// If CMSG_CONTENT_ENCRYPT_PAD_ENCODED_LEN_FLAG is set upon entry
// in dwEncryptFlags, then, any potentially variable length encoded
// output should be padded with zeroes to always obtain the
// same maximum encoded length. This is necessary for
// CryptMsgCalculateEncodedLength() or CryptMsgOpenToEncode() with
// definite length streaming.
//
// The hContentEncryptKey must be updated.
//
// If hCryptProv is NULL upon input, then, it must be updated.
// If a HCRYPTPROV is acquired that must be released, then, the
// CMSG_CONTENT_ENCRYPT_RELEASE_CONTEXT_FLAG must be set in dwFlags.
//
// If ContentEncryptionAlgorithm.Parameters is updated, then, the
// CMSG_CONTENT_ENCRYPT_FREE_PARA_FLAG must be set in dwFlags. pfnAlloc and
// pfnFree must be used for doing the allocation.
//
// ContentEncryptionAlgorithm.pszObjId is used to get the OIDFunctionAddress.
//--------------------------------------------------------------------------
const
CMSG_OID_GEN_CONTENT_ENCRYPT_KEY_FUNC = 'CryptMsgDllGenContentEncryptKey';
{$EXTERNALSYM CMSG_OID_GEN_CONTENT_ENCRYPT_KEY_FUNC}
type
PFN_CMSG_GEN_CONTENT_ENCRYPT_KEY = function(pContentEncryptInfo: PCMSG_CONTENT_ENCRYPT_INFO;
dwFlags: DWORD; pvReserved: PPointer): BOOL; stdcall;
{$EXTERNALSYM PFN_CMSG_GEN_CONTENT_ENCRYPT_KEY}
PfnCmsgGenContentEncryptKey = PFN_CMSG_GEN_CONTENT_ENCRYPT_KEY;
//+-------------------------------------------------------------------------
// Key Transport Encrypt Info
//
// The following data structure contains the information updated by the
// ExportKeyTrans installable function.
//--------------------------------------------------------------------------
type
PCMSG_KEY_TRANS_ENCRYPT_INFO = ^CMSG_KEY_TRANS_ENCRYPT_INFO;
{$EXTERNALSYM PCMSG_KEY_TRANS_ENCRYPT_INFO}
_CMSG_KEY_TRANS_ENCRYPT_INFO = record
cbSize: DWORD;
dwRecipientIndex: DWORD;
KeyEncryptionAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
EncryptedKey: CRYPT_DATA_BLOB;
dwFlags: DWORD;
end;
{$EXTERNALSYM _CMSG_KEY_TRANS_ENCRYPT_INFO}
CMSG_KEY_TRANS_ENCRYPT_INFO = _CMSG_KEY_TRANS_ENCRYPT_INFO;
{$EXTERNALSYM CMSG_KEY_TRANS_ENCRYPT_INFO}
TCmsgKeyTransEncryptInfo = CMSG_KEY_TRANS_ENCRYPT_INFO;
PCmsgKeyTransEncryptInfo = PCMSG_KEY_TRANS_ENCRYPT_INFO;
const
CMSG_KEY_TRANS_ENCRYPT_FREE_PARA_FLAG = $00000001;
{$EXTERNALSYM CMSG_KEY_TRANS_ENCRYPT_FREE_PARA_FLAG}
//+-------------------------------------------------------------------------
// Upon input, KeyTransEncryptInfo has been initialized from the
// KeyTransEncodeInfo.
//
// The following fields may be changed in KeyTransEncryptInfo:
// EncryptedKey
// KeyEncryptionAlgorithm.Parameters
// dwFlags
//
// All other fields in the KeyTransEncryptInfo are READONLY.
//
// The EncryptedKey must be updated. The pfnAlloc and pfnFree specified in
// ContentEncryptInfo must be used for doing the allocation.
//
// If the KeyEncryptionAlgorithm.Parameters is updated, then, the
// CMSG_KEY_TRANS_ENCRYPT_FREE_PARA_FLAG must be set in dwFlags.
// The pfnAlloc and pfnFree specified in ContentEncryptInfo must be used
// for doing the allocation.
//
// KeyEncryptionAlgorithm.pszObjId is used to get the OIDFunctionAddress.
//--------------------------------------------------------------------------
const
CMSG_OID_EXPORT_KEY_TRANS_FUNC = 'CryptMsgDllExportKeyTrans';
{$EXTERNALSYM CMSG_OID_EXPORT_KEY_TRANS_FUNC}
type
PFN_CMSG_EXPORT_KEY_TRANS = function(pContentEncryptInfo: PCMSG_CONTENT_ENCRYPT_INFO;
pKeyTransEncodeInfo: PCMSG_KEY_TRANS_RECIPIENT_ENCODE_INFO;
pKeyTransEncryptInfo: PCMSG_KEY_TRANS_ENCRYPT_INFO; dwFlags: DWORD;
pvReserved: Pointer): BOOL; stdcall;
{$EXTERNALSYM PFN_CMSG_EXPORT_KEY_TRANS}
PfnCmsgExportKeyTrans = PFN_CMSG_EXPORT_KEY_TRANS;
//+-------------------------------------------------------------------------
// Key Agree Key Encrypt Info
//
// The following data structure contains the information updated by the
// ExportKeyAgree installable function for each encrypted key agree
// recipient.
//--------------------------------------------------------------------------
type
PCMSG_KEY_AGREE_KEY_ENCRYPT_INFO = ^CMSG_KEY_AGREE_KEY_ENCRYPT_INFO;
{$EXTERNALSYM PCMSG_KEY_AGREE_KEY_ENCRYPT_INFO}
_CMSG_KEY_AGREE_KEY_ENCRYPT_INFO = record
cbSize: DWORD;
EncryptedKey: CRYPT_DATA_BLOB;
end;
{$EXTERNALSYM _CMSG_KEY_AGREE_KEY_ENCRYPT_INFO}
CMSG_KEY_AGREE_KEY_ENCRYPT_INFO = _CMSG_KEY_AGREE_KEY_ENCRYPT_INFO;
{$EXTERNALSYM CMSG_KEY_AGREE_KEY_ENCRYPT_INFO}
TCmsgKeyAgreeKeyEncryptInfo = CMSG_KEY_AGREE_KEY_ENCRYPT_INFO;
PCmsgKeyAgreeKeyEncryptInfo = PCMSG_KEY_AGREE_KEY_ENCRYPT_INFO;
PPCMSG_KEY_AGREE_KEY_ENCRYPT_INFO = ^PCMSG_KEY_AGREE_KEY_ENCRYPT_INFO;
{$NODEFINE PPCMSG_KEY_AGREE_KEY_ENCRYPT_INFO}
//+-------------------------------------------------------------------------
// Key Agree Encrypt Info
//
// The following data structure contains the information applicable to
// all recipients. Its updated by the ExportKeyAgree installable function.
//--------------------------------------------------------------------------
PCMSG_KEY_AGREE_ENCRYPT_INFO = ^CMSG_KEY_AGREE_ENCRYPT_INFO;
{$EXTERNALSYM PCMSG_KEY_AGREE_ENCRYPT_INFO}
_CMSG_KEY_AGREE_ENCRYPT_INFO = record
cbSize: DWORD;
dwRecipientIndex: DWORD;
KeyEncryptionAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
UserKeyingMaterial: CRYPT_DATA_BLOB;
dwOriginatorChoice: DWORD;
Union: record
case Integer of
// CMSG_KEY_AGREE_ORIGINATOR_CERT
0: (OriginatorCertId: CERT_ID);
// CMSG_KEY_AGREE_ORIGINATOR_PUBLIC_KEY
1: (OriginatorPublicKeyInfo: CERT_PUBLIC_KEY_INFO);
end;
cKeyAgreeKeyEncryptInfo: DWORD;
rgpKeyAgreeKeyEncryptInfo: PPCMSG_KEY_AGREE_KEY_ENCRYPT_INFO;
dwFlags: DWORD;
end;
{$EXTERNALSYM _CMSG_KEY_AGREE_ENCRYPT_INFO}
CMSG_KEY_AGREE_ENCRYPT_INFO = _CMSG_KEY_AGREE_ENCRYPT_INFO;
{$EXTERNALSYM CMSG_KEY_AGREE_ENCRYPT_INFO}
TCmsgKeyAgreeEncryptInfo = CMSG_KEY_AGREE_ENCRYPT_INFO;
PCmsgKeyAgreeEncryptInfo = PCMSG_KEY_AGREE_ENCRYPT_INFO;
const
CMSG_KEY_AGREE_ENCRYPT_FREE_PARA_FLAG = $00000001;
{$EXTERNALSYM CMSG_KEY_AGREE_ENCRYPT_FREE_PARA_FLAG}
CMSG_KEY_AGREE_ENCRYPT_FREE_MATERIAL_FLAG = $00000002;
{$EXTERNALSYM CMSG_KEY_AGREE_ENCRYPT_FREE_MATERIAL_FLAG}
CMSG_KEY_AGREE_ENCRYPT_FREE_PUBKEY_ALG_FLAG = $00000004;
{$EXTERNALSYM CMSG_KEY_AGREE_ENCRYPT_FREE_PUBKEY_ALG_FLAG}
CMSG_KEY_AGREE_ENCRYPT_FREE_PUBKEY_PARA_FLAG = $00000008;
{$EXTERNALSYM CMSG_KEY_AGREE_ENCRYPT_FREE_PUBKEY_PARA_FLAG}
CMSG_KEY_AGREE_ENCRYPT_FREE_PUBKEY_BITS_FLAG = $00000010;
{$EXTERNALSYM CMSG_KEY_AGREE_ENCRYPT_FREE_PUBKEY_BITS_FLAG}
//+-------------------------------------------------------------------------
// Upon input, KeyAgreeEncryptInfo has been initialized from the
// KeyAgreeEncodeInfo.
//
// The following fields may be changed in KeyAgreeEncryptInfo:
// KeyEncryptionAlgorithm.Parameters
// UserKeyingMaterial
// dwOriginatorChoice
// OriginatorCertId
// OriginatorPublicKeyInfo
// dwFlags
//
// All other fields in the KeyAgreeEncryptInfo are READONLY.
//
// If the KeyEncryptionAlgorithm.Parameters is updated, then, the
// CMSG_KEY_AGREE_ENCRYPT_FREE_PARA_FLAG must be set in dwFlags.
// The pfnAlloc and pfnFree specified in ContentEncryptInfo must be used
// for doing the allocation.
//
// If the UserKeyingMaterial is updated, then, the
// CMSG_KEY_AGREE_ENCRYPT_FREE_MATERIAL_FLAG must be set in dwFlags.
// pfnAlloc and pfnFree must be used for doing the allocation.
//
// The dwOriginatorChoice must be updated to either
// CMSG_KEY_AGREE_ORIGINATOR_CERT or CMSG_KEY_AGREE_ORIGINATOR_PUBLIC_KEY.
//
// If the OriginatorPublicKeyInfo is updated, then, the appropriate
// CMSG_KEY_AGREE_ENCRYPT_FREE_PUBKEY_*_FLAG must be set in dwFlags and
// pfnAlloc and pfnFree must be used for doing the allocation.
//
// If CMSG_CONTENT_ENCRYPT_PAD_ENCODED_LEN_FLAG is set upon entry
// in pContentEncryptInfo->dwEncryptFlags, then, the OriginatorPublicKeyInfo's
// Ephemeral PublicKey should be padded with zeroes to always obtain the
// same maximum encoded length. Note, the length of the generated ephemeral Y
// public key can vary depending on the number of leading zero bits.
//
// Upon input, the array of *rgpKeyAgreeKeyEncryptInfo has been initialized.
// The EncryptedKey must be updated for each recipient key.
// The pfnAlloc and pfnFree specified in
// ContentEncryptInfo must be used for doing the allocation.
//
// KeyEncryptionAlgorithm.pszObjId is used to get the OIDFunctionAddress.
//--------------------------------------------------------------------------
const
CMSG_OID_EXPORT_KEY_AGREE_FUNC = 'CryptMsgDllExportKeyAgree';
{$EXTERNALSYM CMSG_OID_EXPORT_KEY_AGREE_FUNC}
type
PFN_CMSG_EXPORT_KEY_AGREE = function(pContentEncryptInfo: PCMSG_CONTENT_ENCRYPT_INFO;
pKeyAgreeEncodeInfo: PCMSG_KEY_AGREE_RECIPIENT_ENCODE_INFO;
pKeyAgreeEncryptInfo: PCMSG_KEY_AGREE_ENCRYPT_INFO; dwFlags: DWORD;
pvReserved: Pointer): BOOL; stdcall;
{$EXTERNALSYM PFN_CMSG_EXPORT_KEY_AGREE}
PfnCmsgExportKeyAgree = PFN_CMSG_EXPORT_KEY_AGREE;
//+-------------------------------------------------------------------------
// Mail List Encrypt Info
//
// The following data structure contains the information updated by the
// ExportMailList installable function.
//--------------------------------------------------------------------------
type
PCMSG_MAIL_LIST_ENCRYPT_INFO = ^CMSG_MAIL_LIST_ENCRYPT_INFO;
{$EXTERNALSYM PCMSG_MAIL_LIST_ENCRYPT_INFO}
_CMSG_MAIL_LIST_ENCRYPT_INFO = record
cbSize: DWORD;
dwRecipientIndex: DWORD;
KeyEncryptionAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
EncryptedKey: CRYPT_DATA_BLOB;
dwFlags: DWORD;
end;
{$EXTERNALSYM _CMSG_MAIL_LIST_ENCRYPT_INFO}
CMSG_MAIL_LIST_ENCRYPT_INFO = _CMSG_MAIL_LIST_ENCRYPT_INFO;
{$EXTERNALSYM CMSG_MAIL_LIST_ENCRYPT_INFO}
TCmsgMailListEncryptInfo = CMSG_MAIL_LIST_ENCRYPT_INFO;
PCmsgMailListEncryptInfo = PCMSG_MAIL_LIST_ENCRYPT_INFO;
const
CMSG_MAIL_LIST_ENCRYPT_FREE_PARA_FLAG = $00000001;
{$EXTERNALSYM CMSG_MAIL_LIST_ENCRYPT_FREE_PARA_FLAG}
//+-------------------------------------------------------------------------
// Upon input, MailListEncryptInfo has been initialized from the
// MailListEncodeInfo.
//
// The following fields may be changed in MailListEncryptInfo:
// EncryptedKey
// KeyEncryptionAlgorithm.Parameters
// dwFlags
//
// All other fields in the MailListEncryptInfo are READONLY.
//
// The EncryptedKey must be updated. The pfnAlloc and pfnFree specified in
// ContentEncryptInfo must be used for doing the allocation.
//
// If the KeyEncryptionAlgorithm.Parameters is updated, then, the
// CMSG_MAIL_LIST_ENCRYPT_FREE_PARA_FLAG must be set in dwFlags.
// The pfnAlloc and pfnFree specified in ContentEncryptInfo must be used
// for doing the allocation.
//
// KeyEncryptionAlgorithm.pszObjId is used to get the OIDFunctionAddress.
//--------------------------------------------------------------------------
const
CMSG_OID_EXPORT_MAIL_LIST_FUNC = 'CryptMsgDllExportMailList';
{$EXTERNALSYM CMSG_OID_EXPORT_MAIL_LIST_FUNC}
type
PFN_CMSG_EXPORT_MAIL_LIST = function(pContentEncryptInfo: PCMSG_CONTENT_ENCRYPT_INFO;
pMailListEncodeInfo: PCMSG_MAIL_LIST_RECIPIENT_ENCODE_INFO;
pMailListEncryptInfo: PCMSG_MAIL_LIST_ENCRYPT_INFO; dwFlags: DWORD;
pvReserved: Pointer): BOOL; stdcall;
{$EXTERNALSYM PFN_CMSG_EXPORT_MAIL_LIST}
PfnCmsgExportMailList = PFN_CMSG_EXPORT_MAIL_LIST;
//+-------------------------------------------------------------------------
// OID Installable functions for importing an encoded and encrypted content
// encryption key.
//
// There's a different installable function for each CMS Recipient choice:
// ImportKeyTrans
// ImportKeyAgree
// ImportMailList
//
// Iterates through the following OIDs to get the OID installable function:
// KeyEncryptionOID!ContentEncryptionOID
// KeyEncryptionOID
// ContentEncryptionOID
//
// If the OID installable function doesn't support the specified
// KeyEncryption and ContentEncryption OIDs, then, return FALSE with
// LastError set to E_NOTIMPL.
//--------------------------------------------------------------------------
const
CMSG_OID_IMPORT_KEY_TRANS_FUNC = 'CryptMsgDllImportKeyTrans';
{$EXTERNALSYM CMSG_OID_IMPORT_KEY_TRANS_FUNC}
type
PFN_CMSG_IMPORT_KEY_TRANS = function(pContentEncryptionAlgorithm: PCRYPT_ALGORITHM_IDENTIFIER;
pKeyTransDecryptPara: PCMSG_CTRL_KEY_TRANS_DECRYPT_PARA; dwFlags: DWORD;
pvReserved: Pointer; var phContentEncryptKey: HCRYPTKEY): BOOL; stdcall;
{$EXTERNALSYM PFN_CMSG_IMPORT_KEY_TRANS}
PfnCmsgImportKeyTrans = PFN_CMSG_IMPORT_KEY_TRANS;
const
CMSG_OID_IMPORT_KEY_AGREE_FUNC = 'CryptMsgDllImportKeyAgree';
{$EXTERNALSYM CMSG_OID_IMPORT_KEY_AGREE_FUNC}
type
PFN_CMSG_IMPORT_KEY_AGREE = function(pContentEncryptionAlgorithm: PCRYPT_ALGORITHM_IDENTIFIER;
pKeyAgreeDecryptPara: PCMSG_CTRL_KEY_AGREE_DECRYPT_PARA; dwFlags: DWORD;
pvReserved: Pointer; var phContentEncryptKey: HCRYPTKEY): BOOL; stdcall;
{$EXTERNALSYM PFN_CMSG_IMPORT_KEY_AGREE}
PfnCmsgImportKeyAgree = PFN_CMSG_IMPORT_KEY_AGREE;
const
CMSG_OID_IMPORT_MAIL_LIST_FUNC = 'CryptMsgDllImportMailList';
{$EXTERNALSYM CMSG_OID_IMPORT_MAIL_LIST_FUNC}
type
PFN_CMSG_IMPORT_MAIL_LIST = function(pContentEncryptionAlgorithm: PCRYPT_ALGORITHM_IDENTIFIER;
pMailListDecryptPara: PCMSG_CTRL_MAIL_LIST_DECRYPT_PARA; dwFlags: DWORD;
pvReserved: Pointer; var phContentEncryptKey: HCRYPTKEY): BOOL; stdcall;
{$EXTERNALSYM PFN_CMSG_IMPORT_MAIL_LIST}
PfnCmsgImportMailList = PFN_CMSG_IMPORT_MAIL_LIST;
//+=========================================================================
// Certificate Store Data Structures and APIs
//==========================================================================
//+-------------------------------------------------------------------------
// In its most basic implementation, a cert store is simply a
// collection of certificates and/or CRLs. This is the case when
// a cert store is opened with all of its certificates and CRLs
// coming from a PKCS #7 encoded cryptographic message.
//
// Nonetheless, all cert stores have the following properties:
// - A public key may have more than one certificate in the store.
// For example, a private/public key used for signing may have a
// certificate issued for VISA and another issued for
// Mastercard. Also, when a certificate is renewed there might
// be more than one certificate with the same subject and
// issuer.
// - However, each certificate in the store is uniquely
// identified by its Issuer and SerialNumber.
// - There's an issuer of subject certificate relationship. A
// certificate's issuer is found by doing a match of
// pSubjectCert->Issuer with pIssuerCert->Subject.
// The relationship is verified by using
// the issuer's public key to verify the subject certificate's
// signature. Note, there might be X.509 v3 extensions
// to assist in finding the issuer certificate.
// - Since issuer certificates might be renewed, a subject
// certificate might have more than one issuer certificate.
// - There's an issuer of CRL relationship. An
// issuer's CRL is found by doing a match of
// pIssuerCert->Subject with pCrl->Issuer.
// The relationship is verified by using
// the issuer's public key to verify the CRL's
// signature. Note, there might be X.509 v3 extensions
// to assist in finding the CRL.
// - Since some issuers might support the X.509 v3 delta CRL
// extensions, an issuer might have more than one CRL.
// - The store shouldn't have any redundant certificates or
// CRLs. There shouldn't be two certificates with the same
// Issuer and SerialNumber. There shouldn't be two CRLs with
// the same Issuer, ThisUpdate and NextUpdate.
// - The store has NO policy or trust information. No
// certificates are tagged as being "root". Its up to
// the application to maintain a list of CertIds (Issuer +
// SerialNumber) for certificates it trusts.
// - The store might contain bad certificates and/or CRLs.
// The issuer's signature of a subject certificate or CRL may
// not verify. Certificates or CRLs may not satisfy their
// time validity requirements. Certificates may be
// revoked.
//
// In addition to the certificates and CRLs, properties can be
// stored. There are two predefined property IDs for a user
// certificate: CERT_KEY_PROV_HANDLE_PROP_ID and
// CERT_KEY_PROV_INFO_PROP_ID. The CERT_KEY_PROV_HANDLE_PROP_ID
// is a HCRYPTPROV handle to the private key assoicated
// with the certificate. The CERT_KEY_PROV_INFO_PROP_ID contains
// information to be used to call
// CryptAcquireContext and CryptSetProvParam to get a handle
// to the private key associated with the certificate.
//
// There exists two more predefined property IDs for certificates
// and CRLs, CERT_SHA1_HASH_PROP_ID and CERT_MD5_HASH_PROP_ID.
// If these properties don't already exist, then, a hash of the
// content is computed. (CERT_HASH_PROP_ID maps to the default
// hash algorithm, currently, CERT_SHA1_HASH_PROP_ID).
//
// There are additional APIs for creating certificate and CRL
// contexts not in a store (CertCreateCertificateContext and
// CertCreateCRLContext).
//
//--------------------------------------------------------------------------
type
HCERTSTORE = Pointer;
{$EXTERNALSYM HCERTSTORE}
PHCERTSTORE = ^HCERTSTORE;
{$NODEFINE PHCERTSTORE}
//+-------------------------------------------------------------------------
// Certificate context.
//
// A certificate context contains both the encoded and decoded representation
// of a certificate. A certificate context returned by a cert store function
// must be freed by calling the CertFreeCertificateContext function. The
// CertDuplicateCertificateContext function can be called to make a duplicate
// copy (which also must be freed by calling CertFreeCertificateContext).
//--------------------------------------------------------------------------
PCERT_CONTEXT = ^CERT_CONTEXT;
{$EXTERNALSYM CERT_CONTEXT}
_CERT_CONTEXT = record
dwCertEncodingType: DWORD;
pbCertEncoded: LPBYTE;
cbCertEncoded: DWORD;
pCertInfo: PCERT_INFO;
hCertStore: HCERTSTORE;
end;
{$EXTERNALSYM _CERT_CONTEXT}
CERT_CONTEXT = _CERT_CONTEXT;
{$EXTERNALSYM CERT_CONTEXT}
TCertContext = CERT_CONTEXT;
PCertContext = PCERT_CONTEXT;
PCCERT_CONTEXT = PCERT_CONTEXT;
{$EXTERNALSYM PCCERT_CONTEXT}
PPCCERT_CONTEXT = ^PCCERT_CONTEXT;
{$NODEFINE PCCERT_CONTEXT}
//+-------------------------------------------------------------------------
// CRL context.
//
// A CRL context contains both the encoded and decoded representation
// of a CRL. A CRL context returned by a cert store function
// must be freed by calling the CertFreeCRLContext function. The
// CertDuplicateCRLContext function can be called to make a duplicate
// copy (which also must be freed by calling CertFreeCRLContext).
//--------------------------------------------------------------------------
PCRL_CONTEXT = ^CRL_CONTEXT;
{$EXTERNALSYM PCRL_CONTEXT}
_CRL_CONTEXT = record
dwCertEncodingType: DWORD;
pbCrlEncoded: LPBYTE;
cbCrlEncoded: DWORD;
pCrlInfo: PCRL_INFO;
hCertStore: HCERTSTORE;
end;
{$EXTERNALSYM _CRL_CONTEXT}
CRL_CONTEXT = _CRL_CONTEXT;
{$EXTERNALSYM CRL_CONTEXT}
TCrlContext = CRL_CONTEXT;
PCrlContext = PCRL_CONTEXT;
PCCRL_CONTEXT = PCRL_CONTEXT;
{$EXTERNALSYM PCCRL_CONTEXT}
PPCCRL_CONTEXT = ^PCCRL_CONTEXT;
{$NODEFINE PPCCRL_CONTEXT}
//+-------------------------------------------------------------------------
// Certificate Trust List (CTL) context.
//
// A CTL context contains both the encoded and decoded representation
// of a CTL. Also contains an opened HCRYPTMSG handle to the decoded
// cryptographic signed message containing the CTL_INFO as its inner content.
// pbCtlContent is the encoded inner content of the signed message.
//
// The CryptMsg APIs can be used to extract additional signer information.
//--------------------------------------------------------------------------
PCTL_CONTEXT = ^CTL_CONTEXT;
{$EXTERNALSYM PCTL_CONTEXT}
_CTL_CONTEXT = record
dwMsgAndCertEncodingType: DWORD;
pbCtlEncoded: LPBYTE;
cbCtlEncoded: DWORD;
pCtlInfo: PCTL_INFO;
hCertStore: HCERTSTORE;
hCryptMsg: HCRYPTMSG;
pbCtlContent: LPBYTE;
cbCtlContent: DWORD;
end;
{$EXTERNALSYM _CTL_CONTEXT}
CTL_CONTEXT = _CTL_CONTEXT;
{$EXTERNALSYM CTL_CONTEXT}
TCtlContext = CTL_CONTEXT;
PCtlContext = PCTL_CONTEXT;
PCCTL_CONTEXT = PCTL_CONTEXT;
{$EXTERNALSYM PCCTL_CONTEXT}
PPCCTL_CONTEXT = ^PCCTL_CONTEXT;
{$EXTERNALSYM PPCCTL_CONTEXT}
//+-------------------------------------------------------------------------
// Certificate, CRL and CTL property IDs
//
// See CertSetCertificateContextProperty or CertGetCertificateContextProperty
// for usage information.
//--------------------------------------------------------------------------
const
CERT_KEY_PROV_HANDLE_PROP_ID = 1;
{$EXTERNALSYM CERT_KEY_PROV_HANDLE_PROP_ID}
CERT_KEY_PROV_INFO_PROP_ID = 2;
{$EXTERNALSYM CERT_KEY_PROV_INFO_PROP_ID}
CERT_SHA1_HASH_PROP_ID = 3;
{$EXTERNALSYM CERT_SHA1_HASH_PROP_ID}
CERT_MD5_HASH_PROP_ID = 4;
{$EXTERNALSYM CERT_MD5_HASH_PROP_ID}
CERT_HASH_PROP_ID = CERT_SHA1_HASH_PROP_ID;
{$EXTERNALSYM CERT_HASH_PROP_ID}
CERT_KEY_CONTEXT_PROP_ID = 5;
{$EXTERNALSYM CERT_KEY_CONTEXT_PROP_ID}
CERT_KEY_SPEC_PROP_ID = 6;
{$EXTERNALSYM CERT_KEY_SPEC_PROP_ID}
CERT_IE30_RESERVED_PROP_ID = 7;
{$EXTERNALSYM CERT_IE30_RESERVED_PROP_ID}
CERT_PUBKEY_HASH_RESERVED_PROP_ID = 8;
{$EXTERNALSYM CERT_PUBKEY_HASH_RESERVED_PROP_ID}
CERT_ENHKEY_USAGE_PROP_ID = 9;
{$EXTERNALSYM CERT_ENHKEY_USAGE_PROP_ID}
CERT_CTL_USAGE_PROP_ID = CERT_ENHKEY_USAGE_PROP_ID;
{$EXTERNALSYM CERT_CTL_USAGE_PROP_ID}
CERT_NEXT_UPDATE_LOCATION_PROP_ID = 10;
{$EXTERNALSYM CERT_NEXT_UPDATE_LOCATION_PROP_ID}
CERT_FRIENDLY_NAME_PROP_ID = 11;
{$EXTERNALSYM CERT_FRIENDLY_NAME_PROP_ID}
CERT_PVK_FILE_PROP_ID = 12;
{$EXTERNALSYM CERT_PVK_FILE_PROP_ID}
CERT_DESCRIPTION_PROP_ID = 13;
{$EXTERNALSYM CERT_DESCRIPTION_PROP_ID}
CERT_ACCESS_STATE_PROP_ID = 14;
{$EXTERNALSYM CERT_ACCESS_STATE_PROP_ID}
CERT_SIGNATURE_HASH_PROP_ID = 15;
{$EXTERNALSYM CERT_SIGNATURE_HASH_PROP_ID}
CERT_SMART_CARD_DATA_PROP_ID = 16;
{$EXTERNALSYM CERT_SMART_CARD_DATA_PROP_ID}
CERT_EFS_PROP_ID = 17;
{$EXTERNALSYM CERT_EFS_PROP_ID}
CERT_FORTEZZA_DATA_PROP_ID = 18;
{$EXTERNALSYM CERT_FORTEZZA_DATA_PROP_ID}
CERT_ARCHIVED_PROP_ID = 19;
{$EXTERNALSYM CERT_ARCHIVED_PROP_ID}
CERT_KEY_IDENTIFIER_PROP_ID = 20;
{$EXTERNALSYM CERT_KEY_IDENTIFIER_PROP_ID}
CERT_AUTO_ENROLL_PROP_ID = 21;
{$EXTERNALSYM CERT_AUTO_ENROLL_PROP_ID}
CERT_PUBKEY_ALG_PARA_PROP_ID = 22;
{$EXTERNALSYM CERT_PUBKEY_ALG_PARA_PROP_ID}
CERT_FIRST_RESERVED_PROP_ID = 23;
{$EXTERNALSYM CERT_FIRST_RESERVED_PROP_ID}
// Note, 32 - 35 are reserved for the CERT, CRL, CTL and KeyId file element IDs.
CERT_LAST_RESERVED_PROP_ID = $00007FFF;
{$EXTERNALSYM CERT_LAST_RESERVED_PROP_ID}
CERT_FIRST_USER_PROP_ID = $00008000;
{$EXTERNALSYM CERT_FIRST_USER_PROP_ID}
CERT_LAST_USER_PROP_ID = $0000FFFF;
{$EXTERNALSYM CERT_LAST_USER_PROP_ID}
function IS_CERT_HASH_PROP_ID(X: DWORD): Boolean;
{$EXTERNALSYM IS_CERT_HASH_PROP_ID}
//+-------------------------------------------------------------------------
// Access State flags returned by CERT_ACCESS_STATE_PROP_ID. Note,
// CERT_ACCESS_PROP_ID is read only.
//--------------------------------------------------------------------------
// Set if context property writes are persisted. For instance, not set for
// memory store contexts. Set for registry based stores opened as read or write.
// Not set for registry based stores opened as read only.
const
CERT_ACCESS_STATE_WRITE_PERSIST_FLAG = $1;
{$EXTERNALSYM CERT_ACCESS_STATE_WRITE_PERSIST_FLAG}
// Set if context resides in a SYSTEM or SYSTEM_REGISTRY store.
CERT_ACCESS_STATE_SYSTEM_STORE_FLAG = $2;
{$EXTERNALSYM CERT_ACCESS_STATE_SYSTEM_STORE_FLAG}
//+-------------------------------------------------------------------------
// Cryptographic Key Provider Information
//
// CRYPT_KEY_PROV_INFO defines the CERT_KEY_PROV_INFO_PROP_ID's pvData.
//
// The CRYPT_KEY_PROV_INFO fields are passed to CryptAcquireContext
// to get a HCRYPTPROV handle. The optional CRYPT_KEY_PROV_PARAM fields are
// passed to CryptSetProvParam to further initialize the provider.
//
// The dwKeySpec field identifies the private key to use from the container
// For example, AT_KEYEXCHANGE or AT_SIGNATURE.
//--------------------------------------------------------------------------
type
PCRYPT_KEY_PROV_PARAM = ^CRYPT_KEY_PROV_PARAM;
{$EXTERNALSYM PCRYPT_KEY_PROV_PARAM}
_CRYPT_KEY_PROV_PARAM = record
dwParam: DWORD;
pbData: LPBYTE;
cbData: DWORD;
dwFlags: DWORD;
end;
{$EXTERNALSYM _CRYPT_KEY_PROV_PARAM}
CRYPT_KEY_PROV_PARAM = _CRYPT_KEY_PROV_PARAM;
{$EXTERNALSYM CRYPT_KEY_PROV_PARAM}
TCryptKeyProvParam = CRYPT_KEY_PROV_PARAM;
PCryptKeyProvParam = PCRYPT_KEY_PROV_PARAM;
PCRYPT_KEY_PROV_INFO = ^CRYPT_KEY_PROV_INFO;
{$EXTERNALSYM PCRYPT_KEY_PROV_INFO}
_CRYPT_KEY_PROV_INFO = record
pwszContainerName: LPWSTR;
pwszProvName: LPWSTR;
dwProvType: DWORD;
dwFlags: DWORD;
cProvParam: DWORD;
rgProvParam: PCRYPT_KEY_PROV_PARAM;
dwKeySpec: DWORD;
end;
{$EXTERNALSYM _CRYPT_KEY_PROV_INFO}
CRYPT_KEY_PROV_INFO = _CRYPT_KEY_PROV_INFO;
{$EXTERNALSYM CRYPT_KEY_PROV_INFO}
TCryptKeyProvInfo = CRYPT_KEY_PROV_INFO;
PCryptKeyProvInfo = PCRYPT_KEY_PROV_INFO;
//+-------------------------------------------------------------------------
// The following flag should be set in the above dwFlags to enable
// a CertSetCertificateContextProperty(CERT_KEY_CONTEXT_PROP_ID) after a
// CryptAcquireContext is done in the Sign or Decrypt Message functions.
//
// The following define must not collide with any of the
// CryptAcquireContext dwFlag defines.
//--------------------------------------------------------------------------
const
CERT_SET_KEY_PROV_HANDLE_PROP_ID = $00000001;
{$EXTERNALSYM CERT_SET_KEY_PROV_HANDLE_PROP_ID}
CERT_SET_KEY_CONTEXT_PROP_ID = $00000001;
{$EXTERNALSYM CERT_SET_KEY_CONTEXT_PROP_ID}
//+-------------------------------------------------------------------------
// Certificate Key Context
//
// CERT_KEY_CONTEXT defines the CERT_KEY_CONTEXT_PROP_ID's pvData.
//--------------------------------------------------------------------------
type
PCERT_KEY_CONTEXT = ^CERT_KEY_CONTEXT;
{$EXTERNALSYM PCERT_KEY_CONTEXT}
_CERT_KEY_CONTEXT = record
cbSize: DWORD; // sizeof(CERT_KEY_CONTEXT)
hCryptProv: HCRYPTPROV;
dwKeySpec: DWORD;
end;
{$EXTERNALSYM _CERT_KEY_CONTEXT}
CERT_KEY_CONTEXT = _CERT_KEY_CONTEXT;
{$EXTERNALSYM CERT_KEY_CONTEXT}
TCertKeyContext = CERT_KEY_CONTEXT;
PCertKeyContext = PCERT_KEY_CONTEXT;
//+-------------------------------------------------------------------------
// Certificate Store Provider Types
//--------------------------------------------------------------------------
const
CERT_STORE_PROV_MSG = LPCSTR(1);
{$EXTERNALSYM CERT_STORE_PROV_MSG}
CERT_STORE_PROV_MEMORY = LPCSTR(2);
{$EXTERNALSYM CERT_STORE_PROV_MEMORY}
CERT_STORE_PROV_FILE = LPCSTR(3);
{$EXTERNALSYM CERT_STORE_PROV_FILE}
CERT_STORE_PROV_REG = LPCSTR(4);
{$EXTERNALSYM CERT_STORE_PROV_REG}
CERT_STORE_PROV_PKCS7 = LPCSTR(5);
{$EXTERNALSYM CERT_STORE_PROV_PKCS7}
CERT_STORE_PROV_SERIALIZED = LPCSTR(6);
{$EXTERNALSYM CERT_STORE_PROV_SERIALIZED}
CERT_STORE_PROV_FILENAME_A = LPCSTR(7);
{$EXTERNALSYM CERT_STORE_PROV_FILENAME_A}
CERT_STORE_PROV_FILENAME_W = LPCSTR(8);
{$EXTERNALSYM CERT_STORE_PROV_FILENAME_W}
CERT_STORE_PROV_FILENAME = CERT_STORE_PROV_FILENAME_W;
{$EXTERNALSYM CERT_STORE_PROV_FILENAME}
CERT_STORE_PROV_SYSTEM_A = LPCSTR(9);
{$EXTERNALSYM CERT_STORE_PROV_SYSTEM_A}
CERT_STORE_PROV_SYSTEM_W = LPCSTR(10);
{$EXTERNALSYM CERT_STORE_PROV_SYSTEM_W}
CERT_STORE_PROV_SYSTEM = CERT_STORE_PROV_SYSTEM_W;
{$EXTERNALSYM CERT_STORE_PROV_SYSTEM}
CERT_STORE_PROV_COLLECTION = LPCSTR(11);
{$EXTERNALSYM CERT_STORE_PROV_COLLECTION}
CERT_STORE_PROV_SYSTEM_REGISTRY_A = LPCSTR(12);
{$EXTERNALSYM CERT_STORE_PROV_SYSTEM_REGISTRY_A}
CERT_STORE_PROV_SYSTEM_REGISTRY_W = LPCSTR(13);
{$EXTERNALSYM CERT_STORE_PROV_SYSTEM_REGISTRY_W}
CERT_STORE_PROV_SYSTEM_REGISTRY = CERT_STORE_PROV_SYSTEM_REGISTRY_W;
{$EXTERNALSYM CERT_STORE_PROV_SYSTEM_REGISTRY}
CERT_STORE_PROV_PHYSICAL_W = LPCSTR(14);
{$EXTERNALSYM CERT_STORE_PROV_PHYSICAL_W}
CERT_STORE_PROV_PHYSICAL = CERT_STORE_PROV_PHYSICAL_W;
{$EXTERNALSYM CERT_STORE_PROV_PHYSICAL}
CERT_STORE_PROV_SMART_CARD_W = LPCSTR(15);
{$EXTERNALSYM CERT_STORE_PROV_SMART_CARD_W}
CERT_STORE_PROV_SMART_CARD = CERT_STORE_PROV_SMART_CARD_W;
{$EXTERNALSYM CERT_STORE_PROV_SMART_CARD}
CERT_STORE_PROV_LDAP_W = LPCSTR(16);
{$EXTERNALSYM CERT_STORE_PROV_LDAP_W}
CERT_STORE_PROV_LDAP = CERT_STORE_PROV_LDAP_W;
{$EXTERNALSYM CERT_STORE_PROV_LDAP}
sz_CERT_STORE_PROV_MEMORY = 'Memory';
{$EXTERNALSYM sz_CERT_STORE_PROV_MEMORY}
sz_CERT_STORE_PROV_FILENAME_W = 'File';
{$EXTERNALSYM sz_CERT_STORE_PROV_FILENAME_W}
sz_CERT_STORE_PROV_FILENAME = sz_CERT_STORE_PROV_FILENAME_W;
{$EXTERNALSYM sz_CERT_STORE_PROV_FILENAME}
sz_CERT_STORE_PROV_SYSTEM_W = 'System';
{$EXTERNALSYM sz_CERT_STORE_PROV_SYSTEM_W}
sz_CERT_STORE_PROV_SYSTEM = sz_CERT_STORE_PROV_SYSTEM_W;
{$EXTERNALSYM sz_CERT_STORE_PROV_SYSTEM}
sz_CERT_STORE_PROV_PKCS7 = 'PKCS7';
{$EXTERNALSYM sz_CERT_STORE_PROV_PKCS7}
sz_CERT_STORE_PROV_SERIALIZED = 'Serialized';
{$EXTERNALSYM sz_CERT_STORE_PROV_SERIALIZED}
sz_CERT_STORE_PROV_COLLECTION = 'Collection';
{$EXTERNALSYM sz_CERT_STORE_PROV_COLLECTION}
sz_CERT_STORE_PROV_SYSTEM_REGISTRY_W = 'SystemRegistry';
{$EXTERNALSYM sz_CERT_STORE_PROV_SYSTEM_REGISTRY_W}
sz_CERT_STORE_PROV_SYSTEM_REGISTRY = sz_CERT_STORE_PROV_SYSTEM_REGISTRY_W;
{$EXTERNALSYM sz_CERT_STORE_PROV_SYSTEM_REGISTRY}
sz_CERT_STORE_PROV_PHYSICAL_W = 'Physical';
{$EXTERNALSYM sz_CERT_STORE_PROV_PHYSICAL_W}
sz_CERT_STORE_PROV_PHYSICAL = sz_CERT_STORE_PROV_PHYSICAL_W;
{$EXTERNALSYM sz_CERT_STORE_PROV_PHYSICAL}
sz_CERT_STORE_PROV_SMART_CARD_W = 'SmartCard';
{$EXTERNALSYM sz_CERT_STORE_PROV_SMART_CARD_W}
sz_CERT_STORE_PROV_SMART_CARD = sz_CERT_STORE_PROV_SMART_CARD_W;
{$EXTERNALSYM sz_CERT_STORE_PROV_SMART_CARD}
sz_CERT_STORE_PROV_LDAP_W = 'Ldap';
{$EXTERNALSYM sz_CERT_STORE_PROV_LDAP_W}
sz_CERT_STORE_PROV_LDAP = sz_CERT_STORE_PROV_LDAP_W;
{$EXTERNALSYM sz_CERT_STORE_PROV_LDAP}
//+-------------------------------------------------------------------------
// Certificate Store verify/results flags
//--------------------------------------------------------------------------
CERT_STORE_SIGNATURE_FLAG = $00000001;
{$EXTERNALSYM CERT_STORE_SIGNATURE_FLAG}
CERT_STORE_TIME_VALIDITY_FLAG = $00000002;
{$EXTERNALSYM CERT_STORE_TIME_VALIDITY_FLAG}
CERT_STORE_REVOCATION_FLAG = $00000004;
{$EXTERNALSYM CERT_STORE_REVOCATION_FLAG}
CERT_STORE_NO_CRL_FLAG = $00010000;
{$EXTERNALSYM CERT_STORE_NO_CRL_FLAG}
CERT_STORE_NO_ISSUER_FLAG = $00020000;
{$EXTERNALSYM CERT_STORE_NO_ISSUER_FLAG}
//+-------------------------------------------------------------------------
// Certificate Store open/property flags
//--------------------------------------------------------------------------
CERT_STORE_NO_CRYPT_RELEASE_FLAG = $00000001;
{$EXTERNALSYM CERT_STORE_NO_CRYPT_RELEASE_FLAG}
CERT_STORE_SET_LOCALIZED_NAME_FLAG = $00000002;
{$EXTERNALSYM CERT_STORE_SET_LOCALIZED_NAME_FLAG}
CERT_STORE_DEFER_CLOSE_UNTIL_LAST_FREE_FLAG = $00000004;
{$EXTERNALSYM CERT_STORE_DEFER_CLOSE_UNTIL_LAST_FREE_FLAG}
CERT_STORE_DELETE_FLAG = $00000010;
{$EXTERNALSYM CERT_STORE_DELETE_FLAG}
CERT_STORE_MANIFOLD_FLAG = $00000100;
{$EXTERNALSYM CERT_STORE_MANIFOLD_FLAG}
CERT_STORE_ENUM_ARCHIVED_FLAG = $00000200;
{$EXTERNALSYM CERT_STORE_ENUM_ARCHIVED_FLAG}
CERT_STORE_UPDATE_KEYID_FLAG = $00000400;
{$EXTERNALSYM CERT_STORE_UPDATE_KEYID_FLAG}
CERT_STORE_READONLY_FLAG = $00008000;
{$EXTERNALSYM CERT_STORE_READONLY_FLAG}
CERT_STORE_OPEN_EXISTING_FLAG = $00004000;
{$EXTERNALSYM CERT_STORE_OPEN_EXISTING_FLAG}
CERT_STORE_CREATE_NEW_FLAG = $00002000;
{$EXTERNALSYM CERT_STORE_CREATE_NEW_FLAG}
CERT_STORE_MAXIMUM_ALLOWED_FLAG = $00001000;
{$EXTERNALSYM CERT_STORE_MAXIMUM_ALLOWED_FLAG}
//+-------------------------------------------------------------------------
// Certificate Store Provider flags are in the HiWord (0xFFFF0000)
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// Certificate System Store Flag Values
//--------------------------------------------------------------------------
// Includes flags and location
CERT_SYSTEM_STORE_MASK = DWORD($FFFF0000);
{$EXTERNALSYM CERT_SYSTEM_STORE_MASK}
// Set if pvPara points to a CERT_SYSTEM_STORE_RELOCATE_PARA structure
CERT_SYSTEM_STORE_RELOCATE_FLAG = DWORD($80000000);
{$EXTERNALSYM CERT_SYSTEM_STORE_RELOCATE_FLAG}
type
PCERT_SYSTEM_STORE_RELOCATE_PARA = ^CERT_SYSTEM_STORE_RELOCATE_PARA;
{$EXTERNALSYM PCERT_SYSTEM_STORE_RELOCATE_PARA}
_CERT_SYSTEM_STORE_RELOCATE_PARA = record
Union1: record
case Integer of
0: (hKeyBase: HKEY);
1: (pvBase: Pointer);
end;
case Integer of
0: (pvSystemStore: Pointer);
1: (pszSystemStore: LPCSTR);
2: (pwszSystemStore: LPCWSTR);
end;
{$EXTERNALSYM _CERT_SYSTEM_STORE_RELOCATE_PARA}
CERT_SYSTEM_STORE_RELOCATE_PARA = _CERT_SYSTEM_STORE_RELOCATE_PARA;
{$EXTERNALSYM CERT_SYSTEM_STORE_RELOCATE_PARA}
TCertSystemStoreRelocatePara = CERT_SYSTEM_STORE_RELOCATE_PARA;
PCertSystemStoreRelocatePara = PCERT_SYSTEM_STORE_RELOCATE_PARA;
// By default, when the CurrentUser "Root" store is opened, any SystemRegistry
// roots not also on the protected root list are deleted from the cache before
// CertOpenStore() returns. Set the following flag to return all the roots
// in the SystemRegistry without checking the protected root list.
const
CERT_SYSTEM_STORE_UNPROTECTED_FLAG = $40000000;
{$EXTERNALSYM CERT_SYSTEM_STORE_UNPROTECTED_FLAG}
// Location of the system store:
CERT_SYSTEM_STORE_LOCATION_MASK = $00FF0000;
{$EXTERNALSYM CERT_SYSTEM_STORE_LOCATION_MASK}
CERT_SYSTEM_STORE_LOCATION_SHIFT = 16;
{$EXTERNALSYM CERT_SYSTEM_STORE_LOCATION_SHIFT}
// Registry: HKEY_CURRENT_USER or HKEY_LOCAL_MACHINE
CERT_SYSTEM_STORE_CURRENT_USER_ID = 1;
{$EXTERNALSYM CERT_SYSTEM_STORE_CURRENT_USER_ID}
CERT_SYSTEM_STORE_LOCAL_MACHINE_ID = 2;
{$EXTERNALSYM CERT_SYSTEM_STORE_LOCAL_MACHINE_ID}
// Registry: HKEY_LOCAL_MACHINE\Software\Microsoft\Cryptography\Services
CERT_SYSTEM_STORE_CURRENT_SERVICE_ID = 4;
{$EXTERNALSYM CERT_SYSTEM_STORE_CURRENT_SERVICE_ID}
CERT_SYSTEM_STORE_SERVICES_ID = 5;
{$EXTERNALSYM CERT_SYSTEM_STORE_SERVICES_ID}
// Registry: HKEY_USERS
CERT_SYSTEM_STORE_USERS_ID = 6;
{$EXTERNALSYM CERT_SYSTEM_STORE_USERS_ID}
// Registry: HKEY_CURRENT_USER\Software\Policies\Microsoft\SystemCertificates
CERT_SYSTEM_STORE_CURRENT_USER_GROUP_POLICY_ID = 7;
{$EXTERNALSYM CERT_SYSTEM_STORE_CURRENT_USER_GROUP_POLICY_ID}
// Registry: HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\SystemCertificates
CERT_SYSTEM_STORE_LOCAL_MACHINE_GROUP_POLICY_ID = 8;
{$EXTERNALSYM CERT_SYSTEM_STORE_LOCAL_MACHINE_GROUP_POLICY_ID}
// Registry: HKEY_LOCAL_MACHINE\Software\Microsoft\EnterpriseCertificates
CERT_SYSTEM_STORE_LOCAL_MACHINE_ENTERPRISE_ID = 9;
{$EXTERNALSYM CERT_SYSTEM_STORE_LOCAL_MACHINE_ENTERPRISE_ID}
CERT_SYSTEM_STORE_CURRENT_USER = CERT_SYSTEM_STORE_CURRENT_USER_ID shl CERT_SYSTEM_STORE_LOCATION_SHIFT;
{$EXTERNALSYM CERT_SYSTEM_STORE_CURRENT_USER}
CERT_SYSTEM_STORE_LOCAL_MACHINE = CERT_SYSTEM_STORE_LOCAL_MACHINE_ID shl CERT_SYSTEM_STORE_LOCATION_SHIFT;
{$EXTERNALSYM CERT_SYSTEM_STORE_LOCAL_MACHINE}
CERT_SYSTEM_STORE_CURRENT_SERVICE = CERT_SYSTEM_STORE_CURRENT_SERVICE_ID shl CERT_SYSTEM_STORE_LOCATION_SHIFT;
{$EXTERNALSYM CERT_SYSTEM_STORE_CURRENT_SERVICE}
CERT_SYSTEM_STORE_SERVICES = CERT_SYSTEM_STORE_SERVICES_ID shl CERT_SYSTEM_STORE_LOCATION_SHIFT;
{$EXTERNALSYM CERT_SYSTEM_STORE_SERVICES}
CERT_SYSTEM_STORE_USERS = CERT_SYSTEM_STORE_USERS_ID shl CERT_SYSTEM_STORE_LOCATION_SHIFT;
{$EXTERNALSYM CERT_SYSTEM_STORE_USERS}
CERT_SYSTEM_STORE_CURRENT_USER_GROUP_POLICY = CERT_SYSTEM_STORE_CURRENT_USER_GROUP_POLICY_ID shl CERT_SYSTEM_STORE_LOCATION_SHIFT;
{$EXTERNALSYM CERT_SYSTEM_STORE_CURRENT_USER_GROUP_POLICY}
CERT_SYSTEM_STORE_LOCAL_MACHINE_GROUP_POLICY = CERT_SYSTEM_STORE_LOCAL_MACHINE_GROUP_POLICY_ID shl CERT_SYSTEM_STORE_LOCATION_SHIFT;
{$EXTERNALSYM CERT_SYSTEM_STORE_LOCAL_MACHINE_GROUP_POLICY}
CERT_SYSTEM_STORE_LOCAL_MACHINE_ENTERPRISE = CERT_SYSTEM_STORE_LOCAL_MACHINE_ENTERPRISE_ID shl CERT_SYSTEM_STORE_LOCATION_SHIFT;
{$EXTERNALSYM CERT_SYSTEM_STORE_LOCAL_MACHINE_ENTERPRISE}
//+-------------------------------------------------------------------------
// Group Policy Store Defines
//--------------------------------------------------------------------------
// Registry path to the Group Policy system stores
CERT_GROUP_POLICY_SYSTEM_STORE_REGPATH = 'Software\Policies\Microsoft\SystemCertificates';
{$EXTERNALSYM CERT_GROUP_POLICY_SYSTEM_STORE_REGPATH}
//+-------------------------------------------------------------------------
// EFS Defines
//--------------------------------------------------------------------------
// Registry path to the EFS EFSBlob SubKey - Value type is REG_BINARY
CERT_EFSBLOB_REGPATH = CERT_GROUP_POLICY_SYSTEM_STORE_REGPATH + '\EFS';
{$EXTERNALSYM CERT_EFSBLOB_REGPATH}
CERT_EFSBLOB_VALUE_NAME = 'EFSBlob';
{$EXTERNALSYM CERT_EFSBLOB_VALUE_NAME}
//+-------------------------------------------------------------------------
// Protected Root Defines
//--------------------------------------------------------------------------
// Registry path to the Protected Roots Flags SubKey
CERT_PROT_ROOT_FLAGS_REGPATH = CERT_GROUP_POLICY_SYSTEM_STORE_REGPATH + '\Root\ProtectedRoots';
{$EXTERNALSYM CERT_PROT_ROOT_FLAGS_REGPATH}
CERT_PROT_ROOT_FLAGS_VALUE_NAME = 'Flags';
{$EXTERNALSYM CERT_PROT_ROOT_FLAGS_VALUE_NAME}
// Set the following flag to inhibit the opening of the CurrentUser's
// .Default physical store when opening the CurrentUser's "Root" system store.
// The .Default physical store open's the CurrentUser SystemRegistry "Root"
// store.
CERT_PROT_ROOT_DISABLE_CURRENT_USER_FLAG = $1;
{$EXTERNALSYM CERT_PROT_ROOT_DISABLE_CURRENT_USER_FLAG}
// Set the following flag to inhibit the adding of roots from the
// CurrentUser SystemRegistry "Root" store to the protected root list
// when the "Root" store is initially protected.
CERT_PROT_ROOT_INHIBIT_ADD_AT_INIT_FLAG = $2;
{$EXTERNALSYM CERT_PROT_ROOT_INHIBIT_ADD_AT_INIT_FLAG}
// Set the following flag to inhibit the purging of protected roots from the
// CurrentUser SystemRegistry "Root" store that are
// also in the LocalMachine SystemRegistry "Root" store. Note, when not
// disabled, the purging is done silently without UI.
CERT_PROT_ROOT_INHIBIT_PURGE_LM_FLAG = $4;
{$EXTERNALSYM CERT_PROT_ROOT_INHIBIT_PURGE_LM_FLAG}
// Set the following flag to only open the .LocalMachineGroupPolicy
// physical store when opening the CurrentUser's "Root" system store.
CERT_PROT_ROOT_ONLY_LM_GPT_FLAG = $8;
{$EXTERNALSYM CERT_PROT_ROOT_ONLY_LM_GPT_FLAG}
//+-------------------------------------------------------------------------
// Certificate Registry Store Flag Values (CERT_STORE_REG)
//--------------------------------------------------------------------------
// Set this flag if the HKEY passed in pvPara points to a remote computer
// registry key.
CERT_REGISTRY_STORE_REMOTE_FLAG = $10000;
{$EXTERNALSYM CERT_REGISTRY_STORE_REMOTE_FLAG}
// Set this flag if the contexts are to be persisted as a single serialized
// store in the registry. Mainly used for stores downloaded from the GPT.
// Such as the CurrentUserGroupPolicy or LocalMachineGroupPolicy stores.
CERT_REGISTRY_STORE_SERIALIZED_FLAG = $20000;
{$EXTERNALSYM CERT_REGISTRY_STORE_SERIALIZED_FLAG}
// The following flags are for internal use. When set, the
// pvPara parameter passed to CertOpenStore is a pointer to the following
// data structure and not the HKEY. The above CERT_REGISTRY_STORE_REMOTE_FLAG
// is also set if hKeyBase was obtained via RegConnectRegistry().
CERT_REGISTRY_STORE_CLIENT_GPT_FLAG = DWORD($80000000);
{$EXTERNALSYM CERT_REGISTRY_STORE_CLIENT_GPT_FLAG}
CERT_REGISTRY_STORE_LM_GPT_FLAG = $01000000;
{$EXTERNALSYM CERT_REGISTRY_STORE_LM_GPT_FLAG}
type
PCERT_REGISTRY_STORE_CLIENT_GPT_PARA = ^CERT_REGISTRY_STORE_CLIENT_GPT_PARA;
{$EXTERNALSYM PCERT_REGISTRY_STORE_CLIENT_GPT_PARA}
_CERT_REGISTRY_STORE_CLIENT_GPT_PARA = record
hKeyBase: HKEY;
pwszRegPath: LPWSTR;
end;
{$EXTERNALSYM _CERT_REGISTRY_STORE_CLIENT_GPT_PARA}
CERT_REGISTRY_STORE_CLIENT_GPT_PARA = _CERT_REGISTRY_STORE_CLIENT_GPT_PARA;
{$EXTERNALSYM CERT_REGISTRY_STORE_CLIENT_GPT_PARA}
TCertRegistryStoreClientGptPara = CERT_REGISTRY_STORE_CLIENT_GPT_PARA;
PCertRegistryStoreClientGptPara = PCERT_REGISTRY_STORE_CLIENT_GPT_PARA;
// The following flag is for internal use. When set, the contexts are
// persisted into roaming files instead of the registry. Such as, the
// CurrentUser "My" store. When this flag is set, the following data structure
// is passed to CertOpenStore instead of HKEY.
const
CERT_REGISTRY_STORE_ROAMING_FLAG = $40000;
{$EXTERNALSYM CERT_REGISTRY_STORE_ROAMING_FLAG}
// hKey may be NULL or non-NULL. When non-NULL, existing contexts are
// moved from the registry to roaming files.
type
PCERT_REGISTRY_STORE_ROAMING_PARA = ^CERT_REGISTRY_STORE_ROAMING_PARA;
{$EXTERNALSYM PCERT_REGISTRY_STORE_ROAMING_PARA}
_CERT_REGISTRY_STORE_ROAMING_PARA = record
hKey: HKEY;
pwszStoreDirectory: LPWSTR;
end;
{$EXTERNALSYM _CERT_REGISTRY_STORE_ROAMING_PARA}
CERT_REGISTRY_STORE_ROAMING_PARA = _CERT_REGISTRY_STORE_ROAMING_PARA;
{$EXTERNALSYM CERT_REGISTRY_STORE_ROAMING_PARA}
TCertRegistryStoreRoamingPara = CERT_REGISTRY_STORE_ROAMING_PARA;
PCertRegistryStoreRoamingPara = PCERT_REGISTRY_STORE_ROAMING_PARA;
// The following flag is for internal use. When set, the "My" DWORD value
// at HKLM\Software\Microsoft\Cryptography\IEDirtyFlags is set to 0x1
// whenever a certificate is added to the registry store.
const
CERT_REGISTRY_STORE_MY_IE_DIRTY_FLAG = $80000;
{$EXTERNALSYM CERT_REGISTRY_STORE_MY_IE_DIRTY_FLAG}
// Registry path to the subkey containing the "My" DWORD value to be set
CERT_IE_DIRTY_FLAGS_REGPATH = 'Software\Microsoft\Cryptography\IEDirtyFlags';
{$EXTERNALSYM CERT_IE_DIRTY_FLAGS_REGPATH}
//+-------------------------------------------------------------------------
// Certificate File Store Flag Values for the providers:
// CERT_STORE_PROV_FILE
// CERT_STORE_PROV_FILENAME
// CERT_STORE_PROV_FILENAME_A
// CERT_STORE_PROV_FILENAME_W
// sz_CERT_STORE_PROV_FILENAME_W
//--------------------------------------------------------------------------
// Set this flag if any store changes are to be committed to the file.
// The changes are committed at CertCloseStore or by calling
// CertControlStore(CERT_STORE_CTRL_COMMIT).
//
// The open fails with E_INVALIDARG if both CERT_FILE_STORE_COMMIT_ENABLE_FLAG
// and CERT_STORE_READONLY_FLAG are set in dwFlags.
//
// For the FILENAME providers: if the file contains an X509 encoded
// certificate, the open fails with ERROR_ACCESS_DENIED.
//
// For the FILENAME providers: if CERT_STORE_CREATE_NEW_FLAG is set, the
// CreateFile uses CREATE_NEW. If CERT_STORE_OPEN_EXISTING is set, uses
// OPEN_EXISTING. Otherwise, defaults to OPEN_ALWAYS.
//
// For the FILENAME providers: the file is committed as either a PKCS7 or
// serialized store depending on the type read at open. However, if the
// file is empty then, if the filename has either a ".p7c" or ".spc"
// extension its committed as a PKCS7. Otherwise, its committed as a
// serialized store.
//
// For CERT_STORE_PROV_FILE, the file handle is duplicated. Its always
// committed as a serialized store.
//
CERT_FILE_STORE_COMMIT_ENABLE_FLAG = $10000;
{$EXTERNALSYM CERT_FILE_STORE_COMMIT_ENABLE_FLAG}
//+-------------------------------------------------------------------------
// Open the cert store using the specified store provider.
//
// If CERT_STORE_DELETE_FLAG is set, then, the store is deleted. NULL is
// returned for both success and failure. However, GetLastError() returns 0
// for success and nonzero for failure.
//
// If CERT_STORE_SET_LOCALIZED_NAME_FLAG is set, then, if supported, the
// provider sets the store's CERT_STORE_LOCALIZED_NAME_PROP_ID property.
// The store's localized name can be retrieved by calling
// CertSetStoreProperty(dwPropID = CERT_STORE_LOCALIZED_NAME_PROP_ID).
// This flag is supported by the following providers (and their sz_
// equivalent):
// CERT_STORE_PROV_FILENAME_A
// CERT_STORE_PROV_FILENAME_W
// CERT_STORE_PROV_SYSTEM_A
// CERT_STORE_PROV_SYSTEM_W
// CERT_STORE_PROV_SYSTEM_REGISTRY_A
// CERT_STORE_PROV_SYSTEM_REGISTRY_W
// CERT_STORE_PROV_PHYSICAL_W
//
// If CERT_STORE_DEFER_CLOSE_UNTIL_LAST_FREE_FLAG is set, then, the
// closing of the store's provider is deferred until all certificate,
// CRL and CTL contexts obtained from the store are freed. Also,
// if a non NULL HCRYPTPROV was passed, then, it will continue to be used.
// By default, the store's provider is closed on the final CertCloseStore.
// If this flag isn't set, then, any property changes made to previously
// duplicated contexts after the final CertCloseStore will not be persisted.
// By setting this flag, property changes made
// after the CertCloseStore will be persisted. Note, setting this flag
// causes extra overhead in doing context duplicates and frees.
// If CertCloseStore is called with CERT_CLOSE_STORE_FORCE_FLAG, then,
// the CERT_STORE_DEFER_CLOSE_UNTIL_LAST_FREE_FLAG flag is ignored.
//
// CERT_STORE_MANIFOLD_FLAG can be set to check for certificates having the
// manifold extension and archive the "older" certificates with the same
// manifold extension value. A certificate is archived by setting the
// CERT_ARCHIVED_PROP_ID.
//
// By default, contexts having the CERT_ARCHIVED_PROP_ID, are skipped
// during enumeration. CERT_STORE_ENUM_ARCHIVED_FLAG can be set to include
// archived contexts when enumerating. Note, contexts having the
// CERT_ARCHIVED_PROP_ID are still found for explicit finds, such as,
// finding a context with a specific hash or finding a certificate having
// a specific issuer and serial number.
//
// CERT_STORE_UPDATE_KEYID_FLAG can be set to also update the Key Identifier's
// CERT_KEY_PROV_INFO_PROP_ID property whenever a certificate's
// CERT_KEY_IDENTIFIER_PROP_ID or CERT_KEY_PROV_INFO_PROP_ID property is set
// and the other property already exists. If the Key Identifier's
// CERT_KEY_PROV_INFO_PROP_ID already exists, it isn't updated. Any
// errors encountered are silently ignored.
//
// By default, this flag is implicitly set for the "My\.Default" CurrentUser
// and LocalMachine physical stores.
//
// CERT_STORE_READONLY_FLAG can be set to open the store as read only.
// Otherwise, the store is opened as read/write.
//
// CERT_STORE_OPEN_EXISTING_FLAG can be set to only open an existing
// store. CERT_STORE_CREATE_NEW_FLAG can be set to create a new store and
// fail if the store already exists. Otherwise, the default is to open
// an existing store or create a new store if it doesn't already exist.
//
// hCryptProv specifies the crypto provider to use to create the hash
// properties or verify the signature of a subject certificate or CRL.
// The store doesn't need to use a private
// key. If the CERT_STORE_NO_CRYPT_RELEASE_FLAG isn't set, hCryptProv is
// CryptReleaseContext'ed on the final CertCloseStore.
//
// Note, if the open fails, hCryptProv is released if it would have been
// released when the store was closed.
//
// If hCryptProv is zero, then, the default provider and container for the
// PROV_RSA_FULL provider type is CryptAcquireContext'ed with
// CRYPT_VERIFYCONTEXT access. The CryptAcquireContext is deferred until
// the first create hash or verify signature. In addition, once acquired,
// the default provider isn't released until process exit when crypt32.dll
// is unloaded. The acquired default provider is shared across all stores
// and threads.
//
// After initializing the store's data structures and optionally acquiring a
// default crypt provider, CertOpenStore calls CryptGetOIDFunctionAddress to
// get the address of the CRYPT_OID_OPEN_STORE_PROV_FUNC specified by
// lpszStoreProvider. Since a store can contain certificates with different
// encoding types, CryptGetOIDFunctionAddress is called with dwEncodingType
// set to 0 and not the dwEncodingType passed to CertOpenStore.
// PFN_CERT_DLL_OPEN_STORE_FUNC specifies the signature of the provider's
// open function. This provider open function is called to load the
// store's certificates and CRLs. Optionally, the provider may return an
// array of functions called before a certificate or CRL is added or deleted
// or has a property that is set.
//
// Use of the dwEncodingType parameter is provider dependent. The type
// definition for pvPara also depends on the provider.
//
// Store providers are installed or registered via
// CryptInstallOIDFunctionAddress or CryptRegisterOIDFunction, where,
// dwEncodingType is 0 and pszFuncName is CRYPT_OID_OPEN_STORE_PROV_FUNC.
//
// Here's a list of the predefined provider types (implemented in crypt32.dll):
//
// CERT_STORE_PROV_MSG:
// Gets the certificates and CRLs from the specified cryptographic message.
// dwEncodingType contains the message and certificate encoding types.
// The message's handle is passed in pvPara. Given,
// HCRYPTMSG hCryptMsg; pvPara = (const void *) hCryptMsg;
//
// CERT_STORE_PROV_MEMORY
// sz_CERT_STORE_PROV_MEMORY:
// Opens a store without any initial certificates or CRLs. pvPara
// isn't used.
//
// CERT_STORE_PROV_FILE:
// Reads the certificates and CRLs from the specified file. The file's
// handle is passed in pvPara. Given,
// HANDLE hFile; pvPara = (const void *) hFile;
//
// For a successful open, the file pointer is advanced past
// the certificates and CRLs and their properties read from the file.
// Note, only expects a serialized store and not a file containing
// either a PKCS #7 signed message or a single encoded certificate.
//
// The hFile isn't closed.
//
// CERT_STORE_PROV_REG:
// Reads the certificates and CRLs from the registry. The registry's
// key handle is passed in pvPara. Given,
// HKEY hKey; pvPara = (const void *) hKey;
//
// The input hKey isn't closed by the provider. Before returning, the
// provider opens it own copy of the hKey.
//
// If CERT_STORE_READONLY_FLAG is set, then, the registry subkeys are
// RegOpenKey'ed with KEY_READ_ACCESS. Otherwise, the registry subkeys
// are RegCreateKey'ed with KEY_ALL_ACCESS.
//
// This provider returns the array of functions for reading, writing,
// deleting and property setting certificates and CRLs.
// Any changes to the opened store are immediately pushed through to
// the registry. However, if CERT_STORE_READONLY_FLAG is set, then,
// writing, deleting or property setting results in a
// SetLastError(E_ACCESSDENIED).
//
// Note, all the certificates and CRLs are read from the registry
// when the store is opened. The opened store serves as a write through
// cache.
//
// If CERT_REGISTRY_STORE_SERIALIZED_FLAG is set, then, the
// contexts are persisted as a single serialized store subkey in the
// registry.
//
// CERT_STORE_PROV_PKCS7:
// sz_CERT_STORE_PROV_PKCS7:
// Gets the certificates and CRLs from the encoded PKCS #7 signed message.
// dwEncodingType specifies the message and certificate encoding types.
// The pointer to the encoded message's blob is passed in pvPara. Given,
// CRYPT_DATA_BLOB EncodedMsg; pvPara = (const void *) &EncodedMsg;
//
// Note, also supports the IE3.0 special version of a
// PKCS #7 signed message referred to as a "SPC" formatted message.
//
// CERT_STORE_PROV_SERIALIZED:
// sz_CERT_STORE_PROV_SERIALIZED:
// Gets the certificates and CRLs from memory containing a serialized
// store. The pointer to the serialized memory blob is passed in pvPara.
// Given,
// CRYPT_DATA_BLOB Serialized; pvPara = (const void *) &Serialized;
//
// CERT_STORE_PROV_FILENAME_A:
// CERT_STORE_PROV_FILENAME_W:
// CERT_STORE_PROV_FILENAME:
// sz_CERT_STORE_PROV_FILENAME_W:
// sz_CERT_STORE_PROV_FILENAME:
// Opens the file and first attempts to read as a serialized store. Then,
// as a PKCS #7 signed message. Finally, as a single encoded certificate.
// The filename is passed in pvPara. The filename is UNICODE for the
// "_W" provider and ASCII for the "_A" provider. For "_W": given,
// LPCWSTR pwszFilename; pvPara = (const void *) pwszFilename;
// For "_A": given,
// LPCSTR pszFilename; pvPara = (const void *) pszFilename;
//
// Note, the default (without "_A" or "_W") is unicode.
//
// Note, also supports the reading of the IE3.0 special version of a
// PKCS #7 signed message file referred to as a "SPC" formatted file.
//
// CERT_STORE_PROV_SYSTEM_A:
// CERT_STORE_PROV_SYSTEM_W:
// CERT_STORE_PROV_SYSTEM:
// sz_CERT_STORE_PROV_SYSTEM_W:
// sz_CERT_STORE_PROV_SYSTEM:
// Opens the specified logical "System" store. The upper word of the
// dwFlags parameter is used to specify the location of the system store.
//
// A "System" store is a collection consisting of one or more "Physical"
// stores. A "Physical" store is registered via the
// CertRegisterPhysicalStore API. Each of the registered physical stores
// is CertStoreOpen'ed and added to the collection via
// CertAddStoreToCollection.
//
// The CERT_SYSTEM_STORE_CURRENT_USER, CERT_SYSTEM_STORE_LOCAL_MACHINE,
// CERT_SYSTEM_STORE_CURRENT_SERVICE, CERT_SYSTEM_STORE_SERVICES,
// CERT_SYSTEM_STORE_USERS, CERT_SYSTEM_STORE_CURRENT_USER_GROUP_POLICY,
// CERT_SYSTEM_STORE_LOCAL_MACHINE_GROUP_POLICY and
// CERT_SYSTEM_STORE_LOCAL_MACHINE_ENTERPRSE
// system stores by default have a "SystemRegistry" store that is
// opened and added to the collection.
//
// The system store name is passed in pvPara. The name is UNICODE for the
// "_W" provider and ASCII for the "_A" provider. For "_W": given,
// LPCWSTR pwszSystemName; pvPara = (const void *) pwszSystemName;
// For "_A": given,
// LPCSTR pszSystemName; pvPara = (const void *) pszSystemName;
//
// Note, the default (without "_A" or "_W") is UNICODE.
//
// The system store name can't contain any backslashes.
//
// If CERT_SYSTEM_STORE_RELOCATE_FLAG is set in dwFlags, pvPara
// points to a CERT_SYSTEM_STORE_RELOCATE_PARA data structure instead
// of pointing to a null terminated UNICODE or ASCII string.
// Sibling physical stores are also opened as relocated using
// pvPara's hKeyBase.
//
// The CERT_SYSTEM_STORE_SERVICES or CERT_SYSTEM_STORE_USERS system
// store name must be prefixed with the ServiceName or UserName.
// For example, "ServiceName\Trust".
//
// Stores on remote computers can be accessed for the
// CERT_SYSTEM_STORE_LOCAL_MACHINE, CERT_SYSTEM_STORE_SERVICES,
// CERT_SYSTEM_STORE_USERS, CERT_SYSTEM_STORE_LOCAL_MACHINE_GROUP_POLICY
// or CERT_SYSTEM_STORE_LOCAL_MACHINE_ENTERPRISE
// locations by prepending the computer name. For example, a remote
// local machine store is accessed via "\\ComputerName\Trust" or
// "ComputerName\Trust". A remote service store is accessed via
// "\\ComputerName\ServiceName\Trust". The leading "\\" backslashes are
// optional in the ComputerName.
//
// If CERT_STORE_READONLY_FLAG is set, then, the registry is
// RegOpenKey'ed with KEY_READ_ACCESS. Otherwise, the registry is
// RegCreateKey'ed with KEY_ALL_ACCESS.
//
// The "root" store is treated differently from the other system
// stores. Before a certificate is added to or deleted from the "root"
// store, a pop up message box is displayed. The certificate's subject,
// issuer, serial number, time validity, sha1 and md5 thumbprints are
// displayed. The user is given the option to do the add or delete.
// If they don't allow the operation, LastError is set to E_ACCESSDENIED.
//
// CERT_STORE_PROV_SYSTEM_REGISTRY_A
// CERT_STORE_PROV_SYSTEM_REGISTRY_W
// CERT_STORE_PROV_SYSTEM_REGISTRY
// sz_CERT_STORE_PROV_SYSTEM_REGISTRY_W
// sz_CERT_STORE_PROV_SYSTEM_REGISTRY
// Opens the "System" store's default "Physical" store residing in the
// registry. The upper word of the dwFlags
// parameter is used to specify the location of the system store.
//
// After opening the registry key associated with the system name,
// the CERT_STORE_PROV_REG provider is called to complete the open.
//
// The system store name is passed in pvPara. The name is UNICODE for the
// "_W" provider and ASCII for the "_A" provider. For "_W": given,
// LPCWSTR pwszSystemName; pvPara = (const void *) pwszSystemName;
// For "_A": given,
// LPCSTR pszSystemName; pvPara = (const void *) pszSystemName;
//
// Note, the default (without "_A" or "_W") is UNICODE.
//
// If CERT_SYSTEM_STORE_RELOCATE_FLAG is set in dwFlags, pvPara
// points to a CERT_SYSTEM_STORE_RELOCATE_PARA data structure instead
// of pointing to a null terminated UNICODE or ASCII string.
//
// See above for details on prepending a ServiceName and/or ComputerName
// to the store name.
//
// If CERT_STORE_READONLY_FLAG is set, then, the registry is
// RegOpenKey'ed with KEY_READ_ACCESS. Otherwise, the registry is
// RegCreateKey'ed with KEY_ALL_ACCESS.
//
// The "root" store is treated differently from the other system
// stores. Before a certificate is added to or deleted from the "root"
// store, a pop up message box is displayed. The certificate's subject,
// issuer, serial number, time validity, sha1 and md5 thumbprints are
// displayed. The user is given the option to do the add or delete.
// If they don't allow the operation, LastError is set to E_ACCESSDENIED.
//
// CERT_STORE_PROV_PHYSICAL_W
// CERT_STORE_PROV_PHYSICAL
// sz_CERT_STORE_PROV_PHYSICAL_W
// sz_CERT_STORE_PROV_PHYSICAL
// Opens the specified "Physical" store in the "System" store.
//
// Both the system store and physical names are passed in pvPara. The
// names are separated with an intervening "\". For example,
// "Root\.Default". The string is UNICODE.
//
// The system and physical store names can't contain any backslashes.
//
// If CERT_SYSTEM_STORE_RELOCATE_FLAG is set in dwFlags, pvPara
// points to a CERT_SYSTEM_STORE_RELOCATE_PARA data structure instead
// of pointing to a null terminated UNICODE string.
// The specified physical store is opened as relocated using pvPara's
// hKeyBase.
//
// For CERT_SYSTEM_STORE_SERVICES or CERT_SYSTEM_STORE_USERS,
// the system and physical store names
// must be prefixed with the ServiceName or UserName. For example,
// "ServiceName\Root\.Default".
//
// Physical stores on remote computers can be accessed for the
// CERT_SYSTEM_STORE_LOCAL_MACHINE, CERT_SYSTEM_STORE_SERVICES,
// CERT_SYSTEM_STORE_USERS, CERT_SYSTEM_STORE_LOCAL_MACHINE_GROUP_POLICY
// or CERT_SYSTEM_STORE_LOCAL_MACHINE_ENTERPRISE
// locations by prepending the computer name. For example, a remote
// local machine store is accessed via "\\ComputerName\Root\.Default"
// or "ComputerName\Root\.Default". A remote service store is
// accessed via "\\ComputerName\ServiceName\Root\.Default". The
// leading "\\" backslashes are optional in the ComputerName.
//
// CERT_STORE_PROV_COLLECTION
// sz_CERT_STORE_PROV_COLLECTION
// Opens a store that is a collection of other stores. Stores are
// added or removed to/from the collection via the CertAddStoreToCollection
// and CertRemoveStoreFromCollection APIs.
//
// CERT_STORE_PROV_SMART_CARD_W
// CERT_STORE_PROV_SMART_CARD
// sz_CERT_STORE_PROV_SMART_CARD_W
// sz_CERT_STORE_PROV_SMART_CARD
// Opens a store instantiated over a particular smart card storage. pvPara
// identifies where on the card the store is located and is of the
// following format:
//
// Card Name\Provider Name\Provider Type[\Container Name]
//
// Container Name is optional and if NOT specified the Card Name is used
// as the Container Name. Future versions of the provider will support
// instantiating the store over the entire card in which case just
// Card Name ( or id ) will be sufficient.
//
// Here's a list of the predefined provider types (implemented in
// cryptnet.dll):
//
// CERT_STORE_PROV_LDAP_W
// CERT_STORE_PROV_LDAP
// sz_CERT_STORE_PROV_LDAP_W
// sz_CERT_STORE_PROV_LDAP
// Opens a store over the results of the query specified by and LDAP
// URL which is passed in via pvPara. In order to do writes to the
// store the URL must specify a BASE query, no filter and a single
// attribute.
//
//--------------------------------------------------------------------------
function CertOpenStore(lpszStoreProvider: LPCSTR; dwEncodingType: DWORD;
hCryptProv: HCRYPTPROV; dwFlags: DWORD; pvPara: Pointer): HCERTSTORE; stdcall;
{$EXTERNALSYM CertOpenStore}
//+-------------------------------------------------------------------------
// OID Installable Certificate Store Provider Data Structures
//--------------------------------------------------------------------------
// Handle returned by the store provider when opened.
type
HCERTSTOREPROV = Pointer;
{$EXTERNALSYM HCERTSTOREPROV}
// Store Provider OID function's pszFuncName.
const
CRYPT_OID_OPEN_STORE_PROV_FUNC = 'CertDllOpenStoreProv';
{$EXTERNALSYM CRYPT_OID_OPEN_STORE_PROV_FUNC}
// Note, the Store Provider OID function's dwEncodingType is always 0.
// The following information is returned by the provider when opened. Its
// zeroed with cbSize set before the provider is called. If the provider
// doesn't need to be called again after the open it doesn't need to
// make any updates to the CERT_STORE_PROV_INFO.
type
PCERT_STORE_PROV_INFO = ^CERT_STORE_PROV_INFO;
{$EXTERNALSYM PCERT_STORE_PROV_INFO}
_CERT_STORE_PROV_INFO = record
cbSize: DWORD;
cStoreProvFunc: DWORD;
rgpvStoreProvFunc: Pointer;
hStoreProv: HCERTSTOREPROV;
dwStoreProvFlags: DWORD;
hStoreProvFuncAddr2: HCRYPTOIDFUNCADDR;
end;
{$EXTERNALSYM _CERT_STORE_PROV_INFO}
CERT_STORE_PROV_INFO = _CERT_STORE_PROV_INFO;
{$EXTERNALSYM CERT_STORE_PROV_INFO}
TCertStoreProvInfo = CERT_STORE_PROV_INFO;
PCertStoreProvInfo = PCERT_STORE_PROV_INFO;
// Definition of the store provider's open function.
//
// *pStoreProvInfo has been zeroed before the call.
//
// Note, pStoreProvInfo->cStoreProvFunc should be set last. Once set,
// all subsequent store calls, such as CertAddSerializedElementToStore will
// call the appropriate provider callback function.
type
PFN_CERT_DLL_OPEN_STORE_PROV_FUNC = function(
lpszStoreProvider: LPCSTR;
dwEncodingType: DWORD;
hCryptProv: HCRYPTPROV;
dwFlags: DWORD;
pvPara: Pointer;
hCertStore: HCERTSTORE;
var pStoreProvInfo: PCERT_STORE_PROV_INFO): BOOL; stdcall;
{$EXTERNALSYM PFN_CERT_DLL_OPEN_STORE_PROV_FUNC}
PFnCertDllOpenStoreProvFunc = PFN_CERT_DLL_OPEN_STORE_PROV_FUNC;
// The open callback sets the following flag, if it maintains its
// contexts externally and not in the cached store.
const
CERT_STORE_PROV_EXTERNAL_FLAG = $1;
{$EXTERNALSYM CERT_STORE_PROV_EXTERNAL_FLAG}
// The open callback sets the following flag for a successful delete.
// When set, the close callback isn't called.
CERT_STORE_PROV_DELETED_FLAG = $2;
{$EXTERNALSYM CERT_STORE_PROV_DELETED_FLAG}
// The open callback sets the following flag if it doesn't persist store
// changes.
CERT_STORE_PROV_NO_PERSIST_FLAG = $4;
{$EXTERNALSYM CERT_STORE_PROV_NO_PERSIST_FLAG}
// The open callback sets the following flag if the contexts are persisted
// to a system store.
CERT_STORE_PROV_SYSTEM_STORE_FLAG = $8;
{$EXTERNALSYM CERT_STORE_PROV_SYSTEM_STORE_FLAG}
// Indices into the store provider's array of callback functions.
//
// The provider can implement any subset of the following functions. It
// sets pStoreProvInfo->cStoreProvFunc to the last index + 1 and any
// preceding not implemented functions to NULL.
CERT_STORE_PROV_CLOSE_FUNC = 0;
{$EXTERNALSYM CERT_STORE_PROV_CLOSE_FUNC}
CERT_STORE_PROV_READ_CERT_FUNC = 1;
{$EXTERNALSYM CERT_STORE_PROV_READ_CERT_FUNC}
CERT_STORE_PROV_WRITE_CERT_FUNC = 2;
{$EXTERNALSYM CERT_STORE_PROV_WRITE_CERT_FUNC}
CERT_STORE_PROV_DELETE_CERT_FUNC = 3;
{$EXTERNALSYM CERT_STORE_PROV_DELETE_CERT_FUNC}
CERT_STORE_PROV_SET_CERT_PROPERTY_FUNC = 4;
{$EXTERNALSYM CERT_STORE_PROV_SET_CERT_PROPERTY_FUNC}
CERT_STORE_PROV_READ_CRL_FUNC = 5;
{$EXTERNALSYM CERT_STORE_PROV_READ_CRL_FUNC}
CERT_STORE_PROV_WRITE_CRL_FUNC = 6;
{$EXTERNALSYM CERT_STORE_PROV_WRITE_CRL_FUNC}
CERT_STORE_PROV_DELETE_CRL_FUNC = 7;
{$EXTERNALSYM CERT_STORE_PROV_DELETE_CRL_FUNC}
CERT_STORE_PROV_SET_CRL_PROPERTY_FUNC = 8;
{$EXTERNALSYM CERT_STORE_PROV_SET_CRL_PROPERTY_FUNC}
CERT_STORE_PROV_READ_CTL_FUNC = 9;
{$EXTERNALSYM CERT_STORE_PROV_READ_CTL_FUNC}
CERT_STORE_PROV_WRITE_CTL_FUNC = 10;
{$EXTERNALSYM CERT_STORE_PROV_WRITE_CTL_FUNC}
CERT_STORE_PROV_DELETE_CTL_FUNC = 11;
{$EXTERNALSYM CERT_STORE_PROV_DELETE_CTL_FUNC}
CERT_STORE_PROV_SET_CTL_PROPERTY_FUNC = 12;
{$EXTERNALSYM CERT_STORE_PROV_SET_CTL_PROPERTY_FUNC}
CERT_STORE_PROV_CONTROL_FUNC = 13;
{$EXTERNALSYM CERT_STORE_PROV_CONTROL_FUNC}
CERT_STORE_PROV_FIND_CERT_FUNC = 14;
{$EXTERNALSYM CERT_STORE_PROV_FIND_CERT_FUNC}
CERT_STORE_PROV_FREE_FIND_CERT_FUNC = 15;
{$EXTERNALSYM CERT_STORE_PROV_FREE_FIND_CERT_FUNC}
CERT_STORE_PROV_GET_CERT_PROPERTY_FUNC = 16;
{$EXTERNALSYM CERT_STORE_PROV_GET_CERT_PROPERTY_FUNC}
CERT_STORE_PROV_FIND_CRL_FUNC = 17;
{$EXTERNALSYM CERT_STORE_PROV_FIND_CRL_FUNC}
CERT_STORE_PROV_FREE_FIND_CRL_FUNC = 18;
{$EXTERNALSYM CERT_STORE_PROV_FREE_FIND_CRL_FUNC}
CERT_STORE_PROV_GET_CRL_PROPERTY_FUNC = 19;
{$EXTERNALSYM CERT_STORE_PROV_GET_CRL_PROPERTY_FUNC}
CERT_STORE_PROV_FIND_CTL_FUNC = 20;
{$EXTERNALSYM CERT_STORE_PROV_FIND_CTL_FUNC}
CERT_STORE_PROV_FREE_FIND_CTL_FUNC = 21;
{$EXTERNALSYM CERT_STORE_PROV_FREE_FIND_CTL_FUNC}
CERT_STORE_PROV_GET_CTL_PROPERTY_FUNC = 22;
{$EXTERNALSYM CERT_STORE_PROV_GET_CTL_PROPERTY_FUNC}
// Called by CertCloseStore when the store's reference count is
// decremented to 0.
type
PFN_CERT_STORE_PROV_CLOSE = procedure(hStoreProv: HCERTSTOREPROV; dwFlags: DWORD); stdcall;
{$EXTERNALSYM PFN_CERT_STORE_PROV_CLOSE}
PFnCertStoreProvClose = PFN_CERT_STORE_PROV_CLOSE;
// Currently not called directly by the store APIs. However, may be exported
// to support other providers based on it.
//
// Reads the provider's copy of the certificate context. If it exists,
// creates a new certificate context.
PFN_CERT_STORE_PROV_READ_CERT = function(hStoreProv: HCERTSTOREPROV;
pStoreCertContext: PCCERT_CONTEXT; dwFlags: DWORD;
var ppProvCertContext: PCCERT_CONTEXT): BOOL; stdcall;
{$EXTERNALSYM PFN_CERT_STORE_PROV_READ_CERT}
PfnCertStoreProvReadCert = PFN_CERT_STORE_PROV_READ_CERT;
const
CERT_STORE_PROV_WRITE_ADD_FLAG = $1;
{$EXTERNALSYM CERT_STORE_PROV_WRITE_ADD_FLAG}
// Called by CertAddEncodedCertificateToStore,
// CertAddCertificateContextToStore or CertAddSerializedElementToStore before
// adding to the store. The CERT_STORE_PROV_WRITE_ADD_FLAG is set. In
// addition to the encoded certificate, the added pCertContext might also
// have properties.
//
// Returns TRUE if its OK to update the the store.
type
PFN_CERT_STORE_PROV_WRITE_CERT = function(hStoreProv: HCERTSTOREPROV;
pCertContext: PCCERT_CONTEXT; dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM PFN_CERT_STORE_PROV_WRITE_CERT}
PfnCertStoreProvWriteCert = PFN_CERT_STORE_PROV_WRITE_CERT;
// Called by CertDeleteCertificateFromStore before deleting from the
// store.
//
// Returns TRUE if its OK to delete from the store.
PFN_CERT_STORE_PROV_DELETE_CERT = function(hStoreProv: HCERTSTOREPROV;
pCertContext: PCCERT_CONTEXT; dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM PFN_CERT_STORE_PROV_DELETE_CERT}
PfnCertStoreProvDeleteCert = PFN_CERT_STORE_PROV_DELETE_CERT;
// Called by CertSetCertificateContextProperty before setting the
// certificate's property. Also called by CertGetCertificateContextProperty,
// when getting a hash property that needs to be created and then persisted
// via the set.
//
// Upon input, the property hasn't been set for the pCertContext parameter.
//
// Returns TRUE if its OK to set the property.
type
PFN_CERT_STORE_PROV_SET_CERT_PROPERTY = function(hStoreProv: HCERTSTOREPROV;
pCertContext: PCCERT_CONTEXT; dwPropId: DWORD; dwFlags: DWORD;
pvData: Pointer): BOOL; stdcall;
{$EXTERNALSYM PFN_CERT_STORE_PROV_SET_CERT_PROPERTY}
PfnCertStoreProvSetCertProperty = PFN_CERT_STORE_PROV_SET_CERT_PROPERTY;
// Currently not called directly by the store APIs. However, may be exported
// to support other providers based on it.
//
// Reads the provider's copy of the CRL context. If it exists,
// creates a new CRL context.
PFN_CERT_STORE_PROV_READ_CRL = function(hStoreProv: HCERTSTOREPROV;
pStoreCrlContext: PCCRL_CONTEXT; dwFlags: DWORD;
var ppProvCrlContext: PCCRL_CONTEXT): BOOL; stdcall;
{$EXTERNALSYM PFN_CERT_STORE_PROV_READ_CRL}
PfnCertStoreProvReadCrl = PFN_CERT_STORE_PROV_READ_CRL;
// Called by CertAddEncodedCRLToStore,
// CertAddCRLContextToStore or CertAddSerializedElementToStore before
// adding to the store. The CERT_STORE_PROV_WRITE_ADD_FLAG is set. In
// addition to the encoded CRL, the added pCertContext might also
// have properties.
//
// Returns TRUE if its OK to update the the store.
PFN_CERT_STORE_PROV_WRITE_CRL = function(hStoreProv: HCERTSTOREPROV;
pCrlContext: PCCRL_CONTEXT; dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM PFN_CERT_STORE_PROV_WRITE_CRL}
PfnCertStoreProvWriteCrl = PFN_CERT_STORE_PROV_WRITE_CRL;
// Called by CertDeleteCRLFromStore before deleting from the store.
//
// Returns TRUE if its OK to delete from the store.
PFN_CERT_STORE_PROV_DELETE_CRL = function(hStoreProv: HCERTSTOREPROV;
pCrlContext: PCCRL_CONTEXT; dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM PFN_CERT_STORE_PROV_DELETE_CRL}
PfnCertStoreProvDeleteCrl = PFN_CERT_STORE_PROV_DELETE_CRL;
// Called by CertSetCRLContextProperty before setting the
// CRL's property. Also called by CertGetCRLContextProperty,
// when getting a hash property that needs to be created and then persisted
// via the set.
//
// Upon input, the property hasn't been set for the pCrlContext parameter.
//
// Returns TRUE if its OK to set the property.
PFN_CERT_STORE_PROV_SET_CRL_PROPERTY = function(hStoreProv: HCERTSTOREPROV;
pCrlContext: PCCRL_CONTEXT; dwPropId: DWORD; dwFlags: DWORD;
pvData: Pointer): BOOL; stdcall;
{$EXTERNALSYM PFN_CERT_STORE_PROV_SET_CRL_PROPERTY}
PfnCertStoreProvSetCrlProperty = PFN_CERT_STORE_PROV_SET_CRL_PROPERTY;
// Currently not called directly by the store APIs. However, may be exported
// to support other providers based on it.
//
// Reads the provider's copy of the CTL context. If it exists,
// creates a new CTL context.
PFN_CERT_STORE_PROV_READ_CTL = function(hStoreProv: HCERTSTOREPROV;
pStoreCtlContext: PCCTL_CONTEXT; dwFlags: DWORD;
var ppProvCtlContext: PCCTL_CONTEXT): BOOL; stdcall;
{$EXTERNALSYM PFN_CERT_STORE_PROV_READ_CTL}
PfnCertStoreProvReadCtl = PFN_CERT_STORE_PROV_READ_CTL;
// Called by CertAddEncodedCTLToStore,
// CertAddCTLContextToStore or CertAddSerializedElementToStore before
// adding to the store. The CERT_STORE_PROV_WRITE_ADD_FLAG is set. In
// addition to the encoded CTL, the added pCertContext might also
// have properties.
//
// Returns TRUE if its OK to update the the store.
PFN_CERT_STORE_PROV_WRITE_CTL = function(hStoreProv: HCERTSTOREPROV;
pCtlContext: PCCTL_CONTEXT; dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM PFN_CERT_STORE_PROV_WRITE_CTL}
PfnCertStoreProvWriteCtl = PFN_CERT_STORE_PROV_WRITE_CTL;
// Called by CertDeleteCTLFromStore before deleting from the store.
//
// Returns TRUE if its OK to delete from the store.
PFN_CERT_STORE_PROV_DELETE_CTL = function(hStoreProv: HCERTSTOREPROV;
pCtlContext: PCCTL_CONTEXT; dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM PFN_CERT_STORE_PROV_DELETE_CTL}
PfnCertStoreProvDeleteCtl = PFN_CERT_STORE_PROV_DELETE_CTL;
// Called by CertSetCTLContextProperty before setting the
// CTL's property. Also called by CertGetCTLContextProperty,
// when getting a hash property that needs to be created and then persisted
// via the set.
//
// Upon input, the property hasn't been set for the pCtlContext parameter.
//
// Returns TRUE if its OK to set the property.
PFN_CERT_STORE_PROV_SET_CTL_PROPERTY = function(hStoreProv: HCERTSTOREPROV;
pCtlContext: PCCTL_CONTEXT; dwPropId, dwFlags: DWORD; pvData: Pointer): BOOL; stdcall;
{$EXTERNALSYM PFN_CERT_STORE_PROV_SET_CTL_PROPERTY}
PfnCertStoreProvSetCtlProperty = PFN_CERT_STORE_PROV_SET_CTL_PROPERTY;
PFN_CERT_STORE_PROV_CONTROL = function(hStoreProv: HCERTSTOREPROV;
dwFlags: DWORD; dwCtrlType: DWORD; pvCtrlPara: Pointer): BOOL; stdcall;
{$EXTERNALSYM PFN_CERT_STORE_PROV_CONTROL}
PfnCertStoreProvControl = PFN_CERT_STORE_PROV_CONTROL;
PCERT_STORE_PROV_FIND_INFO = ^CERT_STORE_PROV_FIND_INFO;
{$EXTERNALSYM PCERT_STORE_PROV_FIND_INFO}
_CERT_STORE_PROV_FIND_INFO = record
cbSize: DWORD;
dwMsgAndCertEncodingType: DWORD;
dwFindFlags: DWORD;
dwFindType: DWORD;
pvFindPara: Pointer;
end;
{$EXTERNALSYM _CERT_STORE_PROV_FIND_INFO}
CERT_STORE_PROV_FIND_INFO = _CERT_STORE_PROV_FIND_INFO;
{$EXTERNALSYM CERT_STORE_PROV_FIND_INFO}
TCertStoreProvFindInfo = CERT_STORE_PROV_FIND_INFO;
PCertStoreProvFindInfo = PCERT_STORE_PROV_FIND_INFO;
CCERT_STORE_PROV_FIND_INFO = CERT_STORE_PROV_FIND_INFO;
{$EXTERNALSYM CCERT_STORE_PROV_FIND_INFO}
PCCERT_STORE_PROV_FIND_INFO = PCERT_STORE_PROV_FIND_INFO;
{$EXTERNALSYM PCCERT_STORE_PROV_FIND_INFO}
PFN_CERT_STORE_PROV_FIND_CERT = function(hStoreProv: HCERTSTOREPROV;
pFindInfo: PCCERT_STORE_PROV_FIND_INFO; pPrevCertContext: PCCERT_CONTEXT;
dwFlags: DWORD; var ppvStoreProvFindInfo: Pointer;
var ppProvCertContext: PCCERT_CONTEXT): BOOL; stdcall;
{$EXTERNALSYM PFN_CERT_STORE_PROV_FIND_CERT}
PfnCertStoreProvFindCert = PFN_CERT_STORE_PROV_FIND_CERT;
PFN_CERT_STORE_PROV_FREE_FIND_CERT = function(hStoreProv: HCERTSTOREPROV;
pCertContext: PCCERT_CONTEXT; pvStoreProvFindInfo: Pointer; dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM PFN_CERT_STORE_PROV_FREE_FIND_CERT}
PfnCertStoreProvFreeFindCert = PFN_CERT_STORE_PROV_FREE_FIND_CERT;
PFN_CERT_STORE_PROV_GET_CERT_PROPERTY = function(hStoreProv: HCERTSTOREPROV;
pCertContext: PCCERT_CONTEXT; dwPropId: DWORD; dwFlags: DWORD; pvData: Pointer;
var pcbData: DWORD): BOOL; stdcall;
{$EXTERNALSYM PFN_CERT_STORE_PROV_GET_CERT_PROPERTY}
PfnCertStoreProvGetCertProperty = PFN_CERT_STORE_PROV_GET_CERT_PROPERTY;
PFN_CERT_STORE_PROV_FIND_CRL = function(hStoreProv: HCERTSTOREPROV;
pFindInfo: PCCERT_STORE_PROV_FIND_INFO; pPrevCrlContext: PCCRL_CONTEXT;
dwFlags: DWORD; var ppvStoreProvFindInfo: Pointer;
var ppProvCrlContext: PCCRL_CONTEXT): BOOL; stdcall;
{$EXTERNALSYM PFN_CERT_STORE_PROV_FIND_CRL}
PfnCertStoreProvFindCrl = PFN_CERT_STORE_PROV_FIND_CRL;
PFN_CERT_STORE_PROV_FREE_FIND_CRL = function(hStoreProv: HCERTSTOREPROV;
pCrlContext: PCCRL_CONTEXT; pvStoreProvFindInfo: Pointer; dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM PFN_CERT_STORE_PROV_FREE_FIND_CRL}
PfnCertStoreProvFreeFindCrl = PFN_CERT_STORE_PROV_FREE_FIND_CRL;
PFN_CERT_STORE_PROV_GET_CRL_PROPERTY = function(hStoreProv: HCERTSTOREPROV;
pCrlContext: PCCRL_CONTEXT; dwPropId: DWORD; dwFlags: DWORD; pvData: Pointer;
var pcbData: DWORD): BOOL; stdcall;
{$EXTERNALSYM PFN_CERT_STORE_PROV_GET_CRL_PROPERTY}
PfnCertStoreProvGetCrlProperty = PFN_CERT_STORE_PROV_GET_CRL_PROPERTY;
PFN_CERT_STORE_PROV_FIND_CTL = function(hStoreProv: HCERTSTOREPROV;
pFindInfo: PCCERT_STORE_PROV_FIND_INFO; pPrevCtlContext: PCCTL_CONTEXT;
dwFlags: DWORD; var ppvStoreProvFindInfo: Pointer;
var ppProvCtlContext: PCCTL_CONTEXT): BOOL; stdcall;
{$EXTERNALSYM PFN_CERT_STORE_PROV_FIND_CTL}
PfnCertStoreProvFindCtl = PFN_CERT_STORE_PROV_FIND_CTL;
PFN_CERT_STORE_PROV_FREE_FIND_CTL = function(hStoreProv: HCERTSTOREPROV;
pCtlContext: PCCTL_CONTEXT; pvStoreProvFindInfo: Pointer; dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM PFN_CERT_STORE_PROV_FREE_FIND_CTL}
PfnCertStoreProvFreeFindCtl = PFN_CERT_STORE_PROV_FREE_FIND_CTL;
PFN_CERT_STORE_PROV_GET_CTL_PROPERTY = function(hStoreProv: HCERTSTOREPROV;
pCtlContext: PCCTL_CONTEXT; dwPropId: DWORD; dwFlags: DWORD; pvData: Pointer;
var pcbData: DWORD): BOOL; stdcall;
{$EXTERNALSYM PFN_CERT_STORE_PROV_GET_CTL_PROPERTY}
PfnCertStoreProvGetCtlProperty = PFN_CERT_STORE_PROV_GET_CTL_PROPERTY;
//+-------------------------------------------------------------------------
// Duplicate a cert store handle
//--------------------------------------------------------------------------
function CertDuplicateStore(hCertStore: HCERTSTORE): HCERTSTORE; stdcall;
{$EXTERNALSYM CertDuplicateStore}
const
CERT_STORE_SAVE_AS_STORE = 1;
{$EXTERNALSYM CERT_STORE_SAVE_AS_STORE}
CERT_STORE_SAVE_AS_PKCS7 = 2;
{$EXTERNALSYM CERT_STORE_SAVE_AS_PKCS7}
CERT_STORE_SAVE_TO_FILE = 1;
{$EXTERNALSYM CERT_STORE_SAVE_TO_FILE}
CERT_STORE_SAVE_TO_MEMORY = 2;
{$EXTERNALSYM CERT_STORE_SAVE_TO_MEMORY}
CERT_STORE_SAVE_TO_FILENAME_A = 3;
{$EXTERNALSYM CERT_STORE_SAVE_TO_FILENAME_A}
CERT_STORE_SAVE_TO_FILENAME_W = 4;
{$EXTERNALSYM CERT_STORE_SAVE_TO_FILENAME_W}
CERT_STORE_SAVE_TO_FILENAME = CERT_STORE_SAVE_TO_FILENAME_W;
{$EXTERNALSYM CERT_STORE_SAVE_TO_FILENAME}
//+-------------------------------------------------------------------------
// Save the cert store. Extended version with lots of options.
//
// According to the dwSaveAs parameter, the store can be saved as a
// serialized store (CERT_STORE_SAVE_AS_STORE) containing properties in
// addition to encoded certificates, CRLs and CTLs or the store can be saved
// as a PKCS #7 signed message (CERT_STORE_SAVE_AS_PKCS7) which doesn't
// include the properties or CTLs.
//
// Note, the CERT_KEY_CONTEXT_PROP_ID property (and its
// CERT_KEY_PROV_HANDLE_PROP_ID or CERT_KEY_SPEC_PROP_ID) isn't saved into
// a serialized store.
//
// For CERT_STORE_SAVE_AS_PKCS7, the dwEncodingType specifies the message
// encoding type. The dwEncodingType parameter isn't used for
// CERT_STORE_SAVE_AS_STORE.
//
// The dwFlags parameter currently isn't used and should be set to 0.
//
// The dwSaveTo and pvSaveToPara parameters specify where to save the
// store as follows:
// CERT_STORE_SAVE_TO_FILE:
// Saves to the specified file. The file's handle is passed in
// pvSaveToPara. Given,
// HANDLE hFile; pvSaveToPara = (void *) hFile;
//
// For a successful save, the file pointer is positioned after the
// last write.
//
// CERT_STORE_SAVE_TO_MEMORY:
// Saves to the specified memory blob. The pointer to
// the memory blob is passed in pvSaveToPara. Given,
// CRYPT_DATA_BLOB SaveBlob; pvSaveToPara = (void *) &SaveBlob;
// Upon entry, the SaveBlob's pbData and cbData need to be initialized.
// Upon return, cbData is updated with the actual length.
// For a length only calculation, pbData should be set to NULL. If
// pbData is non-NULL and cbData isn't large enough, FALSE is returned
// with a last error of ERRROR_MORE_DATA.
//
// CERT_STORE_SAVE_TO_FILENAME_A:
// CERT_STORE_SAVE_TO_FILENAME_W:
// CERT_STORE_SAVE_TO_FILENAME:
// Opens the file and saves to it. The filename is passed in pvSaveToPara.
// The filename is UNICODE for the "_W" option and ASCII for the "_A"
// option. For "_W": given,
// LPCWSTR pwszFilename; pvSaveToPara = (void *) pwszFilename;
// For "_A": given,
// LPCSTR pszFilename; pvSaveToPara = (void *) pszFilename;
//
// Note, the default (without "_A" or "_W") is UNICODE.
//
//--------------------------------------------------------------------------
function CertSaveStore(hCertStore: HCERTSTORE; dwEncodingType, dwSaveAs: DWORD;
dwSaveTo: DWORD; pvSaveToPara: Pointer; dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM CertSaveStore}
//+-------------------------------------------------------------------------
// Certificate Store close flags
//--------------------------------------------------------------------------
const
CERT_CLOSE_STORE_FORCE_FLAG = $00000001;
{$EXTERNALSYM CERT_CLOSE_STORE_FORCE_FLAG}
CERT_CLOSE_STORE_CHECK_FLAG = $00000002;
{$EXTERNALSYM CERT_CLOSE_STORE_CHECK_FLAG}
//+-------------------------------------------------------------------------
// Close a cert store handle.
//
// There needs to be a corresponding close for each open and duplicate.
//
// Even on the final close, the cert store isn't freed until all of its
// certificate and CRL contexts have also been freed.
//
// On the final close, the hCryptProv passed to CertStoreOpen is
// CryptReleaseContext'ed.
//
// To force the closure of the store with all of its memory freed, set the
// CERT_STORE_CLOSE_FORCE_FLAG. This flag should be set when the caller does
// its own reference counting and wants everything to vanish.
//
// To check if all the store's certificates and CRLs have been freed and that
// this is the last CertCloseStore, set the CERT_CLOSE_STORE_CHECK_FLAG. If
// set and certs, CRLs or stores still need to be freed/closed, FALSE is
// returned with LastError set to CRYPT_E_PENDING_CLOSE. Note, for FALSE,
// the store is still closed. This is a diagnostic flag.
//
// LastError is preserved unless CERT_CLOSE_STORE_CHECK_FLAG is set and FALSE
// is returned.
//--------------------------------------------------------------------------
function CertCloseStore(hCertStore: HCERTSTORE; dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM CertCloseStore}
//+-------------------------------------------------------------------------
// Get the subject certificate context uniquely identified by its Issuer and
// SerialNumber from the store.
//
// If the certificate isn't found, NULL is returned. Otherwise, a pointer to
// a read only CERT_CONTEXT is returned. CERT_CONTEXT must be freed by calling
// CertFreeCertificateContext. CertDuplicateCertificateContext can be called to make a
// duplicate.
//
// The returned certificate might not be valid. Normally, it would be
// verified when getting its issuer certificate (CertGetIssuerCertificateFromStore).
//--------------------------------------------------------------------------
function CertGetSubjectCertificateFromStore(hCertStore: HCERTSTORE;
dwCertEncodingType: DWORD; pCertId: PCERT_INFO): PCCERT_CONTEXT; stdcall;
{$EXTERNALSYM CertGetSubjectCertificateFromStore}
//+-------------------------------------------------------------------------
// Enumerate the certificate contexts in the store.
//
// If a certificate isn't found, NULL is returned.
// Otherwise, a pointer to a read only CERT_CONTEXT is returned. CERT_CONTEXT
// must be freed by calling CertFreeCertificateContext or is freed when passed as the
// pPrevCertContext on a subsequent call. CertDuplicateCertificateContext
// can be called to make a duplicate.
//
// pPrevCertContext MUST BE NULL to enumerate the first
// certificate in the store. Successive certificates are enumerated by setting
// pPrevCertContext to the CERT_CONTEXT returned by a previous call.
//
// NOTE: a NON-NULL pPrevCertContext is always CertFreeCertificateContext'ed by
// this function, even for an error.
//--------------------------------------------------------------------------
function CertEnumCertificatesInStore(hCertStore: HCERTSTORE;
pPrevCertContext: PCCERT_CONTEXT): PCCERT_CONTEXT; stdcall;
{$EXTERNALSYM CertEnumCertificatesInStore}
//+-------------------------------------------------------------------------
// Find the first or next certificate context in the store.
//
// The certificate is found according to the dwFindType and its pvFindPara.
// See below for a list of the find types and its parameters.
//
// Currently dwFindFlags is only used for CERT_FIND_SUBJECT_ATTR,
// CERT_FIND_ISSUER_ATTR or CERT_FIND_CTL_USAGE. Otherwise, must be set to 0.
//
// Usage of dwCertEncodingType depends on the dwFindType.
//
// If the first or next certificate isn't found, NULL is returned.
// Otherwise, a pointer to a read only CERT_CONTEXT is returned. CERT_CONTEXT
// must be freed by calling CertFreeCertificateContext or is freed when passed as the
// pPrevCertContext on a subsequent call. CertDuplicateCertificateContext
// can be called to make a duplicate.
//
// pPrevCertContext MUST BE NULL on the first
// call to find the certificate. To find the next certificate, the
// pPrevCertContext is set to the CERT_CONTEXT returned by a previous call.
//
// NOTE: a NON-NULL pPrevCertContext is always CertFreeCertificateContext'ed by
// this function, even for an error.
//--------------------------------------------------------------------------
function CertFindCertificateInStore(hCertStore: HCERTSTORE;
dwCertEncodingType, dwFindFlags, dwFindType: DWORD; pvFindPara: Pointer;
pPrevCertContext: PCCERT_CONTEXT): PCCERT_CONTEXT; stdcall;
{$EXTERNALSYM CertFindCertificateInStore}
//+-------------------------------------------------------------------------
// Certificate comparison functions
//--------------------------------------------------------------------------
const
CERT_COMPARE_MASK = $FFFF;
{$EXTERNALSYM CERT_COMPARE_MASK}
CERT_COMPARE_SHIFT = 16;
{$EXTERNALSYM CERT_COMPARE_SHIFT}
CERT_COMPARE_ANY = 0;
{$EXTERNALSYM CERT_COMPARE_ANY}
CERT_COMPARE_SHA1_HASH = 1;
{$EXTERNALSYM CERT_COMPARE_SHA1_HASH}
CERT_COMPARE_NAME = 2;
{$EXTERNALSYM CERT_COMPARE_NAME}
CERT_COMPARE_ATTR = 3;
{$EXTERNALSYM CERT_COMPARE_ATTR}
CERT_COMPARE_MD5_HASH = 4;
{$EXTERNALSYM CERT_COMPARE_MD5_HASH}
CERT_COMPARE_PROPERTY = 5;
{$EXTERNALSYM CERT_COMPARE_PROPERTY}
CERT_COMPARE_PUBLIC_KEY = 6;
{$EXTERNALSYM CERT_COMPARE_PUBLIC_KEY}
CERT_COMPARE_HASH = CERT_COMPARE_SHA1_HASH;
{$EXTERNALSYM CERT_COMPARE_HASH}
CERT_COMPARE_NAME_STR_A = 7;
{$EXTERNALSYM CERT_COMPARE_NAME_STR_A}
CERT_COMPARE_NAME_STR_W = 8;
{$EXTERNALSYM CERT_COMPARE_NAME_STR_W}
CERT_COMPARE_KEY_SPEC = 9;
{$EXTERNALSYM CERT_COMPARE_KEY_SPEC}
CERT_COMPARE_ENHKEY_USAGE = 10;
{$EXTERNALSYM CERT_COMPARE_ENHKEY_USAGE}
CERT_COMPARE_CTL_USAGE = CERT_COMPARE_ENHKEY_USAGE;
{$EXTERNALSYM CERT_COMPARE_CTL_USAGE}
CERT_COMPARE_SUBJECT_CERT = 11;
{$EXTERNALSYM CERT_COMPARE_SUBJECT_CERT}
CERT_COMPARE_ISSUER_OF = 12;
{$EXTERNALSYM CERT_COMPARE_ISSUER_OF}
CERT_COMPARE_EXISTING = 13;
{$EXTERNALSYM CERT_COMPARE_EXISTING}
CERT_COMPARE_SIGNATURE_HASH = 14;
{$EXTERNALSYM CERT_COMPARE_SIGNATURE_HASH}
CERT_COMPARE_KEY_IDENTIFIER = 15;
{$EXTERNALSYM CERT_COMPARE_KEY_IDENTIFIER}
CERT_COMPARE_CERT_ID = 16;
{$EXTERNALSYM CERT_COMPARE_CERT_ID}
//+-------------------------------------------------------------------------
// dwFindType
//
// The dwFindType definition consists of two components:
// - comparison function
// - certificate information flag
//--------------------------------------------------------------------------
CERT_FIND_ANY = CERT_COMPARE_ANY shl CERT_COMPARE_SHIFT;
{$EXTERNALSYM CERT_FIND_ANY}
CERT_FIND_SHA1_HASH = CERT_COMPARE_SHA1_HASH shl CERT_COMPARE_SHIFT;
{$EXTERNALSYM CERT_FIND_SHA1_HASH}
CERT_FIND_MD5_HASH = CERT_COMPARE_MD5_HASH shl CERT_COMPARE_SHIFT;
{$EXTERNALSYM CERT_FIND_MD5_HASH}
CERT_FIND_SIGNATURE_HASH = CERT_COMPARE_SIGNATURE_HASH shl CERT_COMPARE_SHIFT;
{$EXTERNALSYM CERT_FIND_SIGNATURE_HASH}
CERT_FIND_KEY_IDENTIFIER = CERT_COMPARE_KEY_IDENTIFIER shl CERT_COMPARE_SHIFT;
{$EXTERNALSYM CERT_FIND_KEY_IDENTIFIER}
CERT_FIND_HASH = CERT_FIND_SHA1_HASH;
{$EXTERNALSYM CERT_FIND_HASH}
CERT_FIND_PROPERTY = CERT_COMPARE_PROPERTY shl CERT_COMPARE_SHIFT;
{$EXTERNALSYM CERT_FIND_PROPERTY}
CERT_FIND_PUBLIC_KEY = CERT_COMPARE_PUBLIC_KEY shl CERT_COMPARE_SHIFT;
{$EXTERNALSYM CERT_FIND_PUBLIC_KEY}
CERT_FIND_SUBJECT_NAME = CERT_COMPARE_NAME shl CERT_COMPARE_SHIFT or CERT_INFO_SUBJECT_FLAG;
{$EXTERNALSYM CERT_FIND_SUBJECT_NAME}
CERT_FIND_SUBJECT_ATTR = CERT_COMPARE_ATTR shl CERT_COMPARE_SHIFT or CERT_INFO_SUBJECT_FLAG;
{$EXTERNALSYM CERT_FIND_SUBJECT_ATTR}
CERT_FIND_ISSUER_NAME = CERT_COMPARE_NAME shl CERT_COMPARE_SHIFT or CERT_INFO_ISSUER_FLAG;
{$EXTERNALSYM CERT_FIND_ISSUER_NAME}
CERT_FIND_ISSUER_ATTR = CERT_COMPARE_ATTR shl CERT_COMPARE_SHIFT or CERT_INFO_ISSUER_FLAG;
{$EXTERNALSYM CERT_FIND_ISSUER_ATTR}
CERT_FIND_SUBJECT_STR_A = CERT_COMPARE_NAME_STR_A shl CERT_COMPARE_SHIFT or CERT_INFO_SUBJECT_FLAG;
{$EXTERNALSYM CERT_FIND_SUBJECT_STR_A}
CERT_FIND_SUBJECT_STR_W = CERT_COMPARE_NAME_STR_W shl CERT_COMPARE_SHIFT or CERT_INFO_SUBJECT_FLAG;
{$EXTERNALSYM CERT_FIND_SUBJECT_STR_W}
CERT_FIND_SUBJECT_STR = CERT_FIND_SUBJECT_STR_W;
{$EXTERNALSYM CERT_FIND_SUBJECT_STR}
CERT_FIND_ISSUER_STR_A = CERT_COMPARE_NAME_STR_A shl CERT_COMPARE_SHIFT or CERT_INFO_ISSUER_FLAG;
{$EXTERNALSYM CERT_FIND_ISSUER_STR_A}
CERT_FIND_ISSUER_STR_W = CERT_COMPARE_NAME_STR_W shl CERT_COMPARE_SHIFT or CERT_INFO_ISSUER_FLAG;
{$EXTERNALSYM CERT_FIND_ISSUER_STR_W}
CERT_FIND_ISSUER_STR = CERT_FIND_ISSUER_STR_W;
{$EXTERNALSYM CERT_FIND_ISSUER_STR}
CERT_FIND_KEY_SPEC = CERT_COMPARE_KEY_SPEC shl CERT_COMPARE_SHIFT;
{$EXTERNALSYM CERT_FIND_KEY_SPEC}
CERT_FIND_ENHKEY_USAGE = CERT_COMPARE_ENHKEY_USAGE shl CERT_COMPARE_SHIFT;
{$EXTERNALSYM CERT_FIND_ENHKEY_USAGE}
CERT_FIND_CTL_USAGE = CERT_FIND_ENHKEY_USAGE;
{$EXTERNALSYM CERT_FIND_CTL_USAGE}
CERT_FIND_SUBJECT_CERT = CERT_COMPARE_SUBJECT_CERT shl CERT_COMPARE_SHIFT;
{$EXTERNALSYM CERT_FIND_SUBJECT_CERT}
CERT_FIND_ISSUER_OF = CERT_COMPARE_ISSUER_OF shl CERT_COMPARE_SHIFT;
{$EXTERNALSYM CERT_FIND_ISSUER_OF}
CERT_FIND_EXISTING = CERT_COMPARE_EXISTING shl CERT_COMPARE_SHIFT;
{$EXTERNALSYM CERT_FIND_EXISTING}
CERT_FIND_CERT_ID = CERT_COMPARE_CERT_ID shl CERT_COMPARE_SHIFT;
{$EXTERNALSYM CERT_FIND_CERT_ID}
//+-------------------------------------------------------------------------
// CERT_FIND_ANY
//
// Find any certificate.
//
// pvFindPara isn't used.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CERT_FIND_HASH
//
// Find a certificate with the specified hash.
//
// pvFindPara points to a CRYPT_HASH_BLOB.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CERT_FIND_KEY_IDENTIFIER
//
// Find a certificate with the specified KeyIdentifier. Gets the
// CERT_KEY_IDENTIFIER_PROP_ID property and compares with the input
// CRYPT_HASH_BLOB.
//
// pvFindPara points to a CRYPT_HASH_BLOB.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CERT_FIND_PROPERTY
//
// Find a certificate having the specified property.
//
// pvFindPara points to a DWORD containing the PROP_ID
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CERT_FIND_PUBLIC_KEY
//
// Find a certificate matching the specified public key.
//
// pvFindPara points to a CERT_PUBLIC_KEY_INFO containing the public key
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CERT_FIND_SUBJECT_NAME
// CERT_FIND_ISSUER_NAME
//
// Find a certificate with the specified subject/issuer name. Does an exact
// match of the entire name.
//
// Restricts search to certificates matching the dwCertEncodingType.
//
// pvFindPara points to a CERT_NAME_BLOB.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CERT_FIND_SUBJECT_ATTR
// CERT_FIND_ISSUER_ATTR
//
// Find a certificate with the specified subject/issuer attributes.
//
// Compares the attributes in the subject/issuer name with the
// Relative Distinguished Name's (CERT_RDN) array of attributes specified in
// pvFindPara. The comparison iterates through the CERT_RDN attributes and looks
// for an attribute match in any of the subject/issuer's RDNs.
//
// The CERT_RDN_ATTR fields can have the following special values:
// pszObjId == NULL - ignore the attribute object identifier
// dwValueType == RDN_ANY_TYPE - ignore the value type
// Value.pbData == NULL - match any value
//
// CERT_CASE_INSENSITIVE_IS_RDN_ATTRS_FLAG should be set in dwFindFlags to do
// a case insensitive match. Otherwise, defaults to an exact, case sensitive
// match.
//
// CERT_UNICODE_IS_RDN_ATTRS_FLAG should be set in dwFindFlags if the RDN was
// initialized with unicode strings as for
// CryptEncodeObject(X509_UNICODE_NAME).
//
// Restricts search to certificates matching the dwCertEncodingType.
//
// pvFindPara points to a CERT_RDN (defined in wincert.h).
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CERT_FIND_SUBJECT_STR_A
// CERT_FIND_SUBJECT_STR_W | CERT_FIND_SUBJECT_STR
// CERT_FIND_ISSUER_STR_A
// CERT_FIND_ISSUER_STR_W | CERT_FIND_ISSUER_STR
//
// Find a certificate containing the specified subject/issuer name string.
//
// First, the certificate's subject/issuer is converted to a name string
// via CertNameToStrA/CertNameToStrW(CERT_SIMPLE_NAME_STR). Then, a
// case insensitive substring within string match is performed.
//
// Restricts search to certificates matching the dwCertEncodingType.
//
// For *_STR_A, pvFindPara points to a null terminated character string.
// For *_STR_W, pvFindPara points to a null terminated wide character string.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CERT_FIND_KEY_SPEC
//
// Find a certificate having a CERT_KEY_SPEC_PROP_ID property matching
// the specified KeySpec.
//
// pvFindPara points to a DWORD containing the KeySpec.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CERT_FIND_ENHKEY_USAGE
//
// Find a certificate having the szOID_ENHANCED_KEY_USAGE extension or
// the CERT_ENHKEY_USAGE_PROP_ID and matching the specified pszUsageIdentifers.
//
// pvFindPara points to a CERT_ENHKEY_USAGE data structure. If pvFindPara
// is NULL or CERT_ENHKEY_USAGE's cUsageIdentifier is 0, then, matches any
// certificate having enhanced key usage.
//
// If the CERT_FIND_VALID_ENHKEY_USAGE_FLAG is set, then, only does a match
// for certificates that are valid for the specified usages. By default,
// the ceriticate must be valid for all usages. CERT_FIND_OR_ENHKEY_USAGE_FLAG
// can be set, if the certificate only needs to be valid for one of the
// specified usages. Note, CertGetValidUsages() is called to get the
// certificate's list of valid usages. Only the CERT_FIND_OR_ENHKEY_USAGE_FLAG
// is applicable when this flag is set.
//
// The CERT_FIND_OPTIONAL_ENHKEY_USAGE_FLAG can be set in dwFindFlags to
// also match a certificate without either the extension or property.
//
// If CERT_FIND_NO_ENHKEY_USAGE_FLAG is set in dwFindFlags, finds
// certificates without the key usage extension or property. Setting this
// flag takes precedence over pvFindPara being NULL.
//
// If the CERT_FIND_EXT_ONLY_ENHKEY_USAGE_FLAG is set, then, only does a match
// using the extension. If pvFindPara is NULL or cUsageIdentifier is set to
// 0, finds certificates having the extension. If
// CERT_FIND_OPTIONAL_ENHKEY_USAGE_FLAG is set, also matches a certificate
// without the extension. If CERT_FIND_NO_ENHKEY_USAGE_FLAG is set, finds
// certificates without the extension.
//
// If the CERT_FIND_PROP_ONLY_ENHKEY_USAGE_FLAG is set, then, only does a match
// using the property. If pvFindPara is NULL or cUsageIdentifier is set to
// 0, finds certificates having the property. If
// CERT_FIND_OPTIONAL_ENHKEY_USAGE_FLAG is set, also matches a certificate
// without the property. If CERT_FIND_NO_ENHKEY_USAGE_FLAG is set, finds
// certificates without the property.
//
// If CERT_FIND_OR_ENHKEY_USAGE_FLAG is set, does an "OR" match of any of
// the specified pszUsageIdentifiers. If not set, then, does an "AND" match
// of all of the specified pszUsageIdentifiers.
//--------------------------------------------------------------------------
const
CERT_FIND_OPTIONAL_ENHKEY_USAGE_FLAG = $1;
{$EXTERNALSYM CERT_FIND_OPTIONAL_ENHKEY_USAGE_FLAG}
CERT_FIND_EXT_ONLY_ENHKEY_USAGE_FLAG = $2;
{$EXTERNALSYM CERT_FIND_EXT_ONLY_ENHKEY_USAGE_FLAG}
CERT_FIND_PROP_ONLY_ENHKEY_USAGE_FLAG = $4;
{$EXTERNALSYM CERT_FIND_PROP_ONLY_ENHKEY_USAGE_FLAG}
CERT_FIND_NO_ENHKEY_USAGE_FLAG = $8;
{$EXTERNALSYM CERT_FIND_NO_ENHKEY_USAGE_FLAG}
CERT_FIND_OR_ENHKEY_USAGE_FLAG = $10;
{$EXTERNALSYM CERT_FIND_OR_ENHKEY_USAGE_FLAG}
CERT_FIND_VALID_ENHKEY_USAGE_FLAG = $20;
{$EXTERNALSYM CERT_FIND_VALID_ENHKEY_USAGE_FLAG}
CERT_FIND_OPTIONAL_CTL_USAGE_FLAG = CERT_FIND_OPTIONAL_ENHKEY_USAGE_FLAG;
{$EXTERNALSYM CERT_FIND_OPTIONAL_CTL_USAGE_FLAG}
CERT_FIND_EXT_ONLY_CTL_USAGE_FLAG = CERT_FIND_EXT_ONLY_ENHKEY_USAGE_FLAG;
{$EXTERNALSYM CERT_FIND_EXT_ONLY_CTL_USAGE_FLAG}
CERT_FIND_PROP_ONLY_CTL_USAGE_FLAG = CERT_FIND_PROP_ONLY_ENHKEY_USAGE_FLAG;
{$EXTERNALSYM CERT_FIND_PROP_ONLY_CTL_USAGE_FLAG}
CERT_FIND_NO_CTL_USAGE_FLAG = CERT_FIND_NO_ENHKEY_USAGE_FLAG;
{$EXTERNALSYM CERT_FIND_NO_CTL_USAGE_FLAG}
CERT_FIND_OR_CTL_USAGE_FLAG = CERT_FIND_OR_ENHKEY_USAGE_FLAG;
{$EXTERNALSYM CERT_FIND_OR_CTL_USAGE_FLAG}
CERT_FIND_VALID_CTL_USAGE_FLAG = CERT_FIND_VALID_ENHKEY_USAGE_FLAG;
{$EXTERNALSYM CERT_FIND_VALID_CTL_USAGE_FLAG}
//+-------------------------------------------------------------------------
// CERT_FIND_CERT_ID
//
// Find a certificate with the specified CERT_ID.
//
// pvFindPara points to a CERT_ID.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// Get the certificate context from the store for the first or next issuer
// of the specified subject certificate. Perform the enabled
// verification checks on the subject. (Note, the checks are on the subject
// using the returned issuer certificate.)
//
// If the first or next issuer certificate isn't found, NULL is returned.
// Otherwise, a pointer to a read only CERT_CONTEXT is returned. CERT_CONTEXT
// must be freed by calling CertFreeCertificateContext or is freed when passed as the
// pPrevIssuerContext on a subsequent call. CertDuplicateCertificateContext
// can be called to make a duplicate.
//
// For a self signed subject certificate, NULL is returned with LastError set
// to CERT_STORE_SELF_SIGNED. The enabled verification checks are still done.
//
// The pSubjectContext may have been obtained from this store, another store
// or created by the caller application. When created by the caller, the
// CertCreateCertificateContext function must have been called.
//
// An issuer may have multiple certificates. This may occur when the validity
// period is about to change. pPrevIssuerContext MUST BE NULL on the first
// call to get the issuer. To get the next certificate for the issuer, the
// pPrevIssuerContext is set to the CERT_CONTEXT returned by a previous call.
//
// NOTE: a NON-NULL pPrevIssuerContext is always CertFreeCertificateContext'ed by
// this function, even for an error.
//
// The following flags can be set in *pdwFlags to enable verification checks
// on the subject certificate context:
// CERT_STORE_SIGNATURE_FLAG - use the public key in the returned
// issuer certificate to verify the
// signature on the subject certificate.
// Note, if pSubjectContext->hCertStore ==
// hCertStore, the store provider might
// be able to eliminate a redo of
// the signature verify.
// CERT_STORE_TIME_VALIDITY_FLAG - get the current time and verify that
// its within the subject certificate's
// validity period
// CERT_STORE_REVOCATION_FLAG - check if the subject certificate is on
// the issuer's revocation list
//
// If an enabled verification check fails, then, its flag is set upon return.
// If CERT_STORE_REVOCATION_FLAG was enabled and the issuer doesn't have a
// CRL in the store, then, CERT_STORE_NO_CRL_FLAG is set in addition to
// the CERT_STORE_REVOCATION_FLAG.
//
// If CERT_STORE_SIGNATURE_FLAG or CERT_STORE_REVOCATION_FLAG is set, then,
// CERT_STORE_NO_ISSUER_FLAG is set if it doesn't have an issuer certificate
// in the store.
//
// For a verification check failure, a pointer to the issuer's CERT_CONTEXT
// is still returned and SetLastError isn't updated.
//--------------------------------------------------------------------------
function CertGetIssuerCertificateFromStore(hCertStore: HCERTSTORE;
pSubjectContext, pPrevIssuerContext: PCCERT_CONTEXT; var pdwFlags: DWORD): PCCERT_CONTEXT; stdcall;
{$EXTERNALSYM CertGetIssuerCertificateFromStore}
//+-------------------------------------------------------------------------
// Perform the enabled verification checks on the subject certificate
// using the issuer. Same checks and flags definitions as for the above
// CertGetIssuerCertificateFromStore.
//
// If you are only checking CERT_STORE_TIME_VALIDITY_FLAG, then, the
// issuer can be NULL.
//
// For a verification check failure, SUCCESS is still returned.
//--------------------------------------------------------------------------
function CertVerifySubjectCertificateContext(pSubject: PCCERT_CONTEXT;
pIssuer: PCCERT_CONTEXT; var pdwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM CertVerifySubjectCertificateContext}
//+-------------------------------------------------------------------------
// Duplicate a certificate context
//--------------------------------------------------------------------------
function CertDuplicateCertificateContext(pCertContext: PCCERT_CONTEXT): PCCERT_CONTEXT; stdcall;
{$EXTERNALSYM CertDuplicateCertificateContext}
//+-------------------------------------------------------------------------
// Create a certificate context from the encoded certificate. The created
// context isn't put in a store.
//
// Makes a copy of the encoded certificate in the created context.
//
// If unable to decode and create the certificate context, NULL is returned.
// Otherwise, a pointer to a read only CERT_CONTEXT is returned.
// CERT_CONTEXT must be freed by calling CertFreeCertificateContext.
// CertDuplicateCertificateContext can be called to make a duplicate.
//
// CertSetCertificateContextProperty and CertGetCertificateContextProperty can be called
// to store properties for the certificate.
//--------------------------------------------------------------------------
function CertCreateCertificateContext(dwCertEncodingType: DWORD;
pbCertEncoded: LPBYTE; cbCertEncoded: DWORD): PCCERT_CONTEXT; stdcall;
{$EXTERNALSYM CertCreateCertificateContext}
//+-------------------------------------------------------------------------
// Free a certificate context
//
// There needs to be a corresponding free for each context obtained by a
// get, find, duplicate or create.
//--------------------------------------------------------------------------
function CertFreeCertificateContext(pCertContext: PCCERT_CONTEXT): BOOL; stdcall;
{$EXTERNALSYM CertFreeCertificateContext}
//+-------------------------------------------------------------------------
// Set the property for the specified certificate context.
//
// The type definition for pvData depends on the dwPropId value. There are
// five predefined types:
// CERT_KEY_PROV_HANDLE_PROP_ID - a HCRYPTPROV for the certificate's
// private key is passed in pvData. Updates the hCryptProv field
// of the CERT_KEY_CONTEXT_PROP_ID. If the CERT_KEY_CONTEXT_PROP_ID
// doesn't exist, its created with all the other fields zeroed out. If
// CERT_STORE_NO_CRYPT_RELEASE_FLAG isn't set, HCRYPTPROV is implicitly
// released when either the property is set to NULL or on the final
// free of the CertContext.
//
// CERT_KEY_PROV_INFO_PROP_ID - a PCRYPT_KEY_PROV_INFO for the certificate's
// private key is passed in pvData.
//
// CERT_SHA1_HASH_PROP_ID -
// CERT_MD5_HASH_PROP_ID -
// CERT_SIGNATURE_HASH_PROP_ID - normally, a hash property is implicitly
// set by doing a CertGetCertificateContextProperty. pvData points to a
// CRYPT_HASH_BLOB.
//
// CERT_KEY_CONTEXT_PROP_ID - a PCERT_KEY_CONTEXT for the certificate's
// private key is passed in pvData. The CERT_KEY_CONTEXT contains both the
// hCryptProv and dwKeySpec for the private key.
// See the CERT_KEY_PROV_HANDLE_PROP_ID for more information about
// the hCryptProv field and dwFlags settings. Note, more fields may
// be added for this property. The cbSize field value will be adjusted
// accordingly.
//
// CERT_KEY_SPEC_PROP_ID - the dwKeySpec for the private key. pvData
// points to a DWORD containing the KeySpec
//
// CERT_ENHKEY_USAGE_PROP_ID - enhanced key usage definition for the
// certificate. pvData points to a CRYPT_DATA_BLOB containing an
// ASN.1 encoded CERT_ENHKEY_USAGE (encoded via
// CryptEncodeObject(X509_ENHANCED_KEY_USAGE).
//
// CERT_NEXT_UPDATE_LOCATION_PROP_ID - location of the next update.
// Currently only applicable to CTLs. pvData points to a CRYPT_DATA_BLOB
// containing an ASN.1 encoded CERT_ALT_NAME_INFO (encoded via
// CryptEncodeObject(X509_ALTERNATE_NAME)).
//
// CERT_FRIENDLY_NAME_PROP_ID - friendly name for the cert, CRL or CTL.
// pvData points to a CRYPT_DATA_BLOB. pbData is a pointer to a NULL
// terminated unicode, wide character string.
// cbData = (wcslen((LPWSTR) pbData) + 1) * sizeof(WCHAR).
//
// CERT_DESCRIPTION_PROP_ID - description for the cert, CRL or CTL.
// pvData points to a CRYPT_DATA_BLOB. pbData is a pointer to a NULL
// terminated unicode, wide character string.
// cbData = (wcslen((LPWSTR) pbData) + 1) * sizeof(WCHAR).
//
// CERT_ARCHIVED_PROP_ID - when this property is set, the certificate
// is skipped during enumeration. Note, certificates having this property
// are still found for explicit finds, such as, finding a certificate
// with a specific hash or finding a certificate having a specific issuer
// and serial number. pvData points to a CRYPT_DATA_BLOB. This blob
// can be NULL (pbData = NULL, cbData = 0).
//
// CERT_PUBKEY_ALG_PARA_PROP_ID - for public keys supporting
// algorithm parameter inheritance. pvData points to a CRYPT_OBJID_BLOB
// containing the ASN.1 encoded PublicKey Algorithm Parameters. For
// DSS this would be the parameters encoded via
// CryptEncodeObject(X509_DSS_PARAMETERS). This property may be set
// by CryptVerifyCertificateSignatureEx().
//
// For all the other PROP_IDs: an encoded PCRYPT_DATA_BLOB is passed in pvData.
//
// If the property already exists, then, the old value is deleted and silently
// replaced. Setting, pvData to NULL, deletes the property.
//
// CERT_SET_PROPERTY_IGNORE_PERSIST_ERROR_FLAG can be set to ignore any
// provider write errors and always update the cached context's property.
//--------------------------------------------------------------------------
function CertSetCertificateContextProperty(pCertContext: PCCERT_CONTEXT;
dwPropId: DWORD; dwFlags: DWORD; pvData: Pointer): BOOL; stdcall;
{$EXTERNALSYM CertSetCertificateContextProperty}
// Set this flag to ignore any store provider write errors and always update
// the cached context's property
const
CERT_SET_PROPERTY_IGNORE_PERSIST_ERROR_FLAG = DWORD($80000000);
{$EXTERNALSYM CERT_SET_PROPERTY_IGNORE_PERSIST_ERROR_FLAG}
//+-------------------------------------------------------------------------
// Get the property for the specified certificate context.
//
// For CERT_KEY_PROV_HANDLE_PROP_ID, pvData points to a HCRYPTPROV.
//
// For CERT_KEY_PROV_INFO_PROP_ID, pvData points to a CRYPT_KEY_PROV_INFO structure.
// Elements pointed to by fields in the pvData structure follow the
// structure. Therefore, *pcbData may exceed the size of the structure.
//
// For CERT_KEY_CONTEXT_PROP_ID, pvData points to a CERT_KEY_CONTEXT structure.
//
// For CERT_KEY_SPEC_PROP_ID, pvData points to a DWORD containing the KeySpec.
// If the CERT_KEY_CONTEXT_PROP_ID exists, the KeySpec is obtained from there.
// Otherwise, if the CERT_KEY_PROV_INFO_PROP_ID exists, its the source
// of the KeySpec.
//
// For CERT_SHA1_HASH_PROP_ID or CERT_MD5_HASH_PROP_ID, if the hash
// doesn't already exist, then, its computed via CryptHashCertificate()
// and then set. pvData points to the computed hash. Normally, the length
// is 20 bytes for SHA and 16 for MD5.
//
// For CERT_SIGNATURE_HASH_PROP_ID, if the hash
// doesn't already exist, then, its computed via CryptHashToBeSigned()
// and then set. pvData points to the computed hash. Normally, the length
// is 20 bytes for SHA and 16 for MD5.
//
// For CERT_ACCESS_STATE_PROP_ID, pvData points to a DWORD containing the
// access state flags. The appropriate CERT_ACCESS_STATE_*_FLAG's are set
// in the returned DWORD. See the CERT_ACCESS_STATE_*_FLAG definitions
// above. Note, this property is read only. It can't be set.
//
// For CERT_KEY_IDENTIFIER_PROP_ID, if property doesn't already exist,
// first searches for the szOID_SUBJECT_KEY_IDENTIFIER extension. Next,
// does SHA1 hash of the certficate's SubjectPublicKeyInfo. pvData
// points to the key identifier bytes. Normally, the length is 20 bytes.
//
// For CERT_PUBKEY_ALG_PARA_PROP_ID, pvPara points to the ASN.1 encoded
// PublicKey Algorithm Parameters. This property will only be set
// for public keys supporting algorithm parameter inheritance and when the
// parameters have been omitted from the encoded and signed certificate.
//
// For all other PROP_IDs, pvData points to an encoded array of bytes.
//--------------------------------------------------------------------------
function CertGetCertificateContextProperty(pCertContext: PCCERT_CONTEXT;
dwPropId: DWORD; pvData: Pointer; var pcbData: DWORD): BOOL; stdcall;
{$EXTERNALSYM CertGetCertificateContextProperty}
//+-------------------------------------------------------------------------
// Enumerate the properties for the specified certificate context.
//
// To get the first property, set dwPropId to 0. The ID of the first
// property is returned. To get the next property, set dwPropId to the
// ID returned by the last call. To enumerate all the properties continue
// until 0 is returned.
//
// CertGetCertificateContextProperty is called to get the property's data.
//
// Note, since, the CERT_KEY_PROV_HANDLE_PROP_ID and CERT_KEY_SPEC_PROP_ID
// properties are stored as fields in the CERT_KEY_CONTEXT_PROP_ID
// property, they aren't enumerated individually.
//--------------------------------------------------------------------------
function CertEnumCertificateContextProperties(pCertContext: PCCERT_CONTEXT;
dwPropId: DWORD): DWORD; stdcall;
{$EXTERNALSYM CertEnumCertificateContextProperties}
//+-------------------------------------------------------------------------
// Get the first or next CRL context from the store for the specified
// issuer certificate. Perform the enabled verification checks on the CRL.
//
// If the first or next CRL isn't found, NULL is returned.
// Otherwise, a pointer to a read only CRL_CONTEXT is returned. CRL_CONTEXT
// must be freed by calling CertFreeCRLContext. However, the free must be
// pPrevCrlContext on a subsequent call. CertDuplicateCRLContext
// can be called to make a duplicate.
//
// The pIssuerContext may have been obtained from this store, another store
// or created by the caller application. When created by the caller, the
// CertCreateCertificateContext function must have been called.
//
// If pIssuerContext == NULL, finds all the CRLs in the store.
//
// An issuer may have multiple CRLs. For example, it generates delta CRLs
// using a X.509 v3 extension. pPrevCrlContext MUST BE NULL on the first
// call to get the CRL. To get the next CRL for the issuer, the
// pPrevCrlContext is set to the CRL_CONTEXT returned by a previous call.
//
// NOTE: a NON-NULL pPrevCrlContext is always CertFreeCRLContext'ed by
// this function, even for an error.
//
// The following flags can be set in *pdwFlags to enable verification checks
// on the returned CRL:
// CERT_STORE_SIGNATURE_FLAG - use the public key in the
// issuer's certificate to verify the
// signature on the returned CRL.
// Note, if pIssuerContext->hCertStore ==
// hCertStore, the store provider might
// be able to eliminate a redo of
// the signature verify.
// CERT_STORE_TIME_VALIDITY_FLAG - get the current time and verify that
// its within the CRL's ThisUpdate and
// NextUpdate validity period.
//
// If an enabled verification check fails, then, its flag is set upon return.
//
// If pIssuerContext == NULL, then, an enabled CERT_STORE_SIGNATURE_FLAG
// always fails and the CERT_STORE_NO_ISSUER_FLAG is also set.
//
// For a verification check failure, a pointer to the first or next
// CRL_CONTEXT is still returned and SetLastError isn't updated.
//--------------------------------------------------------------------------
function CertGetCRLFromStore(hCertStore: HCERTSTORE; pIssuerContext: PCCERT_CONTEXT;
pPrevCrlContext: PCCRL_CONTEXT; var pdwFlags: DWORD): PCCRL_CONTEXT; stdcall;
{$EXTERNALSYM CertGetCRLFromStore}
//+-------------------------------------------------------------------------
// Enumerate the CRL contexts in the store.
//
// If a CRL isn't found, NULL is returned.
// Otherwise, a pointer to a read only CRL_CONTEXT is returned. CRL_CONTEXT
// must be freed by calling CertFreeCRLContext or is freed when passed as the
// pPrevCrlContext on a subsequent call. CertDuplicateCRLContext
// can be called to make a duplicate.
//
// pPrevCrlContext MUST BE NULL to enumerate the first
// CRL in the store. Successive CRLs are enumerated by setting
// pPrevCrlContext to the CRL_CONTEXT returned by a previous call.
//
// NOTE: a NON-NULL pPrevCrlContext is always CertFreeCRLContext'ed by
// this function, even for an error.
//--------------------------------------------------------------------------
function CertEnumCRLsInStore(hCertStore: HCERTSTORE;
pPrevCrlContext: PCCRL_CONTEXT): PCCRL_CONTEXT; stdcall;
{$EXTERNALSYM CertEnumCRLsInStore}
//+-------------------------------------------------------------------------
// Find the first or next CRL context in the store.
//
// The CRL is found according to the dwFindType and its pvFindPara.
// See below for a list of the find types and its parameters.
//
// Currently dwFindFlags isn't used and must be set to 0.
//
// Usage of dwCertEncodingType depends on the dwFindType.
//
// If the first or next CRL isn't found, NULL is returned.
// Otherwise, a pointer to a read only CRL_CONTEXT is returned. CRL_CONTEXT
// must be freed by calling CertFreeCRLContext or is freed when passed as the
// pPrevCrlContext on a subsequent call. CertDuplicateCRLContext
// can be called to make a duplicate.
//
// pPrevCrlContext MUST BE NULL on the first
// call to find the CRL. To find the next CRL, the
// pPrevCrlContext is set to the CRL_CONTEXT returned by a previous call.
//
// NOTE: a NON-NULL pPrevCrlContext is always CertFreeCRLContext'ed by
// this function, even for an error.
//--------------------------------------------------------------------------
function CertFindCRLInStore(hCertStore: HCERTSTORE; dwCertEncodingType: DWORD;
dwFindFlags: DWORD; dwFindType: DWORD; pvFindPara: Pointer;
pPrevCrlContext: PCCRL_CONTEXT): PCCRL_CONTEXT; stdcall;
{$EXTERNALSYM CertFindCRLInStore}
const
CRL_FIND_ANY = 0;
{$EXTERNALSYM CRL_FIND_ANY}
CRL_FIND_ISSUED_BY = 1;
{$EXTERNALSYM CRL_FIND_ISSUED_BY}
CRL_FIND_EXISTING = 2;
{$EXTERNALSYM CRL_FIND_EXISTING}
//+-------------------------------------------------------------------------
// CRL_FIND_ANY
//
// Find any CRL.
//
// pvFindPara isn't used.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CRL_FIND_ISSUED_BY
//
// Find CRL matching the specified issuer.
//
// pvFindPara is the PCCERT_CONTEXT of the CRL issuer.
//
// By default, only does issuer name matching. The following flags can be
// set in dwFindFlags to do additional filtering.
//
// If CRL_FIND_ISSUED_BY_AKI_FLAG is set in dwFindFlags, then, checks if the
// CRL has an Authority Key Identifier (AKI) extension. If the CRL has an
// AKI, then, only returns a CRL whose AKI matches the issuer.
//
// Note, the AKI extension has the following OID:
// szOID_AUTHORITY_KEY_IDENTIFIER2 and its corresponding data structure.
//
// If CRL_FIND_ISSUED_BY_SIGNATURE_FLAG is set in dwFindFlags, then,
// uses the public key in the issuer's certificate to verify the
// signature on the CRL. Only returns a CRL having a valid signature.
//--------------------------------------------------------------------------
const
CRL_FIND_ISSUED_BY_AKI_FLAG = $1;
{$EXTERNALSYM CRL_FIND_ISSUED_BY_AKI_FLAG}
CRL_FIND_ISSUED_BY_SIGNATURE_FLAG = $2;
{$EXTERNALSYM CRL_FIND_ISSUED_BY_SIGNATURE_FLAG}
//+-------------------------------------------------------------------------
// CRL_FIND_EXISTING
//
// Find existing CRL in the store.
//
// pvFindPara is the PCCRL_CONTEXT of the CRL to check if it already
// exists in the store.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// Duplicate a CRL context
//--------------------------------------------------------------------------
function CertDuplicateCRLContext(pCrlContext: PCCRL_CONTEXT): PCCRL_CONTEXT; stdcall;
{$EXTERNALSYM CertDuplicateCRLContext}
//+-------------------------------------------------------------------------
// Create a CRL context from the encoded CRL. The created
// context isn't put in a store.
//
// Makes a copy of the encoded CRL in the created context.
//
// If unable to decode and create the CRL context, NULL is returned.
// Otherwise, a pointer to a read only CRL_CONTEXT is returned.
// CRL_CONTEXT must be freed by calling CertFreeCRLContext.
// CertDuplicateCRLContext can be called to make a duplicate.
//
// CertSetCRLContextProperty and CertGetCRLContextProperty can be called
// to store properties for the CRL.
//--------------------------------------------------------------------------
function CertCreateCRLContext(dwCertEncodingType: DWORD; pbCrlEncoded: LPBYTE;
cbCrlEncoded: DWORD): PCCRL_CONTEXT; stdcall;
{$EXTERNALSYM CertCreateCRLContext}
//+-------------------------------------------------------------------------
// Free a CRL context
//
// There needs to be a corresponding free for each context obtained by a
// get, duplicate or create.
//--------------------------------------------------------------------------
function CertFreeCRLContext(pCrlContext: PCCRL_CONTEXT): BOOL; stdcall;
{$EXTERNALSYM CertFreeCRLContext}
//+-------------------------------------------------------------------------
// Set the property for the specified CRL context.
//
// Same Property Ids and semantics as CertSetCertificateContextProperty.
//--------------------------------------------------------------------------
function CertSetCRLContextProperty(pCrlContext: PCCRL_CONTEXT; dwPropId: DWORD;
dwFlags: DWORD; pvData: Pointer): BOOL; stdcall;
{$EXTERNALSYM CertSetCRLContextProperty}
//+-------------------------------------------------------------------------
// Get the property for the specified CRL context.
//
// Same Property Ids and semantics as CertGetCertificateContextProperty.
//
// CERT_SHA1_HASH_PROP_ID, CERT_MD5_HASH_PROP_ID or
// CERT_SIGNATURE_HASH_PROP_ID is the predefined property of most interest.
//--------------------------------------------------------------------------
function CertGetCRLContextProperty(pCrlContext: PCCRL_CONTEXT; dwPropId: DWORD;
pvData: Pointer; var pcbData: DWORD): BOOL; stdcall;
{$EXTERNALSYM CertGetCRLContextProperty}
//+-------------------------------------------------------------------------
// Enumerate the properties for the specified CRL context.
//
// To get the first property, set dwPropId to 0. The ID of the first
// property is returned. To get the next property, set dwPropId to the
// ID returned by the last call. To enumerate all the properties continue
// until 0 is returned.
//
// CertGetCRLContextProperty is called to get the property's data.
//--------------------------------------------------------------------------
function CertEnumCRLContextProperties(pCrlContext: PCCRL_CONTEXT;
dwPropId: DWORD): DWORD; stdcall;
{$EXTERNALSYM CertEnumCRLContextProperties}
//+-------------------------------------------------------------------------
// Search the CRL's list of entries for the specified certificate.
//
// TRUE is returned if we were able to search the list. Otherwise, FALSE is
// returned,
//
// For success, if the certificate was found in the list, *ppCrlEntry is
// updated with a pointer to the entry. Otherwise, *ppCrlEntry is set to NULL.
// The returned entry isn't allocated and must not be freed.
//
// dwFlags and pvReserved currently aren't used and must be set to 0 or NULL.
//--------------------------------------------------------------------------
function CertFindCertificateInCRL(pCert: PCCERT_CONTEXT; pCrlContext: PCCRL_CONTEXT;
dwFlags: DWORD; pvReserved: Pointer; var ppCrlEntry: PCRL_ENTRY): BOOL; stdcall;
{$EXTERNALSYM CertFindCertificateInCRL}
//+-------------------------------------------------------------------------
// Add certificate/CRL, encoded, context or element disposition values.
//--------------------------------------------------------------------------
const
CERT_STORE_ADD_NEW = 1;
{$EXTERNALSYM CERT_STORE_ADD_NEW}
CERT_STORE_ADD_USE_EXISTING = 2;
{$EXTERNALSYM CERT_STORE_ADD_USE_EXISTING}
CERT_STORE_ADD_REPLACE_EXISTING = 3;
{$EXTERNALSYM CERT_STORE_ADD_REPLACE_EXISTING}
CERT_STORE_ADD_ALWAYS = 4;
{$EXTERNALSYM CERT_STORE_ADD_ALWAYS}
CERT_STORE_ADD_REPLACE_EXISTING_INHERIT_PROPERTIES = 5;
{$EXTERNALSYM CERT_STORE_ADD_REPLACE_EXISTING_INHERIT_PROPERTIES}
CERT_STORE_ADD_NEWER = 6;
{$EXTERNALSYM CERT_STORE_ADD_NEWER}
CERT_STORE_ADD_NEWER_INHERIT_PROPERTIES = 7;
{$EXTERNALSYM CERT_STORE_ADD_NEWER_INHERIT_PROPERTIES}
//+-------------------------------------------------------------------------
// Add the encoded certificate to the store according to the specified
// disposition action.
//
// Makes a copy of the encoded certificate before adding to the store.
//
// dwAddDispostion specifies the action to take if the certificate
// already exists in the store. This parameter must be one of the following
// values:
// CERT_STORE_ADD_NEW
// Fails if the certificate already exists in the store. LastError
// is set to CRYPT_E_EXISTS.
// CERT_STORE_ADD_USE_EXISTING
// If the certifcate already exists, then, its used and if ppCertContext
// is non-NULL, the existing context is duplicated.
// CERT_STORE_ADD_REPLACE_EXISTING
// If the certificate already exists, then, the existing certificate
// context is deleted before creating and adding the new context.
// CERT_STORE_ADD_ALWAYS
// No check is made to see if the certificate already exists. A
// new certificate context is always created. This may lead to
// duplicates in the store.
// CERT_STORE_ADD_REPLACE_EXISTING_INHERIT_PROPERTIES
// If the certificate already exists, then, its used.
// CERT_STORE_ADD_NEWER
// Fails if the certificate already exists in the store AND the NotBefore
// time of the existing certificate is equal to or greater than the
// NotBefore time of the new certificate being added. LastError
// is set to CRYPT_E_EXISTS.
//
// If an older certificate is replaced, same as
// CERT_STORE_ADD_REPLACE_EXISTING.
//
// For CRLs or CTLs compares the ThisUpdate times.
//
// CERT_STORE_ADD_NEWER_INHERIT_PROPERTIES
// Same as CERT_STORE_ADD_NEWER. However, if an older certificate is
// replaced, same as CERT_STORE_ADD_REPLACE_EXISTING_INHERIT_PROPERTIES.
//
// CertGetSubjectCertificateFromStore is called to determine if the
// certificate already exists in the store.
//
// ppCertContext can be NULL, indicating the caller isn't interested
// in getting the CERT_CONTEXT of the added or existing certificate.
//--------------------------------------------------------------------------
function CertAddEncodedCertificateToStore(hCertStore: HCERTSTORE;
dwCertEncodingType: DWORD; pbCertEncoded: LPBYTE; cbCertEncoded: DWORD;
dwAddDisposition: DWORD; ppCertContext: PPCCERT_CONTEXT): BOOL; stdcall;
{$EXTERNALSYM CertAddEncodedCertificateToStore}
//+-------------------------------------------------------------------------
// Add the certificate context to the store according to the specified
// disposition action.
//
// In addition to the encoded certificate, the context's properties are
// also copied. Note, the CERT_KEY_CONTEXT_PROP_ID property (and its
// CERT_KEY_PROV_HANDLE_PROP_ID or CERT_KEY_SPEC_PROP_ID) isn't copied.
//
// Makes a copy of the certificate context before adding to the store.
//
// dwAddDispostion specifies the action to take if the certificate
// already exists in the store. This parameter must be one of the following
// values:
// CERT_STORE_ADD_NEW
// Fails if the certificate already exists in the store. LastError
// is set to CRYPT_E_EXISTS.
// CERT_STORE_ADD_USE_EXISTING
// If the certifcate already exists, then, its used and if ppStoreContext
// is non-NULL, the existing context is duplicated. Iterates
// through pCertContext's properties and only copies the properties
// that don't already exist. The SHA1 and MD5 hash properties aren't
// copied.
// CERT_STORE_ADD_REPLACE_EXISTING
// If the certificate already exists, then, the existing certificate
// context is deleted before creating and adding a new context.
// Properties are copied before doing the add.
// CERT_STORE_ADD_ALWAYS
// No check is made to see if the certificate already exists. A
// new certificate context is always created and added. This may lead to
// duplicates in the store. Properties are
// copied before doing the add.
// CERT_STORE_ADD_REPLACE_EXISTING_INHERIT_PROPERTIES
// If the certificate already exists, then, the existing certificate
// context is used. Properties from the added context are copied and
// replace existing properties. However, any existing properties not
// in the added context remain and aren't deleted.
// CERT_STORE_ADD_NEWER
// Fails if the certificate already exists in the store AND the NotBefore
// time of the existing context is equal to or greater than the
// NotBefore time of the new context being added. LastError
// is set to CRYPT_E_EXISTS.
//
// If an older context is replaced, same as
// CERT_STORE_ADD_REPLACE_EXISTING.
//
// For CRLs or CTLs compares the ThisUpdate times.
//
// CERT_STORE_ADD_NEWER_INHERIT_PROPERTIES
// Same as CERT_STORE_ADD_NEWER. However, if an older context is
// replaced, same as CERT_STORE_ADD_REPLACE_EXISTING_INHERIT_PROPERTIES.
//
// CertGetSubjectCertificateFromStore is called to determine if the
// certificate already exists in the store.
//
// ppStoreContext can be NULL, indicating the caller isn't interested
// in getting the CERT_CONTEXT of the added or existing certificate.
//--------------------------------------------------------------------------
function CertAddCertificateContextToStore(hCertStore: HCERTSTORE;
pCertContext: PCCERT_CONTEXT; dwAddDisposition: DWORD;
ppStoreContext: PPCCERT_CONTEXT): BOOL; stdcall;
{$EXTERNALSYM CertAddCertificateContextToStore}
//+-------------------------------------------------------------------------
// Certificate Store Context Types
//--------------------------------------------------------------------------
const
CERT_STORE_CERTIFICATE_CONTEXT = 1;
{$EXTERNALSYM CERT_STORE_CERTIFICATE_CONTEXT}
CERT_STORE_CRL_CONTEXT = 2;
{$EXTERNALSYM CERT_STORE_CRL_CONTEXT}
CERT_STORE_CTL_CONTEXT = 3;
{$EXTERNALSYM CERT_STORE_CTL_CONTEXT}
//+-------------------------------------------------------------------------
// Certificate Store Context Bit Flags
//--------------------------------------------------------------------------
CERT_STORE_ALL_CONTEXT_FLAG = not 0;
{$EXTERNALSYM CERT_STORE_ALL_CONTEXT_FLAG}
CERT_STORE_CERTIFICATE_CONTEXT_FLAG = 1 shl CERT_STORE_CERTIFICATE_CONTEXT;
{$EXTERNALSYM CERT_STORE_CERTIFICATE_CONTEXT_FLAG}
CERT_STORE_CRL_CONTEXT_FLAG = 1 shl CERT_STORE_CRL_CONTEXT;
{$EXTERNALSYM CERT_STORE_CRL_CONTEXT_FLAG}
CERT_STORE_CTL_CONTEXT_FLAG = 1 shl CERT_STORE_CTL_CONTEXT;
{$EXTERNALSYM CERT_STORE_CTL_CONTEXT_FLAG}
//+-------------------------------------------------------------------------
// Add the serialized certificate or CRL element to the store.
//
// The serialized element contains the encoded certificate, CRL or CTL and
// its properties, such as, CERT_KEY_PROV_INFO_PROP_ID.
//
// If hCertStore is NULL, creates a certificate, CRL or CTL context not
// residing in any store.
//
// dwAddDispostion specifies the action to take if the certificate or CRL
// already exists in the store. See CertAddCertificateContextToStore for a
// list of and actions taken.
//
// dwFlags currently isn't used and should be set to 0.
//
// dwContextTypeFlags specifies the set of allowable contexts. For example, to
// add either a certificate or CRL, set dwContextTypeFlags to:
// CERT_STORE_CERTIFICATE_CONTEXT_FLAG | CERT_STORE_CRL_CONTEXT_FLAG
//
// *pdwContextType is updated with the type of the context returned in
// *ppvContxt. pdwContextType or ppvContext can be NULL, indicating the
// caller isn't interested in getting the output. If *ppvContext is
// returned it must be freed by calling CertFreeCertificateContext or
// CertFreeCRLContext.
//--------------------------------------------------------------------------
function CertAddSerializedElementToStore(hCertStore: HCERTSTORE; pbElement: LPBYTE;
cbElement, dwAddDisposition, dwFlags, dwContextTypeFlags: DWORD;
pdwContextType: LPDWORD; ppvContext: PPointer): BOOL; stdcall;
{$EXTERNALSYM CertAddSerializedElementToStore}
//+-------------------------------------------------------------------------
// Delete the specified certificate from the store.
//
// All subsequent gets or finds for the certificate will fail. However,
// memory allocated for the certificate isn't freed until all of its contexts
// have also been freed.
//
// The pCertContext is obtained from a get, enum, find or duplicate.
//
// Some store provider implementations might also delete the issuer's CRLs
// if this is the last certificate for the issuer in the store.
//
// NOTE: the pCertContext is always CertFreeCertificateContext'ed by
// this function, even for an error.
//--------------------------------------------------------------------------
function CertDeleteCertificateFromStore(pCertContext: PCCERT_CONTEXT): BOOL; stdcall;
{$EXTERNALSYM CertDeleteCertificateFromStore}
//+-------------------------------------------------------------------------
// Add the encoded CRL to the store according to the specified
// disposition option.
//
// Makes a copy of the encoded CRL before adding to the store.
//
// dwAddDispostion specifies the action to take if the CRL
// already exists in the store. See CertAddEncodedCertificateToStore for a
// list of and actions taken.
//
// Compares the CRL's Issuer to determine if the CRL already exists in the
// store.
//
// ppCrlContext can be NULL, indicating the caller isn't interested
// in getting the CRL_CONTEXT of the added or existing CRL.
//--------------------------------------------------------------------------
function CertAddEncodedCRLToStore(hCertStore: HCERTSTORE; dwCertEncodingType: DWORD;
pbCrlEncoded: LPBYTE; cbCrlEncoded, dwAddDisposition: DWORD;
ppCrlContext: PPCCRL_CONTEXT): BOOL; stdcall;
{$EXTERNALSYM CertAddEncodedCRLToStore}
//+-------------------------------------------------------------------------
// Add the CRL context to the store according to the specified
// disposition option.
//
// In addition to the encoded CRL, the context's properties are
// also copied. Note, the CERT_KEY_CONTEXT_PROP_ID property (and its
// CERT_KEY_PROV_HANDLE_PROP_ID or CERT_KEY_SPEC_PROP_ID) isn't copied.
//
// Makes a copy of the encoded CRL before adding to the store.
//
// dwAddDispostion specifies the action to take if the CRL
// already exists in the store. See CertAddCertificateContextToStore for a
// list of and actions taken.
//
// Compares the CRL's Issuer, ThisUpdate and NextUpdate to determine
// if the CRL already exists in the store.
//
// ppStoreContext can be NULL, indicating the caller isn't interested
// in getting the CRL_CONTEXT of the added or existing CRL.
//--------------------------------------------------------------------------
function CertAddCRLContextToStore(hCertStore: HCERTSTORE; pCrlContext: PCCRL_CONTEXT;
dwAddDisposition: DWORD; ppStoreContext: PPCCRL_CONTEXT): BOOL; stdcall;
{$EXTERNALSYM CertAddCRLContextToStore}
//+-------------------------------------------------------------------------
// Delete the specified CRL from the store.
//
// All subsequent gets for the CRL will fail. However,
// memory allocated for the CRL isn't freed until all of its contexts
// have also been freed.
//
// The pCrlContext is obtained from a get or duplicate.
//
// NOTE: the pCrlContext is always CertFreeCRLContext'ed by
// this function, even for an error.
//--------------------------------------------------------------------------
function CertDeleteCRLFromStore(pCrlContext: PCCRL_CONTEXT): BOOL; stdcall;
{$EXTERNALSYM CertDeleteCRLFromStore}
//+-------------------------------------------------------------------------
// Serialize the certificate context's encoded certificate and its
// properties.
//--------------------------------------------------------------------------
function CertSerializeCertificateStoreElement(pCertContext: PCCERT_CONTEXT;
dwFlags: DWORD; pbElement: LPBYTE; var pcbElement: DWORD): BOOL; stdcall;
{$EXTERNALSYM CertSerializeCertificateStoreElement}
//+-------------------------------------------------------------------------
// Serialize the CRL context's encoded CRL and its properties.
//--------------------------------------------------------------------------
function CertSerializeCRLStoreElement(pCrlContext: PCCRL_CONTEXT; dwFlags: DWORD;
pbElement: LPBYTE; var pcbElement: DWORD): BOOL; stdcall;
{$EXTERNALSYM CertSerializeCRLStoreElement}
//+=========================================================================
// Certificate Trust List (CTL) Store Data Structures and APIs
//==========================================================================
//+-------------------------------------------------------------------------
// Duplicate a CTL context
//--------------------------------------------------------------------------
function CertDuplicateCTLContext(pCtlContext: PCCTL_CONTEXT): PCCTL_CONTEXT; stdcall;
{$EXTERNALSYM CertDuplicateCTLContext}
//+-------------------------------------------------------------------------
// Create a CTL context from the encoded CTL. The created
// context isn't put in a store.
//
// Makes a copy of the encoded CTL in the created context.
//
// If unable to decode and create the CTL context, NULL is returned.
// Otherwise, a pointer to a read only CTL_CONTEXT is returned.
// CTL_CONTEXT must be freed by calling CertFreeCTLContext.
// CertDuplicateCTLContext can be called to make a duplicate.
//
// CertSetCTLContextProperty and CertGetCTLContextProperty can be called
// to store properties for the CTL.
//--------------------------------------------------------------------------
function CertCreateCTLContext(dwMsgAndCertEncodingType: DWORD;
pbCtlEncoded: LPBYTE; cbCtlEncoded: DWORD): PCCTL_CONTEXT; stdcall;
{$EXTERNALSYM CertCreateCTLContext}
//+-------------------------------------------------------------------------
// Free a CTL context
//
// There needs to be a corresponding free for each context obtained by a
// get, duplicate or create.
//--------------------------------------------------------------------------
function CertFreeCTLContext(pCtlContext: PCCTL_CONTEXT): BOOL; stdcall;
{$EXTERNALSYM CertFreeCTLContext}
//+-------------------------------------------------------------------------
// Set the property for the specified CTL context.
//
// Same Property Ids and semantics as CertSetCertificateContextProperty.
//--------------------------------------------------------------------------
function CertSetCTLContextProperty(pCtlContext: PCCTL_CONTEXT; dwPropId: DWORD;
dwFlags: DWORD; pvData: Pointer): BOOL; stdcall;
{$EXTERNALSYM CertSetCTLContextProperty}
//+-------------------------------------------------------------------------
// Get the property for the specified CTL context.
//
// Same Property Ids and semantics as CertGetCertificateContextProperty.
//
// CERT_SHA1_HASH_PROP_ID or CERT_NEXT_UPDATE_LOCATION_PROP_ID are the
// predefined properties of most interest.
//--------------------------------------------------------------------------
function CertGetCTLContextProperty(pCtlContext: PCCTL_CONTEXT; dwPropId: DWORD;
pvData: Pointer; var pcbData: DWORD): BOOL; stdcall;
{$EXTERNALSYM CertGetCTLContextProperty}
//+-------------------------------------------------------------------------
// Enumerate the properties for the specified CTL context.
//--------------------------------------------------------------------------
function CertEnumCTLContextProperties(pCtlContext: PCCTL_CONTEXT; dwPropId: DWORD): DWORD; stdcall;
{$EXTERNALSYM CertEnumCTLContextProperties}
//+-------------------------------------------------------------------------
// Enumerate the CTL contexts in the store.
//
// If a CTL isn't found, NULL is returned.
// Otherwise, a pointer to a read only CTL_CONTEXT is returned. CTL_CONTEXT
// must be freed by calling CertFreeCTLContext or is freed when passed as the
// pPrevCtlContext on a subsequent call. CertDuplicateCTLContext
// can be called to make a duplicate.
//
// pPrevCtlContext MUST BE NULL to enumerate the first
// CTL in the store. Successive CTLs are enumerated by setting
// pPrevCtlContext to the CTL_CONTEXT returned by a previous call.
//
// NOTE: a NON-NULL pPrevCtlContext is always CertFreeCTLContext'ed by
// this function, even for an error.
//--------------------------------------------------------------------------
function CertEnumCTLsInStore(hCertStore: HCERTSTORE; pPrevCtlContext: PCCTL_CONTEXT): PCCTL_CONTEXT; stdcall;
{$EXTERNALSYM CertEnumCTLsInStore}
//+-------------------------------------------------------------------------
// Attempt to find the specified subject in the CTL.
//
// For CTL_CERT_SUBJECT_TYPE, pvSubject points to a CERT_CONTEXT. The CTL's
// SubjectAlgorithm is examined to determine the representation of the
// subject's identity. Initially, only SHA1 or MD5 hash will be supported.
// The appropriate hash property is obtained from the CERT_CONTEXT.
//
// For CTL_ANY_SUBJECT_TYPE, pvSubject points to the CTL_ANY_SUBJECT_INFO
// structure which contains the SubjectAlgorithm to be matched in the CTL
// and the SubjectIdentifer to be matched in one of the CTL entries.
//
// The certificate's hash or the CTL_ANY_SUBJECT_INFO's SubjectIdentifier
// is used as the key in searching the subject entries. A binary
// memory comparison is done between the key and the entry's SubjectIdentifer.
//
// dwEncodingType isn't used for either of the above SubjectTypes.
//--------------------------------------------------------------------------
function CertFindSubjectInCTL(dwEncodingType: DWORD; dwSubjectType: DWORD;
pvSubject: Pointer; pCtlContext: PCCTL_CONTEXT; dwFlags: DWORD): PCTL_ENTRY; stdcall;
{$EXTERNALSYM CertFindSubjectInCTL}
// Subject Types:
// CTL_ANY_SUBJECT_TYPE, pvSubject points to following CTL_ANY_SUBJECT_INFO.
// CTL_CERT_SUBJECT_TYPE, pvSubject points to CERT_CONTEXT.
const
CTL_ANY_SUBJECT_TYPE = 1;
{$EXTERNALSYM CTL_ANY_SUBJECT_TYPE}
CTL_CERT_SUBJECT_TYPE = 2;
{$EXTERNALSYM CTL_CERT_SUBJECT_TYPE}
type
PCTL_ANY_SUBJECT_INFO = ^CTL_ANY_SUBJECT_INFO;
{$EXTERNALSYM PCTL_ANY_SUBJECT_INFO}
_CTL_ANY_SUBJECT_INFO = record
SubjectAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
SubjectIdentifier: CRYPT_DATA_BLOB;
end;
{$EXTERNALSYM _CTL_ANY_SUBJECT_INFO}
CTL_ANY_SUBJECT_INFO = _CTL_ANY_SUBJECT_INFO;
{$EXTERNALSYM CTL_ANY_SUBJECT_INFO}
TCtlAnySubjectInfo = CTL_ANY_SUBJECT_INFO;
PCtlAnySubjectInfo = PCTL_ANY_SUBJECT_INFO;
//+-------------------------------------------------------------------------
// Find the first or next CTL context in the store.
//
// The CTL is found according to the dwFindType and its pvFindPara.
// See below for a list of the find types and its parameters.
//
// Currently dwFindFlags isn't used and must be set to 0.
//
// Usage of dwMsgAndCertEncodingType depends on the dwFindType.
//
// If the first or next CTL isn't found, NULL is returned.
// Otherwise, a pointer to a read only CTL_CONTEXT is returned. CTL_CONTEXT
// must be freed by calling CertFreeCTLContext or is freed when passed as the
// pPrevCtlContext on a subsequent call. CertDuplicateCTLContext
// can be called to make a duplicate.
//
// pPrevCtlContext MUST BE NULL on the first
// call to find the CTL. To find the next CTL, the
// pPrevCtlContext is set to the CTL_CONTEXT returned by a previous call.
//
// NOTE: a NON-NULL pPrevCtlContext is always CertFreeCTLContext'ed by
// this function, even for an error.
//--------------------------------------------------------------------------
function CertFindCTLInStore(hCertStore: HCERTSTORE; dwMsgAndCertEncodingType,
dwFindFlags, dwFindType: DWORD; pvFindPara: Pointer;
pPrevCtlContext: PCCTL_CONTEXT): PCCTL_CONTEXT; stdcall;
{$EXTERNALSYM CertFindCTLInStore}
const
CTL_FIND_ANY = 0;
{$EXTERNALSYM CTL_FIND_ANY}
CTL_FIND_SHA1_HASH = 1;
{$EXTERNALSYM CTL_FIND_SHA1_HASH}
CTL_FIND_MD5_HASH = 2;
{$EXTERNALSYM CTL_FIND_MD5_HASH}
CTL_FIND_USAGE = 3;
{$EXTERNALSYM CTL_FIND_USAGE}
CTL_FIND_SUBJECT = 4;
{$EXTERNALSYM CTL_FIND_SUBJECT}
CTL_FIND_EXISTING = 5;
{$EXTERNALSYM CTL_FIND_EXISTING}
type
PCTL_FIND_USAGE_PARA = ^CTL_FIND_USAGE_PARA;
{$EXTERNALSYM PCTL_FIND_USAGE_PARA}
_CTL_FIND_USAGE_PARA = record
cbSize: DWORD;
SubjectUsage: CTL_USAGE; // optional
ListIdentifier: CRYPT_DATA_BLOB; // optional
pSigner: PCERT_INFO; // optional
end;
{$EXTERNALSYM _CTL_FIND_USAGE_PARA}
CTL_FIND_USAGE_PARA = _CTL_FIND_USAGE_PARA;
{$EXTERNALSYM CTL_FIND_USAGE_PARA}
TCtlFindUsagePara = CTL_FIND_USAGE_PARA;
PCtlFindUsagePara = PCTL_FIND_USAGE_PARA;
const
CTL_FIND_NO_LIST_ID_CBDATA = DWORD($FFFFFFFF);
{$EXTERNALSYM CTL_FIND_NO_LIST_ID_CBDATA}
CTL_FIND_NO_SIGNER_PTR = PCERT_INFO(-1);
{$EXTERNALSYM CTL_FIND_NO_SIGNER_PTR}
CTL_FIND_SAME_USAGE_FLAG = $1;
{$EXTERNALSYM CTL_FIND_SAME_USAGE_FLAG}
type
PCTL_FIND_SUBJECT_PARA = ^CTL_FIND_SUBJECT_PARA;
{$EXTERNALSYM PCTL_FIND_SUBJECT_PARA}
_CTL_FIND_SUBJECT_PARA = record
cbSize: DWORD;
pUsagePara: PCTL_FIND_USAGE_PARA; // optional
dwSubjectType: DWORD;
pvSubject: Pointer;
end;
{$EXTERNALSYM _CTL_FIND_SUBJECT_PARA}
CTL_FIND_SUBJECT_PARA = _CTL_FIND_SUBJECT_PARA;
{$EXTERNALSYM CTL_FIND_SUBJECT_PARA}
TCtlFindSubjectPara = CTL_FIND_SUBJECT_PARA;
PCtlFindSubjectPara = PCTL_FIND_SUBJECT_PARA;
//+-------------------------------------------------------------------------
// CTL_FIND_ANY
//
// Find any CTL.
//
// pvFindPara isn't used.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CTL_FIND_SHA1_HASH
// CTL_FIND_MD5_HASH
//
// Find a CTL with the specified hash.
//
// pvFindPara points to a CRYPT_HASH_BLOB.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CTL_FIND_USAGE
//
// Find a CTL having the specified usage identifiers, list identifier or
// signer. The CertEncodingType of the signer is obtained from the
// dwMsgAndCertEncodingType parameter.
//
// pvFindPara points to a CTL_FIND_USAGE_PARA data structure. The
// SubjectUsage.cUsageIdentifer can be 0 to match any usage. The
// ListIdentifier.cbData can be 0 to match any list identifier. To only match
// CTLs without a ListIdentifier, cbData must be set to
// CTL_FIND_NO_LIST_ID_CBDATA. pSigner can be NULL to match any signer. Only
// the Issuer and SerialNumber fields of the pSigner's PCERT_INFO are used.
// To only match CTLs without a signer, pSigner must be set to
// CTL_FIND_NO_SIGNER_PTR.
//
// The CTL_FIND_SAME_USAGE_FLAG can be set in dwFindFlags to
// only match CTLs with the same usage identifiers. CTLs having additional
// usage identifiers aren't matched. For example, if only "1.2.3" is specified
// in CTL_FIND_USAGE_PARA, then, for a match, the CTL must only contain
// "1.2.3" and not any additional usage identifers.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CTL_FIND_SUBJECT
//
// Find a CTL having the specified subject. CertFindSubjectInCTL can be
// called to get a pointer to the subject's entry in the CTL. pUsagePara can
// optionally be set to enable the above CTL_FIND_USAGE matching.
//
// pvFindPara points to a CTL_FIND_SUBJECT_PARA data structure.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// Add the encoded CTL to the store according to the specified
// disposition option.
//
// Makes a copy of the encoded CTL before adding to the store.
//
// dwAddDispostion specifies the action to take if the CTL
// already exists in the store. See CertAddEncodedCertificateToStore for a
// list of and actions taken.
//
// Compares the CTL's SubjectUsage, ListIdentifier and any of its signers
// to determine if the CTL already exists in the store.
//
// ppCtlContext can be NULL, indicating the caller isn't interested
// in getting the CTL_CONTEXT of the added or existing CTL.
//--------------------------------------------------------------------------
function CertAddEncodedCTLToStore(hCertStore: HCERTSTORE;
dwMsgAndCertEncodingType: DWORD; pbCtlEncoded: LPBYTE; cbCtlEncoded: DWORD;
dwAddDisposition: DWORD; ppCtlContext: PPCCTL_CONTEXT): BOOL; stdcall;
{$EXTERNALSYM CertAddEncodedCTLToStore}
//+-------------------------------------------------------------------------
// Add the CTL context to the store according to the specified
// disposition option.
//
// In addition to the encoded CTL, the context's properties are
// also copied. Note, the CERT_KEY_CONTEXT_PROP_ID property (and its
// CERT_KEY_PROV_HANDLE_PROP_ID or CERT_KEY_SPEC_PROP_ID) isn't copied.
//
// Makes a copy of the encoded CTL before adding to the store.
//
// dwAddDispostion specifies the action to take if the CTL
// already exists in the store. See CertAddCertificateContextToStore for a
// list of and actions taken.
//
// Compares the CTL's SubjectUsage, ListIdentifier and any of its signers
// to determine if the CTL already exists in the store.
//
// ppStoreContext can be NULL, indicating the caller isn't interested
// in getting the CTL_CONTEXT of the added or existing CTL.
//--------------------------------------------------------------------------
function CertAddCTLContextToStore(hCertStore: HCERTSTORE; pCtlContext: PCCTL_CONTEXT;
dwAddDisposition: DWORD; ppStoreContext: PPCCTL_CONTEXT): BOOL; stdcall;
{$EXTERNALSYM CertAddCTLContextToStore}
//+-------------------------------------------------------------------------
// Serialize the CTL context's encoded CTL and its properties.
//--------------------------------------------------------------------------
function CertSerializeCTLStoreElement(pCtlContext: PCCTL_CONTEXT; dwFlags: DWORD;
pbElement: LPBYTE; var pcbElement: DWORD): BOOL; stdcall;
{$EXTERNALSYM CertSerializeCTLStoreElement}
//+-------------------------------------------------------------------------
// Delete the specified CTL from the store.
//
// All subsequent gets for the CTL will fail. However,
// memory allocated for the CTL isn't freed until all of its contexts
// have also been freed.
//
// The pCtlContext is obtained from a get or duplicate.
//
// NOTE: the pCtlContext is always CertFreeCTLContext'ed by
// this function, even for an error.
//--------------------------------------------------------------------------
function CertDeleteCTLFromStore(pCtlContext: PCCTL_CONTEXT): BOOL; stdcall;
{$EXTERNALSYM CertDeleteCTLFromStore}
function CertAddCertificateLinkToStore(hCertStore: HCERTSTORE;
pCertContext: PCCERT_CONTEXT; dwAddDisposition: DWORD;
ppStoreContext: PPCCERT_CONTEXT): BOOL; stdcall;
{$EXTERNALSYM CertAddCertificateLinkToStore}
function CertAddCRLLinkToStore(hCertStore: HCERTSTORE; pCrlContext: PCCRL_CONTEXT;
dwAddDisposition: DWORD; ppStoreContext: PPCCRL_CONTEXT): BOOL; stdcall;
{$EXTERNALSYM CertAddCRLLinkToStore}
function CertAddCTLLinkToStore(hCertStore: HCERTSTORE; pCtlContext: PCCTL_CONTEXT;
dwAddDisposition: DWORD; ppStoreContext: PPCCTL_CONTEXT): BOOL; stdcall;
{$EXTERNALSYM CertAddCTLLinkToStore}
function CertAddStoreToCollection(hCollectionStore: HCERTSTORE;
hSiblingStore: HCERTSTORE; dwUpdateFlags, dwPriority: DWORD): BOOL; stdcall;
{$EXTERNALSYM CertAddStoreToCollection}
procedure CertRemoveStoreFromCollection(hCollectionStore, hSiblingStore: HCERTSTORE); stdcall;
{$EXTERNALSYM CertRemoveStoreFromCollection}
function CertControlStore(hCertStore: HCERTSTORE; dwFlags, dwCtrlType: DWORD;
pvCtrlPara: Pointer): BOOL; stdcall;
{$EXTERNALSYM CertControlStore}
//+-------------------------------------------------------------------------
// Certificate Store control types
//--------------------------------------------------------------------------
const
CERT_STORE_CTRL_RESYNC = 1;
{$EXTERNALSYM CERT_STORE_CTRL_RESYNC}
CERT_STORE_CTRL_NOTIFY_CHANGE = 2;
{$EXTERNALSYM CERT_STORE_CTRL_NOTIFY_CHANGE}
CERT_STORE_CTRL_COMMIT = 3;
{$EXTERNALSYM CERT_STORE_CTRL_COMMIT}
CERT_STORE_CTRL_AUTO_RESYNC = 4;
{$EXTERNALSYM CERT_STORE_CTRL_AUTO_RESYNC}
//+-------------------------------------------------------------------------
// CERT_STORE_CTRL_RESYNC
//
// Re-synchronize the store.
//
// The pvCtrlPara points to the event HANDLE to be signaled on
// the next store change. Normally, this would be the same
// event HANDLE passed to CERT_STORE_CTRL_NOTIFY_CHANGE during initialization.
//
// If pvCtrlPara is NULL, no events are re-armed.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CERT_STORE_CTRL_NOTIFY_CHANGE
//
// Signal the event when the underlying store is changed.
//
// pvCtrlPara points to the event HANDLE to be signaled.
//
// pvCtrlPara can be NULL to inform the store of a subsequent
// CERT_STORE_CTRL_RESYNC and allow it to optimize by only doing a resync
// if the store has changed. For the registry based stores, an internal
// notify change event is created and registered to be signaled.
//
// Recommend calling CERT_STORE_CTRL_NOTIFY_CHANGE once for each event to
// be passed to CERT_STORE_CTRL_RESYNC. This should only happen after
// the event has been created. Not after each time the event is signaled.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CERT_STORE_CTRL_AUTO_RESYNC
//
// At the start of every enumeration or find store API call, check if the
// underlying store has changed. If it has changed, re-synchronize.
//
// This check is only done in the enumeration or find APIs when the
// pPrevContext is NULL.
//
// The pvCtrlPara isn't used and must be set to NULL.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CERT_STORE_CTRL_COMMIT
//
// If any changes have been to the cached store, they are committed to
// persisted storage. If no changes have been made since the store was
// opened or the last commit, this call is ignored. May also be ignored by
// store providers that persist changes immediately.
//
// CERT_STORE_CTRL_COMMIT_FORCE_FLAG can be set to force the store
// to be committed even if it hasn't been touched.
//
// CERT_STORE_CTRL_COMMIT_CLEAR_FLAG can be set to inhibit a commit on
// store close.
//--------------------------------------------------------------------------
const
CERT_STORE_CTRL_COMMIT_FORCE_FLAG = $1;
{$EXTERNALSYM CERT_STORE_CTRL_COMMIT_FORCE_FLAG}
CERT_STORE_CTRL_COMMIT_CLEAR_FLAG = $2;
{$EXTERNALSYM CERT_STORE_CTRL_COMMIT_CLEAR_FLAG}
//+=========================================================================
// Cert Store Property Defines and APIs
//==========================================================================
//+-------------------------------------------------------------------------
// Store property IDs. This is a property applicable to the entire store.
// Its not a property on an individual certificate, CRL or CTL context.
//
// Currently, no store properties are persisted. (This differs from
// most context properties which are persisted.)
//
// See CertSetStoreProperty or CertGetStoreProperty for usage information.
//
// Note, the range for predefined store properties should be outside
// the range of predefined context properties. We will start at 4096.
//--------------------------------------------------------------------------
CERT_STORE_LOCALIZED_NAME_PROP_ID = $1000;
{$EXTERNALSYM CERT_STORE_LOCALIZED_NAME_PROP_ID}
//+-------------------------------------------------------------------------
// Set a store property.
//
// The type definition for pvData depends on the dwPropId value.
// CERT_STORE_LOCALIZED_NAME_PROP_ID - localized name of the store.
// pvData points to a CRYPT_DATA_BLOB. pbData is a pointer to a NULL
// terminated unicode, wide character string.
// cbData = (wcslen((LPWSTR) pbData) + 1) * sizeof(WCHAR).
//
// For all the other PROP_IDs: an encoded PCRYPT_DATA_BLOB is passed in pvData.
//
// If the property already exists, then, the old value is deleted and silently
// replaced. Setting, pvData to NULL, deletes the property.
//--------------------------------------------------------------------------
function CertSetStoreProperty(hCertStore: HCERTSTORE; dwPropId, dwFlags: DWORD;
pvData: Pointer): BOOL; stdcall;
{$EXTERNALSYM CertSetStoreProperty}
//+-------------------------------------------------------------------------
// Get a store property.
//
// The type definition for pvData depends on the dwPropId value.
// CERT_STORE_LOCALIZED_NAME_PROP_ID - localized name of the store.
// pvData points to a NULL terminated unicode, wide character string.
// cbData = (wcslen((LPWSTR) pvData) + 1) * sizeof(WCHAR).
//
// For all other PROP_IDs, pvData points to an array of bytes.
//
// If the property doesn't exist, returns FALSE and sets LastError to
// CRYPT_E_NOT_FOUND.
//--------------------------------------------------------------------------
function CertGetStoreProperty(hCertStore: HCERTSTORE; dwPropId: DWORD;
pvData: Pointer; var pcbData: DWORD): BOOL; stdcall;
{$EXTERNALSYM CertGetStoreProperty}
type
PCERT_CREATE_CONTEXT_PARA = ^CERT_CREATE_CONTEXT_PARA;
{$EXTERNALSYM PCERT_CREATE_CONTEXT_PARA}
_CERT_CREATE_CONTEXT_PARA = record
cbSize: DWORD;
pfnFree: PFN_CRYPT_FREE; // OPTIONAL
pvFree: Pointer; // OPTIONAL
end;
{$EXTERNALSYM _CERT_CREATE_CONTEXT_PARA}
CERT_CREATE_CONTEXT_PARA = _CERT_CREATE_CONTEXT_PARA;
{$EXTERNALSYM CERT_CREATE_CONTEXT_PARA}
TCertCreateContextPara = CERT_CREATE_CONTEXT_PARA;
PCertCreateContextPara = PCERT_CREATE_CONTEXT_PARA;
//+-------------------------------------------------------------------------
// Creates the specified context from the encoded bytes. The created
// context isn't put in a store.
//
// dwContextType values:
// CERT_STORE_CERTIFICATE_CONTEXT
// CERT_STORE_CRL_CONTEXT
// CERT_STORE_CTL_CONTEXT
//
// If CERT_CREATE_CONTEXT_NOCOPY_FLAG is set, the created context points
// directly to the pbEncoded instead of an allocated copy. See flag
// definition for more details.
//
// If CERT_CREATE_CONTEXT_SORTED_FLAG is set, the context is created
// with sorted entries. This flag may only be set for CERT_STORE_CTL_CONTEXT.
// Setting this flag implicitly sets CERT_CREATE_CONTEXT_NO_HCRYPTMSG_FLAG and
// CERT_CREATE_CONTEXT_NO_ENTRY_FLAG. See flag definition for
// more details.
//
// If CERT_CREATE_CONTEXT_NO_HCRYPTMSG_FLAG is set, the context is created
// without creating a HCRYPTMSG handle for the context. This flag may only be
// set for CERT_STORE_CTL_CONTEXT. See flag definition for more details.
//
// If CERT_CREATE_CONTEXT_NO_ENTRY_FLAG is set, the context is created
// without decoding the entries. This flag may only be set for
// CERT_STORE_CTL_CONTEXT. See flag definition for more details.
//
// If unable to decode and create the context, NULL is returned.
// Otherwise, a pointer to a read only CERT_CONTEXT, CRL_CONTEXT or
// CTL_CONTEXT is returned. The context must be freed by the appropriate
// free context API. The context can be duplicated by calling the
// appropriate duplicate context API.
//--------------------------------------------------------------------------
function CertCreateContext(dwContextType, dwEncodingType: DWORD;
pbEncoded: LPBYTE; cbEncoded, dwFlags: DWORD;
pCreatePara: PCERT_CREATE_CONTEXT_PARA): Pointer; stdcall;
{$EXTERNALSYM CertCreateContext}
// When the following flag is set, the created context points directly to the
// pbEncoded instead of an allocated copy. If pCreatePara and
// pCreatePara->pfnFree are non-NULL, then, pfnFree is called to free
// the pbEncoded when the context is last freed. Otherwise, no attempt is
// made to free the pbEncoded. If pCreatePara->pvFree is non-NULL, then its
// passed to pfnFree instead of pbEncoded.
//
// Note, if CertCreateContext fails, pfnFree is still called.
const
CERT_CREATE_CONTEXT_NOCOPY_FLAG = $1;
{$EXTERNALSYM CERT_CREATE_CONTEXT_NOCOPY_FLAG}
// When the following flag is set, a context with sorted entries is created.
// Currently only applicable to a CTL context.
//
// For CTLs: the cCTLEntry in the returned CTL_INFO is always
// 0. CertFindSubjectInSortedCTL and CertEnumSubjectInSortedCTL must be called
// to find or enumerate the CTL entries.
//
// The Sorted CTL TrustedSubjects extension isn't returned in the created
// context's CTL_INFO.
CERT_CREATE_CONTEXT_SORTED_FLAG = $2;
{$EXTERNALSYM CERT_CREATE_CONTEXT_SORTED_FLAG}
// By default when a CTL context is created, a HCRYPTMSG handle to its
// SignedData message is created. This flag can be set to improve performance
// by not creating the HCRYPTMSG handle.
//
// This flag is only applicable to a CTL context.
CERT_CREATE_CONTEXT_NO_HCRYPTMSG_FLAG = $4;
{$EXTERNALSYM CERT_CREATE_CONTEXT_NO_HCRYPTMSG_FLAG}
// By default when a CTL context is created, its entries are decoded.
// This flag can be set to improve performance by not decoding the
// entries.
//
// This flag is only applicable to a CTL context.
CERT_CREATE_CONTEXT_NO_ENTRY_FLAG = $8;
{$EXTERNALSYM CERT_CREATE_CONTEXT_NO_ENTRY_FLAG}
//+=========================================================================
// Certificate System Store Data Structures and APIs
//==========================================================================
//+-------------------------------------------------------------------------
// System Store Information
//
// Currently, no system store information is persisted.
//--------------------------------------------------------------------------
type
PCERT_SYSTEM_STORE_INFO = ^CERT_SYSTEM_STORE_INFO;
{$EXTERNALSYM PCERT_SYSTEM_STORE_INFO}
_CERT_SYSTEM_STORE_INFO = record
cbSize: DWORD;
end;
{$EXTERNALSYM _CERT_SYSTEM_STORE_INFO}
CERT_SYSTEM_STORE_INFO = _CERT_SYSTEM_STORE_INFO;
{$EXTERNALSYM CERT_SYSTEM_STORE_INFO}
TCertSystemStoreInfo = CERT_SYSTEM_STORE_INFO;
PCertSystemStoreInfo = PCERT_SYSTEM_STORE_INFO;
//+-------------------------------------------------------------------------
// Physical Store Information
//
// The Open fields are passed directly to CertOpenStore() to open
// the physical store.
//
// By default all system stores located in the registry have an
// implicit SystemRegistry physical store that is opened. To disable the
// opening of this store, the SystemRegistry
// physical store corresponding to the System store must be registered with
// CERT_PHYSICAL_STORE_OPEN_DISABLE_FLAG set in dwFlags. Alternatively,
// a physical store with the name of ".Default" may be registered.
//
// Depending on the store location and store name, additional predefined
// physical stores may be opened. For example, system stores in
// CURRENT_USER have the predefined physical store, .LocalMachine.
// To disable the opening of these predefined physical stores, the
// corresponding physical store must be registered with
// CERT_PHYSICAL_STORE_OPEN_DISABLE_FLAG set in dwFlags.
//
// The CERT_PHYSICAL_STORE_ADD_ENABLE_FLAG must be set in dwFlags
// to enable the adding of a context to the store.
//
// When a system store is opened via the SERVICES or USERS store location,
// the ServiceName\ is prepended to the OpenParameters
// for CERT_SYSTEM_STORE_CURRENT_USER or CERT_SYSTEM_STORE_CURRENT_SERVICE
// physical stores and the dwOpenFlags store location is changed to
// CERT_SYSTEM_STORE_USERS or CERT_SYSTEM_STORE_SERVICES.
//
// By default the SYSTEM, SYSTEM_REGISTRY and PHYSICAL provider
// stores are also opened remotely when the outer system store is opened.
// The CERT_PHYSICAL_STORE_REMOTE_OPEN_DISABLE_FLAG may be set in dwFlags
// to disable remote opens.
//
// When opened remotely, the \\ComputerName is implicitly prepended to the
// OpenParameters for the SYSTEM, SYSTEM_REGISTRY and PHYSICAL provider types.
// To also prepend the \\ComputerName to other provider types, set the
// CERT_PHYSICAL_STORE_INSERT_COMPUTER_NAME_ENABLE_FLAG in dwFlags.
//
// When the system store is opened, its physical stores are ordered
// according to the dwPriority. A larger dwPriority indicates higher priority.
//--------------------------------------------------------------------------
type
PCERT_PHYSICAL_STORE_INFO = ^CERT_PHYSICAL_STORE_INFO;
{$EXTERNALSYM PCERT_PHYSICAL_STORE_INFO}
_CERT_PHYSICAL_STORE_INFO = record
cbSize: DWORD;
pszOpenStoreProvider: LPSTR; // REG_SZ
dwOpenEncodingType: DWORD; // REG_DWORD
dwOpenFlags: DWORD; // REG_DWORD
OpenParameters: CRYPT_DATA_BLOB; // REG_BINARY
dwFlags: DWORD; // REG_DWORD
dwPriority: DWORD; // REG_DWORD
end;
{$EXTERNALSYM _CERT_PHYSICAL_STORE_INFO}
CERT_PHYSICAL_STORE_INFO = _CERT_PHYSICAL_STORE_INFO;
{$EXTERNALSYM CERT_PHYSICAL_STORE_INFO}
TCertPhysicalStoreInfo = CERT_PHYSICAL_STORE_INFO;
PCertPhysicalStoreInfo = PCERT_PHYSICAL_STORE_INFO;
//+-------------------------------------------------------------------------
// Physical Store Information dwFlags
//--------------------------------------------------------------------------
const
CERT_PHYSICAL_STORE_ADD_ENABLE_FLAG = $1;
{$EXTERNALSYM CERT_PHYSICAL_STORE_ADD_ENABLE_FLAG}
CERT_PHYSICAL_STORE_OPEN_DISABLE_FLAG = $2;
{$EXTERNALSYM CERT_PHYSICAL_STORE_OPEN_DISABLE_FLAG}
CERT_PHYSICAL_STORE_REMOTE_OPEN_DISABLE_FLAG = $4;
{$EXTERNALSYM CERT_PHYSICAL_STORE_REMOTE_OPEN_DISABLE_FLAG}
CERT_PHYSICAL_STORE_INSERT_COMPUTER_NAME_ENABLE_FLAG = $8;
{$EXTERNALSYM CERT_PHYSICAL_STORE_INSERT_COMPUTER_NAME_ENABLE_FLAG}
//+-------------------------------------------------------------------------
// Register a system store.
//
// The upper word of the dwFlags parameter is used to specify the location of
// the system store.
//
// If CERT_SYSTEM_STORE_RELOCATE_FLAG is set in dwFlags, pvSystemStore
// points to a CERT_SYSTEM_STORE_RELOCATE_PARA data structure. Otherwise,
// pvSystemStore points to a null terminated UNICODE string.
//
// The CERT_SYSTEM_STORE_SERVICES or CERT_SYSTEM_STORE_USERS system store
// name must be prefixed with the ServiceName or UserName. For example,
// "ServiceName\Trust".
//
// Stores on remote computers can be registered for the
// CERT_SYSTEM_STORE_LOCAL_MACHINE, CERT_SYSTEM_STORE_SERVICES,
// CERT_SYSTEM_STORE_USERS, CERT_SYSTEM_STORE_LOCAL_MACHINE_GROUP_POLICY
// or CERT_SYSTEM_STORE_LOCAL_MACHINE_ENTERPRISE
// locations by prepending the computer name. For example, a remote
// local machine store is registered via "\\ComputerName\Trust" or
// "ComputerName\Trust". A remote service store is registered via
// "\\ComputerName\ServiceName\Trust". The leading "\\" backslashes are
// optional in the ComputerName.
//
// Set CERT_STORE_CREATE_NEW_FLAG to cause a failure if the system store
// already exists in the store location.
//--------------------------------------------------------------------------
function CertRegisterSystemStore(pvSystemStore: Pointer; dwFlags: DWORD;
pStoreInfo: PCERT_SYSTEM_STORE_INFO; pvReserved: Pointer): BOOL; stdcall;
{$EXTERNALSYM CertRegisterSystemStore}
//+-------------------------------------------------------------------------
// Register a physical store for the specified system store.
//
// The upper word of the dwFlags parameter is used to specify the location of
// the system store.
//
// If CERT_SYSTEM_STORE_RELOCATE_FLAG is set in dwFlags, pvSystemStore
// points to a CERT_SYSTEM_STORE_RELOCATE_PARA data structure. Otherwise,
// pvSystemStore points to a null terminated UNICODE string.
//
// See CertRegisterSystemStore for details on prepending a ServiceName
// and/or ComputerName to the system store name.
//
// Set CERT_STORE_CREATE_NEW_FLAG to cause a failure if the physical store
// already exists in the system store.
//--------------------------------------------------------------------------
function CertRegisterPhysicalStore(pvSystemStore: Pointer; dwFlags: DWORD;
pwszStoreName: LPCWSTR; pStoreInfo: PCERT_PHYSICAL_STORE_INFO;
pvReserved: Pointer): BOOL; stdcall;
{$EXTERNALSYM CertRegisterPhysicalStore}
//+-------------------------------------------------------------------------
// Unregister the specified system store.
//
// The upper word of the dwFlags parameter is used to specify the location of
// the system store.
//
// If CERT_SYSTEM_STORE_RELOCATE_FLAG is set in dwFlags, pvSystemStore
// points to a CERT_SYSTEM_STORE_RELOCATE_PARA data structure. Otherwise,
// pvSystemStore points to a null terminated UNICODE string.
//
// See CertRegisterSystemStore for details on prepending a ServiceName
// and/or ComputerName to the system store name.
//
// CERT_STORE_DELETE_FLAG can optionally be set in dwFlags.
//--------------------------------------------------------------------------
function CertUnregisterSystemStore(pvSystemStore: Pointer; dwFlags: DWORD): BOOL; stdcall;
{$EXTERNALSYM CertUnregisterSystemStore}
//+-------------------------------------------------------------------------
// Unregister the physical store from the specified system store.
//
// The upper word of the dwFlags parameter is used to specify the location of
// the system store.
//
// If CERT_SYSTEM_STORE_RELOCATE_FLAG is set in dwFlags, pvSystemStore
// points to a CERT_SYSTEM_STORE_RELOCATE_PARA data structure. Otherwise,
// pvSystemStore points to a null terminated UNICODE string.
//
// See CertRegisterSystemStore for details on prepending a ServiceName
// and/or ComputerName to the system store name.
//
// CERT_STORE_DELETE_FLAG can optionally be set in dwFlags.
//--------------------------------------------------------------------------
function CertUnregisterPhysicalStore(pvSystemStore: Pointer; dwFlags: DWORD;
pwszStoreName: LPCWSTR): BOOL; stdcall;
{$EXTERNALSYM CertUnregisterPhysicalStore}
//+-------------------------------------------------------------------------
// Enum callbacks
//
// The CERT_SYSTEM_STORE_LOCATION_MASK bits in the dwFlags parameter
// specifies the location of the system store
//
// If CERT_SYSTEM_STORE_RELOCATE_FLAG is set in dwFlags, pvSystemStore
// points to a CERT_SYSTEM_STORE_RELOCATE_PARA data structure. Otherwise,
// pvSystemStore points to a null terminated UNICODE string.
//
// The callback returns FALSE and sets LAST_ERROR to stop the enumeration.
// The LAST_ERROR is returned to the caller of the enumeration.
//
// The pvSystemStore passed to the callback has leading ComputerName and/or
// ServiceName prefixes where appropriate.
//--------------------------------------------------------------------------
type
PFN_CERT_ENUM_SYSTEM_STORE_LOCATION = function(pwszStoreLocation: LPCWSTR;
dwFlags: DWORD; pvReserved: Pointer; pvArg: Pointer): BOOL; stdcall;
{$EXTERNALSYM PFN_CERT_ENUM_SYSTEM_STORE_LOCATION}
PfnCertEnumSystemStoreLocation = PFN_CERT_ENUM_SYSTEM_STORE_LOCATION;
PFN_CERT_ENUM_SYSTEM_STORE = function(pvSystemStore: Pointer;
dwFlags: DWORD; pStoreInfo: PCERT_SYSTEM_STORE_INFO; pvReserved: Pointer;
pvArg: Pointer): BOOL; stdcall;
{$EXTERNALSYM PFN_CERT_ENUM_SYSTEM_STORE}
PfnCertEnumSystemStore = PFN_CERT_ENUM_SYSTEM_STORE;
PFN_CERT_ENUM_PHYSICAL_STORE = function(pvSystemStore: Pointer;
dwFlags: DWORD; pwszStoreName: LPCWSTR; pStoreInfo: PCERT_PHYSICAL_STORE_INFO;
pvReserved: Pointer; pvArg: Pointer): BOOL; stdcall;
{$EXTERNALSYM PFN_CERT_ENUM_PHYSICAL_STORE}
PfnCertEnumPhysicalStore = PFN_CERT_ENUM_PHYSICAL_STORE;
// In the PFN_CERT_ENUM_PHYSICAL_STORE callback the following flag is
// set if the physical store wasn't registered and is an implicitly created
// predefined physical store.
const
CERT_PHYSICAL_STORE_PREDEFINED_ENUM_FLAG = $1;
{$EXTERNALSYM CERT_PHYSICAL_STORE_PREDEFINED_ENUM_FLAG}
// Names of implicitly created predefined physical stores
CERT_PHYSICAL_STORE_DEFAULT_NAME = '.Default';
{$EXTERNALSYM CERT_PHYSICAL_STORE_DEFAULT_NAME}
CERT_PHYSICAL_STORE_GROUP_POLICY_NAME = '.GroupPolicy';
{$EXTERNALSYM CERT_PHYSICAL_STORE_GROUP_POLICY_NAME}
CERT_PHYSICAL_STORE_LOCAL_MACHINE_NAME = '.LocalMachine';
{$EXTERNALSYM CERT_PHYSICAL_STORE_LOCAL_MACHINE_NAME}
CERT_PHYSICAL_STORE_DS_USER_CERTIFICATE_NAME = '.UserCertificate';
{$EXTERNALSYM CERT_PHYSICAL_STORE_DS_USER_CERTIFICATE_NAME}
CERT_PHYSICAL_STORE_LOCAL_MACHINE_GROUP_POLICY_NAME = '.LocalMachineGroupPolicy';
{$EXTERNALSYM CERT_PHYSICAL_STORE_LOCAL_MACHINE_GROUP_POLICY_NAME}
CERT_PHYSICAL_STORE_ENTERPRISE_NAME = '.Enterprise';
{$EXTERNALSYM CERT_PHYSICAL_STORE_ENTERPRISE_NAME}
//+-------------------------------------------------------------------------
// Enumerate the system store locations.
//--------------------------------------------------------------------------
function CertEnumSystemStoreLocation(dwFlags: DWORD; pvArg: Pointer;
pfnEnum: PFN_CERT_ENUM_SYSTEM_STORE_LOCATION): BOOL; stdcall;
{$EXTERNALSYM CertEnumSystemStoreLocation}
//+-------------------------------------------------------------------------
// Enumerate the system stores.
//
// The upper word of the dwFlags parameter is used to specify the location of
// the system store.
//
// If CERT_SYSTEM_STORE_RELOCATE_FLAG is set in dwFlags,
// pvSystemStoreLocationPara points to a CERT_SYSTEM_STORE_RELOCATE_PARA
// data structure. Otherwise, pvSystemStoreLocationPara points to a null
// terminated UNICODE string.
//
// For CERT_SYSTEM_STORE_LOCAL_MACHINE,
// CERT_SYSTEM_STORE_LOCAL_MACHINE_GROUP_POLICY or
// CERT_SYSTEM_STORE_LOCAL_MACHINE_ENTERPRISE, pvSystemStoreLocationPara can
// optionally be set to a unicode computer name for enumerating local machine
// stores on a remote computer. For example, "\\ComputerName" or
// "ComputerName". The leading "\\" backslashes are optional in the
// ComputerName.
//
// For CERT_SYSTEM_STORE_SERVICES or CERT_SYSTEM_STORE_USERS,
// if pvSystemStoreLocationPara is NULL, then,
// enumerates both the service/user names and the stores for each service/user
// name. Otherwise, pvSystemStoreLocationPara is a unicode string specifying a
// remote computer name and/or service/user name. For example:
// "ServiceName"
// "\\ComputerName" or "ComputerName\"
// "ComputerName\ServiceName"
// Note, if only the ComputerName is specified, then, it must have either
// the leading "\\" backslashes or a trailing backslash. Otherwise, its
// interpretted as the ServiceName or UserName.
//--------------------------------------------------------------------------
function CertEnumSystemStore(dwFlags: DWORD; pvSystemStoreLocationPara: Pointer;
pvArg: Pointer; pfnEnum: PFN_CERT_ENUM_SYSTEM_STORE): BOOL; stdcall;
{$EXTERNALSYM CertEnumSystemStore}
//+-------------------------------------------------------------------------
// Enumerate the physical stores for the specified system store.
//
// The upper word of the dwFlags parameter is used to specify the location of
// the system store.
//
// If CERT_SYSTEM_STORE_RELOCATE_FLAG is set in dwFlags, pvSystemStore
// points to a CERT_SYSTEM_STORE_RELOCATE_PARA data structure. Otherwise,
// pvSystemStore points to a null terminated UNICODE string.
//
// See CertRegisterSystemStore for details on prepending a ServiceName
// and/or ComputerName to the system store name.
//
// If the system store location only supports system stores and doesn't
// support physical stores, LastError is set to ERROR_CALL_NOT_IMPLEMENTED.
//--------------------------------------------------------------------------
function CertEnumPhysicalStore(pvSystemStore: Pointer; dwFlags: DWORD;
pvArg: Pointer; pfnEnum: PFN_CERT_ENUM_PHYSICAL_STORE): BOOL; stdcall;
{$EXTERNALSYM CertEnumPhysicalStore}
//+-------------------------------------------------------------------------
// Certificate System Store Installable Functions
//
// The CERT_SYSTEM_STORE_LOCATION_MASK bits in the dwFlags parameter passed
// to the CertOpenStore(for "System", "SystemRegistry" or "Physical"
// Provider), CertRegisterSystemStore,
// CertUnregisterSystemStore, CertEnumSystemStore, CertRegisterPhysicalStore,
// CertUnregisterPhysicalStore and CertEnumPhysicalStore APIs is used as the
// constant pszOID value passed to the OID installable functions.
// Therefore, the pszOID is restricted to a constant <= (LPCSTR) 0x0FFF.
//
// The EncodingType is 0.
//--------------------------------------------------------------------------
// Installable System Store Provider OID pszFuncNames.
const
CRYPT_OID_OPEN_SYSTEM_STORE_PROV_FUNC = 'CertDllOpenSystemStoreProv';
{$EXTERNALSYM CRYPT_OID_OPEN_SYSTEM_STORE_PROV_FUNC}
CRYPT_OID_REGISTER_SYSTEM_STORE_FUNC = 'CertDllRegisterSystemStore';
{$EXTERNALSYM CRYPT_OID_REGISTER_SYSTEM_STORE_FUNC}
CRYPT_OID_UNREGISTER_SYSTEM_STORE_FUNC = 'CertDllUnregisterSystemStore';
{$EXTERNALSYM CRYPT_OID_UNREGISTER_SYSTEM_STORE_FUNC}
CRYPT_OID_ENUM_SYSTEM_STORE_FUNC = 'CertDllEnumSystemStore';
{$EXTERNALSYM CRYPT_OID_ENUM_SYSTEM_STORE_FUNC}
CRYPT_OID_REGISTER_PHYSICAL_STORE_FUNC = 'CertDllRegisterPhysicalStore';
{$EXTERNALSYM CRYPT_OID_REGISTER_PHYSICAL_STORE_FUNC}
CRYPT_OID_UNREGISTER_PHYSICAL_STORE_FUNC = 'CertDllUnregisterPhysicalStore';
{$EXTERNALSYM CRYPT_OID_UNREGISTER_PHYSICAL_STORE_FUNC}
CRYPT_OID_ENUM_PHYSICAL_STORE_FUNC = 'CertDllEnumPhysicalStore';
{$EXTERNALSYM CRYPT_OID_ENUM_PHYSICAL_STORE_FUNC}
// CertDllOpenSystemStoreProv has the same function signature as the
// installable "CertDllOpenStoreProv" function. See CertOpenStore for
// more details.
// CertDllRegisterSystemStore has the same function signature as
// CertRegisterSystemStore.
//
// The "SystemStoreLocation" REG_SZ value must also be set for registered
// CertDllEnumSystemStore OID functions.
CRYPT_OID_SYSTEM_STORE_LOCATION_VALUE_NAME = 'SystemStoreLocation';
{$EXTERNALSYM CRYPT_OID_SYSTEM_STORE_LOCATION_VALUE_NAME}
// The remaining Register, Enum and Unregister OID installable functions
// have the same signature as their Cert Store API counterpart.
//+=========================================================================
// Enhanced Key Usage Helper Functions
//==========================================================================
//+-------------------------------------------------------------------------
// Get the enhanced key usage extension or property from the certificate
// and decode.
//
// If the CERT_FIND_EXT_ONLY_ENHKEY_USAGE_FLAG is set, then, only get the
// extension.
//
// If the CERT_FIND_PROP_ONLY_ENHKEY_USAGE_FLAG is set, then, only get the
// property.
//--------------------------------------------------------------------------
function CertGetEnhancedKeyUsage(pCertContext: PCCERT_CONTEXT; dwFlags: DWORD;
pUsage: PCERT_ENHKEY_USAGE; var pcbUsage: DWORD): BOOL; stdcall;
{$EXTERNALSYM CertGetEnhancedKeyUsage}
//+-------------------------------------------------------------------------
// Set the enhanced key usage property for the certificate.
//--------------------------------------------------------------------------
function CertSetEnhancedKeyUsage(pCertContext: PCCERT_CONTEXT;
pUsage: PCERT_ENHKEY_USAGE): BOOL; stdcall;
{$EXTERNALSYM CertSetEnhancedKeyUsage}
//+-------------------------------------------------------------------------
// Add the usage identifier to the certificate's enhanced key usage property.
//--------------------------------------------------------------------------
function CertAddEnhancedKeyUsageIdentifier(pCertContext: PCCERT_CONTEXT;
pszUsageIdentifier: LPCSTR): BOOL; stdcall;
{$EXTERNALSYM CertAddEnhancedKeyUsageIdentifier}
//+-------------------------------------------------------------------------
// Remove the usage identifier from the certificate's enhanced key usage
// property.
//--------------------------------------------------------------------------
function CertRemoveEnhancedKeyUsageIdentifier(pCertContext: PCCERT_CONTEXT;
pszUsageIdentifier: LPCSTR): BOOL; stdcall;
{$EXTERNALSYM CertRemoveEnhancedKeyUsageIdentifier}
//+---------------------------------------------------------------------------
//
//
// Takes an array of certs and returns an array of usages
// which consists of the intersection of the valid usages for each cert.
// If each cert is good for all possible usages then the cNumOIDs is set to -1.
//
//----------------------------------------------------------------------------
function CertGetValidUsages(cCerts: DWORD; rghCerts: PCCERT_CONTEXT;
var cNumOIDs: Integer; rghOIDs: LPLPSTR; var pcbOIDs: DWORD): BOOL; stdcall;
{$EXTERNALSYM CertGetValidUsages}
//+=========================================================================
// Cryptographic Message helper functions for verifying and signing a
// CTL.
//==========================================================================
//+-------------------------------------------------------------------------
// Get and verify the signer of a cryptographic message.
//
// To verify a CTL, the hCryptMsg is obtained from the CTL_CONTEXT's
// hCryptMsg field.
//
// If CMSG_TRUSTED_SIGNER_FLAG is set, then, treat the Signer stores as being
// trusted and only search them to find the certificate corresponding to the
// signer's issuer and serial number. Otherwise, the SignerStores are
// optionally provided to supplement the message's store of certificates.
// If a signer certificate is found, its public key is used to verify
// the message signature. The CMSG_SIGNER_ONLY_FLAG can be set to
// return the signer without doing the signature verify.
//
// If CMSG_USE_SIGNER_INDEX_FLAG is set, then, only get the signer specified
// by *pdwSignerIndex. Otherwise, iterate through all the signers
// until a signer verifies or no more signers.
//
// For a verified signature, *ppSigner is updated with certificate context
// of the signer and *pdwSignerIndex is updated with the index of the signer.
// ppSigner and/or pdwSignerIndex can be NULL, indicating the caller isn't
// interested in getting the CertContext and/or index of the signer.
//--------------------------------------------------------------------------
function CryptMsgGetAndVerifySigner(hCryptMsg: HCRYPTMSG; cSignerStore: DWORD;
rghSignerStore: PHCERTSTORE; dwFlags: DWORD; ppSigner: PPCCERT_CONTEXT;
pdwSignerIndex: LPDWORD): BOOL; stdcall;
{$EXTERNALSYM CryptMsgGetAndVerifySigner}
const
CMSG_TRUSTED_SIGNER_FLAG = $1;
{$EXTERNALSYM CMSG_TRUSTED_SIGNER_FLAG}
CMSG_SIGNER_ONLY_FLAG = $2;
{$EXTERNALSYM CMSG_SIGNER_ONLY_FLAG}
CMSG_USE_SIGNER_INDEX_FLAG = $4;
{$EXTERNALSYM CMSG_USE_SIGNER_INDEX_FLAG}
//+-------------------------------------------------------------------------
// Sign an encoded CTL.
//
// The pbCtlContent can be obtained via a CTL_CONTEXT's pbCtlContent
// field or via a CryptEncodeObject(PKCS_CTL or PKCS_SORTED_CTL).
//
// CMSG_CMS_ENCAPSULATED_CTL_FLAG can be set to encode a CMS compatible
// V3 SignedData message.
//--------------------------------------------------------------------------
function CryptMsgSignCTL(dwMsgEncodingType: DWORD; pbCtlContent: LPBYTE;
cbCtlContent: DWORD; pSignInfo: PCMSG_SIGNED_ENCODE_INFO; dwFlags: DWORD;
pbEncoded: LPBYTE; var pcbEncoded: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptMsgSignCTL}
// When set, CTL inner content is encapsulated within an OCTET STRING
const
CMSG_CMS_ENCAPSULATED_CTL_FLAG = $00008000;
{$EXTERNALSYM CMSG_CMS_ENCAPSULATED_CTL_FLAG}
//+-------------------------------------------------------------------------
// Encode the CTL and create a signed message containing the encoded CTL.
//
// Set CMSG_ENCODE_SORTED_CTL_FLAG if the CTL entries are to be sorted
// before encoding. This flag should be set, if the
// CertFindSubjectInSortedCTL or CertEnumSubjectInSortedCTL APIs will
// be called. If the identifier for the CTL entries is a hash, such as,
// MD5 or SHA1, then, CMSG_ENCODE_HASHED_SUBJECT_IDENTIFIER_FLAG should
// also be set.
//
// CMSG_CMS_ENCAPSULATED_CTL_FLAG can be set to encode a CMS compatible
// V3 SignedData message.
//--------------------------------------------------------------------------
function CryptMsgEncodeAndSignCTL(dwMsgEncodingType: DWORD; pCtlInfo: PCTL_INFO;
pSignInfo: PCMSG_SIGNED_ENCODE_INFO; dwFlags: DWORD; pbEncoded: LPBYTE;
var pcbEncoded: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptMsgEncodeAndSignCTL}
// The following flag is set if the CTL is to be encoded with sorted
// trusted subjects and the szOID_SORTED_CTL extension is inserted containing
// sorted offsets to the encoded subjects.
const
CMSG_ENCODE_SORTED_CTL_FLAG = $1;
{$EXTERNALSYM CMSG_ENCODE_SORTED_CTL_FLAG}
// If the above sorted flag is set, then, the following flag should also
// be set if the identifier for the TrustedSubjects is a hash,
// such as, MD5 or SHA1.
CMSG_ENCODE_HASHED_SUBJECT_IDENTIFIER_FLAG = $2;
{$EXTERNALSYM CMSG_ENCODE_HASHED_SUBJECT_IDENTIFIER_FLAG}
//+-------------------------------------------------------------------------
// Returns TRUE if the SubjectIdentifier exists in the CTL. Optionally
// returns a pointer to and byte count of the Subject's encoded attributes.
//--------------------------------------------------------------------------
function CertFindSubjectInSortedCTL(pSubjectIdentifier: PCRYPT_DATA_BLOB;
pCtlContext: PCCTL_CONTEXT; dwFlags: DWORD; pvReserved: Pointer;
pEncodedAttributes: PCRYPT_DER_BLOB): BOOL; stdcall;
{$EXTERNALSYM CertFindSubjectInSortedCTL}
//+-------------------------------------------------------------------------
// Enumerates through the sequence of TrustedSubjects in a CTL context
// created with CERT_CREATE_CONTEXT_SORTED_FLAG set.
//
// To start the enumeration, *ppvNextSubject must be NULL. Upon return,
// *ppvNextSubject is updated to point to the next TrustedSubject in
// the encoded sequence.
//
// Returns FALSE for no more subjects or invalid arguments.
//
// Note, the returned DER_BLOBs point directly into the encoded
// bytes (not allocated, and must not be freed).
//--------------------------------------------------------------------------
function CertEnumSubjectInSortedCTL(pCtlContext: PCCTL_CONTEXT;
var ppvNextSubject: Pointer; pSubjectIdentifier: PCRYPT_DER_BLOB;
pEncodedAttributes: PCRYPT_DER_BLOB): BOOL; stdcall;
{$EXTERNALSYM CertEnumSubjectInSortedCTL}
//+=========================================================================
// Certificate Verify CTL Usage Data Structures and APIs
//==========================================================================
type
PCTL_VERIFY_USAGE_PARA = ^CTL_VERIFY_USAGE_PARA;
{$EXTERNALSYM PCTL_VERIFY_USAGE_PARA}
_CTL_VERIFY_USAGE_PARA = record
cbSize: DWORD;
ListIdentifier: CRYPT_DATA_BLOB; // OPTIONAL
cCtlStore: DWORD;
rghCtlStore: PHCERTSTORE; // OPTIONAL
cSignerStore: DWORD;
rghSignerStore: PHCERTSTORE; // OPTIONAL
end;
{$EXTERNALSYM _CTL_VERIFY_USAGE_PARA}
CTL_VERIFY_USAGE_PARA = _CTL_VERIFY_USAGE_PARA;
{$EXTERNALSYM CTL_VERIFY_USAGE_PARA}
TCtlVerifyUsagePara = CTL_VERIFY_USAGE_PARA;
PCtlVerifyUsagePara = PCTL_VERIFY_USAGE_PARA;
PCTL_VERIFY_USAGE_STATUS = ^CTL_VERIFY_USAGE_STATUS;
{$EXTERNALSYM PCTL_VERIFY_USAGE_STATUS}
_CTL_VERIFY_USAGE_STATUS = record
cbSize: DWORD;
dwError: DWORD;
dwFlags: DWORD;
ppCtl: PPCCTL_CONTEXT; // IN OUT OPTIONAL
dwCtlEntryIndex: DWORD;
ppSigner: PPCCERT_CONTEXT; // IN OUT OPTIONAL
dwSignerIndex: DWORD;
end;
{$EXTERNALSYM _CTL_VERIFY_USAGE_STATUS}
CTL_VERIFY_USAGE_STATUS = _CTL_VERIFY_USAGE_STATUS;
{$EXTERNALSYM CTL_VERIFY_USAGE_STATUS}
TCtlVerifyUsageStatus = CTL_VERIFY_USAGE_STATUS;
PCtlVerifyUsageStatus = PCTL_VERIFY_USAGE_STATUS;
const
CERT_VERIFY_INHIBIT_CTL_UPDATE_FLAG = $1;
{$EXTERNALSYM CERT_VERIFY_INHIBIT_CTL_UPDATE_FLAG}
CERT_VERIFY_TRUSTED_SIGNERS_FLAG = $2;
{$EXTERNALSYM CERT_VERIFY_TRUSTED_SIGNERS_FLAG}
CERT_VERIFY_NO_TIME_CHECK_FLAG = $4;
{$EXTERNALSYM CERT_VERIFY_NO_TIME_CHECK_FLAG}
CERT_VERIFY_ALLOW_MORE_USAGE_FLAG = $8;
{$EXTERNALSYM CERT_VERIFY_ALLOW_MORE_USAGE_FLAG}
CERT_VERIFY_UPDATED_CTL_FLAG = $1;
{$EXTERNALSYM CERT_VERIFY_UPDATED_CTL_FLAG}
//+-------------------------------------------------------------------------
// Verify that a subject is trusted for the specified usage by finding a
// signed and time valid CTL with the usage identifiers and containing the
// the subject. A subject can be identified by either its certificate context
// or any identifier such as its SHA1 hash.
//
// See CertFindSubjectInCTL for definition of dwSubjectType and pvSubject
// parameters.
//
// Via pVerifyUsagePara, the caller can specify the stores to be searched
// to find the CTL. The caller can also specify the stores containing
// acceptable CTL signers. By setting the ListIdentifier, the caller
// can also restrict to a particular signer CTL list.
//
// Via pVerifyUsageStatus, the CTL containing the subject, the subject's
// index into the CTL's array of entries, and the signer of the CTL
// are returned. If the caller is not interested, ppCtl and ppSigner can be set
// to NULL. Returned contexts must be freed via the store's free context APIs.
//
// If the CERT_VERIFY_INHIBIT_CTL_UPDATE_FLAG isn't set, then, a time
// invalid CTL in one of the CtlStores may be replaced. When replaced, the
// CERT_VERIFY_UPDATED_CTL_FLAG is set in pVerifyUsageStatus->dwFlags.
//
// If the CERT_VERIFY_TRUSTED_SIGNERS_FLAG is set, then, only the
// SignerStores specified in pVerifyUsageStatus are searched to find
// the signer. Otherwise, the SignerStores provide additional sources
// to find the signer's certificate.
//
// If CERT_VERIFY_NO_TIME_CHECK_FLAG is set, then, the CTLs aren't checked
// for time validity.
//
// If CERT_VERIFY_ALLOW_MORE_USAGE_FLAG is set, then, the CTL may contain
// additional usage identifiers than specified by pSubjectUsage. Otherwise,
// the found CTL will contain the same usage identifers and no more.
//
// CertVerifyCTLUsage will be implemented as a dispatcher to OID installable
// functions. First, it will try to find an OID function matching the first
// usage object identifier in the pUsage sequence. Next, it will dispatch
// to the default CertDllVerifyCTLUsage functions.
//
// If the subject is trusted for the specified usage, then, TRUE is
// returned. Otherwise, FALSE is returned with dwError set to one of the
// following:
// CRYPT_E_NO_VERIFY_USAGE_DLL
// CRYPT_E_NO_VERIFY_USAGE_CHECK
// CRYPT_E_VERIFY_USAGE_OFFLINE
// CRYPT_E_NOT_IN_CTL
// CRYPT_E_NO_TRUSTED_SIGNER
//--------------------------------------------------------------------------
function CertVerifyCTLUsage(dwEncodingType: DWORD; dwSubjectType: DWORD;
pvSubject: Pointer; pSubjectUsage: PCTL_USAGE; dwFlags: DWORD;
pVerifyUsagePara: PCTL_VERIFY_USAGE_PARA;
pVerifyUsageStatus: PCTL_VERIFY_USAGE_STATUS): BOOL; stdcall;
{$EXTERNALSYM CertVerifyCTLUsage}
//+=========================================================================
// Certificate Revocation Data Structures and APIs
//==========================================================================
//+-------------------------------------------------------------------------
// The following data structure may be passed to CertVerifyRevocation to
// assist in finding the issuer of the context to be verified.
//
// When pIssuerCert is specified, pIssuerCert is the issuer of
// rgpvContext[cContext - 1].
//
// When cCertStore and rgCertStore are specified, these stores may contain
// an issuer certificate.
//
// When hCrlStore is specified then a handler which uses CRLs can search this
// store for them
//
// When pftTimeToUse is specified then the handler (if possible) must determine
// revocation status relative to the time given otherwise the answer may be
// independent of time or relative to current time
//--------------------------------------------------------------------------
type
PCERT_REVOCATION_PARA = ^CERT_REVOCATION_PARA;
{$EXTERNALSYM PCERT_REVOCATION_PARA}
_CERT_REVOCATION_PARA = record
cbSize: DWORD;
pIssuerCert: PCCERT_CONTEXT;
cCertStore: DWORD;
rgCertStore: PHCERTSTORE;
hCrlStore: HCERTSTORE;
pftTimeToUse: LPFILETIME;
end;
{$EXTERNALSYM _CERT_REVOCATION_PARA}
CERT_REVOCATION_PARA = _CERT_REVOCATION_PARA;
{$EXTERNALSYM CERT_REVOCATION_PARA}
TCertRevocationPara = CERT_REVOCATION_PARA;
PCertRevocationPara = PCERT_REVOCATION_PARA;
//+-------------------------------------------------------------------------
// The following data structure is returned by CertVerifyRevocation to
// specify the status of the revoked or unchecked context. Review the
// following CertVerifyRevocation comments for details.
//
// Upon input to CertVerifyRevocation, cbSize must be set to a size
// >= sizeof(CERT_REVOCATION_STATUS). Otherwise, CertVerifyRevocation
// returns FALSE and sets LastError to E_INVALIDARG.
//
// Upon input to the installed or registered CRYPT_OID_VERIFY_REVOCATION_FUNC
// functions, the dwIndex, dwError and dwReason have been zero'ed.
//--------------------------------------------------------------------------
PCERT_REVOCATION_STATUS = ^CERT_REVOCATION_STATUS;
{$EXTERNALSYM PCERT_REVOCATION_STATUS}
_CERT_REVOCATION_STATUS = record
cbSize: DWORD;
dwIndex: DWORD;
dwError: DWORD;
dwReason: DWORD;
end;
{$EXTERNALSYM _CERT_REVOCATION_STATUS}
CERT_REVOCATION_STATUS = _CERT_REVOCATION_STATUS;
{$EXTERNALSYM CERT_REVOCATION_STATUS}
TCertRevocationStatus = CERT_REVOCATION_STATUS;
PCertRevocationStatus = PCERT_REVOCATION_STATUS;
//+-------------------------------------------------------------------------
// Verifies the array of contexts for revocation. The dwRevType parameter
// indicates the type of the context data structure passed in rgpvContext.
// Currently only the revocation of certificates is defined.
//
// If the CERT_VERIFY_REV_CHAIN_FLAG flag is set, then, CertVerifyRevocation
// is verifying a chain of certs where, rgpvContext[i + 1] is the issuer
// of rgpvContext[i]. Otherwise, CertVerifyRevocation makes no assumptions
// about the order of the contexts.
//
// To assist in finding the issuer, the pRevPara may optionally be set. See
// the CERT_REVOCATION_PARA data structure for details.
//
// The contexts must contain enough information to allow the
// installable or registered revocation DLLs to find the revocation server. For
// certificates, this information would normally be conveyed in an
// extension such as the IETF's AuthorityInfoAccess extension.
//
// CertVerifyRevocation returns TRUE if all of the contexts were successfully
// checked and none were revoked. Otherwise, returns FALSE and updates the
// returned pRevStatus data structure as follows:
// dwIndex
// Index of the first context that was revoked or unable to
// be checked for revocation
// dwError
// Error status. LastError is also set to this error status.
// dwError can be set to one of the following error codes defined
// in winerror.h:
// ERROR_SUCCESS - good context
// CRYPT_E_REVOKED - context was revoked. dwReason contains the
// reason for revocation
// CRYPT_E_REVOCATION_OFFLINE - unable to connect to the
// revocation server
// CRYPT_E_NOT_IN_REVOCATION_DATABASE - the context to be checked
// was not found in the revocation server's database.
// CRYPT_E_NO_REVOCATION_CHECK - the called revocation function
// wasn't able to do a revocation check on the context
// CRYPT_E_NO_REVOCATION_DLL - no installed or registered Dll was
// found to verify revocation
// dwReason
// The dwReason is currently only set for CRYPT_E_REVOKED and contains
// the reason why the context was revoked. May be one of the following
// CRL reasons defined by the CRL Reason Code extension ("2.5.29.21")
// CRL_REASON_UNSPECIFIED 0
// CRL_REASON_KEY_COMPROMISE 1
// CRL_REASON_CA_COMPROMISE 2
// CRL_REASON_AFFILIATION_CHANGED 3
// CRL_REASON_SUPERSEDED 4
// CRL_REASON_CESSATION_OF_OPERATION 5
// CRL_REASON_CERTIFICATE_HOLD 6
//
// For each entry in rgpvContext, CertVerifyRevocation iterates
// through the CRYPT_OID_VERIFY_REVOCATION_FUNC
// function set's list of installed DEFAULT functions.
// CryptGetDefaultOIDFunctionAddress is called with pwszDll = NULL. If no
// installed functions are found capable of doing the revocation verification,
// CryptVerifyRevocation iterates through CRYPT_OID_VERIFY_REVOCATION_FUNC's
// list of registered DEFAULT Dlls. CryptGetDefaultOIDDllList is called to
// get the list. CryptGetDefaultOIDFunctionAddress is called to load the Dll.
//
// The called functions have the same signature as CertVerifyRevocation. A
// called function returns TRUE if it was able to successfully check all of
// the contexts and none were revoked. Otherwise, the called function returns
// FALSE and updates pRevStatus. dwIndex is set to the index of
// the first context that was found to be revoked or unable to be checked.
// dwError and LastError are updated. For CRYPT_E_REVOKED, dwReason
// is updated. Upon input to the called function, dwIndex, dwError and
// dwReason have been zero'ed. cbSize has been checked to be >=
// sizeof(CERT_REVOCATION_STATUS).
//
// If the called function returns FALSE, and dwError isn't set to
// CRYPT_E_REVOKED, then, CertVerifyRevocation either continues on to the
// next DLL in the list for a returned dwIndex of 0 or for a returned
// dwIndex > 0, restarts the process of finding a verify function by
// advancing the start of the context array to the returned dwIndex and
// decrementing the count of remaining contexts.
//--------------------------------------------------------------------------
function CertVerifyRevocation(dwEncodingType, dwRevType, cContext: DWORD;
rgpvContext: PVOID; dwFlags: DWORD; pRevPara: PCERT_REVOCATION_PARA;
pRevStatus: PCERT_REVOCATION_STATUS): BOOL; stdcall;
{$EXTERNALSYM CertVerifyRevocation}
//+-------------------------------------------------------------------------
// Revocation types
//--------------------------------------------------------------------------
const
CERT_CONTEXT_REVOCATION_TYPE = 1;
{$EXTERNALSYM CERT_CONTEXT_REVOCATION_TYPE}
//+-------------------------------------------------------------------------
// When the following flag is set, rgpvContext[] consists of a chain
// of certificates, where rgpvContext[i + 1] is the issuer of rgpvContext[i].
//--------------------------------------------------------------------------
CERT_VERIFY_REV_CHAIN_FLAG = $00000001;
{$EXTERNALSYM CERT_VERIFY_REV_CHAIN_FLAG}
//+-------------------------------------------------------------------------
// CERT_VERIFY_CACHE_ONLY_BASED_REVOCATION prevents the revocation handler from
// accessing any network based resources for revocation checking
//--------------------------------------------------------------------------
CERT_VERIFY_CACHE_ONLY_BASED_REVOCATION = $00000002;
{$EXTERNALSYM CERT_VERIFY_CACHE_ONLY_BASED_REVOCATION}
//+-------------------------------------------------------------------------
// CERT_CONTEXT_REVOCATION_TYPE
//
// pvContext points to a const CERT_CONTEXT.
//--------------------------------------------------------------------------
//+=========================================================================
// Certificate Helper APIs
//==========================================================================
//+-------------------------------------------------------------------------
// Compare two multiple byte integer blobs to see if they are identical.
//
// Before doing the comparison, leading zero bytes are removed from a
// positive number and leading 0xFF bytes are removed from a negative
// number.
//
// The multiple byte integers are treated as Little Endian. pbData[0] is the
// least significant byte and pbData[cbData - 1] is the most significant
// byte.
//
// Returns TRUE if the integer blobs are identical after removing leading
// 0 or 0xFF bytes.
//--------------------------------------------------------------------------
function CertCompareIntegerBlob(pInt1, pInt2: PCRYPT_INTEGER_BLOB): BOOL; stdcall;
{$EXTERNALSYM CertCompareIntegerBlob}
//+-------------------------------------------------------------------------
// Compare two certificates to see if they are identical.
//
// Since a certificate is uniquely identified by its Issuer and SerialNumber,
// these are the only fields needing to be compared.
//
// Returns TRUE if the certificates are identical.
//--------------------------------------------------------------------------
function CertCompareCertificate(dwCertEncodingType: DWORD; pCertId1, pCertId2: PCERT_INFO): BOOL; stdcall;
{$EXTERNALSYM CertCompareCertificate}
//+-------------------------------------------------------------------------
// Compare two certificate names to see if they are identical.
//
// Returns TRUE if the names are identical.
//--------------------------------------------------------------------------
function CertCompareCertificateName(dwCertEncodingType: DWORD;
pCertName1: PCERT_NAME_BLOB; pCertName2: PCERT_NAME_BLOB): BOOL; stdcall;
{$EXTERNALSYM CertCompareCertificateName}
//+-------------------------------------------------------------------------
// Compare the attributes in the certificate name with the specified
// Relative Distinguished Name's (CERT_RDN) array of attributes.
// The comparison iterates through the CERT_RDN attributes and looks for an
// attribute match in any of the certificate name's RDNs.
// Returns TRUE if all the attributes are found and match.
//
// The CERT_RDN_ATTR fields can have the following special values:
// pszObjId == NULL - ignore the attribute object identifier
// dwValueType == RDN_ANY_TYPE - ignore the value type
//
// CERT_CASE_INSENSITIVE_IS_RDN_ATTRS_FLAG should be set to do
// a case insensitive match. Otherwise, defaults to an exact, case sensitive
// match.
//
// CERT_UNICODE_IS_RDN_ATTRS_FLAG should be set if the pRDN was initialized
// with unicode strings as for CryptEncodeObject(X509_UNICODE_NAME).
//--------------------------------------------------------------------------
function CertIsRDNAttrsInCertificateName(dwCertEncodingType, dwFlags: DWORD;
pCertName: PCERT_NAME_BLOB; pRDN: PCERT_RDN): BOOL; stdcall;
{$EXTERNALSYM CertIsRDNAttrsInCertificateName}
const
CERT_UNICODE_IS_RDN_ATTRS_FLAG = $1;
{$EXTERNALSYM CERT_UNICODE_IS_RDN_ATTRS_FLAG}
CERT_CASE_INSENSITIVE_IS_RDN_ATTRS_FLAG = $2;
{$EXTERNALSYM CERT_CASE_INSENSITIVE_IS_RDN_ATTRS_FLAG}
//+-------------------------------------------------------------------------
// Compare two public keys to see if they are identical.
//
// Returns TRUE if the keys are identical.
//--------------------------------------------------------------------------
function CertComparePublicKeyInfo(dwCertEncodingType: DWORD;
pPublicKey1, pPublicKey2: PCERT_PUBLIC_KEY_INFO): BOOL; stdcall;
{$EXTERNALSYM CertComparePublicKeyInfo}
//+-------------------------------------------------------------------------
// Get the public/private key's bit length.
//
// Returns 0 if unable to determine the key's length.
//--------------------------------------------------------------------------
function CertGetPublicKeyLength(dwCertEncodingType: DWORD;
pPublicKey: PCERT_PUBLIC_KEY_INFO): DWORD; stdcall;
{$EXTERNALSYM CertGetPublicKeyLength}
//+-------------------------------------------------------------------------
// Verify the signature of a subject certificate or a CRL using the
// public key info
//
// Returns TRUE for a valid signature.
//
// hCryptProv specifies the crypto provider to use to verify the signature.
// It doesn't need to use a private key.
//--------------------------------------------------------------------------
function CryptVerifyCertificateSignature(hCryptProv: HCRYPTPROV;
dwCertEncodingType: DWORD; pbEncoded: LPBYTE; cbEncoded: DWORD;
pPublicKey: PCERT_PUBLIC_KEY_INFO): BOOL; stdcall;
{$EXTERNALSYM CryptVerifyCertificateSignature}
//+-------------------------------------------------------------------------
// Verify the signature of a subject certificate, CRL, certificate request
// or keygen request using the issuer's public key.
//
// Returns TRUE for a valid signature.
//
// The subject can be an encoded blob or a context for a certificate or CRL.
// For a subject certificate context, if the certificate is missing
// inheritable PublicKey Algorithm Parameters, the context's
// CERT_PUBKEY_ALG_PARA_PROP_ID is updated with the issuer's public key
// algorithm parameters for a valid signature.
//
// The issuer can be a pointer to a CERT_PUBLIC_KEY_INFO, certificate
// context or a chain context.
//
// hCryptProv specifies the crypto provider to use to verify the signature.
// Its private key isn't used. If hCryptProv is NULL, a default
// provider is picked according to the PublicKey Algorithm OID.
//--------------------------------------------------------------------------
function CryptVerifyCertificateSignatureEx(hCryptProv: HCRYPTPROV;
dwCertEncodingType, dwSubjectType: DWORD; pvSubject: Pointer;
dwIssuerType: DWORD; pvIssuer: Pointer; dwFlags: DWORD; pvReserved: Pointer): BOOL; stdcall;
{$EXTERNALSYM CryptVerifyCertificateSignatureEx}
// Subject Types
const
CRYPT_VERIFY_CERT_SIGN_SUBJECT_BLOB = 1;
{$EXTERNALSYM CRYPT_VERIFY_CERT_SIGN_SUBJECT_BLOB}
// pvSubject :: PCRYPT_DATA_BLOB
CRYPT_VERIFY_CERT_SIGN_SUBJECT_CERT = 2;
{$EXTERNALSYM CRYPT_VERIFY_CERT_SIGN_SUBJECT_CERT}
// pvSubject :: PCCERT_CONTEXT
CRYPT_VERIFY_CERT_SIGN_SUBJECT_CRL = 3;
{$EXTERNALSYM CRYPT_VERIFY_CERT_SIGN_SUBJECT_CRL}
// pvSubject :: PCCRL_CONTEXT
// Issuer Types
CRYPT_VERIFY_CERT_SIGN_ISSUER_PUBKEY = 1;
{$EXTERNALSYM CRYPT_VERIFY_CERT_SIGN_ISSUER_PUBKEY}
// pvIssuer :: PCERT_PUBLIC_KEY_INFO
CRYPT_VERIFY_CERT_SIGN_ISSUER_CERT = 2;
{$EXTERNALSYM CRYPT_VERIFY_CERT_SIGN_ISSUER_CERT}
// pvIssuer :: PCCERT_CONTEXT
CRYPT_VERIFY_CERT_SIGN_ISSUER_CHAIN = 3;
{$EXTERNALSYM CRYPT_VERIFY_CERT_SIGN_ISSUER_CHAIN}
// pvIssuer :: PCCERT_CHAIN_CONTEXT
//+-------------------------------------------------------------------------
// Compute the hash of the "to be signed" information in the encoded
// signed content (CERT_SIGNED_CONTENT_INFO).
//
// hCryptProv specifies the crypto provider to use to compute the hash.
// It doesn't need to use a private key.
//--------------------------------------------------------------------------
function CryptHashToBeSigned(hCryptProv: HCRYPTPROV; dwCertEncodingType: DWORD;
pbEncoded: LPBYTE; cbEncoded: DWORD; pbComputedHash: LPBYTE;
var pcbComputedHash: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptHashToBeSigned}
//+-------------------------------------------------------------------------
// Hash the encoded content.
//
// hCryptProv specifies the crypto provider to use to compute the hash.
// It doesn't need to use a private key.
//
// Algid specifies the CAPI hash algorithm to use. If Algid is 0, then, the
// default hash algorithm (currently SHA1) is used.
//--------------------------------------------------------------------------
function CryptHashCertificate(hCryptProv: HCRYPTPROV; Algid: ALG_ID;
dwFlags: DWORD; pbEncoded: LPBYTE; cbEncoded: DWORD; pbComputedHash: LPBYTE;
var pcbComputedHash: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptHashCertificate}
//+-------------------------------------------------------------------------
// Sign the "to be signed" information in the encoded signed content.
//
// hCryptProv specifies the crypto provider to use to do the signature.
// It uses the specified private key.
//--------------------------------------------------------------------------
function CryptSignCertificate(hCryptProv: HCRYPTPROV; dwKeySpec: DWORD;
dwCertEncodingType: DWORD; pbEncodedToBeSigned: LPBYTE; cbEncodedToBeSigned: DWORD;
pSignatureAlgorithm: PCRYPT_ALGORITHM_IDENTIFIER; pvHashAuxInfo: Pointer;
pbSignature: LPBYTE; var pcbSignature: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptSignCertificate}
//+-------------------------------------------------------------------------
// Encode the "to be signed" information. Sign the encoded "to be signed".
// Encode the "to be signed" and the signature.
//
// hCryptProv specifies the crypto provider to use to do the signature.
// It uses the specified private key.
//--------------------------------------------------------------------------
function CryptSignAndEncodeCertificate(hCryptProv: HCRYPTPROV; dwKeySpec: DWORD;
dwCertEncodingType: DWORD; lpszStructType: LPCSTR; pvStructInfo: Pointer;
pSignatureAlgorithm: PCRYPT_ALGORITHM_IDENTIFIER; pvHashAuxInfo: Pointer;
pbEncoded: PBYTE; var pcbEncoded: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptSignAndEncodeCertificate}
//+-------------------------------------------------------------------------
// Verify the time validity of a certificate.
//
// Returns -1 if before NotBefore, +1 if after NotAfter and otherwise 0 for
// a valid certificate
//
// If pTimeToVerify is NULL, uses the current time.
//--------------------------------------------------------------------------
function CertVerifyTimeValidity(pTimeToVerify: LPFILETIME; pCertInfo: PCERT_INFO): LONG; stdcall;
{$EXTERNALSYM CertVerifyTimeValidity}
//+-------------------------------------------------------------------------
// Verify the time validity of a CRL.
//
// Returns -1 if before ThisUpdate, +1 if after NextUpdate and otherwise 0 for
// a valid CRL
//
// If pTimeToVerify is NULL, uses the current time.
//--------------------------------------------------------------------------
function CertVerifyCRLTimeValidity(pTimeToVerify: LPFILETIME; pCrlInfo: PCRL_INFO): LONG; stdcall;
{$EXTERNALSYM CertVerifyCRLTimeValidity}
//+-------------------------------------------------------------------------
// Verify that the subject's time validity nests within the issuer's time
// validity.
//
// Returns TRUE if it nests. Otherwise, returns FALSE.
//--------------------------------------------------------------------------
function CertVerifyValidityNesting(pSubjectInfo, pIssuerInfo: PCERT_INFO): BOOL; stdcall;
{$EXTERNALSYM CertVerifyValidityNesting}
//+-------------------------------------------------------------------------
// Verify that the subject certificate isn't on its issuer CRL.
//
// Returns true if the certificate isn't on the CRL.
//--------------------------------------------------------------------------
function CertVerifyCRLRevocation(dwCertEncodingType: DWORD; pCertId: PCERT_INFO;
cCrlInfo: DWORD; rgpCrlInfo: PCRL_INFO): BOOL; stdcall;
{$EXTERNALSYM CertVerifyCRLRevocation}
//+-------------------------------------------------------------------------
// Convert the CAPI AlgId to the ASN.1 Object Identifier string
//
// Returns NULL if there isn't an ObjId corresponding to the AlgId.
//--------------------------------------------------------------------------
function CertAlgIdToOID(dwAlgId: DWORD): LPCSTR; stdcall;
{$EXTERNALSYM CertAlgIdToOID}
//+-------------------------------------------------------------------------
// Convert the ASN.1 Object Identifier string to the CAPI AlgId.
//
// Returns 0 if there isn't an AlgId corresponding to the ObjId.
//--------------------------------------------------------------------------
function CertOIDToAlgId(pszObjId: LPCSTR): DWORD; stdcall;
{$EXTERNALSYM CertOIDToAlgId}
//+-------------------------------------------------------------------------
// Find an extension identified by its Object Identifier.
//
// If found, returns pointer to the extension. Otherwise, returns NULL.
//--------------------------------------------------------------------------
function CertFindExtension(pszObjId: LPCSTR; cExtensions: DWORD;
rgExtensions: PCERT_EXTENSION): PCERT_EXTENSION; stdcall;
{$EXTERNALSYM CertFindExtension}
//+-------------------------------------------------------------------------
// Find the first attribute identified by its Object Identifier.
//
// If found, returns pointer to the attribute. Otherwise, returns NULL.
//--------------------------------------------------------------------------
function CertFindAttribute(pszObjId: LPCSTR; cAttr: DWORD;
rgAttr: PCRYPT_ATTRIBUTE): PCRYPT_ATTRIBUTE; stdcall;
{$EXTERNALSYM CertFindAttribute}
//+-------------------------------------------------------------------------
// Find the first CERT_RDN attribute identified by its Object Identifier in
// the name's list of Relative Distinguished Names.
//
// If found, returns pointer to the attribute. Otherwise, returns NULL.
//--------------------------------------------------------------------------
function CertFindRDNAttr(pszObjId: LPCSTR; pName: PCERT_NAME_INFO): PCERT_RDN_ATTR; stdcall;
{$EXTERNALSYM CertFindRDNAttr}
//+-------------------------------------------------------------------------
// Get the intended key usage bytes from the certificate.
//
// If the certificate doesn't have any intended key usage bytes, returns FALSE
// and *pbKeyUsage is zeroed. Otherwise, returns TRUE and up through
// cbKeyUsage bytes are copied into *pbKeyUsage. Any remaining uncopied
// bytes are zeroed.
//--------------------------------------------------------------------------
function CertGetIntendedKeyUsage(dwCertEncodingType: DWORD; pCertInfo: PCERT_INFO;
pbKeyUsage: LPBYTE; cbKeyUsage: DWORD): BOOL; stdcall;
{$EXTERNALSYM CertGetIntendedKeyUsage}
type
HCRYPTDEFAULTCONTEXT = Pointer;
{$EXTERNALSYM HCRYPTDEFAULTCONTEXT}
//+-------------------------------------------------------------------------
// Install a previously CryptAcquiredContext'ed HCRYPTPROV to be used as
// a default context.
//
// dwDefaultType and pvDefaultPara specify where the default context is used.
// For example, install the HCRYPTPROV to be used to verify certificate's
// having szOID_OIWSEC_md5RSA signatures.
//
// By default, the installed HCRYPTPROV is only applicable to the current
// thread. Set CRYPT_DEFAULT_CONTEXT_PROCESS_FLAG to allow the HCRYPTPROV
// to be used by all threads in the current process.
//
// For a successful install, TRUE is returned and *phDefaultContext is
// updated with the HANDLE to be passed to CryptUninstallDefaultContext.
//
// The installed HCRYPTPROVs are stack ordered (the last installed
// HCRYPTPROV is checked first). All thread installed HCRYPTPROVs are
// checked before any process HCRYPTPROVs.
//
// The installed HCRYPTPROV remains available for default usage until
// CryptUninstallDefaultContext is called or the thread or process exits.
//
// If CRYPT_DEFAULT_CONTEXT_AUTO_RELEASE_FLAG is set, then, the HCRYPTPROV
// is CryptReleaseContext'ed at thread or process exit. However,
// not CryptReleaseContext'ed if CryptUninstallDefaultContext is
// called.
//--------------------------------------------------------------------------
function CryptInstallDefaultContext(hCryptProv: HCRYPTPROV; dwDefaultType: DWORD;
pvDefaultPara: Pointer; dwFlags: DWORD; pvReserved: Pointer;
var phDefaultContext: HCRYPTDEFAULTCONTEXT): BOOL; stdcall;
{$EXTERNALSYM CryptInstallDefaultContext}
// dwFlags
const
CRYPT_DEFAULT_CONTEXT_AUTO_RELEASE_FLAG = $00000001;
{$EXTERNALSYM CRYPT_DEFAULT_CONTEXT_AUTO_RELEASE_FLAG}
CRYPT_DEFAULT_CONTEXT_PROCESS_FLAG = $00000002;
{$EXTERNALSYM CRYPT_DEFAULT_CONTEXT_PROCESS_FLAG}
// List of dwDefaultType's
CRYPT_DEFAULT_CONTEXT_CERT_SIGN_OID = 1;
{$EXTERNALSYM CRYPT_DEFAULT_CONTEXT_CERT_SIGN_OID}
CRYPT_DEFAULT_CONTEXT_MULTI_CERT_SIGN_OID = 2;
{$EXTERNALSYM CRYPT_DEFAULT_CONTEXT_MULTI_CERT_SIGN_OID}
//+-------------------------------------------------------------------------
// CRYPT_DEFAULT_CONTEXT_CERT_SIGN_OID
//
// Install a default HCRYPTPROV used to verify a certificate
// signature. pvDefaultPara points to the szOID of the certificate
// signature algorithm, for example, szOID_OIWSEC_md5RSA. If
// pvDefaultPara is NULL, then, the HCRYPTPROV is used to verify all
// certificate signatures. Note, pvDefaultPara can't be NULL when
// CRYPT_DEFAULT_CONTEXT_PROCESS_FLAG is set.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CRYPT_DEFAULT_CONTEXT_MULTI_CERT_SIGN_OID
//
// Same as CRYPT_DEFAULT_CONTEXT_CERT_SIGN_OID. However, the default
// HCRYPTPROV is to be used for multiple signature szOIDs. pvDefaultPara
// points to a CRYPT_DEFAULT_CONTEXT_MULTI_OID_PARA structure containing
// an array of szOID pointers.
//--------------------------------------------------------------------------
type
PCRYPT_DEFAULT_CONTEXT_MULTI_OID_PARA = ^CRYPT_DEFAULT_CONTEXT_MULTI_OID_PARA;
{$EXTERNALSYM PCRYPT_DEFAULT_CONTEXT_MULTI_OID_PARA}
_CRYPT_DEFAULT_CONTEXT_MULTI_OID_PARA = record
cOID: DWORD;
rgpszOID: LPLPSTR;
end;
{$EXTERNALSYM _CRYPT_DEFAULT_CONTEXT_MULTI_OID_PARA}
CRYPT_DEFAULT_CONTEXT_MULTI_OID_PARA = _CRYPT_DEFAULT_CONTEXT_MULTI_OID_PARA;
{$EXTERNALSYM CRYPT_DEFAULT_CONTEXT_MULTI_OID_PARA}
TCryptDefaultContextMultiOidPara = CRYPT_DEFAULT_CONTEXT_MULTI_OID_PARA;
PCryptDefaultContextMultiOidPara = PCRYPT_DEFAULT_CONTEXT_MULTI_OID_PARA;
//+-------------------------------------------------------------------------
// Uninstall a default context previously installed by
// CryptInstallDefaultContext.
//
// For a default context installed with CRYPT_DEFAULT_CONTEXT_PROCESS_FLAG
// set, if any other threads are currently using this context,
// this function will block until they finish.
//--------------------------------------------------------------------------
function CryptUninstallDefaultContext(hDefaultContext: HCRYPTDEFAULTCONTEXT;
dwFlags: DWORD; pvReserved: Pointer): BOOL; stdcall;
{$EXTERNALSYM CryptUninstallDefaultContext}
//+-------------------------------------------------------------------------
// Export the public key info associated with the provider's corresponding
// private key.
//
// Calls CryptExportPublicKeyInfo with pszPublicKeyObjId = szOID_RSA_RSA,
// dwFlags = 0 and pvAuxInfo = NULL.
//--------------------------------------------------------------------------
function CryptExportPublicKeyInfo(hCryptProv: HCRYPTPROV; dwKeySpec: DWORD;
dwCertEncodingType: DWORD; pInfo: PCERT_PUBLIC_KEY_INFO; var pcbInfo: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptExportPublicKeyInfo}
//+-------------------------------------------------------------------------
// Export the public key info associated with the provider's corresponding
// private key.
//
// Uses the dwCertEncodingType and pszPublicKeyObjId to call the
// installable CRYPT_OID_EXPORT_PUBLIC_KEY_INFO_FUNC. The called function
// has the same signature as CryptExportPublicKeyInfoEx.
//
// If unable to find an installable OID function for the pszPublicKeyObjId,
// attempts to export as a RSA Public Key (szOID_RSA_RSA).
//
// The dwFlags and pvAuxInfo aren't used for szOID_RSA_RSA.
//--------------------------------------------------------------------------
const
CRYPT_OID_EXPORT_PUBLIC_KEY_INFO_FUNC = 'CryptDllExportPublicKeyInfoEx';
{$EXTERNALSYM CRYPT_OID_EXPORT_PUBLIC_KEY_INFO_FUNC}
function CryptExportPublicKeyInfoEx(hCryptProv: HCRYPTPROV; dwKeySpec: DWORD;
dwCertEncodingType: DWORD; pszPublicKeyObjId: LPSTR; dwFlags: DWORD;
pvAuxInfo: Pointer; pInfo: PCERT_PUBLIC_KEY_INFO; var pcbInfo: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptExportPublicKeyInfoEx}
//+-------------------------------------------------------------------------
// Convert and import the public key info into the provider and return a
// handle to the public key.
//
// Calls CryptImportPublicKeyInfoEx with aiKeyAlg = 0, dwFlags = 0 and
// pvAuxInfo = NULL.
//--------------------------------------------------------------------------
function CryptImportPublicKeyInfo(hCryptProv: HCRYPTPROV; dwCertEncodingType: DWORD;
pInfo: PCERT_PUBLIC_KEY_INFO; var phKey: HCRYPTKEY): BOOL; stdcall;
{$EXTERNALSYM CryptImportPublicKeyInfo}
//+-------------------------------------------------------------------------
// Convert and import the public key info into the provider and return a
// handle to the public key.
//
// Uses the dwCertEncodingType and pInfo->Algorithm.pszObjId to call the
// installable CRYPT_OID_IMPORT_PUBLIC_KEY_INFO_FUNC. The called function
// has the same signature as CryptImportPublicKeyInfoEx.
//
// If unable to find an installable OID function for the pszObjId,
// attempts to import as a RSA Public Key (szOID_RSA_RSA).
//
// For szOID_RSA_RSA: aiKeyAlg may be set to CALG_RSA_SIGN or CALG_RSA_KEYX.
// Defaults to CALG_RSA_KEYX. The dwFlags and pvAuxInfo aren't used.
//--------------------------------------------------------------------------
const
CRYPT_OID_IMPORT_PUBLIC_KEY_INFO_FUNC = 'CryptDllImportPublicKeyInfoEx';
{$EXTERNALSYM CRYPT_OID_IMPORT_PUBLIC_KEY_INFO_FUNC}
function CryptImportPublicKeyInfoEx(hCryptProv: HCRYPTPROV; dwCertEncodingType: DWORD;
pInfo: PCERT_PUBLIC_KEY_INFO; aiKeyAlg: ALG_ID; dwFlags: DWORD; pvAuxInfo: Pointer;
var phKey: HCRYPTKEY): BOOL; stdcall;
{$EXTERNALSYM CryptImportPublicKeyInfoEx}
//+-------------------------------------------------------------------------
// Acquire a HCRYPTPROV handle and dwKeySpec for the specified certificate
// context. Uses the certificate's CERT_KEY_PROV_INFO_PROP_ID property.
// The returned HCRYPTPROV handle may optionally be cached using the
// certificate's CERT_KEY_CONTEXT_PROP_ID property.
//
// If CRYPT_ACQUIRE_CACHE_FLAG is set, then, if an already acquired and
// cached HCRYPTPROV exists for the certificate, its returned. Otherwise,
// a HCRYPTPROV is acquired and then cached via the certificate's
// CERT_KEY_CONTEXT_PROP_ID.
//
// The CRYPT_ACQUIRE_USE_PROV_INFO_FLAG can be set to use the dwFlags field of
// the certificate's CERT_KEY_PROV_INFO_PROP_ID property's CRYPT_KEY_PROV_INFO
// data structure to determine if the returned HCRYPTPROV should be cached.
// HCRYPTPROV caching is enabled if the CERT_SET_KEY_CONTEXT_PROP_ID flag was
// set.
//
// If CRYPT_ACQUIRE_COMPARE_KEY_FLAG is set, then,
// the public key in the certificate is compared with the public
// key returned by the cryptographic provider. If the keys don't match, the
// acquire fails and LastError is set to NTE_BAD_PUBLIC_KEY. Note, if
// a cached HCRYPTPROV is returned, the comparison isn't done. We assume the
// comparison was done on the initial acquire.
//
// *pfCallerFreeProv is returned set to FALSE for:
// - Acquire or public key comparison fails.
// - CRYPT_ACQUIRE_CACHE_FLAG is set.
// - CRYPT_ACQUIRE_USE_PROV_INFO_FLAG is set AND
// CERT_SET_KEY_CONTEXT_PROP_ID flag is set in the dwFlags field of the
// certificate's CERT_KEY_PROV_INFO_PROP_ID property's
// CRYPT_KEY_PROV_INFO data structure.
// When *pfCallerFreeProv is FALSE, the caller must not release. The
// returned HCRYPTPROV will be released on the last free of the certificate
// context.
//
// Otherwise, *pfCallerFreeProv is TRUE and the returned HCRYPTPROV must
// be released by the caller by calling CryptReleaseContext.
//--------------------------------------------------------------------------
function CryptAcquireCertificatePrivateKey(pCert: PCCERT_CONTEXT; dwFlags: DWORD;
pvReserved: Pointer; var phCryptProv: HCRYPTPROV; pdwKeySpec: LPDWORD;
pfCallerFreeProv: PBOOL): BOOL; stdcall;
{$EXTERNALSYM CryptAcquireCertificatePrivateKey}
const
CRYPT_ACQUIRE_CACHE_FLAG = $1;
{$EXTERNALSYM CRYPT_ACQUIRE_CACHE_FLAG}
CRYPT_ACQUIRE_USE_PROV_INFO_FLAG = $2;
{$EXTERNALSYM CRYPT_ACQUIRE_USE_PROV_INFO_FLAG}
CRYPT_ACQUIRE_COMPARE_KEY_FLAG = $4;
{$EXTERNALSYM CRYPT_ACQUIRE_COMPARE_KEY_FLAG}
//+-------------------------------------------------------------------------
// Enumerates the cryptographic providers and their containers to find the
// private key corresponding to the certificate's public key. For a match,
// the certificate's CERT_KEY_PROV_INFO_PROP_ID property is updated.
//
// If the CERT_KEY_PROV_INFO_PROP_ID is already set, then, its checked to
// see if it matches the provider's public key. For a match, the above
// enumeration is skipped.
//
// By default both the user and machine key containers are searched.
// The CRYPT_FIND_USER_KEYSET_FLAG or CRYPT_FIND_MACHINE_KEYSET_FLAG
// can be set in dwFlags to restrict the search to either of the containers.
//
// If a container isn't found, returns FALSE with LastError set to
// NTE_NO_KEY.
//--------------------------------------------------------------------------
function CryptFindCertificateKeyProvInfo(pCert: PCCERT_CONTEXT; dwFlags: DWORD;
pvReserved: Pointer): BOOL; stdcall;
{$EXTERNALSYM CryptFindCertificateKeyProvInfo}
const
CRYPT_FIND_USER_KEYSET_FLAG = $1;
{$EXTERNALSYM CRYPT_FIND_USER_KEYSET_FLAG}
CRYPT_FIND_MACHINE_KEYSET_FLAG = $2;
{$EXTERNALSYM CRYPT_FIND_MACHINE_KEYSET_FLAG}
//+-------------------------------------------------------------------------
// This is the prototype for the installable function which is called to
// actually import a key into a CSP. an installable of this type is called
// from CryptImportPKCS8. the algorithm OID of the private key is used
// to look up the proper installable function to call.
//
// hCryptProv - the provider to import the key to
// pPrivateKeyInfo - describes the key to be imported
// dwFlags - The available flags are:
// CRYPT_EXPORTABLE
// this flag is used when importing private keys, for a full
// explanation please see the documentation for CryptImportKey.
// pvAuxInfo - reserved for future, must be NULL
//--------------------------------------------------------------------------
type
PFN_IMPORT_PRIV_KEY_FUNC = function(hCryptProv: HCRYPTPROV;
pPrivateKeyInfo: PCRYPT_PRIVATE_KEY_INFO; dwFlags: DWORD;
pvAuxInfo: Pointer): BOOL; stdcall;
{$EXTERNALSYM PFN_IMPORT_PRIV_KEY_FUNC}
PFnImportPrivKeyFunc = PFN_IMPORT_PRIV_KEY_FUNC;
const
CRYPT_OID_IMPORT_PRIVATE_KEY_INFO_FUNC = 'CryptDllImportPrivateKeyInfoEx';
{$EXTERNALSYM CRYPT_OID_IMPORT_PRIVATE_KEY_INFO_FUNC}
//+-------------------------------------------------------------------------
// Convert (from PKCS8 format) and import the private key into a provider
// and return a handle to the provider as well as the KeySpec used to import to.
//
// This function will call the PRESOLVE_HCRYPTPROV_FUNC in the
// privateKeyAndParams to obtain a handle of provider to import the key to.
// if the PRESOLVE_HCRYPTPROV_FUNC is NULL then the default provider will be used.
//
// privateKeyAndParams - private key blob and corresponding parameters
// dwFlags - The available flags are:
// CRYPT_EXPORTABLE
// this flag is used when importing private keys, for a full
// explanation please see the documentation for CryptImportKey.
// phCryptProv - filled in with the handle of the provider the key was
// imported to, the caller is responsible for freeing it
// pvAuxInfo - This parameter is reserved for future use and should be set
// to NULL in the interim.
//--------------------------------------------------------------------------
function CryptImportPKCS8(sImportParams: CRYPT_PKCS8_IMPORT_PARAMS; dwFlags: DWORD;
phCryptProv: PHCRYPTPROV; pvAuxInfo: Pointer): BOOL; stdcall;
{$EXTERNALSYM CryptImportPKCS8}
//+-------------------------------------------------------------------------
// this is the prototype for installable functions for exporting the private key
//--------------------------------------------------------------------------
type
PFN_EXPORT_PRIV_KEY_FUNC = function(hCryptProv: HCRYPTPROV; dwKeySpec: DWORD;
pszPrivateKeyObjId: LPSTR; dwFlags: DWORD; pvAuxInfo: Pointer;
var pPrivateKeyInfo: CRYPT_PRIVATE_KEY_INFO; var pcbPrivateKeyBlob: DWORD): BOOL; stdcall;
{$EXTERNALSYM PFN_EXPORT_PRIV_KEY_FUNC}
PfnExportPrivKeyFunc = PFN_EXPORT_PRIV_KEY_FUNC;
const
CRYPT_OID_EXPORT_PRIVATE_KEY_INFO_FUNC = 'CryptDllExportPrivateKeyInfoEx';
{$EXTERNALSYM CRYPT_OID_EXPORT_PRIVATE_KEY_INFO_FUNC}
CRYPT_DELETE_KEYSET = $0001;
{$EXTERNALSYM CRYPT_DELETE_KEYSET}
//+-------------------------------------------------------------------------
// CryptExportPKCS8 -- superseded by CryptExportPKCS8Ex
//
// Export the private key in PKCS8 format
//--------------------------------------------------------------------------
function CryptExportPKCS8(hCryptProv: HCRYPTPROV; dwKeySpec: DWORD;
pszPrivateKeyObjId: LPSTR; dwFlags: DWORD; pvAuxInfo: Pointer;
pbPrivateKeyBlob: LPBYTE; var pcbPrivateKeyBlob: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptExportPKCS8}
//+-------------------------------------------------------------------------
// CryptExportPKCS8Ex
//
// Export the private key in PKCS8 format
//
//
// Uses the pszPrivateKeyObjId to call the
// installable CRYPT_OID_EXPORT_PRIVATE_KEY_INFO_FUNC. The called function
// has the signature defined by PFN_EXPORT_PRIV_KEY_FUNC.
//
// If unable to find an installable OID function for the pszPrivateKeyObjId,
// attempts to export as a RSA Private Key (szOID_RSA_RSA).
//
// psExportParams - specifies information about the key to export
// dwFlags - The flag values. None currently supported
// pvAuxInfo - This parameter is reserved for future use and should be set to
// NULL in the interim.
// pbPrivateKeyBlob - A pointer to the private key blob. It will be encoded
// as a PKCS8 PrivateKeyInfo.
// pcbPrivateKeyBlob - A pointer to a DWORD that contains the size, in bytes,
// of the private key blob being exported.
//+-------------------------------------------------------------------------
function CryptExportPKCS8Ex(psExportParams: PCRYPT_PKCS8_EXPORT_PARAMS;
dwFlags: DWORD; pvAuxInfo: Pointer; pbPrivateKeyBlob: LPBYTE;
var pcbPrivateKeyBlob: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptExportPKCS8Ex}
//+-------------------------------------------------------------------------
// Compute the hash of the encoded public key info.
//
// The public key info is encoded and then hashed.
//--------------------------------------------------------------------------
function CryptHashPublicKeyInfo(hCryptProv: HCRYPTPROV; Algid: ALG_ID;
dwFlags: DWORD; dwCertEncodingType: DWORD; pInfo: PCERT_PUBLIC_KEY_INFO;
pbComputedHash: LPBYTE; var pcbComputedHash: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptHashPublicKeyInfo}
//+-------------------------------------------------------------------------
// Convert a Name Value to a null terminated char string
//
// Returns the number of characters converted including the terminating null
// character. If psz is NULL or csz is 0, returns the required size of the
// destination string (including the terminating null char).
//
// If psz != NULL && csz != 0, returned psz is always NULL terminated.
//
// Note: csz includes the NULL char.
//--------------------------------------------------------------------------
function CertRDNValueToStrA(dwValueType: DWORD; pValue: PCERT_RDN_VALUE_BLOB;
psz: LPSTR; csz: DWORD): DWORD; stdcall;
{$EXTERNALSYM CertRDNValueToStrA}
//+-------------------------------------------------------------------------
// Convert a Name Value to a null terminated char string
//
// Returns the number of characters converted including the terminating null
// character. If psz is NULL or csz is 0, returns the required size of the
// destination string (including the terminating null char).
//
// If psz != NULL && csz != 0, returned psz is always NULL terminated.
//
// Note: csz includes the NULL char.
//--------------------------------------------------------------------------
function CertRDNValueToStrW(dwValueType: DWORD; pValue: PCERT_RDN_VALUE_BLOB;
psz: LPWSTR; csz: DWORD): DWORD; stdcall;
{$EXTERNALSYM CertRDNValueToStrW}
function CertRDNValueToStr(dwValueType: DWORD; pValue: PCERT_RDN_VALUE_BLOB;
psz: LPTSTR; csz: DWORD): DWORD; stdcall;
{$EXTERNALSYM CertRDNValueToStr}
//+-------------------------------------------------------------------------
// Convert the certificate name blob to a null terminated char string.
//
// Follows the string representation of distinguished names specified in
// RFC 1779. (Note, added double quoting "" for embedded quotes, quote
// empty strings and don't quote strings containing consecutive spaces).
// RDN values of type CERT_RDN_ENCODED_BLOB or CERT_RDN_OCTET_STRING are
// formatted in hexadecimal (e.g. #0A56CF).
//
// The name string is formatted according to the dwStrType:
// CERT_SIMPLE_NAME_STR
// The object identifiers are discarded. CERT_RDN entries are separated
// by ", ". Multiple attributes per CERT_RDN are separated by " + ".
// For example:
// Microsoft, Joe Cool + Programmer
// CERT_OID_NAME_STR
// The object identifiers are included with a "=" separator from their
// attribute value. CERT_RDN entries are separated by ", ".
// Multiple attributes per CERT_RDN are separated by " + ". For example:
// 2.5.4.11=Microsoft, 2.5.4.3=Joe Cool + 2.5.4.12=Programmer
// CERT_X500_NAME_STR
// The object identifiers are converted to their X500 key name. Otherwise,
// same as CERT_OID_NAME_STR. If the object identifier doesn't have
// a corresponding X500 key name, then, the object identifier is used with
// a "OID." prefix. For example:
// OU=Microsoft, CN=Joe Cool + T=Programmer, OID.1.2.3.4.5.6=Unknown
//
// We quote the RDN value if it contains leading or trailing whitespace
// or one of the following characters: ",", "+", "=", """, "\n", "<", ">",
// "#" or ";". The quoting character is ". If the the RDN Value contains
// a " it is double quoted (""). For example:
// OU=" Microsoft", CN="Joe ""Cool""" + T="Programmer, Manager"
//
// CERT_NAME_STR_SEMICOLON_FLAG can be or'ed into dwStrType to replace
// the ", " separator with a "; " separator.
//
// CERT_NAME_STR_CRLF_FLAG can be or'ed into dwStrType to replace
// the ", " separator with a "\r\n" separator.
//
// CERT_NAME_STR_NO_PLUS_FLAG can be or'ed into dwStrType to replace the
// " + " separator with a single space, " ".
//
// CERT_NAME_STR_NO_QUOTING_FLAG can be or'ed into dwStrType to inhibit
// the above quoting.
//
// CERT_NAME_STR_REVERSE_FLAG can be or'ed into dwStrType to reverse the
// order of the RDNs before converting to the string.
//
// By default, CERT_RDN_T61_STRING encoded values are initially decoded
// as UTF8. If the UTF8 decoding fails, then, decoded as 8 bit characters.
// CERT_NAME_STR_DISABLE_IE4_UTF8_FLAG can be or'ed into dwStrType to
// skip the initial attempt to decode as UTF8.
//
// Returns the number of characters converted including the terminating null
// character. If psz is NULL or csz is 0, returns the required size of the
// destination string (including the terminating null char).
//
// If psz != NULL && csz != 0, returned psz is always NULL terminated.
//
// Note: csz includes the NULL char.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
//--------------------------------------------------------------------------
function CertNameToStrA(dwCertEncodingType: DWORD; pName: PCERT_NAME_BLOB;
dwStrType: DWORD; psz: LPSTR; csz: DWORD): DWORD; stdcall;
{$EXTERNALSYM CertNameToStrA}
//+-------------------------------------------------------------------------
//--------------------------------------------------------------------------
function CertNameToStrW(dwCertEncodingType: DWORD; pName: PCERT_NAME_BLOB;
dwStrType: DWORD; psz: LPWSTR; csz: DWORD): DWORD; stdcall;
{$EXTERNALSYM CertNameToStrW}
function CertNameToStr(dwCertEncodingType: DWORD; pName: PCERT_NAME_BLOB;
dwStrType: DWORD; psz: LPTSTR; csz: DWORD): DWORD; stdcall;
{$EXTERNALSYM CertNameToStr}
//+-------------------------------------------------------------------------
// Certificate name string types
//--------------------------------------------------------------------------
const
CERT_SIMPLE_NAME_STR = 1;
{$EXTERNALSYM CERT_SIMPLE_NAME_STR}
CERT_OID_NAME_STR = 2;
{$EXTERNALSYM CERT_OID_NAME_STR}
CERT_X500_NAME_STR = 3;
{$EXTERNALSYM CERT_X500_NAME_STR}
//+-------------------------------------------------------------------------
// Certificate name string type flags OR'ed with the above types
//--------------------------------------------------------------------------
CERT_NAME_STR_SEMICOLON_FLAG = $40000000;
{$EXTERNALSYM CERT_NAME_STR_SEMICOLON_FLAG}
CERT_NAME_STR_NO_PLUS_FLAG = $20000000;
{$EXTERNALSYM CERT_NAME_STR_NO_PLUS_FLAG}
CERT_NAME_STR_NO_QUOTING_FLAG = $10000000;
{$EXTERNALSYM CERT_NAME_STR_NO_QUOTING_FLAG}
CERT_NAME_STR_CRLF_FLAG = $08000000;
{$EXTERNALSYM CERT_NAME_STR_CRLF_FLAG}
CERT_NAME_STR_COMMA_FLAG = $04000000;
{$EXTERNALSYM CERT_NAME_STR_COMMA_FLAG}
CERT_NAME_STR_REVERSE_FLAG = $02000000;
{$EXTERNALSYM CERT_NAME_STR_REVERSE_FLAG}
CERT_NAME_STR_DISABLE_IE4_UTF8_FLAG = $00010000;
{$EXTERNALSYM CERT_NAME_STR_DISABLE_IE4_UTF8_FLAG}
CERT_NAME_STR_ENABLE_T61_UNICODE_FLAG = $00020000;
{$EXTERNALSYM CERT_NAME_STR_ENABLE_T61_UNICODE_FLAG}
CERT_NAME_STR_ENABLE_UTF8_UNICODE_FLAG = $00040000;
{$EXTERNALSYM CERT_NAME_STR_ENABLE_UTF8_UNICODE_FLAG}
//+-------------------------------------------------------------------------
// Convert the null terminated X500 string to an encoded certificate name.
//
// The input string is expected to be formatted the same as the output
// from the above CertNameToStr API.
//
// The CERT_SIMPLE_NAME_STR type isn't supported. Otherwise, when dwStrType
// is set to 0, CERT_OID_NAME_STR or CERT_X500_NAME_STR, allow either a
// case insensitive X500 key (CN=), case insensitive "OID." prefixed
// object identifier (OID.1.2.3.4.5.6=) or an object identifier (1.2.3.4=).
//
// If no flags are OR'ed into dwStrType, then, allow "," or ";" as RDN
// separators and "+" as the multiple RDN value separator. Quoting is
// supported. A quote may be included in a quoted value by double quoting,
// for example (CN="Joe ""Cool"""). A value starting with a "#" is treated
// as ascii hex and converted to a CERT_RDN_OCTET_STRING. Embedded whitespace
// is skipped (1.2.3 = # AB CD 01 is the same as 1.2.3=#ABCD01).
//
// Whitespace surrounding the keys, object identifers and values is removed.
//
// CERT_NAME_STR_COMMA_FLAG can be or'ed into dwStrType to only allow the
// "," as the RDN separator.
//
// CERT_NAME_STR_SEMICOLON_FLAG can be or'ed into dwStrType to only allow the
// ";" as the RDN separator.
//
// CERT_NAME_STR_CRLF_FLAG can be or'ed into dwStrType to only allow
// "\r" or "\n" as the RDN separator.
//
// CERT_NAME_STR_NO_PLUS_FLAG can be or'ed into dwStrType to ignore "+"
// as a separator and not allow multiple values per RDN.
//
// CERT_NAME_STR_NO_QUOTING_FLAG can be or'ed into dwStrType to inhibit
// quoting.
//
// CERT_NAME_STR_REVERSE_FLAG can be or'ed into dwStrType to reverse the
// order of the RDNs after converting from the string and before encoding.
//
// CERT_NAME_STR_ENABLE_T61_UNICODE_FLAG can be or'ed into dwStrType to
// to select the CERT_RDN_T61_STRING encoded value type instead of
// CERT_RDN_UNICODE_STRING if all the UNICODE characters are <= 0xFF.
//
// CERT_NAME_STR_ENABLE_UTF8_UNICODE_FLAG can be or'ed into dwStrType to
// to select the CERT_RDN_UTF8_STRING encoded value type instead of
// CERT_RDN_UNICODE_STRING.
//
// Support the following X500 Keys:
//
// Key Object Identifier RDN Value Type(s)
// --- ----------------- -----------------
// CN szOID_COMMON_NAME Printable, Unicode
// L szOID_LOCALITY_NAME Printable, Unicode
// O szOID_ORGANIZATION_NAME Printable, Unicode
// OU szOID_ORGANIZATIONAL_UNIT_NAME Printable, Unicode
// E szOID_RSA_emailAddr Only IA5
// Email szOID_RSA_emailAddr Only IA5
// C szOID_COUNTRY_NAME Only Printable
// S szOID_STATE_OR_PROVINCE_NAME Printable, Unicode
// ST szOID_STATE_OR_PROVINCE_NAME Printable, Unicode
// STREET szOID_STREET_ADDRESS Printable, Unicode
// T szOID_TITLE Printable, Unicode
// Title szOID_TITLE Printable, Unicode
// G szOID_GIVEN_NAME Printable, Unicode
// GivenName szOID_GIVEN_NAME Printable, Unicode
// I szOID_INITIALS Printable, Unicode
// Initials szOID_INITIALS Printable, Unicode
// SN szOID_SUR_NAME Printable, Unicode
// DC szOID_DOMAIN_COMPONENT IA5, UTF8
//
// Note, T61 is selected instead of Unicode if
// CERT_NAME_STR_ENABLE_T61_UNICODE_FLAG is set and all the unicode
// characters are <= 0xFF.
//
// Note, UTF8 is selected instead of Unicode if
// CERT_NAME_STR_ENABLE_UTF8_UNICODE_FLAG is set.
//
// Returns TRUE if successfully parsed the input string and encoded
// the name.
//
// If the input string is detected to be invalid, *ppszError is updated
// to point to the beginning of the invalid character sequence. Otherwise,
// *ppszError is set to NULL. *ppszError is updated with a non-NULL pointer
// for the following errors:
// CRYPT_E_INVALID_X500_STRING
// CRYPT_E_INVALID_NUMERIC_STRING
// CRYPT_E_INVALID_PRINTABLE_STRING
// CRYPT_E_INVALID_IA5_STRING
//
// ppszError can be set to NULL if not interested in getting a pointer
// to the invalid character sequence.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
//--------------------------------------------------------------------------
function CertStrToNameA(dwCertEncodingType: DWORD; pszX500: LPCSTR;
dwStrType: DWORD; pvReserved: Pointer; pbEncoded: LPBYTE; var pcbEncoded: DWORD;
ppszError: LPLPCSTR): BOOL; stdcall;
{$EXTERNALSYM CertStrToNameA}
function CertStrToNameW(dwCertEncodingType: DWORD; pszX500: LPCWSTR;
dwStrType: DWORD; pvReserved: Pointer; pbEncoded: LPBYTE; var pcbEncoded: DWORD;
ppszError: LPLPCWSTR): BOOL; stdcall;
{$EXTERNALSYM CertStrToNameW}
function CertStrToName(dwCertEncodingType: DWORD; pszX500: LPCTSTR;
dwStrType: DWORD; pvReserved: Pointer; pbEncoded: LPBYTE; var pcbEncoded: DWORD;
ppszError: LPLPCTSTR): BOOL; stdcall;
{$EXTERNALSYM CertStrToName}
//+-------------------------------------------------------------------------
// Get the subject or issuer name from the certificate and
// according to the specified format type, convert to a null terminated
// character string.
//
// CERT_NAME_ISSUER_FLAG can be set to get the issuer's name. Otherwise,
// gets the subject's name.
//
// By default, CERT_RDN_T61_STRING encoded values are initially decoded
// as UTF8. If the UTF8 decoding fails, then, decoded as 8 bit characters.
// CERT_NAME_DISABLE_IE4_UTF8_FLAG can be set in dwFlags to
// skip the initial attempt to decode as UTF8.
//
// The name string is formatted according to the dwType:
// CERT_NAME_EMAIL_TYPE
// If the certificate has a Subject Alternative Name extension (for
// issuer, Issuer Alternative Name), searches for first rfc822Name choice.
// If the rfc822Name choice isn't found in the extension, searches the
// Subject Name field for the Email OID, "1.2.840.113549.1.9.1".
// If the rfc822Name or Email OID is found, returns the string. Otherwise,
// returns an empty string (returned character count is 1).
// CERT_NAME_RDN_TYPE
// Converts the Subject Name blob by calling CertNameToStr. pvTypePara
// points to a DWORD containing the dwStrType passed to CertNameToStr.
// If the Subject Name field is empty and the certificate has a
// Subject Alternative Name extension, searches for and converts
// the first directoryName choice.
// CERT_NAME_ATTR_TYPE
// pvTypePara points to the Object Identifier specifying the name attribute
// to be returned. For example, to get the CN,
// pvTypePara = szOID_COMMON_NAME ("2.5.4.3"). Searches, the Subject Name
// field for the attribute.
// If the Subject Name field is empty and the certificate has a
// Subject Alternative Name extension, checks for
// the first directoryName choice and searches it.
//
// Note, searches the RDNs in reverse order.
//
// CERT_NAME_SIMPLE_DISPLAY_TYPE
// Iterates through the following list of name attributes and searches
// the Subject Name and then the Subject Alternative Name extension
// for the first occurrence of:
// szOID_COMMON_NAME ("2.5.4.3")
// szOID_ORGANIZATIONAL_UNIT_NAME ("2.5.4.11")
// szOID_ORGANIZATION_NAME ("2.5.4.10")
// szOID_RSA_emailAddr ("1.2.840.113549.1.9.1")
//
// If none of the above attributes is found, then, searches the
// Subject Alternative Name extension for a rfc822Name choice.
//
// If still no match, then, returns the first attribute.
//
// Note, like CERT_NAME_ATTR_TYPE, searches the RDNs in reverse order.
//
// CERT_NAME_FRIENDLY_DISPLAY_TYPE
// First checks if the certificate has a CERT_FRIENDLY_NAME_PROP_ID
// property. If it does, then, this property is returned. Otherwise,
// returns the above CERT_NAME_SIMPLE_DISPLAY_TYPE.
//
// Returns the number of characters converted including the terminating null
// character. If pwszNameString is NULL or cchNameString is 0, returns the
// required size of the destination string (including the terminating null
// char). If the specified name type isn't found. returns an empty string
// with a returned character count of 1.
//
// If pwszNameString != NULL && cwszNameString != 0, returned pwszNameString
// is always NULL terminated.
//
// Note: cchNameString includes the NULL char.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
//--------------------------------------------------------------------------
function CertGetNameStringA(pCertContext: PCCERT_CONTEXT; dwType, dwFlags: DWORD;
pvTypePara: Pointer; pszNameString: LPSTR; cchNameString: DWORD): DWORD; stdcall;
{$EXTERNALSYM CertGetNameStringA}
function CertGetNameStringW(pCertContext: PCCERT_CONTEXT; dwType, dwFlags: DWORD;
pvTypePara: Pointer; pszNameString: LPWSTR; cchNameString: DWORD): DWORD; stdcall;
{$EXTERNALSYM CertGetNameStringW}
function CertGetNameString(pCertContext: PCCERT_CONTEXT; dwType, dwFlags: DWORD;
pvTypePara: Pointer; pszNameString: LPTSTR; cchNameString: DWORD): DWORD; stdcall;
{$EXTERNALSYM CertGetNameString}
//+-------------------------------------------------------------------------
// Certificate name types
//--------------------------------------------------------------------------
const
CERT_NAME_EMAIL_TYPE = 1;
{$EXTERNALSYM CERT_NAME_EMAIL_TYPE}
CERT_NAME_RDN_TYPE = 2;
{$EXTERNALSYM CERT_NAME_RDN_TYPE}
CERT_NAME_ATTR_TYPE = 3;
{$EXTERNALSYM CERT_NAME_ATTR_TYPE}
CERT_NAME_SIMPLE_DISPLAY_TYPE = 4;
{$EXTERNALSYM CERT_NAME_SIMPLE_DISPLAY_TYPE}
CERT_NAME_FRIENDLY_DISPLAY_TYPE = 5;
{$EXTERNALSYM CERT_NAME_FRIENDLY_DISPLAY_TYPE}
//+-------------------------------------------------------------------------
// Certificate name flags
//--------------------------------------------------------------------------
CERT_NAME_ISSUER_FLAG = $1;
{$EXTERNALSYM CERT_NAME_ISSUER_FLAG}
CERT_NAME_DISABLE_IE4_UTF8_FLAG = $00010000;
{$EXTERNALSYM CERT_NAME_DISABLE_IE4_UTF8_FLAG}
//+=========================================================================
// Simplified Cryptographic Message Data Structures and APIs
//==========================================================================
//+-------------------------------------------------------------------------
// Conventions for the *pb and *pcb output parameters:
//
// Upon entry to the function:
// if pcb is OPTIONAL && pcb == NULL, then,
// No output is returned
// else if pb == NULL && pcb != NULL, then,
// Length only determination. No length error is
// returned.
// otherwise where (pb != NULL && pcb != NULL && *pcb != 0)
// Output is returned. If *pcb isn't big enough a
// length error is returned. In all cases *pcb is updated
// with the actual length needed/returned.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// Type definitions of the parameters used for doing the cryptographic
// operations.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// Callback to get and verify the signer's certificate.
//
// Passed the CertId of the signer (its Issuer and SerialNumber) and a
// handle to its cryptographic signed message's cert store.
//
// For CRYPT_E_NO_SIGNER, called with pSignerId == NULL.
//
// For a valid signer certificate, returns a pointer to a read only
// CERT_CONTEXT. The returned CERT_CONTEXT is either obtained from a
// cert store or was created via CertCreateCertificateContext. For either case,
// its freed via CertFreeCertificateContext.
//
// If a valid certificate isn't found, this callback returns NULL with
// LastError set via SetLastError().
//
// The NULL implementation tries to get the Signer certificate from the
// message cert store. It doesn't verify the certificate.
//
// Note, if the KEYID choice was selected for a CMS SignerId, then, the
// SerialNumber is 0 and the Issuer is encoded containing a single RDN with a
// single Attribute whose OID is szOID_KEYID_RDN, value type is
// CERT_RDN_OCTET_STRING and value is the KEYID. When the
// CertGetSubjectCertificateFromStore and
// CertFindCertificateInStore(CERT_FIND_SUBJECT_CERT) APIs see this
// special KEYID Issuer and SerialNumber, they do a KEYID match.
//--------------------------------------------------------------------------
type
PFN_CRYPT_GET_SIGNER_CERTIFICATE = function(pvGetArg: Pointer;
dwCertEncodingType: DWORD; pSignerId: PCERT_INFO;
hMsgCertStore: HCERTSTORE): PCCERT_CONTEXT; stdcall;
{$EXTERNALSYM PFN_CRYPT_GET_SIGNER_CERTIFICATE}
PfnCryptGetSignerCertificate = PFN_CRYPT_GET_SIGNER_CERTIFICATE;
//+-------------------------------------------------------------------------
// The CRYPT_SIGN_MESSAGE_PARA are used for signing messages using the
// specified signing certificate context.
//
// Either the CERT_KEY_PROV_HANDLE_PROP_ID or CERT_KEY_PROV_INFO_PROP_ID must
// be set for each rgpSigningCert[]. Either one specifies the private
// signature key to use.
//
// If any certificates and/or CRLs are to be included in the signed message,
// then, the MsgCert and MsgCrl parameters need to be updated. If the
// rgpSigningCerts are to be included, then, they must also be in the
// rgpMsgCert array.
//
// cbSize must be set to the sizeof(CRYPT_SIGN_MESSAGE_PARA) or else
// LastError will be updated with E_INVALIDARG.
//
// pvHashAuxInfo currently isn't used and must be set to NULL.
//
// dwFlags normally is set to 0. However, if the encoded output
// is to be a CMSG_SIGNED inner content of an outer cryptographic message,
// such as a CMSG_ENVELOPED, then, the CRYPT_MESSAGE_BARE_CONTENT_OUT_FLAG
// should be set. If not set, then it would be encoded as an inner content
// type of CMSG_DATA.
//
// dwInnerContentType is normally set to 0. It needs to be set if the
// ToBeSigned input is the encoded output of another cryptographic
// message, such as, an CMSG_ENVELOPED. When set, it's one of the cryptographic
// message types, for example, CMSG_ENVELOPED.
//
// If the inner content of a nested cryptographic message is data (CMSG_DATA
// the default), then, neither dwFlags or dwInnerContentType need to be set.
//
// For CMS messages, CRYPT_MESSAGE_ENCAPSULATED_CONTENT_OUT_FLAG may be
// set to encapsulate nonData inner content within an OCTET STRING.
//
// For CMS messages, CRYPT_MESSAGE_KEYID_SIGNER_FLAG may be set to identify
// signers by their Key Identifier and not their Issuer and Serial Number.
//
// If HashEncryptionAlgorithm is present and not NULL its used instead of
// the SigningCert's PublicKeyInfo.Algorithm.
//
// Note, for RSA, the hash encryption algorithm is normally the same as
// the public key algorithm. For DSA, the hash encryption algorithm is
// normally a DSS signature algorithm.
//
// pvHashEncryptionAuxInfo currently isn't used and must be set to NULL if
// present in the data structure.
//--------------------------------------------------------------------------
type
PCRYPT_SIGN_MESSAGE_PARA = ^CRYPT_SIGN_MESSAGE_PARA;
{$EXTERNALSYM PCRYPT_SIGN_MESSAGE_PARA}
_CRYPT_SIGN_MESSAGE_PARA = record
cbSize: DWORD;
dwMsgEncodingType: DWORD;
pSigningCert: PCCERT_CONTEXT;
HashAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
pvHashAuxInfo: Pointer;
cMsgCert: DWORD;
rgpMsgCert: PPCCERT_CONTEXT;
cMsgCrl: DWORD;
rgpMsgCrl: PPCCRL_CONTEXT;
cAuthAttr: DWORD;
rgAuthAttr: PCRYPT_ATTRIBUTE;
cUnauthAttr: DWORD;
rgUnauthAttr: PCRYPT_ATTRIBUTE;
dwFlags: DWORD;
dwInnerContentType: DWORD;
{$IFDEF CRYPT_SIGN_MESSAGE_PARA_HAS_CMS_FIELDS}
HashEncryptionAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
pvHashEncryptionAuxInfo: Pointer;
{$ENDIF CRYPT_SIGN_MESSAGE_PARA_HAS_CMS_FIELDS}
end;
{$EXTERNALSYM _CRYPT_SIGN_MESSAGE_PARA}
CRYPT_SIGN_MESSAGE_PARA = _CRYPT_SIGN_MESSAGE_PARA;
{$EXTERNALSYM CRYPT_SIGN_MESSAGE_PARA}
TCryptSignMessagePara = CRYPT_SIGN_MESSAGE_PARA;
PCryptSignMessagePara = PCRYPT_SIGN_MESSAGE_PARA;
const
CRYPT_MESSAGE_BARE_CONTENT_OUT_FLAG = $1;
{$EXTERNALSYM CRYPT_MESSAGE_BARE_CONTENT_OUT_FLAG}
// When set, nonData type inner content is encapsulated within an
// OCTET STRING
CRYPT_MESSAGE_ENCAPSULATED_CONTENT_OUT_FLAG = $2;
{$EXTERNALSYM CRYPT_MESSAGE_ENCAPSULATED_CONTENT_OUT_FLAG}
// When set, signers are identified by their Key Identifier and not
// their Issuer and Serial Number.
CRYPT_MESSAGE_KEYID_SIGNER_FLAG = $4;
{$EXTERNALSYM CRYPT_MESSAGE_KEYID_SIGNER_FLAG}
//+-------------------------------------------------------------------------
// The CRYPT_VERIFY_MESSAGE_PARA are used to verify signed messages.
//
// hCryptProv is used to do hashing and signature verification.
//
// The dwCertEncodingType specifies the encoding type of the certificates
// and/or CRLs in the message.
//
// pfnGetSignerCertificate is called to get and verify the message signer's
// certificate.
//
// cbSize must be set to the sizeof(CRYPT_VERIFY_MESSAGE_PARA) or else
// LastError will be updated with E_INVALIDARG.
//--------------------------------------------------------------------------
type
PCRYPT_VERIFY_MESSAGE_PARA = ^CRYPT_VERIFY_MESSAGE_PARA;
{$EXTERNALSYM PCRYPT_VERIFY_MESSAGE_PARA}
_CRYPT_VERIFY_MESSAGE_PARA = record
cbSize: DWORD;
dwMsgAndCertEncodingType: DWORD;
hCryptProv: HCRYPTPROV;
pfnGetSignerCertificate: PFN_CRYPT_GET_SIGNER_CERTIFICATE;
pvGetArg: Pointer;
end;
{$EXTERNALSYM _CRYPT_VERIFY_MESSAGE_PARA}
CRYPT_VERIFY_MESSAGE_PARA = _CRYPT_VERIFY_MESSAGE_PARA;
{$EXTERNALSYM CRYPT_VERIFY_MESSAGE_PARA}
TCryptVerifyMessagePara = CRYPT_VERIFY_MESSAGE_PARA;
PCryptVerifyMessagePara = PCRYPT_VERIFY_MESSAGE_PARA;
//+-------------------------------------------------------------------------
// The CRYPT_ENCRYPT_MESSAGE_PARA are used for encrypting messages.
//
// hCryptProv is used to do content encryption, recipient key
// encryption, and recipient key export. Its private key
// isn't used.
//
// Currently, pvEncryptionAuxInfo is only defined for RC2 or RC4 encryption
// algorithms. Otherwise, its not used and must be set to NULL.
// See CMSG_RC2_AUX_INFO for the RC2 encryption algorithms.
// See CMSG_RC4_AUX_INFO for the RC4 encryption algorithms.
//
// To enable SP3 compatible encryption, pvEncryptionAuxInfo should point to
// a CMSG_SP3_COMPATIBLE_AUX_INFO data structure.
//
// cbSize must be set to the sizeof(CRYPT_ENCRYPT_MESSAGE_PARA) or else
// LastError will be updated with E_INVALIDARG.
//
// dwFlags normally is set to 0. However, if the encoded output
// is to be a CMSG_ENVELOPED inner content of an outer cryptographic message,
// such as a CMSG_SIGNED, then, the CRYPT_MESSAGE_BARE_CONTENT_OUT_FLAG
// should be set. If not set, then it would be encoded as an inner content
// type of CMSG_DATA.
//
// dwInnerContentType is normally set to 0. It needs to be set if the
// ToBeEncrypted input is the encoded output of another cryptographic
// message, such as, an CMSG_SIGNED. When set, it's one of the cryptographic
// message types, for example, CMSG_SIGNED.
//
// If the inner content of a nested cryptographic message is data (CMSG_DATA
// the default), then, neither dwFlags or dwInnerContentType need to be set.
//
// For CMS messages, CRYPT_MESSAGE_ENCAPSULATED_CONTENT_OUT_FLAG may be
// set to encapsulate nonData inner content within an OCTET STRING before
// encrypting.
//
// For CMS messages, CRYPT_MESSAGE_KEYID_RECIPIENT_FLAG may be set to identify
// recipients by their Key Identifier and not their Issuer and Serial Number.
//--------------------------------------------------------------------------
type
PCRYPT_ENCRYPT_MESSAGE_PARA = ^CRYPT_ENCRYPT_MESSAGE_PARA;
{$EXTERNALSYM PCRYPT_ENCRYPT_MESSAGE_PARA}
_CRYPT_ENCRYPT_MESSAGE_PARA = record
cbSize: DWORD;
dwMsgEncodingType: DWORD;
hCryptProv: HCRYPTPROV;
ContentEncryptionAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
pvEncryptionAuxInfo: Pointer;
dwFlags: DWORD;
dwInnerContentType: DWORD;
end;
{$EXTERNALSYM _CRYPT_ENCRYPT_MESSAGE_PARA}
CRYPT_ENCRYPT_MESSAGE_PARA = _CRYPT_ENCRYPT_MESSAGE_PARA;
{$EXTERNALSYM CRYPT_ENCRYPT_MESSAGE_PARA}
TCryptEncryptMessagePara = CRYPT_ENCRYPT_MESSAGE_PARA;
PCryptEncryptMessagePara = PCRYPT_ENCRYPT_MESSAGE_PARA;
// When set, recipients are identified by their Key Identifier and not
// their Issuer and Serial Number.
const
CRYPT_MESSAGE_KEYID_RECIPIENT_FLAG = $4;
{$EXTERNALSYM CRYPT_MESSAGE_KEYID_RECIPIENT_FLAG}
//+-------------------------------------------------------------------------
// The CRYPT_DECRYPT_MESSAGE_PARA are used for decrypting messages.
//
// The CertContext to use for decrypting a message is obtained from one
// of the specified cert stores. An encrypted message can have one or
// more recipients. The recipients are identified by their CertId (Issuer
// and SerialNumber). The cert stores are searched to find the CertContext
// corresponding to the CertId.
//
// For CMS, the recipients may also be identified by their KeyId.
// CMS also allows Key Agreement (Diffie Hellman) in addition to
// Key Transport (RSA) recipients.
//
// Only CertContexts in the store with either
// the CERT_KEY_PROV_HANDLE_PROP_ID or CERT_KEY_PROV_INFO_PROP_ID set
// can be used. Either property specifies the private exchange key to use.
//
// cbSize must be set to the sizeof(CRYPT_DECRYPT_MESSAGE_PARA) or else
// LastError will be updated with E_INVALIDARG.
//--------------------------------------------------------------------------
type
PCRYPT_DECRYPT_MESSAGE_PARA = ^CRYPT_DECRYPT_MESSAGE_PARA;
{$EXTERNALSYM PCRYPT_DECRYPT_MESSAGE_PARA}
_CRYPT_DECRYPT_MESSAGE_PARA = record
cbSize: DWORD;
dwMsgAndCertEncodingType: DWORD;
cCertStore: DWORD;
rghCertStore: PHCERTSTORE;
end;
{$EXTERNALSYM _CRYPT_DECRYPT_MESSAGE_PARA}
CRYPT_DECRYPT_MESSAGE_PARA = _CRYPT_DECRYPT_MESSAGE_PARA;
{$EXTERNALSYM CRYPT_DECRYPT_MESSAGE_PARA}
TCryptDecryptMessagePara = CRYPT_DECRYPT_MESSAGE_PARA;
PCryptDecryptMessagePara = PCRYPT_DECRYPT_MESSAGE_PARA;
//+-------------------------------------------------------------------------
// The CRYPT_HASH_MESSAGE_PARA are used for hashing or unhashing
// messages.
//
// hCryptProv is used to compute the hash.
//
// pvHashAuxInfo currently isn't used and must be set to NULL.
//
// cbSize must be set to the sizeof(CRYPT_HASH_MESSAGE_PARA) or else
// LastError will be updated with E_INVALIDARG.
//--------------------------------------------------------------------------
PCRYPT_HASH_MESSAGE_PARA = ^CRYPT_HASH_MESSAGE_PARA;
{$EXTERNALSYM PCRYPT_HASH_MESSAGE_PARA}
_CRYPT_HASH_MESSAGE_PARA = record
cbSize: DWORD;
dwMsgEncodingType: DWORD;
hCryptProv: HCRYPTPROV;
HashAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
pvHashAuxInfo: Pointer;
end;
{$EXTERNALSYM _CRYPT_HASH_MESSAGE_PARA}
CRYPT_HASH_MESSAGE_PARA = _CRYPT_HASH_MESSAGE_PARA;
{$EXTERNALSYM CRYPT_HASH_MESSAGE_PARA}
TCryptHashMessagePara = CRYPT_HASH_MESSAGE_PARA;
PCryptHashMessagePara = PCRYPT_HASH_MESSAGE_PARA;
//+-------------------------------------------------------------------------
// The CRYPT_KEY_SIGN_MESSAGE_PARA are used for signing messages until a
// certificate has been created for the signature key.
//
// pvHashAuxInfo currently isn't used and must be set to NULL.
//
// If PubKeyAlgorithm isn't set, defaults to szOID_RSA_RSA.
//
// cbSize must be set to the sizeof(CRYPT_KEY_SIGN_MESSAGE_PARA) or else
// LastError will be updated with E_INVALIDARG.
//--------------------------------------------------------------------------
PCRYPT_KEY_SIGN_MESSAGE_PARA = ^CRYPT_KEY_SIGN_MESSAGE_PARA;
{$EXTERNALSYM PCRYPT_KEY_SIGN_MESSAGE_PARA}
_CRYPT_KEY_SIGN_MESSAGE_PARA = record
cbSize: DWORD;
dwMsgAndCertEncodingType: DWORD;
hCryptProv: HCRYPTPROV;
dwKeySpec: DWORD;
HashAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
pvHashAuxInfo: Pointer;
PubKeyAlgorithm: CRYPT_ALGORITHM_IDENTIFIER;
end;
{$EXTERNALSYM _CRYPT_KEY_SIGN_MESSAGE_PARA}
CRYPT_KEY_SIGN_MESSAGE_PARA = _CRYPT_KEY_SIGN_MESSAGE_PARA;
{$EXTERNALSYM CRYPT_KEY_SIGN_MESSAGE_PARA}
TCryptKeySignMessagePara = CRYPT_KEY_SIGN_MESSAGE_PARA;
PCryptKeySignMessagePara = PCRYPT_KEY_SIGN_MESSAGE_PARA;
//+-------------------------------------------------------------------------
// The CRYPT_KEY_VERIFY_MESSAGE_PARA are used to verify signed messages without
// a certificate for the signer.
//
// Normally used until a certificate has been created for the key.
//
// hCryptProv is used to do hashing and signature verification.
//
// cbSize must be set to the sizeof(CRYPT_KEY_VERIFY_MESSAGE_PARA) or else
// LastError will be updated with E_INVALIDARG.
//--------------------------------------------------------------------------
PCRYPT_KEY_VERIFY_MESSAGE_PARA = ^CRYPT_KEY_VERIFY_MESSAGE_PARA;
{$EXTERNALSYM PCRYPT_KEY_VERIFY_MESSAGE_PARA}
_CRYPT_KEY_VERIFY_MESSAGE_PARA = record
cbSize: DWORD;
dwMsgEncodingType: DWORD;
hCryptProv: HCRYPTPROV;
end;
{$EXTERNALSYM _CRYPT_KEY_VERIFY_MESSAGE_PARA}
CRYPT_KEY_VERIFY_MESSAGE_PARA = _CRYPT_KEY_VERIFY_MESSAGE_PARA;
{$EXTERNALSYM CRYPT_KEY_VERIFY_MESSAGE_PARA}
TCryptKeyVerifyMessagePara = CRYPT_KEY_VERIFY_MESSAGE_PARA;
PCryptKeyVerifyMessagePara = PCRYPT_KEY_VERIFY_MESSAGE_PARA;
//+-------------------------------------------------------------------------
// Sign the message.
//
// If fDetachedSignature is TRUE, the "to be signed" content isn't included
// in the encoded signed blob.
//--------------------------------------------------------------------------
function CryptSignMessage(pSignPara: PCRYPT_SIGN_MESSAGE_PARA;
fDetachedSignature: BOOL; cToBeSigned: DWORD; rgpbToBeSigned: LPBYTE;
rgcbToBeSigned: LPDWORD; pbSignedBlob: LPBYTE; var pcbSignedBlob: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptSignMessage}
//+-------------------------------------------------------------------------
// Verify a signed message.
//
// If pbDecoded == NULL, then, *pcbDecoded is implicitly set to 0 on input.
// For *pcbDecoded == 0 && ppSignerCert == NULL on input, the signer isn't
// verified.
//
// A message might have more than one signer. Set dwSignerIndex to iterate
// through all the signers. dwSignerIndex == 0 selects the first signer.
//
// pVerifyPara's pfnGetSignerCertificate is called to get the signer's
// certificate.
//
// For a verified signer and message, *ppSignerCert is updated
// with the CertContext of the signer. It must be freed by calling
// CertFreeCertificateContext. Otherwise, *ppSignerCert is set to NULL.
//
// ppSignerCert can be NULL, indicating the caller isn't interested
// in getting the CertContext of the signer.
//
// pcbDecoded can be NULL, indicating the caller isn't interested in getting
// the decoded content. Furthermore, if the message doesn't contain any
// content or signers, then, pcbDecoded must be set to NULL, to allow the
// pVerifyPara->pfnGetCertificate to be called. Normally, this would be
// the case when the signed message contains only certficates and CRLs.
// If pcbDecoded is NULL and the message doesn't have the indicated signer,
// pfnGetCertificate is called with pSignerId set to NULL.
//
// If the message doesn't contain any signers || dwSignerIndex > message's
// SignerCount, then, an error is returned with LastError set to
// CRYPT_E_NO_SIGNER. Also, for CRYPT_E_NO_SIGNER, pfnGetSignerCertificate
// is still called with pSignerId set to NULL.
//
// Note, an alternative way to get the certificates and CRLs from a
// signed message is to call CryptGetMessageCertificates.
//--------------------------------------------------------------------------
function CryptVerifyMessageSignature(pVerifyPara: PCRYPT_VERIFY_MESSAGE_PARA;
dwSignerIndex: DWORD; pbSignedBlob: LPBYTE; cbSignedBlob: DWORD;
pbDecoded: LPBYTE; pcbDecoded: LPDWORD; ppSignerCert: PPCCERT_CONTEXT): BOOL; stdcall;
{$EXTERNALSYM CryptVerifyMessageSignature}
//+-------------------------------------------------------------------------
// Returns the count of signers in the signed message. For no signers, returns
// 0. For an error returns -1 with LastError updated accordingly.
//--------------------------------------------------------------------------
function CryptGetMessageSignerCount(dwMsgEncodingType: DWORD; pbSignedBlob: LPBYTE;
cbSignedBlob: DWORD): LONG; stdcall;
{$EXTERNALSYM CryptGetMessageSignerCount}
//+-------------------------------------------------------------------------
// Returns the cert store containing the message's certs and CRLs.
// For an error, returns NULL with LastError updated.
//--------------------------------------------------------------------------
function CryptGetMessageCertificates(dwMsgAndCertEncodingType: DWORD;
hCryptProv: HCRYPTPROV; dwFlags: DWORD; pbSignedBlob: LPBYTE;
cbSignedBlob: DWORD): HCERTSTORE; stdcall;
{$EXTERNALSYM CryptGetMessageCertificates}
//+-------------------------------------------------------------------------
// Verify a signed message containing detached signature(s).
// The "to be signed" content is passed in separately. No
// decoded output. Otherwise, identical to CryptVerifyMessageSignature.
//--------------------------------------------------------------------------
function CryptVerifyDetachedMessageSignature(pVerifyPara: PCRYPT_VERIFY_MESSAGE_PARA;
dwSignerIndex: DWORD; pbDetachedSignBlob: LPBYTE; cbDetachedSignBlob: DWORD;
cToBeSigned: DWORD; rgpbToBeSigned: LPBYTE; rgcbToBeSigned: LPDWORD;
ppSignerCert: PPCCERT_CONTEXT): BOOL; stdcall;
{$EXTERNALSYM CryptVerifyDetachedMessageSignature}
//+-------------------------------------------------------------------------
// Encrypts the message for the recipient(s).
//--------------------------------------------------------------------------
function CryptEncryptMessage(pEncryptPara: PCRYPT_ENCRYPT_MESSAGE_PARA;
cRecipientCert: DWORD; rgpRecipientCert: PCCERT_CONTEXT; pbToBeEncrypted: LPBYTE;
cbToBeEncrypted: DWORD; pbEncryptedBlob: LPBYTE; var pcbEncryptedBlob: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptEncryptMessage}
//+-------------------------------------------------------------------------
// Decrypts the message.
//
// If pbDecrypted == NULL, then, *pcbDecrypted is implicitly set to 0 on input.
// For *pcbDecrypted == 0 && ppXchgCert == NULL on input, the message isn't
// decrypted.
//
// For a successfully decrypted message, *ppXchgCert is updated
// with the CertContext used to decrypt. It must be freed by calling
// CertStoreFreeCert. Otherwise, *ppXchgCert is set to NULL.
//
// ppXchgCert can be NULL, indicating the caller isn't interested
// in getting the CertContext used to decrypt.
//--------------------------------------------------------------------------
function CryptDecryptMessage(pDecryptPara: PCRYPT_DECRYPT_MESSAGE_PARA;
pbEncryptedBlob: LPBYTE; cbEncryptedBlob: DWORD; pbDecrypted: LPBYTE;
pcbDecrypted: LPDWORD; ppXchgCert: PPCCERT_CONTEXT): BOOL; stdcall;
{$EXTERNALSYM CryptDecryptMessage}
//+-------------------------------------------------------------------------
// Sign the message and encrypt for the recipient(s). Does a CryptSignMessage
// followed with a CryptEncryptMessage.
//
// Note: this isn't the CMSG_SIGNED_AND_ENVELOPED. Its a CMSG_SIGNED
// inside of an CMSG_ENVELOPED.
//--------------------------------------------------------------------------
function CryptSignAndEncryptMessage(pSignPara: PCRYPT_SIGN_MESSAGE_PARA;
pEncryptPara: PCRYPT_ENCRYPT_MESSAGE_PARA; cRecipientCert: DWORD;
rgpRecipientCert: PCCERT_CONTEXT; pbToBeSignedAndEncrypted: LPBYTE;
cbToBeSignedAndEncrypted: DWORD; pbSignedAndEncryptedBlob: LPBYTE;
var pcbSignedAndEncryptedBlob: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptSignAndEncryptMessage}
//+-------------------------------------------------------------------------
// Decrypts the message and verifies the signer. Does a CryptDecryptMessage
// followed with a CryptVerifyMessageSignature.
//
// If pbDecrypted == NULL, then, *pcbDecrypted is implicitly set to 0 on input.
// For *pcbDecrypted == 0 && ppSignerCert == NULL on input, the signer isn't
// verified.
//
// A message might have more than one signer. Set dwSignerIndex to iterate
// through all the signers. dwSignerIndex == 0 selects the first signer.
//
// The pVerifyPara's VerifySignerPolicy is called to verify the signer's
// certificate.
//
// For a successfully decrypted and verified message, *ppXchgCert and
// *ppSignerCert are updated. They must be freed by calling
// CertStoreFreeCert. Otherwise, they are set to NULL.
//
// ppXchgCert and/or ppSignerCert can be NULL, indicating the
// caller isn't interested in getting the CertContext.
//
// Note: this isn't the CMSG_SIGNED_AND_ENVELOPED. Its a CMSG_SIGNED
// inside of an CMSG_ENVELOPED.
//
// The message always needs to be decrypted to allow access to the
// signed message. Therefore, if ppXchgCert != NULL, its always updated.
//--------------------------------------------------------------------------
function CryptDecryptAndVerifyMessageSignature(pDecryptPara: PCRYPT_DECRYPT_MESSAGE_PARA;
pVerifyPara: PCRYPT_VERIFY_MESSAGE_PARA; dwSignerIndex: DWORD; pbEncryptedBlob: LPBYTE;
cbEncryptedBlob: DWORD; pbDecrypted: LPBYTE; pcbDecrypted: LPDWORD;
ppXchgCert: PPCCERT_CONTEXT; ppSignerCert: PPCCERT_CONTEXT): BOOL; stdcall;
{$EXTERNALSYM CryptDecryptAndVerifyMessageSignature}
//+-------------------------------------------------------------------------
// Decodes a cryptographic message which may be one of the following types:
// CMSG_DATA
// CMSG_SIGNED
// CMSG_ENVELOPED
// CMSG_SIGNED_AND_ENVELOPED
// CMSG_HASHED
//
// dwMsgTypeFlags specifies the set of allowable messages. For example, to
// decode either SIGNED or ENVELOPED messages, set dwMsgTypeFlags to:
// CMSG_SIGNED_FLAG | CMSG_ENVELOPED_FLAG.
//
// dwProvInnerContentType is only applicable when processing nested
// crytographic messages. When processing an outer crytographic message
// it must be set to 0. When decoding a nested cryptographic message
// its the dwInnerContentType returned by a previous CryptDecodeMessage
// of the outer message. The InnerContentType can be any of the CMSG types,
// for example, CMSG_DATA, CMSG_SIGNED, ...
//
// The optional *pdwMsgType is updated with the type of message.
//
// The optional *pdwInnerContentType is updated with the type of the inner
// message. Unless there is cryptographic message nesting, CMSG_DATA
// is returned.
//
// For CMSG_DATA: returns decoded content.
// For CMSG_SIGNED: same as CryptVerifyMessageSignature.
// For CMSG_ENVELOPED: same as CryptDecryptMessage.
// For CMSG_SIGNED_AND_ENVELOPED: same as CryptDecryptMessage plus
// CryptVerifyMessageSignature.
// For CMSG_HASHED: verifies the hash and returns decoded content.
//--------------------------------------------------------------------------
function CryptDecodeMessage(dwMsgTypeFlags: DWORD; pDecryptPara: PCRYPT_DECRYPT_MESSAGE_PARA;
pVerifyPara: PCRYPT_VERIFY_MESSAGE_PARA; dwSignerIndex: DWORD; pbEncodedBlob: LPBYTE;
cbEncodedBlob: DWORD; dwPrevInnerContentType: DWORD; pdwMsgType: LPDWORD;
pdwInnerContentType: LPDWORD; pbDecoded: LPBYTE; pcbDecoded: LPDWORD;
ppXchgCert: PPCCERT_CONTEXT; ppSignerCert: PPCCERT_CONTEXT): BOOL; stdcall;
{$EXTERNALSYM CryptDecodeMessage}
//+-------------------------------------------------------------------------
// Hash the message.
//
// If fDetachedHash is TRUE, only the ComputedHash is encoded in the
// pbHashedBlob. Otherwise, both the ToBeHashed and ComputedHash
// are encoded.
//
// pcbHashedBlob or pcbComputedHash can be NULL, indicating the caller
// isn't interested in getting the output.
//--------------------------------------------------------------------------
function CryptHashMessage(pHashPara: PCRYPT_HASH_MESSAGE_PARA; fDetachedHash: BOOL;
cToBeHashed: DWORD; rgpbToBeHashed: LPBYTE; rgcbToBeHashed: LPDWORD;
pbHashedBlob: LPBYTE; pcbHashedBlob: LPDWORD; pbComputedHash: LPBYTE;
pcbComputedHash: LPDWORD): BOOL; stdcall;
{$EXTERNALSYM CryptHashMessage}
//+-------------------------------------------------------------------------
// Verify a hashed message.
//
// pcbToBeHashed or pcbComputedHash can be NULL,
// indicating the caller isn't interested in getting the output.
//--------------------------------------------------------------------------
function CryptVerifyMessageHash(pHashPara: PCRYPT_HASH_MESSAGE_PARA;
pbHashedBlob: LPBYTE; cbHashedBlob: DWORD; pbToBeHashed: LPBYTE;
pcbToBeHashed: LPDWORD; pbComputedHash: LPBYTE; pcbComputedHash: LPDWORD): BOOL; stdcall;
{$EXTERNALSYM CryptVerifyMessageHash}
//+-------------------------------------------------------------------------
// Verify a hashed message containing a detached hash.
// The "to be hashed" content is passed in separately. No
// decoded output. Otherwise, identical to CryptVerifyMessageHash.
//
// pcbComputedHash can be NULL, indicating the caller isn't interested
// in getting the output.
//--------------------------------------------------------------------------
function CryptVerifyDetachedMessageHash(pHashPara: PCRYPT_HASH_MESSAGE_PARA;
pbDetachedHashBlob: LPBYTE; cbDetachedHashBlob: DWORD; cToBeHashed: DWORD;
rgpbToBeHashed: LPBYTE; rgcbToBeHashed: LPDWORD; pbComputedHash: LPBYTE;
pcbComputedHash: LPDWORD): BOOL; stdcall;
{$EXTERNALSYM CryptVerifyDetachedMessageHash}
//+-------------------------------------------------------------------------
// Sign the message using the provider's private key specified in the
// parameters. A dummy SignerId is created and stored in the message.
//
// Normally used until a certificate has been created for the key.
//--------------------------------------------------------------------------
function CryptSignMessageWithKey(pSignPara: PCRYPT_KEY_SIGN_MESSAGE_PARA;
pbToBeSigned: LPBYTE; cbToBeSigned: DWORD; pbSignedBlob: LPBYTE;
var pcbSignedBlob: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptSignMessageWithKey}
//+-------------------------------------------------------------------------
// Verify a signed message using the specified public key info.
//
// Normally called by a CA until it has created a certificate for the
// key.
//
// pPublicKeyInfo contains the public key to use to verify the signed
// message. If NULL, the signature isn't verified (for instance, the decoded
// content may contain the PublicKeyInfo).
//
// pcbDecoded can be NULL, indicating the caller isn't interested
// in getting the decoded content.
//--------------------------------------------------------------------------
function CryptVerifyMessageSignatureWithKey(pVerifyPara: PCRYPT_KEY_VERIFY_MESSAGE_PARA;
pPublicKeyInfo: PCERT_PUBLIC_KEY_INFO; pbSignedBlob: LPBYTE; cbSignedBlob: DWORD;
pbDecoded: LPBYTE; pcbDecoded: LPDWORD): BOOL; stdcall;
{$EXTERNALSYM CryptVerifyMessageSignatureWithKey}
//+=========================================================================
// System Certificate Store Data Structures and APIs
//==========================================================================
//+-------------------------------------------------------------------------
// Get a system certificate store based on a subsystem protocol.
//
// Current examples of subsystems protocols are:
// "MY" Cert Store hold certs with associated Private Keys
// "CA" Certifying Authority certs
// "ROOT" Root Certs
// "SPC" Software publisher certs
//
//
// If hProv is NULL the default provider "1" is opened for you.
// When the store is closed the provider is release. Otherwise
// if hProv is not NULL, no provider is created or released.
//
// The returned Cert Store can be searched for an appropriate Cert
// using the Cert Store API's (see certstor.h)
//
// When done, the cert store should be closed using CertStoreClose
//--------------------------------------------------------------------------
function CertOpenSystemStoreA(hProv: HCRYPTPROV; szSubsystemProtocol: LPCSTR): HCERTSTORE; stdcall;
{$EXTERNALSYM CertOpenSystemStoreA}
function CertOpenSystemStoreW(hProv: HCRYPTPROV; szSubsystemProtocol: LPCWSTR): HCERTSTORE; stdcall;
{$EXTERNALSYM CertOpenSystemStoreW}
function CertOpenSystemStore(hProv: HCRYPTPROV; szSubsystemProtocol: LPCTSTR): HCERTSTORE; stdcall;
{$EXTERNALSYM CertOpenSystemStore}
function CertAddEncodedCertificateToSystemStoreA(szCertStoreName: LPCSTR;
pbCertEncoded: LPBYTE; cbCertEncoded: DWORD): BOOL; stdcall;
{$EXTERNALSYM CertAddEncodedCertificateToSystemStoreA}
function CertAddEncodedCertificateToSystemStoreW(szCertStoreName: LPCWSTR;
pbCertEncoded: LPBYTE; cbCertEncoded: DWORD): BOOL; stdcall;
{$EXTERNALSYM CertAddEncodedCertificateToSystemStoreW}
function CertAddEncodedCertificateToSystemStore(szCertStoreName: LPCTSTR;
pbCertEncoded: LPBYTE; cbCertEncoded: DWORD): BOOL; stdcall;
{$EXTERNALSYM CertAddEncodedCertificateToSystemStore}
//+-------------------------------------------------------------------------
// Find all certificate chains tying the given issuer name to any certificate
// that the current user has a private key for.
//
// If no certificate chain is found, FALSE is returned with LastError set
// to CRYPT_E_NOT_FOUND and the counts zeroed.
//
// IE 3.0 ASSUMPTION:
// The client certificates are in the "My" system store. The issuer
// cerificates may be in the "Root", "CA" or "My" system stores.
//--------------------------------------------------------------------------
type
PCERT_CHAIN = ^CERT_CHAIN;
{$EXTERNALSYM PCERT_CHAIN}
_CERT_CHAIN = record
cCerts: DWORD; // number of certs in chain
certs: PCERT_BLOB; // pointer to array of cert chain blobs
// representing the certs
keyLocatorInfo: CRYPT_KEY_PROV_INFO; // key locator for cert
end;
{$EXTERNALSYM _CERT_CHAIN}
CERT_CHAIN = _CERT_CHAIN;
{$EXTERNALSYM CERT_CHAIN}
TCertChain = CERT_CHAIN;
PCertChain = PCERT_CHAIN;
// WINCRYPT32API This is not exported by crypt32, it is exported by softpub
function FindCertsByIssuer(pCertChains: PCERT_CHAIN; var pcbCertChains: DWORD;
pcCertChains: LPDWORD; pbEncodedIssuerName: LPBYTE; cbEncodedIssuerName: DWORD;
pwszPurpose: LPCWSTR; dwKeySpec: DWORD): HRESULT; stdcall;
{$EXTERNALSYM FindCertsByIssuer}
//-------------------------------------------------------------------------
//
// CryptQueryObject takes a CERT_BLOB or a file name and returns the
// information about the content in the blob or in the file.
//
// Parameters:
// INPUT dwObjectType:
// Indicate the type of the object. Should be one of the
// following:
// CERT_QUERY_OBJECT_FILE
// CERT_QUERY_OBJECT_BLOB
//
// INPUT pvObject:
// If dwObjectType == CERT_QUERY_OBJECT_FILE, it is a
// LPWSTR, that is, the pointer to a wchar file name
// if dwObjectType == CERT_QUERY_OBJECT_BLOB, it is a
// PCERT_BLOB, that is, a pointer to a CERT_BLOB
//
// INPUT dwExpectedContentTypeFlags:
// Indicate the expected contenet type.
// Can be one of the following:
// CERT_QUERY_CONTENT_FLAG_ALL (the content can be any type)
// CERT_QUERY_CONTENT_FLAG_CERT
// CERT_QUERY_CONTENT_FLAG_CTL
// CERT_QUERY_CONTENT_FLAG_CRL
// CERT_QUERY_CONTENT_FLAG_SERIALIZED_STORE
// CERT_QUERY_CONTENT_FLAG_SERIALIZED_CERT
// CERT_QUERY_CONTENT_FLAG_SERIALIZED_CTL
// CERT_QUERY_CONTENT_FLAG_SERIALIZED_CRL
// CERT_QUERY_CONTENT_FLAG_PKCS7_SIGNED
// CERT_QUERY_CONTENT_FLAG_PKCS7_UNSIGNED
// CERT_QUERY_CONTENT_FLAG_PKCS7_SIGNED_EMBED
// CERT_QUERY_CONTNET_FLAG_PKCS10
// CERT_QUERY_CONTNET_FLAG_PFX
//
// INPUT dwExpectedFormatTypeFlags:
// Indicate the expected format type.
// Can be one of the following:
// CERT_QUERY_FORMAT_FLAG_ALL (the content can be any format)
// CERT_QUERY_FORMAT_FLAG_BINARY
// CERT_QUERY_FORMAT_FLAG_BASE64_ENCODED
//
//
// INPUT dwFlags
// Reserved flag. Should always set to 0
//
// OUTPUT pdwMsgAndCertEncodingType
// Optional output. If NULL != pdwMsgAndCertEncodingType,
// it contains the encoding type of the content as any
// combination of the following:
// X509_ASN_ENCODING
// PKCS_7_ASN_ENCODING
//
// OUTPUT pdwContentType
// Optional output. If NULL!=pdwContentType, it contains
// the content type as one of the the following:
// CERT_QUERY_CONTENT_CERT
// CERT_QUERY_CONTENT_CTL
// CERT_QUERY_CONTENT_CRL
// CERT_QUERY_CONTENT_SERIALIZED_STORE
// CERT_QUERY_CONTENT_SERIALIZED_CERT
// CERT_QUERY_CONTENT_SERIALIZED_CTL
// CERT_QUERY_CONTENT_SERIALIZED_CRL
// CERT_QUERY_CONTENT_PKCS7_SIGNED
// CERT_QUERY_CONTENT_PKCS7_UNSIGNED
// CERT_QUERY_CONTENT_PKCS7_SIGNED_EMBED
// CERT_QUERY_CONTENT_PKCS10
// CERT_QUERY_CONTENT_PFX
//
// OUTPUT pdwFormatType
// Optional output. If NULL !=pdwFormatType, it
// contains the format type of the content as one of the
// following:
// CERT_QUERY_FORMAT_BINARY
// CERT_QUERY_FORMAT_BASE64_ENCODED
//
//
// OUTPUT phCertStore
// Optional output. If NULL !=phStore,
// it contains a cert store that includes all of certificates,
// CRL, and CTL in the object if the object content type is
// one of the following:
// CERT_QUERY_CONTENT_CERT
// CERT_QUERY_CONTENT_CTL
// CERT_QUERY_CONTENT_CRL
// CERT_QUERY_CONTENT_SERIALIZED_STORE
// CERT_QUERY_CONTENT_SERIALIZED_CERT
// CERT_QUERY_CONTENT_SERIALIZED_CTL
// CERT_QUERY_CONTENT_SERIALIZED_CRL
// CERT_QUERY_CONTENT_PKCS7_SIGNED
// CERT_QUERY_CONTENT_PKCS7_SIGNED_EMBED
//
// Caller should free *phCertStore via CertCloseStore.
//
//
// OUTPUT phMsg Optional output. If NULL != phMsg,
// it contains a handle to a opened message if
// the content type is one of the following:
// CERT_QUERY_CONTENT_PKCS7_SIGNED
// CERT_QUERY_CONTENT_PKCS7_UNSIGNED
// CERT_QUERY_CONTENT_PKCS7_SIGNED_EMBED
//
// Caller should free *phMsg via CryptMsgClose.
//
// OUTPUT pContext Optional output. If NULL != pContext,
// it contains either a PCCERT_CONTEXT or PCCRL_CONTEXT,
// or PCCTL_CONTEXT based on the content type.
//
// If the content type is CERT_QUERY_CONTENT_CERT or
// CERT_QUERY_CONTENT_SERIALIZED_CERT, it is a PCCERT_CONTEXT;
// Caller should free the pContext via CertFreeCertificateContext.
//
// If the content type is CERT_QUERY_CONTENT_CRL or
// CERT_QUERY_CONTENT_SERIALIZED_CRL, it is a PCCRL_CONTEXT;
// Caller should free the pContext via CertFreeCRLContext.
//
// If the content type is CERT_QUERY_CONTENT_CTL or
// CERT_QUERY_CONTENT_SERIALIZED_CTL, it is a PCCTL_CONTEXT;
// Caller should free the pContext via CertFreeCTLContext.
//
// If the *pbObject is of type CERT_QUERY_CONTENT_PKCS10 or CERT_QUERY_CONTENT_PFX, CryptQueryObject
// will not return anything in *phCertstore, *phMsg, or *ppvContext.
//--------------------------------------------------------------------------
function CryptQueryObject(dwObjectType: DWORD; pvObject: Pointer;
dwExpectedContentTypeFlags, dwExpectedFormatTypeFlags, dwFlags: DWORD;
pdwMsgAndCertEncodingType, pdwContentType, pdwFormatType: LPDWORD;
phCertStore: PHCERTSTORE; phMsg: PHCRYPTMSG; ppvContext: PPointer): BOOL; stdcall;
{$EXTERNALSYM CryptQueryObject}
//-------------------------------------------------------------------------
//dwObjectType for CryptQueryObject
//-------------------------------------------------------------------------
const
CERT_QUERY_OBJECT_FILE = $00000001;
{$EXTERNALSYM CERT_QUERY_OBJECT_FILE}
CERT_QUERY_OBJECT_BLOB = $00000002;
{$EXTERNALSYM CERT_QUERY_OBJECT_BLOB}
//-------------------------------------------------------------------------
//dwConentType for CryptQueryObject
//-------------------------------------------------------------------------
//encoded single certificate
CERT_QUERY_CONTENT_CERT = 1;
{$EXTERNALSYM CERT_QUERY_CONTENT_CERT}
//encoded single CTL
CERT_QUERY_CONTENT_CTL = 2;
{$EXTERNALSYM CERT_QUERY_CONTENT_CTL}
//encoded single CRL
CERT_QUERY_CONTENT_CRL = 3;
{$EXTERNALSYM CERT_QUERY_CONTENT_CRL}
//serialized store
CERT_QUERY_CONTENT_SERIALIZED_STORE = 4;
{$EXTERNALSYM CERT_QUERY_CONTENT_SERIALIZED_STORE}
//serialized single certificate
CERT_QUERY_CONTENT_SERIALIZED_CERT = 5;
{$EXTERNALSYM CERT_QUERY_CONTENT_SERIALIZED_CERT}
//serialized single CTL
CERT_QUERY_CONTENT_SERIALIZED_CTL = 6;
{$EXTERNALSYM CERT_QUERY_CONTENT_SERIALIZED_CTL}
//serialized single CRL
CERT_QUERY_CONTENT_SERIALIZED_CRL = 7;
{$EXTERNALSYM CERT_QUERY_CONTENT_SERIALIZED_CRL}
//a PKCS#7 signed message
CERT_QUERY_CONTENT_PKCS7_SIGNED = 8;
{$EXTERNALSYM CERT_QUERY_CONTENT_PKCS7_SIGNED}
//a PKCS#7 message, such as enveloped message. But it is not a signed message,
CERT_QUERY_CONTENT_PKCS7_UNSIGNED = 9;
{$EXTERNALSYM CERT_QUERY_CONTENT_PKCS7_UNSIGNED}
//a PKCS7 signed message embedded in a file
CERT_QUERY_CONTENT_PKCS7_SIGNED_EMBED = 10;
{$EXTERNALSYM CERT_QUERY_CONTENT_PKCS7_SIGNED_EMBED}
//an encoded PKCS#10
CERT_QUERY_CONTENT_PKCS10 = 11;
{$EXTERNALSYM CERT_QUERY_CONTENT_PKCS10}
//an encoded PKX BLOB
CERT_QUERY_CONTENT_PFX = 12;
{$EXTERNALSYM CERT_QUERY_CONTENT_PFX}
//-------------------------------------------------------------------------
//dwExpectedConentTypeFlags for CryptQueryObject
//-------------------------------------------------------------------------
//encoded single certificate
CERT_QUERY_CONTENT_FLAG_CERT = 1 shl CERT_QUERY_CONTENT_CERT;
{$EXTERNALSYM CERT_QUERY_CONTENT_FLAG_CERT}
//encoded single CTL
CERT_QUERY_CONTENT_FLAG_CTL = 1 shl CERT_QUERY_CONTENT_CTL;
{$EXTERNALSYM CERT_QUERY_CONTENT_FLAG_CTL}
//encoded single CRL
CERT_QUERY_CONTENT_FLAG_CRL = 1 shl CERT_QUERY_CONTENT_CRL;
{$EXTERNALSYM CERT_QUERY_CONTENT_FLAG_CRL}
//serialized store
CERT_QUERY_CONTENT_FLAG_SERIALIZED_STORE = 1 shl CERT_QUERY_CONTENT_SERIALIZED_STORE;
{$EXTERNALSYM CERT_QUERY_CONTENT_FLAG_SERIALIZED_STORE}
//serialized single certificate
CERT_QUERY_CONTENT_FLAG_SERIALIZED_CERT = 1 shl CERT_QUERY_CONTENT_SERIALIZED_CERT;
{$EXTERNALSYM CERT_QUERY_CONTENT_FLAG_SERIALIZED_CERT}
//serialized single CTL
CERT_QUERY_CONTENT_FLAG_SERIALIZED_CTL = 1 shl CERT_QUERY_CONTENT_SERIALIZED_CTL;
{$EXTERNALSYM CERT_QUERY_CONTENT_FLAG_SERIALIZED_CTL}
//serialized single CRL
CERT_QUERY_CONTENT_FLAG_SERIALIZED_CRL = 1 shl CERT_QUERY_CONTENT_SERIALIZED_CRL;
{$EXTERNALSYM CERT_QUERY_CONTENT_FLAG_SERIALIZED_CRL}
//an encoded PKCS#7 signed message
CERT_QUERY_CONTENT_FLAG_PKCS7_SIGNED = 1 shl CERT_QUERY_CONTENT_PKCS7_SIGNED;
{$EXTERNALSYM CERT_QUERY_CONTENT_FLAG_PKCS7_SIGNED}
//an encoded PKCS#7 message. But it is not a signed message
CERT_QUERY_CONTENT_FLAG_PKCS7_UNSIGNED = 1 shl CERT_QUERY_CONTENT_PKCS7_UNSIGNED;
{$EXTERNALSYM CERT_QUERY_CONTENT_FLAG_PKCS7_UNSIGNED}
//the content includes an embedded PKCS7 signed message
CERT_QUERY_CONTENT_FLAG_PKCS7_SIGNED_EMBED = 1 shl CERT_QUERY_CONTENT_PKCS7_SIGNED_EMBED;
{$EXTERNALSYM CERT_QUERY_CONTENT_FLAG_PKCS7_SIGNED_EMBED}
//an encoded PKCS#10
CERT_QUERY_CONTENT_FLAG_PKCS10 = 1 shl CERT_QUERY_CONTENT_PKCS10;
{$EXTERNALSYM CERT_QUERY_CONTENT_FLAG_PKCS10}
//an encoded PFX BLOB
CERT_QUERY_CONTENT_FLAG_PFX = 1 shl CERT_QUERY_CONTENT_PFX;
{$EXTERNALSYM CERT_QUERY_CONTENT_FLAG_PFX}
//content can be any type
CERT_QUERY_CONTENT_FLAG_ALL = CERT_QUERY_CONTENT_FLAG_CERT or
CERT_QUERY_CONTENT_FLAG_CTL or
CERT_QUERY_CONTENT_FLAG_CRL or
CERT_QUERY_CONTENT_FLAG_SERIALIZED_STORE or
CERT_QUERY_CONTENT_FLAG_SERIALIZED_CERT or
CERT_QUERY_CONTENT_FLAG_SERIALIZED_CTL or
CERT_QUERY_CONTENT_FLAG_SERIALIZED_CRL or
CERT_QUERY_CONTENT_FLAG_PKCS7_SIGNED or
CERT_QUERY_CONTENT_FLAG_PKCS7_UNSIGNED or
CERT_QUERY_CONTENT_FLAG_PKCS7_SIGNED_EMBED or
CERT_QUERY_CONTENT_FLAG_PKCS10 or
CERT_QUERY_CONTENT_FLAG_PFX;
{$EXTERNALSYM CERT_QUERY_CONTENT_FLAG_ALL}
//-------------------------------------------------------------------------
//dwFormatType for CryptQueryObject
//-------------------------------------------------------------------------
//the content is in binary format
CERT_QUERY_FORMAT_BINARY = 1;
{$EXTERNALSYM CERT_QUERY_FORMAT_BINARY}
//the content is base64 encoded
CERT_QUERY_FORMAT_BASE64_ENCODED = 2;
{$EXTERNALSYM CERT_QUERY_FORMAT_BASE64_ENCODED}
//-------------------------------------------------------------------------
//dwExpectedFormatTypeFlags for CryptQueryObject
//-------------------------------------------------------------------------
//the content is in binary format
CERT_QUERY_FORMAT_FLAG_BINARY = 1 shl CERT_QUERY_FORMAT_BINARY;
{$EXTERNALSYM CERT_QUERY_FORMAT_FLAG_BINARY}
//the content is base64 encoded
CERT_QUERY_FORMAT_FLAG_BASE64_ENCODED = 1 shl CERT_QUERY_FORMAT_BASE64_ENCODED;
{$EXTERNALSYM CERT_QUERY_FORMAT_FLAG_BASE64_ENCODED}
//the content can be of any format
CERT_QUERY_FORMAT_FLAG_ALL = CERT_QUERY_FORMAT_FLAG_BINARY or CERT_QUERY_FORMAT_FLAG_BASE64_ENCODED;
{$EXTERNALSYM CERT_QUERY_FORMAT_FLAG_ALL}
//
// Crypt32 Memory Management Routines. All Crypt32 API which return allocated
// buffers will do so via CryptMemAlloc, CryptMemRealloc. Clients can free
// those buffers using CryptMemFree. Also included is CryptMemSize
//
function CryptMemAlloc(cbSize: ULONG): LPVOID; stdcall;
{$EXTERNALSYM CryptMemAlloc}
function CryptMemRealloc(pv: LPVOID; cbSize: ULONG): LPVOID; stdcall;
{$EXTERNALSYM CryptMemRealloc}
procedure CryptMemFree(pv: LPVOID); stdcall;
{$EXTERNALSYM CryptMemFree}
//
// Crypt32 Asynchronous Parameter Management Routines. All Crypt32 API which
// expose asynchronous mode operation use a Crypt32 Async Handle to pass
// around information about the operation e.g. callback routines. The
// following API are used for manipulation of the async handle
//
type
HCRYPTASYNC = HANDLE;
{$EXTERNALSYM HCRYPTASYNC}
PHCRYPTASYNC = ^HCRYPTASYNC;
{$EXTERNALSYM PHCRYPTASYNC}
PFN_CRYPT_ASYNC_PARAM_FREE_FUNC = procedure(pszParamOid: LPSTR; pvParam: LPVOID); stdcall;
{$EXTERNALSYM PFN_CRYPT_ASYNC_PARAM_FREE_FUNC}
PFnCryptAsyncParamFreeFunc = PFN_CRYPT_ASYNC_PARAM_FREE_FUNC;
function CryptCreateAsyncHandle(dwFlags: DWORD; phAsync: PHCRYPTASYNC): BOOL; stdcall;
{$EXTERNALSYM CryptCreateAsyncHandle}
function CryptSetAsyncParam(hAsync: HCRYPTASYNC; pszParamOid: LPSTR;
pvParam: LPVOID; pfnFree: PFN_CRYPT_ASYNC_PARAM_FREE_FUNC): BOOL; stdcall;
{$EXTERNALSYM CryptSetAsyncParam}
function CryptGetAsyncParam(hAsync: HCRYPTASYNC; pszParamOid: LPSTR;
var ppvParam: LPVOID; var ppfnFree: PFN_CRYPT_ASYNC_PARAM_FREE_FUNC): BOOL; stdcall;
{$EXTERNALSYM CryptGetAsyncParam}
function CryptCloseAsyncHandle(hAsync: HCRYPTASYNC): BOOL; stdcall;
{$EXTERNALSYM CryptCloseAsyncHandle}
//
// Crypt32 Remote Object Retrieval Routines. This API allows retrieval of
// remote PKI objects where the location is given by an URL. The remote
// object retrieval manager exposes two provider models. One is the "Scheme
// Provider" model which allows for installable protocol providers as defined
// by the URL scheme e.g. ldap, http, ftp. The scheme provider entry point is
// the same as the CryptRetrieveObjectByUrl however the *ppvObject returned
// is ALWAYS a counted array of encoded bits (one per object retrieved). The
// second provider model is the "Context Provider" model which allows for
// installable creators of CAPI2 context handles (objects) based on the
// retrieved encoded bits. These are dispatched based on the object OID given
// in the call to CryptRetrieveObjectByUrl.
//
type
PCRYPT_BLOB_ARRAY = ^CRYPT_BLOB_ARRAY;
{$EXTERNALSYM PCRYPT_BLOB_ARRAY}
_CRYPT_BLOB_ARRAY = record
cBlob: DWORD;
rgBlob: PCRYPT_DATA_BLOB;
end;
{$EXTERNALSYM _CRYPT_BLOB_ARRAY}
CRYPT_BLOB_ARRAY = _CRYPT_BLOB_ARRAY;
{$EXTERNALSYM CRYPT_BLOB_ARRAY}
TCryptBlobArray = CRYPT_BLOB_ARRAY;
PCryptBlobArray = PCRYPT_BLOB_ARRAY;
PCRYPT_CREDENTIALS = ^CRYPT_CREDENTIALS;
{$EXTERNALSYM PCRYPT_CREDENTIALS}
_CRYPT_CREDENTIALS = record
cbSize: DWORD;
pszCredentialsOid: LPCSTR;
pvCredentials: LPVOID;
end;
{$EXTERNALSYM _CRYPT_CREDENTIALS}
CRYPT_CREDENTIALS = _CRYPT_CREDENTIALS;
{$EXTERNALSYM CRYPT_CREDENTIALS}
TCryptCredentials = CRYPT_CREDENTIALS;
PCryptCredentials = PCRYPT_CREDENTIALS;
const
CREDENTIAL_OID_PASSWORD_CREDENTIALS_A = LPCSTR(1);
{$EXTERNALSYM CREDENTIAL_OID_PASSWORD_CREDENTIALS_A}
CREDENTIAL_OID_PASSWORD_CREDENTIALS_W = LPCSTR(2);
{$EXTERNALSYM CREDENTIAL_OID_PASSWORD_CREDENTIALS_W}
{$IFDEF UNICODE}
CREDENTIAL_OID_PASSWORD_CREDENTIALS = CREDENTIAL_OID_PASSWORD_CREDENTIALS_W;
{$EXTERNALSYM CREDENTIAL_OID_PASSWORD_CREDENTIALS}
{$ELSE}
CREDENTIAL_OID_PASSWORD_CREDENTIALS = CREDENTIAL_OID_PASSWORD_CREDENTIALS_A;
{$EXTERNALSYM CREDENTIAL_OID_PASSWORD_CREDENTIALS}
{$ENDIF UNICODE}
type
PCRYPT_PASSWORD_CREDENTIALSA = ^CRYPT_PASSWORD_CREDENTIALSA;
{$EXTERNALSYM PCRYPT_PASSWORD_CREDENTIALSA}
_CRYPT_PASSWORD_CREDENTIALSA = record
cbSize: DWORD;
pszUsername: LPSTR;
pszPassword: LPSTR;
end;
{$EXTERNALSYM _CRYPT_PASSWORD_CREDENTIALSA}
CRYPT_PASSWORD_CREDENTIALSA = _CRYPT_PASSWORD_CREDENTIALSA;
{$EXTERNALSYM CRYPT_PASSWORD_CREDENTIALSA}
TCryptPasswordCredentialsA = CRYPT_PASSWORD_CREDENTIALSA;
PCryptPasswordCredentialsA = PCRYPT_PASSWORD_CREDENTIALSA;
PCRYPT_PASSWORD_CREDENTIALSW = ^CRYPT_PASSWORD_CREDENTIALSW;
{$EXTERNALSYM PCRYPT_PASSWORD_CREDENTIALSW}
_CRYPT_PASSWORD_CREDENTIALSW = record
cbSize: DWORD;
pszUsername: LPWSTR;
pszPassword: LPWSTR;
end;
{$EXTERNALSYM _CRYPT_PASSWORD_CREDENTIALSW}
CRYPT_PASSWORD_CREDENTIALSW = _CRYPT_PASSWORD_CREDENTIALSW;
{$EXTERNALSYM CRYPT_PASSWORD_CREDENTIALSW}
TCryptPasswordCredentialsW = CRYPT_PASSWORD_CREDENTIALSW;
PCryptPasswordCredentialsW = PCRYPT_PASSWORD_CREDENTIALSW;
{$IFDEF UNICODE}
CRYPT_PASSWORD_CREDENTIALS = CRYPT_PASSWORD_CREDENTIALSW;
{$EXTERNALSYM CRYPT_PASSWORD_CREDENTIALS}
PCRYPT_PASSWORD_CREDENTIALS = PCRYPT_PASSWORD_CREDENTIALSW;
{$EXTERNALSYM PCRYPT_PASSWORD_CREDENTIALS}
TCryptPasswordCredentials = TCryptPasswordCredentialsW;
PCryptPasswordCredentials = PCryptPasswordCredentialsW;
{$ELSE}
CRYPT_PASSWORD_CREDENTIALS = CRYPT_PASSWORD_CREDENTIALSA;
{$EXTERNALSYM CRYPT_PASSWORD_CREDENTIALS}
PCRYPT_PASSWORD_CREDENTIALS = PCRYPT_PASSWORD_CREDENTIALSA;
{$EXTERNALSYM PCRYPT_PASSWORD_CREDENTIALS}
TCryptPasswordCredentials = TCryptPasswordCredentialsA;
PCryptPasswordCredentials = PCryptPasswordCredentialsA;
{$ENDIF UNICODE}
//
// Scheme Provider Signatures
//
const
SCHEME_OID_RETRIEVE_ENCODED_OBJECT_FUNC = 'SchemeDllRetrieveEncodedObject';
{$EXTERNALSYM SCHEME_OID_RETRIEVE_ENCODED_OBJECT_FUNC}
type
PFN_FREE_ENCODED_OBJECT_FUNC = procedure(pszObjectOid: LPCSTR;
pObject: PCRYPT_BLOB_ARRAY; pvFreeContext: LPVOID); stdcall;
{$EXTERNALSYM PFN_FREE_ENCODED_OBJECT_FUNC}
PFnFreeEncodedObjectFunc = PFN_FREE_ENCODED_OBJECT_FUNC;
//
// SchemeDllRetrieveEncodedObject has the following signature:
//
// BOOL WINAPI SchemeDllRetrieveEncodedObject (
// IN LPCSTR pszUrl,
// IN LPCSTR pszObjectOid,
// IN DWORD dwRetrievalFlags,
// IN DWORD dwTimeout,
// OUT PCRYPT_BLOB_ARRAY pObject,
// OUT PFN_FREE_ENCODED_OBJECT_FUNC* ppfnFreeObject,
// OUT LPVOID* ppvFreeContext,
// IN HCRYPTASYNC hAsyncRetrieve,
// IN PCRYPT_CREDENTIALS pCredentials,
// IN LPVOID pvReserved
// )
//
//
// Context Provider Signatures
//
const
CONTEXT_OID_CREATE_OBJECT_CONTEXT_FUNC = 'ContextDllCreateObjectContext';
{$EXTERNALSYM CONTEXT_OID_CREATE_OBJECT_CONTEXT_FUNC}
CONTEXT_OID_CERTIFICATE = LPCSTR(1);
{$EXTERNALSYM CONTEXT_OID_CERTIFICATE}
CONTEXT_OID_CRL = LPCSTR(2);
{$EXTERNALSYM CONTEXT_OID_CRL}
CONTEXT_OID_CTL = LPCSTR(3);
{$EXTERNALSYM CONTEXT_OID_CTL}
CONTEXT_OID_PKCS7 = LPCSTR(4);
{$EXTERNALSYM CONTEXT_OID_PKCS7}
CONTEXT_OID_CAPI2_ANY = LPCSTR(5);
{$EXTERNALSYM CONTEXT_OID_CAPI2_ANY}
//
// ContextDllCreateObjectContext has the following signature:
//
// BOOL WINAPI ContextDllCreateObjectContext (
// IN LPCSTR pszObjectOid,
// IN DWORD dwRetrievalFlags,
// IN PCRYPT_BLOB_ARRAY pObject,
// OUT LPVOID* ppvContext
// )
//
//
// Remote Object Retrieval API
//
//
// Retrieval flags
//
CRYPT_RETRIEVE_MULTIPLE_OBJECTS = $00000001;
{$EXTERNALSYM CRYPT_RETRIEVE_MULTIPLE_OBJECTS}
CRYPT_CACHE_ONLY_RETRIEVAL = $00000002;
{$EXTERNALSYM CRYPT_CACHE_ONLY_RETRIEVAL}
CRYPT_WIRE_ONLY_RETRIEVAL = $00000004;
{$EXTERNALSYM CRYPT_WIRE_ONLY_RETRIEVAL}
CRYPT_DONT_CACHE_RESULT = $00000008;
{$EXTERNALSYM CRYPT_DONT_CACHE_RESULT}
CRYPT_ASYNC_RETRIEVAL = $00000010;
{$EXTERNALSYM CRYPT_ASYNC_RETRIEVAL}
//
// Data verification retrieval flags
//
// CRYPT_VERIFY_CONTEXT_SIGNATURE is used to get signature verification
// on the context created. In this case pszObjectOid must be non-NULL and
// pvVerify points to the signer certificate context
//
// CRYPT_VERIFY_DATA_HASH is used to get verification of the blob data
// retrieved by the protocol. The pvVerify points to an URL_DATA_HASH
// structure (TBD)
//
CRYPT_VERIFY_CONTEXT_SIGNATURE = $00000020;
{$EXTERNALSYM CRYPT_VERIFY_CONTEXT_SIGNATURE}
CRYPT_VERIFY_DATA_HASH = $00000040;
{$EXTERNALSYM CRYPT_VERIFY_DATA_HASH}
//
// Time Valid Object flags
//
CRYPT_KEEP_TIME_VALID = $00000080;
{$EXTERNALSYM CRYPT_KEEP_TIME_VALID}
CRYPT_DONT_VERIFY_SIGNATURE = $00000100;
{$EXTERNALSYM CRYPT_DONT_VERIFY_SIGNATURE}
CRYPT_DONT_CHECK_TIME_VALIDITY = $00000200;
{$EXTERNALSYM CRYPT_DONT_CHECK_TIME_VALIDITY}
function CryptRetrieveObjectByUrlA(pszUrl: LPCSTR; pszObjectOid: LPCSTR;
dwRetrievalFlags: DWORD; dwTimeout: DWORD; var ppvObject: LPVOID;
hAsyncRetrieve: HCRYPTASYNC; pCredentials: PCRYPT_CREDENTIALS;
pvVerify: LPVOID; pvReserved: LPVOID): BOOL; stdcall;
{$EXTERNALSYM CryptRetrieveObjectByUrlA}
function CryptRetrieveObjectByUrlW(pszUrl: LPCWSTR; pszObjectOid: LPCSTR;
dwRetrievalFlags: DWORD; dwTimeout: DWORD; var ppvObject: LPVOID;
hAsyncRetrieve: HCRYPTASYNC; pCredentials: PCRYPT_CREDENTIALS;
pvVerify: LPVOID; pvReserved: LPVOID): BOOL; stdcall;
{$EXTERNALSYM CryptRetrieveObjectByUrlW}
function CryptRetrieveObjectByUrl(pszUrl: LPCTSTR; pszObjectOid: LPCSTR;
dwRetrievalFlags: DWORD; dwTimeout: DWORD; var ppvObject: LPVOID;
hAsyncRetrieve: HCRYPTASYNC; pCredentials: PCRYPT_CREDENTIALS;
pvVerify: LPVOID; pvReserved: LPVOID): BOOL; stdcall;
{$EXTERNALSYM CryptRetrieveObjectByUrl}
//
// Call back function to cancel object retrieval
//
// The function can be installed on a per thread basis.
// If CryptInstallCancelRetrieval is called for multiple times, only the most recent
// installation will be kept.
//
// This is only effective for http, https, gopher, and ftp protocol.
// It is ignored by the rest of the protocols.
type
PFN_CRYPT_CANCEL_RETRIEVAL = function(dwFlags: DWORD; pvArg: Pointer): BOOL; stdcall;
{$EXTERNALSYM PFN_CRYPT_CANCEL_RETRIEVAL}
PFnCryptCancelRetrieval = PFN_CRYPT_CANCEL_RETRIEVAL;
//
// PFN_CRYPT_CANCEL_RETRIEVAL
//
// This function should return FALSE when the object retrieval should be continued
// and return TRUE when the object retrieval should be cancelled.
//
function CryptInstallCancelRetrieval(pfnCancel: PFN_CRYPT_CANCEL_RETRIEVAL;
pvArg: Pointer; dwFlags: DWORD; pvReserved: Pointer): BOOL; stdcall;
{$EXTERNALSYM CryptInstallCancelRetrieval}
function CryptUninstallCancelRetrieval(dwFlags: DWORD; pvReserved: Pointer): BOOL; stdcall;
{$EXTERNALSYM CryptUninstallCancelRetrieval}
function CryptCancelAsyncRetrieval(hAsyncRetrieval: HCRYPTASYNC): BOOL; stdcall;
{$EXTERNALSYM CryptCancelAsyncRetrieval}
//
// Remote Object Async Retrieval parameters
//
//
// A client that wants to be notified of asynchronous object retrieval
// completion sets this parameter on the async handle
//
const
CRYPT_PARAM_ASYNC_RETRIEVAL_COMPLETION = LPCSTR(1);
{$EXTERNALSYM CRYPT_PARAM_ASYNC_RETRIEVAL_COMPLETION}
type
PFN_CRYPT_ASYNC_RETRIEVAL_COMPLETION_FUNC = procedure(pvCompletion: LPVOID;
dwCompletionCode: DWORD; pszUrl: LPCSTR; pszObjectOid: LPSTR; pvObject: LPVOID); stdcall;
{$EXTERNALSYM PFN_CRYPT_ASYNC_RETRIEVAL_COMPLETION_FUNC}
PFnCryptASynchRetrievalCompletionFunc = PFN_CRYPT_ASYNC_RETRIEVAL_COMPLETION_FUNC;
PCRYPT_ASYNC_RETRIEVAL_COMPLETION = ^CRYPT_ASYNC_RETRIEVAL_COMPLETION;
{$EXTERNALSYM PCRYPT_ASYNC_RETRIEVAL_COMPLETION}
_CRYPT_ASYNC_RETRIEVAL_COMPLETION = record
pfnCompletion: PFN_CRYPT_ASYNC_RETRIEVAL_COMPLETION_FUNC;
pvCompletion: LPVOID;
end;
{$EXTERNALSYM _CRYPT_ASYNC_RETRIEVAL_COMPLETION}
CRYPT_ASYNC_RETRIEVAL_COMPLETION = _CRYPT_ASYNC_RETRIEVAL_COMPLETION;
{$EXTERNALSYM CRYPT_ASYNC_RETRIEVAL_COMPLETION}
TCryptAsyncRetrievalCompletion = CRYPT_ASYNC_RETRIEVAL_COMPLETION;
PCryptAsyncRetrievalCompletion = PCRYPT_ASYNC_RETRIEVAL_COMPLETION;
//
// This function is set on the async handle by a scheme provider that
// supports asynchronous retrieval
//
const
CRYPT_PARAM_CANCEL_ASYNC_RETRIEVAL = LPCSTR(2);
{$EXTERNALSYM CRYPT_PARAM_CANCEL_ASYNC_RETRIEVAL}
type
PFN_CANCEL_ASYNC_RETRIEVAL_FUNC = function(hAsyncRetrieve: HCRYPTASYNC): BOOL; stdcall;
{$EXTERNALSYM PFN_CANCEL_ASYNC_RETRIEVAL_FUNC}
PFnCancelASynchRetrievalFunc = PFN_CANCEL_ASYNC_RETRIEVAL_FUNC;
//
// Get the locator for a CAPI object
//
const
CRYPT_GET_URL_FROM_PROPERTY = $00000001;
{$EXTERNALSYM CRYPT_GET_URL_FROM_PROPERTY}
CRYPT_GET_URL_FROM_EXTENSION = $00000002;
{$EXTERNALSYM CRYPT_GET_URL_FROM_EXTENSION}
CRYPT_GET_URL_FROM_UNAUTH_ATTRIBUTE = $00000004;
{$EXTERNALSYM CRYPT_GET_URL_FROM_UNAUTH_ATTRIBUTE}
CRYPT_GET_URL_FROM_AUTH_ATTRIBUTE = $00000008;
{$EXTERNALSYM CRYPT_GET_URL_FROM_AUTH_ATTRIBUTE}
type
PCRYPT_URL_ARRAY = ^CRYPT_URL_ARRAY;
{$EXTERNALSYM PCRYPT_URL_ARRAY}
_CRYPT_URL_ARRAY = record
cUrl: DWORD;
rgwszUrl: LPWSTR;
end;
{$EXTERNALSYM _CRYPT_URL_ARRAY}
CRYPT_URL_ARRAY = _CRYPT_URL_ARRAY;
{$EXTERNALSYM CRYPT_URL_ARRAY}
TCryptUrlArray = CRYPT_URL_ARRAY;
PCryptUrlArray = PCRYPT_URL_ARRAY;
PCRYPT_URL_INFO = ^CRYPT_URL_INFO;
{$EXTERNALSYM PCRYPT_URL_INFO}
_CRYPT_URL_INFO = record
cbSize: DWORD;
end;
{$EXTERNALSYM _CRYPT_URL_INFO}
CRYPT_URL_INFO = _CRYPT_URL_INFO;
{$EXTERNALSYM CRYPT_URL_INFO}
TCryptUrlInfo = CRYPT_URL_INFO;
PCryptUrlInfo = PCRYPT_URL_INFO;
function CryptGetObjectUrl(pszUrlOid: LPCSTR; pvPara: LPVOID; dwFlags: DWORD;
pUrlArray: PCRYPT_URL_ARRAY; var pcbUrlArray: DWORD; pUrlInfo: PCRYPT_URL_INFO;
pcbUrlInfo: LPDWORD; pvReserved: LPVOID): BOOL; stdcall;
{$EXTERNALSYM CryptGetObjectUrl}
const
URL_OID_GET_OBJECT_URL_FUNC = 'UrlDllGetObjectUrl';
{$EXTERNALSYM URL_OID_GET_OBJECT_URL_FUNC}
//
// UrlDllGetObjectUrl has the same signature as CryptGetObjectUrl
//
//
// URL_OID_CERTIFICATE_ISSUER
//
// pvPara == PCCERT_CONTEXT, certificate whose issuer's URL is being requested
//
// This will be retrieved from the authority info access extension or property
// on the certificate
//
// URL_OID_CERTIFICATE_CRL_DIST_POINT
//
// pvPara == PCCERT_CONTEXT, certificate whose CRL distribution point is being
// requested
//
// This will be retrieved from the CRL distribution point extension or property
// on the certificate
//
// URL_OID_CTL_ISSUER
//
// pvPara == PCCTL_CONTEXT, Signer Index, CTL whose issuer's URL (identified
// by the signer index) is being requested
//
// This will be retrieved from an authority info access attribute method encoded
// in each signer info in the PKCS7 (CTL)
//
// URL_OID_CTL_NEXT_UPDATE
//
// pvPara == PCCTL_CONTEXT, Signer Index, CTL whose next update URL is being
// requested and an optional signer index in case we need to check signer
// info attributes
//
// This will be retrieved from an authority info access CTL extension, property,
// or signer info attribute method
//
// URL_OID_CRL_ISSUER
//
// pvPara == PCCRL_CONTEXT, CRL whose issuer's URL is being requested
//
// This will be retrieved from a property on the CRL which has been inherited
// from the subject cert (either from the subject cert issuer or the subject
// cert distribution point extension). It will be encoded as an authority
// info access extension method.
//
const
URL_OID_CERTIFICATE_ISSUER = LPCSTR(1);
{$EXTERNALSYM URL_OID_CERTIFICATE_ISSUER}
URL_OID_CERTIFICATE_CRL_DIST_POINT = LPCSTR(2);
{$EXTERNALSYM URL_OID_CERTIFICATE_CRL_DIST_POINT}
URL_OID_CTL_ISSUER = LPCSTR(3);
{$EXTERNALSYM URL_OID_CTL_ISSUER}
URL_OID_CTL_NEXT_UPDATE = LPCSTR(4);
{$EXTERNALSYM URL_OID_CTL_NEXT_UPDATE}
URL_OID_CRL_ISSUER = LPCSTR(5);
{$EXTERNALSYM URL_OID_CRL_ISSUER}
//
// Get a time valid CAPI2 object
//
function CryptGetTimeValidObject(pszTimeValidOid: LPCSTR; pvPara: LPVOID;
pIssuer: PCCERT_CONTEXT; pftValidFor: LPFILETIME; dwFlags, dwTimeout: DWORD;
ppvObject: LPLPVOID; pCredentials: PCRYPT_CREDENTIALS; pvReserved: LPVOID): BOOL; stdcall;
{$EXTERNALSYM CryptGetTimeValidObject}
const
TIME_VALID_OID_GET_OBJECT_FUNC = 'TimeValidDllGetObject';
{$EXTERNALSYM TIME_VALID_OID_GET_OBJECT_FUNC}
//
// TimeValidDllGetObject has the same signature as CryptGetTimeValidObject
//
//
// TIME_VALID_OID_GET_CTL
//
// pvPara == PCCTL_CONTEXT, the current CTL
//
// TIME_VALID_OID_GET_CRL
//
// pvPara == PCCRL_CONTEXT, the current CRL
//
// TIME_VALID_OID_GET_CRL_FROM_CERT
//
// pvPara == PCCERT_CONTEXT, the subject cert
//
TIME_VALID_OID_GET_CTL = LPCSTR(1);
{$EXTERNALSYM TIME_VALID_OID_GET_CTL}
TIME_VALID_OID_GET_CRL = LPCSTR(2);
{$EXTERNALSYM TIME_VALID_OID_GET_CRL}
TIME_VALID_OID_GET_CRL_FROM_CERT = LPCSTR(3);
{$EXTERNALSYM TIME_VALID_OID_GET_CRL_FROM_CERT}
function CryptFlushTimeValidObject(pszFlushTimeValidOid: LPCSTR; pvPara: LPVOID;
pIssuer: PCCERT_CONTEXT; dwFlags: DWORD; pvReserved: LPVOID): BOOL; stdcall;
{$EXTERNALSYM CryptFlushTimeValidObject}
const
TIME_VALID_OID_FLUSH_OBJECT_FUNC = 'TimeValidDllFlushObject';
{$EXTERNALSYM TIME_VALID_OID_FLUSH_OBJECT_FUNC}
//
// TimeValidDllFlushObject has the same signature as CryptFlushTimeValidObject
//
//
// TIME_VALID_OID_FLUSH_CTL
//
// pvPara == PCCTL_CONTEXT, the CTL to flush
//
// TIME_VALID_OID_FLUSH_CRL
//
// pvPara == PCCRL_CONTEXT, the CRL to flush
//
// TIME_VALID_OID_FLUSH_CRL_FROM_CERT
//
TIME_VALID_OID_FLUSH_CTL = LPCSTR(1);
{$EXTERNALSYM TIME_VALID_OID_FLUSH_CTL}
TIME_VALID_OID_FLUSH_CRL = LPCSTR(2);
{$EXTERNALSYM TIME_VALID_OID_FLUSH_CRL}
TIME_VALID_OID_FLUSH_CRL_FROM_CERT = LPCSTR(3);
{$EXTERNALSYM TIME_VALID_OID_FLUSH_CRL_FROM_CERT}
//-------------------------------------------------------------------------
// Data Protection APIs
//-------------------------------------------------------------------------
//
// Data protection APIs enable applications to easily secure data.
//
// The base provider provides protection based on the users' logon
// credentials. The data secured with these APIs follow the same
// roaming characteristics as HKCU -- if HKCU roams, the data
// protected by the base provider may roam as well. This makes
// the API ideal for the munging of data stored in the registry.
//
//
// Prompt struct -- what to tell users about the access
//
type
PCRYPTPROTECT_PROMPTSTRUCT = ^CRYPTPROTECT_PROMPTSTRUCT;
{$EXTERNALSYM PCRYPTPROTECT_PROMPTSTRUCT}
_CRYPTPROTECT_PROMPTSTRUCT = record
cbSize: DWORD;
dwPromptFlags: DWORD;
hwndApp: HWND;
szPrompt: LPCWSTR;
end;
{$EXTERNALSYM _CRYPTPROTECT_PROMPTSTRUCT}
CRYPTPROTECT_PROMPTSTRUCT = _CRYPTPROTECT_PROMPTSTRUCT;
{$EXTERNALSYM CRYPTPROTECT_PROMPTSTRUCT}
TCryptProtectPromptStruct = CRYPTPROTECT_PROMPTSTRUCT;
PCryptProtectPromptStruct = PCRYPTPROTECT_PROMPTSTRUCT;
//
// base provider action
//
const
CRYPTPROTECT_DEFAULT_PROVIDER: GUID = (
D1:$df9d8cd0; D2:$1501; D3:$11d1; D4:($8c, $7a, $00, $c0, $4f, $c2, $97, $eb));
{$EXTERNALSYM CRYPTPROTECT_DEFAULT_PROVIDER}
//
// CryptProtect PromptStruct dwPromtFlags
//
//
// prompt on unprotect
CRYPTPROTECT_PROMPT_ON_UNPROTECT = $1; // 1<<0
{$EXTERNALSYM CRYPTPROTECT_PROMPT_ON_UNPROTECT}
//
// prompt on protect
CRYPTPROTECT_PROMPT_ON_PROTECT = $2; // 1<<1
{$EXTERNALSYM CRYPTPROTECT_PROMPT_ON_PROTECT}
CRYPTPROTECT_PROMPT_RESERVED = $04; // reserved, do not use.
{$EXTERNALSYM CRYPTPROTECT_PROMPT_RESERVED}
//
// only allow strong variant UI protection (user supplied password currently).
CRYPTPROTECT_PROMPT_STRONG = $08; // 1<<3
{$EXTERNALSYM CRYPTPROTECT_PROMPT_STRONG}
//
// CryptProtectData and CryptUnprotectData dwFlags
//
// for remote-access situations where ui is not an option
// if UI was specified on protect or unprotect operation, the call
// will fail and GetLastError() will indicate ERROR_PASSWORD_RESTRICTION
CRYPTPROTECT_UI_FORBIDDEN = $1;
{$EXTERNALSYM CRYPTPROTECT_UI_FORBIDDEN}
//
// per machine protected data -- any user on machine where CryptProtectData
// took place may CryptUnprotectData
CRYPTPROTECT_LOCAL_MACHINE = $4;
{$EXTERNALSYM CRYPTPROTECT_LOCAL_MACHINE}
//
// force credential synchronize during CryptProtectData()
// Synchronize is only operation that occurs during this operation
CRYPTPROTECT_CRED_SYNC = $8;
{$EXTERNALSYM CRYPTPROTECT_CRED_SYNC}
// flags reserved for system use
CRYPTPROTECT_FIRST_RESERVED_FLAGVAL = $0FFFFFFF;
{$EXTERNALSYM CRYPTPROTECT_FIRST_RESERVED_FLAGVAL}
CRYPTPROTECT_LAST_RESERVED_FLAGVAL = DWORD($FFFFFFFF);
{$EXTERNALSYM CRYPTPROTECT_LAST_RESERVED_FLAGVAL}
//
// flags specific to base provider
//
function CryptProtectData(pDataIn: PDATA_BLOB; szDataDescr: LPCWSTR;
pOptionalEntropy: PDATA_BLOB; pvReserved: PVOID;
pPromptStruct: PCRYPTPROTECT_PROMPTSTRUCT; dwFlags: DWORD; pDataOut: PDATA_BLOB): BOOL; stdcall;
{$EXTERNALSYM CryptProtectData}
function CryptUnprotectData(pDataIn: PDATA_BLOB; ppszDataDescr: LPLPWSTR;
pOptionalEntropy: PDATA_BLOB; pvReserved: PVOID;
pPromptStruct: PCRYPTPROTECT_PROMPTSTRUCT; dwFlags: DWORD; pDataOut: PDATA_BLOB): BOOL; stdcall;
{$EXTERNALSYM CryptUnprotectData}
//+=========================================================================
// Helper functions to build certificates
//==========================================================================
//+-------------------------------------------------------------------------
//
// Builds a self-signed certificate and returns a PCCERT_CONTEXT representing
// the certificate. A hProv must be specified to build the cert context.
//
// pSubjectIssuerBlob is the DN for the certifcate. If an alternate subject
// name is desired it must be specified as an extension in the pExtensions
// parameter. pSubjectIssuerBlob can NOT be NULL, so minimually an empty DN
// must be specified.
//
// By default:
// pKeyProvInfo - The CSP is queried for the KeyProvInfo parameters. Only the Provider,
// Provider Type and Container is queried. Many CSPs don't support these
// queries and will cause a failure. In such cases the pKeyProvInfo
// must be specified (RSA BASE works fine).
//
// pSignatureAlgorithm - will default to SHA1RSA
// pStartTime will default to the current time
// pEndTime will default to 1 year
// pEntensions will be empty.
//
// The returned PCCERT_CONTEXT will reference the private keys by setting the
// CERT_KEY_PROV_INFO_PROP_ID. However, if this property is not desired specify the
// CERT_CREATE_SELFSIGN_NO_KEY_INFO in dwFlags.
//
// If the cert being built is only a dummy placeholder cert for speed it may not
// need to be signed. Signing of the cert is skipped if CERT_CREATE_SELFSIGN_NO_SIGN
// is specified in dwFlags.
//
//--------------------------------------------------------------------------
function CertCreateSelfSignCertificate(hProv: HCRYPTPROV;
pSubjectIssuerBlob: PCERT_NAME_BLOB; dwFlags: DWORD;
pKeyProvInfo: PCRYPT_KEY_PROV_INFO; pSignatureAlgorithm: PCRYPT_ALGORITHM_IDENTIFIER;
pStartTime, pEndTime: PSYSTEMTIME; pExtensions: PCERT_EXTENSIONS): PCCERT_CONTEXT; stdcall;
{$EXTERNALSYM CertCreateSelfSignCertificate}
const
CERT_CREATE_SELFSIGN_NO_SIGN = 1;
{$EXTERNALSYM CERT_CREATE_SELFSIGN_NO_SIGN}
CERT_CREATE_SELFSIGN_NO_KEY_INFO = 2;
{$EXTERNALSYM CERT_CREATE_SELFSIGN_NO_KEY_INFO}
//+=========================================================================
// Key Identifier Property Data Structures and APIs
//==========================================================================
//+-------------------------------------------------------------------------
// Get the property for the specified Key Identifier.
//
// The Key Identifier is the SHA1 hash of the encoded CERT_PUBLIC_KEY_INFO.
// The Key Identifier for a certificate can be obtained by getting the
// certificate's CERT_KEY_IDENTIFIER_PROP_ID. The
// CryptCreateKeyIdentifierFromCSP API can be called to create the Key
// Identifier from a CSP Public Key Blob.
//
// A Key Identifier can have the same properties as a certificate context.
// CERT_KEY_PROV_INFO_PROP_ID is the property of most interest.
// For CERT_KEY_PROV_INFO_PROP_ID, pvData points to a CRYPT_KEY_PROV_INFO
// structure. Elements pointed to by fields in the pvData structure follow the
// structure. Therefore, *pcbData will exceed the size of the structure.
//
// If CRYPT_KEYID_ALLOC_FLAG is set, then, *pvData is updated with a
// pointer to allocated memory. LocalFree() must be called to free the
// allocated memory.
//
// By default, searches the CurrentUser's list of Key Identifiers.
// CRYPT_KEYID_MACHINE_FLAG can be set to search the LocalMachine's list
// of Key Identifiers. When CRYPT_KEYID_MACHINE_FLAG is set, pwszComputerName
// can also be set to specify the name of a remote computer to be searched
// instead of the local machine.
//--------------------------------------------------------------------------
function CryptGetKeyIdentifierProperty(pKeyIdentifier: PCRYPT_HASH_BLOB;
dwPropId: DWORD; dwFlags: DWORD; pwszComputerName: LPCWSTR; pvReserved: Pointer;
pvData: Pointer; var pcbData: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptGetKeyIdentifierProperty}
// When the following flag is set, searches the LocalMachine instead of the
// CurrentUser. This flag is applicable to all the KeyIdentifierProperty APIs.
const
CRYPT_KEYID_MACHINE_FLAG = $00000020;
{$EXTERNALSYM CRYPT_KEYID_MACHINE_FLAG}
// When the following flag is set, *pvData is updated with a pointer to
// allocated memory. LocalFree() must be called to free the allocated memory.
CRYPT_KEYID_ALLOC_FLAG = $00008000;
{$EXTERNALSYM CRYPT_KEYID_ALLOC_FLAG}
//+-------------------------------------------------------------------------
// Set the property for the specified Key Identifier.
//
// For CERT_KEY_PROV_INFO_PROP_ID pvData points to the
// CRYPT_KEY_PROV_INFO data structure. For all other properties, pvData
// points to a CRYPT_DATA_BLOB.
//
// Setting pvData == NULL, deletes the property.
//
// Set CRYPT_KEYID_MACHINE_FLAG to set the property for a LocalMachine
// Key Identifier. Set pwszComputerName, to select a remote computer.
//
// If CRYPT_KEYID_DELETE_FLAG is set, the Key Identifier and all its
// properties is deleted.
//
// If CRYPT_KEYID_SET_NEW_FLAG is set, the set fails if the property already
// exists. For an existing property, FALSE is returned with LastError set to
// CRYPT_E_EXISTS.
//--------------------------------------------------------------------------
function CryptSetKeyIdentifierProperty(pKeyIdentifier: PCRYPT_HASH_BLOB;
dwPropId: DWORD; dwFlags: DWORD; pwszComputerName: LPCWSTR; pvReserved: Pointer;
pvData: Pointer): BOOL; stdcall;
{$EXTERNALSYM CryptSetKeyIdentifierProperty}
// When the following flag is set, the Key Identifier and all its properties
// are deleted.
const
CRYPT_KEYID_DELETE_FLAG = $00000010;
{$EXTERNALSYM CRYPT_KEYID_DELETE_FLAG}
// When the following flag is set, the set fails if the property already
// exists.
CRYPT_KEYID_SET_NEW_FLAG = $00002000;
{$EXTERNALSYM CRYPT_KEYID_SET_NEW_FLAG}
//+-------------------------------------------------------------------------
// For CERT_KEY_PROV_INFO_PROP_ID, rgppvData[] points to a
// CRYPT_KEY_PROV_INFO.
//
// Return FALSE to stop the enumeration.
//--------------------------------------------------------------------------
type
PFN_CRYPT_ENUM_KEYID_PROP = function(pKeyIdentifier: PCRYPT_HASH_BLOB;
dwFlags: DWORD; pvReserved: Pointer; pvArg: Pointer; cProp: DWORD;
rgdwPropId: LPDWORD; rgpvData: Pointer; rgcbData: LPDWORD): BOOL; stdcall;
{$EXTERNALSYM PFN_CRYPT_ENUM_KEYID_PROP}
PFnCryptEnumKeyIdProp = PFN_CRYPT_ENUM_KEYID_PROP;
//+-------------------------------------------------------------------------
// Enumerate the Key Identifiers.
//
// If pKeyIdentifier is NULL, enumerates all Key Identifers. Otherwise,
// calls the callback for the specified KeyIdentifier. If dwPropId is
// 0, calls the callback with all the properties. Otherwise, only calls
// the callback with the specified property (cProp = 1).
// Furthermore, when dwPropId is specified, skips KeyIdentifiers not
// having the property.
//
// Set CRYPT_KEYID_MACHINE_FLAG to enumerate the LocalMachine
// Key Identifiers. Set pwszComputerName, to enumerate Key Identifiers on
// a remote computer.
//--------------------------------------------------------------------------
function CryptEnumKeyIdentifierProperties(pKeyIdentifier: PCRYPT_HASH_BLOB;
dwPropId: DWORD; dwFlags: DWORD; pwszComputerName: LPCWSTR; pvReserved: Pointer;
pvArg: Pointer; pfnEnum: PFN_CRYPT_ENUM_KEYID_PROP): BOOL; stdcall;
{$EXTERNALSYM CryptEnumKeyIdentifierProperties}
//+-------------------------------------------------------------------------
// Create a KeyIdentifier from the CSP Public Key Blob.
//
// Converts the CSP PUBLICKEYSTRUC into a X.509 CERT_PUBLIC_KEY_INFO and
// encodes. The encoded CERT_PUBLIC_KEY_INFO is SHA1 hashed to obtain
// the Key Identifier.
//
// By default, the pPubKeyStruc->aiKeyAlg is used to find the appropriate
// public key Object Identifier. pszPubKeyOID can be set to override
// the default OID obtained from the aiKeyAlg.
//--------------------------------------------------------------------------
function CryptCreateKeyIdentifierFromCSP(dwCertEncodingType: DWORD;
pszPubKeyOID: LPCSTR; pPubKeyStruc: PPUBLICKEYSTRUC; cbPubKeyStruc: DWORD;
dwFlags: DWORD; pvReserved: Pointer; pbHash: LPBYTE; pcbHash: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptCreateKeyIdentifierFromCSP}
//+=========================================================================
// Certificate Chaining Infrastructure
//==========================================================================
//
// The chain engine defines the store namespace and cache partitioning for
// the Certificate Chaining infrastructure. A default chain engine
// is defined for the process which uses all default system stores e.g.
// Root, CA, Trust, for chain building and caching. If an application
// wishes to define its own store namespace or have its own partitioned
// cache then it can create its own chain engine. It is advisable to create
// a chain engine at application startup and use it throughout the lifetime
// of the application in order to get optimal caching behavior
//
type
HCERTCHAINENGINE = HANDLE;
{$EXTERNALSYM HCERTCHAINENGINE}
const
HCCE_CURRENT_USER = HCERTCHAINENGINE(0);
{$EXTERNALSYM HCCE_CURRENT_USER}
HCCE_LOCAL_MACHINE = HCERTCHAINENGINE($1);
{$EXTERNALSYM HCCE_LOCAL_MACHINE}
//
// Create a certificate chain engine.
//
//
// Configuration parameters for the certificate chain engine
//
// hRestrictedRoot - restrict the root store (must be a subset of "Root")
//
// hRestrictedTrust - restrict the store for CTLs
//
// hRestrictedOther - restrict the store for certs and CRLs
//
// cAdditionalStore, rghAdditionalStore - additional stores
//
// NOTE: The algorithm used to define the stores for the engine is as
// follows:
//
// hRoot = hRestrictedRoot or System Store "Root"
//
// hTrust = hRestrictedTrust or hWorld (defined later)
//
// hOther = hRestrictedOther or (hRestrictedTrust == NULL) ? hWorld :
// hRestrictedTrust + hWorld
//
// hWorld = hRoot + "CA" + "My" + "Trust" + rghAdditionalStore
//
// dwFlags - flags
//
// CERT_CHAIN_CACHE_END_CERT - information will be cached on
// the end cert as well as the other
// certs in the chain
//
// CERT_CHAIN_THREAD_STORE_SYNC - use separate thread for store syncs
// and related cache updates
//
// CERT_CHAIN_CACHE_ONLY_URL_RETRIEVAL - don't hit the wire to get
// URL based objects
//
// dwUrlRetrievalTimeout - timeout for wire based URL object retrievals
//
const
CERT_CHAIN_CACHE_END_CERT = $00000001;
{$EXTERNALSYM CERT_CHAIN_CACHE_END_CERT}
CERT_CHAIN_THREAD_STORE_SYNC = $00000002;
{$EXTERNALSYM CERT_CHAIN_THREAD_STORE_SYNC}
CERT_CHAIN_CACHE_ONLY_URL_RETRIEVAL = $00000004;
{$EXTERNALSYM CERT_CHAIN_CACHE_ONLY_URL_RETRIEVAL}
CERT_CHAIN_USE_LOCAL_MACHINE_STORE = $00000008;
{$EXTERNALSYM CERT_CHAIN_USE_LOCAL_MACHINE_STORE}
CERT_CHAIN_ENABLE_CACHE_AUTO_UPDATE = $00000010;
{$EXTERNALSYM CERT_CHAIN_ENABLE_CACHE_AUTO_UPDATE}
type
PCERT_CHAIN_ENGINE_CONFIG = ^CERT_CHAIN_ENGINE_CONFIG;
{$EXTERNALSYM PCERT_CHAIN_ENGINE_CONFIG}
_CERT_CHAIN_ENGINE_CONFIG = record
cbSize: DWORD;
hRestrictedRoot: HCERTSTORE;
hRestrictedTrust: HCERTSTORE;
hRestrictedOther: HCERTSTORE;
cAdditionalStore: DWORD;
rghAdditionalStore: PHCERTSTORE;
dwFlags: DWORD;
dwUrlRetrievalTimeout: DWORD;
MaximumCachedCertificates: DWORD;
CycleDetectionModulus: DWORD;
end;
{$EXTERNALSYM _CERT_CHAIN_ENGINE_CONFIG}
CERT_CHAIN_ENGINE_CONFIG = _CERT_CHAIN_ENGINE_CONFIG;
{$EXTERNALSYM CERT_CHAIN_ENGINE_CONFIG}
TCertChainEngineConfig = CERT_CHAIN_ENGINE_CONFIG;
PCertChainEngineConfig = PCERT_CHAIN_ENGINE_CONFIG;
function CertCreateCertificateChainEngine(pConfig: PCERT_CHAIN_ENGINE_CONFIG;
var phChainEngine: HCERTCHAINENGINE): BOOL; stdcall;
{$EXTERNALSYM CertCreateCertificateChainEngine}
//
// Free a certificate trust engine
//
procedure CertFreeCertificateChainEngine(hChainEngine: HCERTCHAINENGINE); stdcall;
{$EXTERNALSYM CertFreeCertificateChainEngine}
//
// Resync the certificate chain engine. This resync's the stores backing
// the engine and updates the engine caches.
//
function CertResyncCertificateChainEngine(hChainEngine: HCERTCHAINENGINE): BOOL; stdcall;
{$EXTERNALSYM CertResyncCertificateChainEngine}
//
// When an application requests a certificate chain, the data structure
// returned is in the form of a CERT_CHAIN_CONTEXT. This contains
// an array of CERT_SIMPLE_CHAIN where each simple chain goes from
// an end cert to a self signed cert and the chain context connects simple
// chains via trust lists. Each simple chain contains the chain of
// certificates, summary trust information about the chain and trust information
// about each certificate element in the chain.
//
//
// Trust status bits
//
type
PCERT_TRUST_STATUS = ^CERT_TRUST_STATUS;
{$EXTERNALSYM PCERT_TRUST_STATUS}
_CERT_TRUST_STATUS = record
dwErrorStatus: DWORD;
dwInfoStatus: DWORD;
end;
{$EXTERNALSYM _CERT_TRUST_STATUS}
CERT_TRUST_STATUS = _CERT_TRUST_STATUS;
{$EXTERNALSYM CERT_TRUST_STATUS}
TCertTrustStatus = CERT_TRUST_STATUS;
PCertTrustStatus = PCERT_TRUST_STATUS;
//
// The following are error status bits
//
// These can be applied to certificates and chains
const
CERT_TRUST_NO_ERROR = $00000000;
{$EXTERNALSYM CERT_TRUST_NO_ERROR}
CERT_TRUST_IS_NOT_TIME_VALID = $00000001;
{$EXTERNALSYM CERT_TRUST_IS_NOT_TIME_VALID}
CERT_TRUST_IS_NOT_TIME_NESTED = $00000002;
{$EXTERNALSYM CERT_TRUST_IS_NOT_TIME_NESTED}
CERT_TRUST_IS_REVOKED = $00000004;
{$EXTERNALSYM CERT_TRUST_IS_REVOKED}
CERT_TRUST_IS_NOT_SIGNATURE_VALID = $00000008;
{$EXTERNALSYM CERT_TRUST_IS_NOT_SIGNATURE_VALID}
CERT_TRUST_IS_NOT_VALID_FOR_USAGE = $00000010;
{$EXTERNALSYM CERT_TRUST_IS_NOT_VALID_FOR_USAGE}
CERT_TRUST_IS_UNTRUSTED_ROOT = $00000020;
{$EXTERNALSYM CERT_TRUST_IS_UNTRUSTED_ROOT}
CERT_TRUST_REVOCATION_STATUS_UNKNOWN = $00000040;
{$EXTERNALSYM CERT_TRUST_REVOCATION_STATUS_UNKNOWN}
CERT_TRUST_IS_CYCLIC = $00000080;
{$EXTERNALSYM CERT_TRUST_IS_CYCLIC}
// These can be applied to chains only
CERT_TRUST_IS_PARTIAL_CHAIN = $00010000;
{$EXTERNALSYM CERT_TRUST_IS_PARTIAL_CHAIN}
CERT_TRUST_CTL_IS_NOT_TIME_VALID = $00020000;
{$EXTERNALSYM CERT_TRUST_CTL_IS_NOT_TIME_VALID}
CERT_TRUST_CTL_IS_NOT_SIGNATURE_VALID = $00040000;
{$EXTERNALSYM CERT_TRUST_CTL_IS_NOT_SIGNATURE_VALID}
CERT_TRUST_CTL_IS_NOT_VALID_FOR_USAGE = $00080000;
{$EXTERNALSYM CERT_TRUST_CTL_IS_NOT_VALID_FOR_USAGE}
//
// The following are info status bits
//
// These can be applied to certificates only
CERT_TRUST_HAS_EXACT_MATCH_ISSUER = $00000001;
{$EXTERNALSYM CERT_TRUST_HAS_EXACT_MATCH_ISSUER}
CERT_TRUST_HAS_KEY_MATCH_ISSUER = $00000002;
{$EXTERNALSYM CERT_TRUST_HAS_KEY_MATCH_ISSUER}
CERT_TRUST_HAS_NAME_MATCH_ISSUER = $00000004;
{$EXTERNALSYM CERT_TRUST_HAS_NAME_MATCH_ISSUER}
CERT_TRUST_IS_SELF_SIGNED = $00000008;
{$EXTERNALSYM CERT_TRUST_IS_SELF_SIGNED}
// These can be applied to chains only
CERT_TRUST_IS_COMPLEX_CHAIN = $00010000;
{$EXTERNALSYM CERT_TRUST_IS_COMPLEX_CHAIN}
//
// Each certificate context in a simple chain has a corresponding chain element
// in the simple chain context
//
// dwErrorStatus has CERT_TRUST_IS_REVOKED, pRevocationInfo set
// dwErrorStatus has CERT_TRUST_REVOCATION_STATUS_UNKNOWN, pRevocationInfo set
//
// BUGBUG: Note that the post processing revocation supported in the first
// version only sets cbSize and dwRevocationResult. Everything else
// is NULL
//
//
// Revocation Information
//
type
PCERT_REVOCATION_INFO = ^CERT_REVOCATION_INFO;
{$EXTERNALSYM PCERT_REVOCATION_INFO}
_CERT_REVOCATION_INFO = record
cbSize: DWORD;
dwRevocationResult: DWORD;
pszRevocationOid: LPCSTR;
pvOidSpecificInfo: LPVOID;
end;
{$EXTERNALSYM _CERT_REVOCATION_INFO}
CERT_REVOCATION_INFO = _CERT_REVOCATION_INFO;
{$EXTERNALSYM CERT_REVOCATION_INFO}
TCertRevocationInfo = CERT_REVOCATION_INFO;
PCertRevocationInfo = PCERT_REVOCATION_INFO;
//
// Trust List Information
//
PCERT_TRUST_LIST_INFO = ^CERT_TRUST_LIST_INFO;
{$EXTERNALSYM PCERT_TRUST_LIST_INFO}
_CERT_TRUST_LIST_INFO = record
cbSize: DWORD;
pCtlEntry: PCTL_ENTRY;
pCtlContext: PCCTL_CONTEXT;
end;
{$EXTERNALSYM _CERT_TRUST_LIST_INFO}
CERT_TRUST_LIST_INFO = _CERT_TRUST_LIST_INFO;
{$EXTERNALSYM CERT_TRUST_LIST_INFO}
TCertTrustListInfo = CERT_TRUST_LIST_INFO;
PCertTrustListInfo = PCERT_TRUST_LIST_INFO;
//
// Chain Element
//
PCERT_CHAIN_ELEMENT = ^CERT_CHAIN_ELEMENT;
{$EXTERNALSYM PCERT_CHAIN_ELEMENT}
_CERT_CHAIN_ELEMENT = record
cbSize: DWORD;
pCertContext: PCCERT_CONTEXT;
TrustStatus: CERT_TRUST_STATUS;
pRevocationInfo: PCERT_REVOCATION_INFO;
end;
{$EXTERNALSYM _CERT_CHAIN_ELEMENT}
CERT_CHAIN_ELEMENT = _CERT_CHAIN_ELEMENT;
{$EXTERNALSYM CERT_CHAIN_ELEMENT}
TCertChainElement = CERT_CHAIN_ELEMENT;
PCertChainElement = PCERT_CHAIN_ELEMENT;
//
// The simple chain is an array of chain elements and a summary trust status
// for the chain
//
// rgpElements[0] is the end certificate chain element
//
// rgpElements[cElement-1] is the self-signed "root" certificate chain element
//
PCERT_SIMPLE_CHAIN = ^CERT_SIMPLE_CHAIN;
{$EXTERNALSYM PCERT_SIMPLE_CHAIN}
_CERT_SIMPLE_CHAIN = record
cbSize: DWORD;
TrustStatus: CERT_TRUST_STATUS;
cElement: DWORD;
rgpElement: PCERT_CHAIN_ELEMENT;
pTrustListInfo: PCERT_TRUST_LIST_INFO;
end;
{$EXTERNALSYM _CERT_SIMPLE_CHAIN}
CERT_SIMPLE_CHAIN = _CERT_SIMPLE_CHAIN;
{$EXTERNALSYM CERT_SIMPLE_CHAIN}
TCertSimpleChain = CERT_SIMPLE_CHAIN;
PCertSimpleChain = PCERT_SIMPLE_CHAIN;
//
// And the chain context contains an array of simple chains and summary trust
// status for all the connected simple chains
//
// rgpChains[0] is the end certificate simple chain
//
// rgpChains[cChain-1] is the final (possibly trust list signer) chain which
// ends in a certificate which is contained in the root store
//
PCERT_CHAIN_CONTEXT = ^CERT_CHAIN_CONTEXT;
{$EXTERNALSYM PCERT_CHAIN_CONTEXT}
_CERT_CHAIN_CONTEXT = record
cbSize: DWORD;
TrustStatus: CERT_TRUST_STATUS;
cChain: DWORD;
rgpChain: PCERT_SIMPLE_CHAIN;
end;
{$EXTERNALSYM _CERT_CHAIN_CONTEXT}
CERT_CHAIN_CONTEXT = _CERT_CHAIN_CONTEXT;
{$EXTERNALSYM CERT_CHAIN_CONTEXT}
TCertChainContext = CERT_CHAIN_CONTEXT;
PCertChainContext = PCERT_CHAIN_CONTEXT;
PCCERT_CHAIN_CONTEXT = ^CERT_CHAIN_CONTEXT;
{$EXTERNALSYM PCCERT_CHAIN_CONTEXT}
PPCCERT_CHAIN_CONTEXT = ^PCERT_CHAIN_CONTEXT;
{$NODEFINE PPCCERT_CHAIN_CONTEXT}
//
// When building a chain, the there are various parameters used for finding
// issuing certificates and trust lists. They are identified in the
// following structure
//
// Default usage match type is AND with value zero
const
USAGE_MATCH_TYPE_AND = $00000000;
{$EXTERNALSYM USAGE_MATCH_TYPE_AND}
USAGE_MATCH_TYPE_OR = $00000001;
{$EXTERNALSYM USAGE_MATCH_TYPE_OR}
type
PCERT_USAGE_MATCH = ^CERT_USAGE_MATCH;
{$EXTERNALSYM PCERT_USAGE_MATCH}
_CERT_USAGE_MATCH = record
dwType: DWORD;
Usage: CERT_ENHKEY_USAGE;
end;
{$EXTERNALSYM _CERT_USAGE_MATCH}
CERT_USAGE_MATCH = _CERT_USAGE_MATCH;
{$EXTERNALSYM CERT_USAGE_MATCH}
TCertUsageMatch = CERT_USAGE_MATCH;
PCertUsageMatch = PCERT_USAGE_MATCH;
PCTL_USAGE_MATCH = ^CTL_USAGE_MATCH;
{$EXTERNALSYM PCTL_USAGE_MATCH}
_CTL_USAGE_MATCH = record
dwType: DWORD;
Usage: CTL_USAGE;
end;
{$EXTERNALSYM _CTL_USAGE_MATCH}
CTL_USAGE_MATCH = _CTL_USAGE_MATCH;
{$EXTERNALSYM CTL_USAGE_MATCH}
TCtlUsageMatch = CTL_USAGE_MATCH;
PCtlUsageMatch = PCTL_USAGE_MATCH;
PCERT_CHAIN_PARA = ^CERT_CHAIN_PARA;
{$EXTERNALSYM PCERT_CHAIN_PARA}
_CERT_CHAIN_PARA = record
cbSize: DWORD;
RequestedUsage: CERT_USAGE_MATCH;
end;
{$EXTERNALSYM _CERT_CHAIN_PARA}
CERT_CHAIN_PARA = _CERT_CHAIN_PARA;
{$EXTERNALSYM CERT_CHAIN_PARA}
TCertChainPara = CERT_CHAIN_PARA;
PCertChainPara = PCERT_CHAIN_PARA;
//
// The following API is used for retrieving certificate chains
//
// Parameters:
//
// hChainEngine - the chain engine (namespace and cache) to use, NULL
// mean use the default chain engine
//
// pCertContext - the context we are retrieving the chain for, it
// will be the zero index element in the chain
//
// pTime - the point in time that we want the chain validated
// for. Note that the time does not affect trust list,
// revocation, or root store checking. NULL means use
// the current system time
//
// hAdditionalStore - additional store to use when looking up objects
//
// pChainPara - parameters for chain building
//
// dwFlags - flags such as should revocation checking be done
// on the chain?
//
// pvReserved - reserved parameter, must be NULL
//
// ppChainContext - chain context returned
//
// CERT_CHAIN_CACHE_END_CERT can be used here as well
// Revocation flags are in the high nibble
const
CERT_CHAIN_REVOCATION_CHECK_END_CERT = $10000000;
{$EXTERNALSYM CERT_CHAIN_REVOCATION_CHECK_END_CERT}
CERT_CHAIN_REVOCATION_CHECK_CHAIN = $20000000;
{$EXTERNALSYM CERT_CHAIN_REVOCATION_CHECK_CHAIN}
CERT_CHAIN_REVOCATION_CHECK_CHAIN_EXCLUDE_ROOT = $40000000;
{$EXTERNALSYM CERT_CHAIN_REVOCATION_CHECK_CHAIN_EXCLUDE_ROOT}
CERT_CHAIN_REVOCATION_CHECK_CACHE_ONLY = DWORD($80000000);
{$EXTERNALSYM CERT_CHAIN_REVOCATION_CHECK_CACHE_ONLY}
function CertGetCertificateChain(hChainEngine: HCERTCHAINENGINE;
pCertContext: PCCERT_CONTEXT; pTime: LPFILETIME; hAdditionalStore: HCERTSTORE;
pChainPara: PCERT_CHAIN_PARA; dwFlags: DWORD; pvReserved: LPVOID;
ppChainContext: PPCCERT_CHAIN_CONTEXT): BOOL; stdcall;
{$EXTERNALSYM CertGetCertificateChain}
//
// Free a certificate chain
//
procedure CertFreeCertificateChain(pChainContext: PCCERT_CHAIN_CONTEXT); stdcall;
{$EXTERNALSYM CertFreeCertificateChain}
//
// Duplicate (add a reference to) a certificate chain
//
function CertDuplicateCertificateChain(pChainContext: PCCERT_CHAIN_CONTEXT): PCCERT_CHAIN_CONTEXT; stdcall;
{$EXTERNALSYM CertDuplicateCertificateChain}
//
// Specific Revocation Type OID and structure definitions
//
//
// CRL Revocation OID
//
const
REVOCATION_OID_CRL_REVOCATION = LPCSTR(1);
{$EXTERNALSYM REVOCATION_OID_CRL_REVOCATION}
//
// For the CRL revocation OID the pvRevocationPara is NULL
//
//
// CRL Revocation Info
//
type
PCRL_REVOCATION_INFO = ^CRL_REVOCATION_INFO;
{$EXTERNALSYM PCRL_REVOCATION_INFO}
_CRL_REVOCATION_INFO = record
pCrlEntry: PCRL_ENTRY;
pCrlContext: PCCRL_CONTEXT;
pCrlIssuerChain: PCCERT_CHAIN_CONTEXT;
end;
{$EXTERNALSYM _CRL_REVOCATION_INFO}
CRL_REVOCATION_INFO = _CRL_REVOCATION_INFO;
{$EXTERNALSYM CRL_REVOCATION_INFO}
TCrlRevocationInfo = CRL_REVOCATION_INFO;
PCrlRevocationInfo = PCRL_REVOCATION_INFO;
//+-------------------------------------------------------------------------
// Find the first or next certificate chain context in the store.
//
// The chain context is found according to the dwFindFlags, dwFindType and
// its pvFindPara. See below for a list of the find types and its parameters.
//
// If the first or next chain context isn't found, NULL is returned.
// Otherwise, a pointer to a read only CERT_CHAIN_CONTEXT is returned.
// CERT_CHAIN_CONTEXT must be freed by calling CertFreeCertificateChain
// or is freed when passed as the
// pPrevChainContext on a subsequent call. CertDuplicateCertificateChain
// can be called to make a duplicate.
//
// pPrevChainContext MUST BE NULL on the first
// call to find the chain context. To find the next chain context, the
// pPrevChainContext is set to the CERT_CHAIN_CONTEXT returned by a previous
// call.
//
// NOTE: a NON-NULL pPrevChainContext is always CertFreeCertificateChain'ed by
// this function, even for an error.
//--------------------------------------------------------------------------
function CertFindChainInStore(hCertStore: HCERTSTORE; dwCertEncodingType: DWORD;
dwFindFlags: DWORD; dwFindType: DWORD; pvFindPara: Pointer;
pPrevChainContext: PCCERT_CHAIN_CONTEXT): PCCERT_CHAIN_CONTEXT; stdcall;
{$EXTERNALSYM CertFindChainInStore}
const
CERT_CHAIN_FIND_BY_ISSUER = 1;
{$EXTERNALSYM CERT_CHAIN_FIND_BY_ISSUER}
//+-------------------------------------------------------------------------
// CERT_CHAIN_FIND_BY_ISSUER
//
// Find a certificate chain having a private key for the end certificate and
// matching one of the given issuer names. A matching dwKeySpec and
// enhanced key usage can also be specified. Additionally a callback can
// be provided for even more caller provided filtering before building the
// chain.
//
// By default, only the issuers in the first simple chain are compared
// for a name match. CERT_CHAIN_FIND_BY_ISSUER_COMPLEX_CHAIN_FLAG can
// be set in dwFindFlags to match issuers in all the simple chains.
//
// CERT_CHAIN_FIND_BY_ISSUER_NO_KEY_FLAG can be set in dwFindFlags to
// not check if the end certificate has a private key.
//
// CERT_CHAIN_FIND_BY_ISSUER_COMPARE_KEY_FLAG can be set in dwFindFlags
// to compare the public key in the end certificate with the crypto
// provider's public key. The dwAcquirePrivateKeyFlags can be set
// in CERT_CHAIN_FIND_BY_ISSUER_PARA to enable caching of the private key's
// HKEY returned by the CSP.
//
// If dwCertEncodingType == 0, defaults to X509_ASN_ENCODING for the
// array of encoded issuer names.
//
// By default, the hCertStore passed to CertFindChainInStore, is passed
// as an additional store to CertGetCertificateChain.
// CERT_CHAIN_FIND_BY_ISSUER_CACHE_ONLY_FLAG can be set in dwFindFlags
// to improve performance by only searching the cached system stores
// (root, my, ca, trust) to find the issuer certificates. If you are doing
// a find in the "my" system store, than, this flag should be set to
// improve performance.
//
// Setting CERT_CHAIN_FIND_BY_ISSUER_LOCAL_MACHINE_FLAG in dwFindFlags
// restricts CertGetCertificateChain to search the Local Machine
// cached system stores instead of the Current User's.
//
// Setting CERT_CHAIN_FIND_BY_ISSUER_CACHE_ONLY_URL_FLAG in dwFindFlags
// restricts CertGetCertificateChain to only search the URL cache
// and not hit the wire.
//--------------------------------------------------------------------------
// Returns FALSE to skip this certificate. Otherwise, returns TRUE to
// build a chain for this certificate.
type
PFN_CERT_CHAIN_FIND_BY_ISSUER_CALLBACK = function(pCert: PCCERT_CONTEXT;
pvFindArg: Pointer): BOOL; stdcall;
{$EXTERNALSYM PFN_CERT_CHAIN_FIND_BY_ISSUER_CALLBACK}
PFnCertChainFindByIssuerCallback = PFN_CERT_CHAIN_FIND_BY_ISSUER_CALLBACK;
PCERT_CHAIN_FIND_BY_ISSUER_PARA = ^CERT_CHAIN_FIND_BY_ISSUER_PARA;
{$EXTERNALSYM PCERT_CHAIN_FIND_BY_ISSUER_PARA}
_CERT_CHAIN_FIND_BY_ISSUER_PARA = record
cbSize: DWORD;
// If pszUsageIdentifier == NULL, matches any usage.
pszUsageIdentifier: LPCSTR;
// If dwKeySpec == 0, matches any KeySpec
dwKeySpec: DWORD;
// When CERT_CHAIN_FIND_BY_ISSUER_COMPARE_KEY_FLAG is set in dwFindFlags,
// CryptAcquireCertificatePrivateKey is called to do the public key
// comparison. The following flags can be set to enable caching
// of the acquired private key. See the API for more details on these
// flags.
dwAcquirePrivateKeyFlags: DWORD;
// Pointer to an array of X509, ASN.1 encoded issuer name blobs. If
// cIssuer == 0, matches any issuer
cIssuer: DWORD;
rgIssuer: PCERT_NAME_BLOB;
// If NULL or Callback returns TRUE, builds the chain for the end
// certificate having a private key with the specified KeySpec and
// enhanced key usage.
pfnFindCallback: PFN_CERT_CHAIN_FIND_BY_ISSUER_CALLBACK;
pvFindArg: Pointer;
end;
{$EXTERNALSYM _CERT_CHAIN_FIND_BY_ISSUER_PARA}
CERT_CHAIN_FIND_BY_ISSUER_PARA = _CERT_CHAIN_FIND_BY_ISSUER_PARA;
{$EXTERNALSYM CERT_CHAIN_FIND_BY_ISSUER_PARA}
TCertChainFindByIssuerPara = CERT_CHAIN_FIND_BY_ISSUER_PARA;
PCertChainFindByIssuerPara = PCERT_CHAIN_FIND_BY_ISSUER_PARA;
// The following dwFindFlags can be set for CERT_CHAIN_FIND_BY_ISSUER
// If set, compares the public key in the end certificate with the crypto
// provider's public key. This comparison is the last check made on the
// build chain.
const
CERT_CHAIN_FIND_BY_ISSUER_COMPARE_KEY_FLAG = $0001;
{$EXTERNALSYM CERT_CHAIN_FIND_BY_ISSUER_COMPARE_KEY_FLAG}
// If not set, only checks the first simple chain for an issuer name match.
// When set, also checks second and subsequent simple chains.
CERT_CHAIN_FIND_BY_ISSUER_COMPLEX_CHAIN_FLAG = $0002;
{$EXTERNALSYM CERT_CHAIN_FIND_BY_ISSUER_COMPLEX_CHAIN_FLAG}
// If set, CertGetCertificateChain only searches the URL cache and
// doesn't hit the wire.
CERT_CHAIN_FIND_BY_ISSUER_CACHE_ONLY_URL_FLAG = $0004;
{$EXTERNALSYM CERT_CHAIN_FIND_BY_ISSUER_CACHE_ONLY_URL_FLAG}
// If set, CertGetCertificateChain only opens the Local Machine
// certificate stores instead of the Current User's.
CERT_CHAIN_FIND_BY_ISSUER_LOCAL_MACHINE_FLAG = $0008;
{$EXTERNALSYM CERT_CHAIN_FIND_BY_ISSUER_LOCAL_MACHINE_FLAG}
// If set, no check is made to see if the end certificate has a private
// key associated with it.
CERT_CHAIN_FIND_BY_ISSUER_NO_KEY_FLAG = $4000;
{$EXTERNALSYM CERT_CHAIN_FIND_BY_ISSUER_NO_KEY_FLAG}
// By default, the hCertStore passed to CertFindChainInStore, is passed
// as the additional store to CertGetCertificateChain. This flag can be
// set to improve performance by only searching the cached system stores
// (root, my, ca, trust) to find the issuer certificates. If not set, then,
// the hCertStore is always searched in addition to the cached system
// stores.
CERT_CHAIN_FIND_BY_ISSUER_CACHE_ONLY_FLAG = $8000;
{$EXTERNALSYM CERT_CHAIN_FIND_BY_ISSUER_CACHE_ONLY_FLAG}
//+=========================================================================
// Certificate Chain Policy Data Structures and APIs
//==========================================================================
type
PCERT_CHAIN_POLICY_PARA = ^CERT_CHAIN_POLICY_PARA;
{$EXTERNALSYM PCERT_CHAIN_POLICY_PARA}
_CERT_CHAIN_POLICY_PARA = record
cbSize: DWORD;
dwFlags: DWORD;
pvExtraPolicyPara: Pointer; // pszPolicyOID specific
end;
{$EXTERNALSYM _CERT_CHAIN_POLICY_PARA}
CERT_CHAIN_POLICY_PARA = _CERT_CHAIN_POLICY_PARA;
{$EXTERNALSYM CERT_CHAIN_POLICY_PARA}
TCertChainPolicyPara = CERT_CHAIN_POLICY_PARA;
PCertChainPolicyPara = PCERT_CHAIN_POLICY_PARA;
// If both lChainIndex and lElementIndex are set to -1, the dwError applies
// to the whole chain context. If only lElementIndex is set to -1, the
// dwError applies to the lChainIndex'ed chain. Otherwise, the dwError applies
// to the certificate element at
// pChainContext->rgpChain[lChainIndex]->rgpElement[lElementIndex].
PCERT_CHAIN_POLICY_STATUS = ^CERT_CHAIN_POLICY_STATUS;
{$EXTERNALSYM PCERT_CHAIN_POLICY_STATUS}
_CERT_CHAIN_POLICY_STATUS = record
cbSize: DWORD;
dwError: DWORD;
lChainIndex: LONG;
lElementIndex: LONG;
pvExtraPolicyStatus: Pointer; // pszPolicyOID specific
end;
{$EXTERNALSYM _CERT_CHAIN_POLICY_STATUS}
CERT_CHAIN_POLICY_STATUS = _CERT_CHAIN_POLICY_STATUS;
{$EXTERNALSYM CERT_CHAIN_POLICY_STATUS}
TCertChainPolicyStatus = CERT_CHAIN_POLICY_STATUS;
PCertChainPolicyStatus = PCERT_CHAIN_POLICY_STATUS;
// Common chain policy flags
const
CERT_CHAIN_POLICY_IGNORE_NOT_TIME_VALID_FLAG = $00000001;
{$EXTERNALSYM CERT_CHAIN_POLICY_IGNORE_NOT_TIME_VALID_FLAG}
CERT_CHAIN_POLICY_IGNORE_CTL_NOT_TIME_VALID_FLAG = $00000002;
{$EXTERNALSYM CERT_CHAIN_POLICY_IGNORE_CTL_NOT_TIME_VALID_FLAG}
CERT_CHAIN_POLICY_IGNORE_NOT_TIME_NESTED_FLAG = $00000004;
{$EXTERNALSYM CERT_CHAIN_POLICY_IGNORE_NOT_TIME_NESTED_FLAG}
CERT_CHAIN_POLICY_IGNORE_ALL_NOT_TIME_VALID_FLAGS = (
CERT_CHAIN_POLICY_IGNORE_NOT_TIME_VALID_FLAG or
CERT_CHAIN_POLICY_IGNORE_CTL_NOT_TIME_VALID_FLAG or
CERT_CHAIN_POLICY_IGNORE_NOT_TIME_NESTED_FLAG);
{$EXTERNALSYM CERT_CHAIN_POLICY_IGNORE_ALL_NOT_TIME_VALID_FLAGS}
CERT_CHAIN_POLICY_ALLOW_UNKNOWN_CA_FLAG = $00000010;
{$EXTERNALSYM CERT_CHAIN_POLICY_ALLOW_UNKNOWN_CA_FLAG}
CERT_CHAIN_POLICY_IGNORE_WRONG_USAGE_FLAG = $00000020;
{$EXTERNALSYM CERT_CHAIN_POLICY_IGNORE_WRONG_USAGE_FLAG}
CERT_CHAIN_POLICY_IGNORE_END_REV_UNKNOWN_FLAG = $00000100;
{$EXTERNALSYM CERT_CHAIN_POLICY_IGNORE_END_REV_UNKNOWN_FLAG}
CERT_CHAIN_POLICY_IGNORE_CTL_SIGNER_REV_UNKNOWN_FLAG = $00000200;
{$EXTERNALSYM CERT_CHAIN_POLICY_IGNORE_CTL_SIGNER_REV_UNKNOWN_FLAG}
CERT_CHAIN_POLICY_IGNORE_CA_REV_UNKNOWN_FLAG = $00000400;
{$EXTERNALSYM CERT_CHAIN_POLICY_IGNORE_CA_REV_UNKNOWN_FLAG}
CERT_CHAIN_POLICY_IGNORE_ROOT_REV_UNKNOWN_FLAG = $00000800;
{$EXTERNALSYM CERT_CHAIN_POLICY_IGNORE_ROOT_REV_UNKNOWN_FLAG}
CERT_CHAIN_POLICY_IGNORE_ALL_REV_UNKNOWN_FLAGS = (
CERT_CHAIN_POLICY_IGNORE_END_REV_UNKNOWN_FLAG or
CERT_CHAIN_POLICY_IGNORE_CTL_SIGNER_REV_UNKNOWN_FLAG or
CERT_CHAIN_POLICY_IGNORE_CA_REV_UNKNOWN_FLAG or
CERT_CHAIN_POLICY_IGNORE_ROOT_REV_UNKNOWN_FLAG);
{$EXTERNALSYM CERT_CHAIN_POLICY_IGNORE_ALL_REV_UNKNOWN_FLAGS}
CERT_CHAIN_POLICY_ALLOW_TESTROOT_FLAG = $00008000;
{$EXTERNALSYM CERT_CHAIN_POLICY_ALLOW_TESTROOT_FLAG}
CERT_CHAIN_POLICY_TRUST_TESTROOT_FLAG = $00004000;
{$EXTERNALSYM CERT_CHAIN_POLICY_TRUST_TESTROOT_FLAG}
//+-------------------------------------------------------------------------
// Verify that the certificate chain satisfies the specified policy
// requirements. If we were able to verify the chain policy, TRUE is returned
// and the dwError field of the pPolicyStatus is updated. A dwError of 0
// (ERROR_SUCCESS, S_OK) indicates the chain satisfies the specified policy.
//
// If dwError applies to the entire chain context, both lChainIndex and
// lElementIndex are set to -1. If dwError applies to a simple chain,
// lElementIndex is set to -1 and lChainIndex is set to the index of the
// first offending chain having the error. If dwError applies to a
// certificate element, lChainIndex and lElementIndex are updated to
// index the first offending certificate having the error, where, the
// the certificate element is at:
// pChainContext->rgpChain[lChainIndex]->rgpElement[lElementIndex].
//
// The dwFlags in pPolicyPara can be set to change the default policy checking
// behaviour. In addition, policy specific parameters can be passed in
// the pvExtraPolicyPara field of pPolicyPara.
//
// In addition to returning dwError, in pPolicyStatus, policy OID specific
// extra status may be returned via pvExtraPolicyStatus.
//--------------------------------------------------------------------------
function CertVerifyCertificateChainPolicy(pszPolicyOID: LPCSTR;
pChainContext: PCCERT_CHAIN_CONTEXT; pPolicyPara: PCERT_CHAIN_POLICY_PARA;
pPolicyStatus: PCERT_CHAIN_POLICY_STATUS): BOOL; stdcall;
{$EXTERNALSYM CertVerifyCertificateChainPolicy}
// Predefined OID Function Names
const
CRYPT_OID_VERIFY_CERTIFICATE_CHAIN_POLICY_FUNC = 'CertDllVerifyCertificateChainPolicy';
{$EXTERNALSYM CRYPT_OID_VERIFY_CERTIFICATE_CHAIN_POLICY_FUNC}
// CertDllVerifyCertificateChainPolicy has same function signature as
// CertVerifyCertificateChainPolicy.
//+-------------------------------------------------------------------------
// Predefined verify chain policies
//--------------------------------------------------------------------------
CERT_CHAIN_POLICY_BASE = LPCSTR(1);
{$EXTERNALSYM CERT_CHAIN_POLICY_BASE}
CERT_CHAIN_POLICY_AUTHENTICODE = LPCSTR(2);
{$EXTERNALSYM CERT_CHAIN_POLICY_AUTHENTICODE}
CERT_CHAIN_POLICY_AUTHENTICODE_TS = LPCSTR(3);
{$EXTERNALSYM CERT_CHAIN_POLICY_AUTHENTICODE_TS}
CERT_CHAIN_POLICY_SSL = LPCSTR(4);
{$EXTERNALSYM CERT_CHAIN_POLICY_SSL}
CERT_CHAIN_POLICY_BASIC_CONSTRAINTS = LPCSTR(5);
{$EXTERNALSYM CERT_CHAIN_POLICY_BASIC_CONSTRAINTS}
CERT_CHAIN_POLICY_NT_AUTH = LPCSTR(6);
{$EXTERNALSYM CERT_CHAIN_POLICY_NT_AUTH}
//+-------------------------------------------------------------------------
// CERT_CHAIN_POLICY_BASE
//
// Implements the base chain policy verification checks. dwFlags can
// be set in pPolicyPara to alter the default policy checking behaviour.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CERT_CHAIN_POLICY_AUTHENTICODE
//
// Implements the Authenticode chain policy verification checks.
//
// pvExtraPolicyPara may optionally be set to point to the following
// AUTHENTICODE_EXTRA_CERT_CHAIN_POLICY_PARA.
//
// pvExtraPolicyStatus may optionally be set to point to the following
// AUTHENTICODE_EXTRA_CERT_CHAIN_POLICY_STATUS.
//--------------------------------------------------------------------------
// dwRegPolicySettings are defined in wintrust.h
type
PAUTHENTICODE_EXTRA_CERT_CHAIN_POLICY_PARA = ^AUTHENTICODE_EXTRA_CERT_CHAIN_POLICY_PARA;
{$EXTERNALSYM PAUTHENTICODE_EXTRA_CERT_CHAIN_POLICY_PARA}
_AUTHENTICODE_EXTRA_CERT_CHAIN_POLICY_PARA = record
cbSize: DWORD;
dwRegPolicySettings: DWORD;
pSignerInfo: PCMSG_SIGNER_INFO; // optional
end;
{$EXTERNALSYM _AUTHENTICODE_EXTRA_CERT_CHAIN_POLICY_PARA}
AUTHENTICODE_EXTRA_CERT_CHAIN_POLICY_PARA = _AUTHENTICODE_EXTRA_CERT_CHAIN_POLICY_PARA;
{$EXTERNALSYM AUTHENTICODE_EXTRA_CERT_CHAIN_POLICY_PARA}
TAuthenticodeExtraCertChainPolicyPara = AUTHENTICODE_EXTRA_CERT_CHAIN_POLICY_PARA;
PAuthenticodeExtraCertChainPolicyPara = PAUTHENTICODE_EXTRA_CERT_CHAIN_POLICY_PARA;
PAUTHENTICODE_EXTRA_CERT_CHAIN_POLICY_STATUS = ^AUTHENTICODE_EXTRA_CERT_CHAIN_POLICY_STATUS;
{$EXTERNALSYM PAUTHENTICODE_EXTRA_CERT_CHAIN_POLICY_STATUS}
_AUTHENTICODE_EXTRA_CERT_CHAIN_POLICY_STATUS = record
cbSize: DWORD;
fCommercial: BOOL; // obtained from signer statement
end;
{$EXTERNALSYM _AUTHENTICODE_EXTRA_CERT_CHAIN_POLICY_STATUS}
AUTHENTICODE_EXTRA_CERT_CHAIN_POLICY_STATUS = _AUTHENTICODE_EXTRA_CERT_CHAIN_POLICY_STATUS;
{$EXTERNALSYM AUTHENTICODE_EXTRA_CERT_CHAIN_POLICY_STATUS}
TAuthenticodeExtraCertChainPolicyStatus = AUTHENTICODE_EXTRA_CERT_CHAIN_POLICY_STATUS;
PAuthenticodeExtraCertChainPolicyStatus = PAUTHENTICODE_EXTRA_CERT_CHAIN_POLICY_STATUS;
//+-------------------------------------------------------------------------
// CERT_CHAIN_POLICY_AUTHENTICODE_TS
//
// Implements the Authenticode Time Stamp chain policy verification checks.
//
// pvExtraPolicyPara may optionally be set to point to the following
// AUTHENTICODE_TS_EXTRA_CERT_CHAIN_POLICY_PARA.
//
// pvExtraPolicyStatus isn't used and must be set to NULL.
//--------------------------------------------------------------------------
// dwRegPolicySettings are defined in wintrust.h
PAUTHENTICODE_TS_EXTRA_CERT_CHAIN_POLICY_PARA = ^AUTHENTICODE_TS_EXTRA_CERT_CHAIN_POLICY_PARA;
{$EXTERNALSYM PAUTHENTICODE_TS_EXTRA_CERT_CHAIN_POLICY_PARA}
_AUTHENTICODE_TS_EXTRA_CERT_CHAIN_POLICY_PARA = record
cbSize: DWORD;
dwRegPolicySettings: DWORD;
fCommercial: BOOL;
end;
{$EXTERNALSYM _AUTHENTICODE_TS_EXTRA_CERT_CHAIN_POLICY_PARA}
AUTHENTICODE_TS_EXTRA_CERT_CHAIN_POLICY_PARA = _AUTHENTICODE_TS_EXTRA_CERT_CHAIN_POLICY_PARA;
{$EXTERNALSYM AUTHENTICODE_TS_EXTRA_CERT_CHAIN_POLICY_PARA}
TAuthenticodeTsExtraCertChainPolicyPara = AUTHENTICODE_TS_EXTRA_CERT_CHAIN_POLICY_PARA;
PAuthenticodeTsExtraCertChainPolicyPara = PAUTHENTICODE_TS_EXTRA_CERT_CHAIN_POLICY_PARA;
//+-------------------------------------------------------------------------
// CERT_CHAIN_POLICY_SSL
//
// Implements the SSL client/server chain policy verification checks.
//
// pvExtraPolicyPara may optionally be set to point to the following
// SSL_EXTRA_CERT_CHAIN_POLICY_PARA data structure
//--------------------------------------------------------------------------
// fdwChecks flags are defined in wininet.h
const
AUTHTYPE_CLIENT = 1;
{$EXTERNALSYM AUTHTYPE_CLIENT}
AUTHTYPE_SERVER = 2;
{$EXTERNALSYM AUTHTYPE_SERVER}
type
PHTTPSPolicyCallbackData = ^HTTPSPolicyCallbackData;
{$EXTERNALSYM PHTTPSPolicyCallbackData}
_HTTPSPolicyCallbackData = record
//union {
//cbStruct: DWORD; // sizeof(HTTPSPolicyCallbackData);
cbSize: DWORD; // sizeof(HTTPSPolicyCallbackData);
//};
dwAuthType: DWORD;
fdwChecks: DWORD;
pwszServerName: PWCHAR; // used to check against CN=xxxx
end;
{$EXTERNALSYM _HTTPSPolicyCallbackData}
HTTPSPolicyCallbackData = _HTTPSPolicyCallbackData;
{$EXTERNALSYM HTTPSPolicyCallbackData}
THttpsPolicyCallbackData = HTTPSPolicyCallbackData;
SSL_EXTRA_CERT_CHAIN_POLICY_PARA = HTTPSPolicyCallbackData;
{$EXTERNALSYM SSL_EXTRA_CERT_CHAIN_POLICY_PARA}
PSSL_EXTRA_CERT_CHAIN_POLICY_PARA = PHTTPSPolicyCallbackData;
{$EXTERNALSYM PSSL_EXTRA_CERT_CHAIN_POLICY_PARA}
TSSLExtraCertChainPolicyPara = SSL_EXTRA_CERT_CHAIN_POLICY_PARA;
PSSLExtraCertChainPolicyPara = PSSL_EXTRA_CERT_CHAIN_POLICY_PARA;
//+-------------------------------------------------------------------------
// CERT_CHAIN_POLICY_BASIC_CONSTRAINTS
//
// Implements the basic constraints chain policy.
//
// Iterates through all the certificates in the chain checking for either
// a szOID_BASIC_CONSTRAINTS or a szOID_BASIC_CONSTRAINTS2 extension. If
// neither extension is present, the certificate is assumed to have
// valid policy. Otherwise, for the first certificate element, checks if
// it matches the expected CA_FLAG or END_ENTITY_FLAG specified in
// pPolicyPara->dwFlags. If neither or both flags are set, then, the first
// element can be either a CA or END_ENTITY. All other elements must be
// a CA. If the PathLenConstraint is present in the extension, its
// checked.
//
// The first elements in the remaining simple chains (ie, the certificate
// used to sign the CTL) are checked to be an END_ENTITY.
//
// If this verification fails, dwError will be set to
// TRUST_E_BASIC_CONSTRAINTS.
//--------------------------------------------------------------------------
const
BASIC_CONSTRAINTS_CERT_CHAIN_POLICY_CA_FLAG = DWORD($80000000);
{$EXTERNALSYM BASIC_CONSTRAINTS_CERT_CHAIN_POLICY_CA_FLAG}
BASIC_CONSTRAINTS_CERT_CHAIN_POLICY_END_ENTITY_FLAG = $40000000;
{$EXTERNALSYM BASIC_CONSTRAINTS_CERT_CHAIN_POLICY_END_ENTITY_FLAG}
//+-------------------------------------------------------------------------
// CERT_CHAIN_POLICY_NT_AUTH
//
// Implements the NT Authentication chain policy.
//
// The NT Authentication chain policy consists of 3 distinct chain
// verifications in the following order:
// [1] CERT_CHAIN_POLICY_BASE - Implements the base chain policy
// verification checks. The LOWORD of dwFlags can be set in
// pPolicyPara to alter the default policy checking behaviour. See
// CERT_CHAIN_POLICY_BASE for more details.
//
// [2] CERT_CHAIN_POLICY_BASIC_CONSTRAINTS - Implements the basic
// constraints chain policy. The HIWORD of dwFlags can be set
// to specify if the first element must be either a CA or END_ENTITY.
// See CERT_CHAIN_POLICY_BASIC_CONSTRAINTS for more details.
//
// [3] Checks if the second element in the chain, the CA that issued
// the end certificate, is a trusted CA for NT
// Authentication. A CA is considered to be trusted if it exists in
// the "NTAuth" system registry store found in the
// CERT_SYSTEM_STORE_LOCAL_MACHINE_ENTERPRISE store location.
// If this verification fails, whereby the CA isn't trusted,
// dwError is set to CERT_E_UNTRUSTEDCA.
//--------------------------------------------------------------------------
//+-------------------------------------------------------------------------
// CERT_CHAIN_POLICY_MICROSOFT_ROOT
//
// Checks if the last element of the first simple chain contains a
// Microsoft root public key. If it doesn't contain a Microsoft root
// public key, dwError is set to CERT_E_UNTRUSTEDROOT.
//
// pPolicyPara is optional. However,
// MICROSOFT_ROOT_CERT_CHAIN_POLICY_ENABLE_TEST_ROOT_FLAG can be set in
// the dwFlags in pPolicyPara to also check for the Microsoft Test Roots.
//
// pvExtraPolicyPara and pvExtraPolicyStatus aren't used and must be set
// to NULL.
//--------------------------------------------------------------------------
const
MICROSOFT_ROOT_CERT_CHAIN_POLICY_ENABLE_TEST_ROOT_FLAG = $00010000;
{$EXTERNALSYM MICROSOFT_ROOT_CERT_CHAIN_POLICY_ENABLE_TEST_ROOT_FLAG}
//+-------------------------------------------------------------------------
// convert formatted string to binary
// If cchString is 0, then pszString is NULL terminated and
// cchString is obtained via strlen() + 1.
// dwFlags defines string format
// if pbBinary is NULL, *pcbBinary returns the size of required memory
// *pdwSkip returns the character count of skipped strings, optional
// *pdwFlags returns the actual format used in the conversion, optional
//--------------------------------------------------------------------------
function CryptStringToBinaryA(pszString: LPCSTR; cchString: DWORD;
dwFlags: DWORD; ppBinary: PBYTE; var ppcbBinary: DWORD;
ppdwSkip: PDWORD): BOOL; stdcall;
{$EXTERNALSYM CryptStringToBinaryA}
//+-------------------------------------------------------------------------
// convert formatted string to binary
// If cchString is 0, then pszString is NULL terminated and
// cchString is obtained via strlen() + 1.
// dwFlags defines string format
// if pbBinary is NULL, *pcbBinary returns the size of required memory
// *pdwSkip returns the character count of skipped strings, optional
// *pdwFlags returns the actual format used in the conversion, optional
//--------------------------------------------------------------------------
function CryptStringToBinaryW(pszString: LPCWSTR; cchString: DWORD;
dwFlags: DWORD; ppBinary: BYTE; var ppcbBinary: DWORD;
ppdwSkip: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptStringToBinaryW}
function CryptStringToBinary(pszString: LPCSTR; cchString: DWORD;
dwFlags: DWORD; ppBinary: BYTE; var ppcbBinary: DWORD;
ppdwSkip: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptStringToBinary}
//+-------------------------------------------------------------------------
// convert binary to formatted string
// dwFlags defines string format
// if pszString is NULL, *pcchString returns size in characters
// including null-terminator
//--------------------------------------------------------------------------
function CryptBinaryToStringA(const pBinary: PBYTE; cbBinary: DWORD;
dwFlags: DWORD; pszString: LPSTR; var pchString: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptBinaryToStringA}
//+-------------------------------------------------------------------------
// convert binary to formatted string
// dwFlags defines string format
// if pszString is NULL, *pcchString returns size in characters
// including null-terminator
//--------------------------------------------------------------------------
function CryptBinaryToStringW(const pBinary: PBYTE; cbBinary: DWORD;
dwFlags: DWORD; pszString: LPWSTR; var pchString: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptBinaryToStringW}
function CryptBinaryToString(const pBinary: PBYTE; cbBinary: DWORD;
dwFlags: DWORD; pszString: LPSTR; var pchString: DWORD): BOOL; stdcall;
{$EXTERNALSYM CryptBinaryToString}
// dwFlags has the following defines
const
CRYPT_STRING_BASE64HEADER = $00000000;
CRYPT_STRING_BASE64 = $00000001;
CRYPT_STRING_BINARY = $00000002;
CRYPT_STRING_BASE64REQUESTHEADER = $00000003;
CRYPT_STRING_HEX = $00000004;
CRYPT_STRING_HEXASCII = $00000005;
CRYPT_STRING_BASE64_ANY = $00000006;
CRYPT_STRING_ANY = $00000007;
CRYPT_STRING_HEX_ANY = $00000008;
CRYPT_STRING_BASE64X509CRLHEADER = $00000009;
CRYPT_STRING_HEXADDR = $0000000a;
CRYPT_STRING_HEXASCIIADDR = $0000000b;
CRYPT_STRING_NOCR = DWORD($80000000);
// CryptBinaryToString uses the following flags
// CRYPT_STRING_BASE64HEADER - base64 format with certificate begin
// and end headers
// CRYPT_STRING_BASE64 - only base64 without headers
// CRYPT_STRING_BINARY - pure binary copy
// CRYPT_STRING_BASE64REQUESTHEADER - base64 format with request begin
// and end headers
// CRYPT_STRING_BASE64X509CRLHEADER - base64 format with x509 crl begin
// and end headers
// CRYPT_STRING_HEX - only hex format
// CRYPT_STRING_HEXASCII - hex format with ascii char display
// CRYPT_STRING_HEXADDR - hex format with address display
// CRYPT_STRING_HEXASCIIADDR - hex format with ascii char and address display
//
// CryptBinaryToString accepts CRYPT_STRING_NOCR or'd into one of the above.
// When set, line breaks contain only LF, instead of CR-LF pairs.
// CryptStringToBinary uses the following flags
// CRYPT_STRING_BASE64_ANY tries the following, in order:
// CRYPT_STRING_BASE64HEADER
// CRYPT_STRING_BASE64
// CRYPT_STRING_ANY tries the following, in order:
// CRYPT_STRING_BASE64_ANY
// CRYPT_STRING_BINARY -- should always succeed
// CRYPT_STRING_HEX_ANY tries the following, in order:
// CRYPT_STRING_HEXADDR
// CRYPT_STRING_HEXASCIIADDR
// CRYPT_STRING_HEXASCII
// CRYPT_STRING_HEX
{$ENDIF JWA_IMPLEMENTATIONSECTION}
{$IFNDEF JWA_OMIT_SECTIONS}
implementation
//uses ...
{$ENDIF JWA_OMIT_SECTIONS}
{$IFNDEF JWA_INTERFACESECTION}
{$IFNDEF JWA_INCLUDEMODE}
const
crypt32 = 'crypt32.dll';
cryptnet = 'cryptnet.dll';
advapi32 = 'advapi32.dll';
softpub = 'softpub.dll';
{$IFDEF UNICODE}
AWSuffix = 'W';
{$ELSE}
AWSuffix = 'A';
{$ENDIF UNICODE}
{$ENDIF JWA_INCLUDEMODE}
function GET_ALG_CLASS(x: DWORD): DWORD;
begin
Result := (x and (7 shl 13));
end;
function GET_ALG_TYPE(x: DWORD): DWORD;
begin
Result := (x and (15 shl 9));
end;
function GET_ALG_SID(x: DWORD): DWORD;
begin
Result := x and 511;
end;
function RCRYPT_SUCCEEDED(rt: BOOL): BOOL;
begin
Result := (rt = CRYPT_SUCCEED);
end;
function RCRYPT_FAILED(rt: BOOL): BOOL;
begin
Result := (rt = CRYPT_FAILED)
end;
function IS_CERT_RDN_CHAR_STRING(X: DWORD): Boolean;
begin
Result := (X and CERT_RDN_TYPE_MASK) >= CERT_RDN_NUMERIC_STRING;
end;
function GET_CERT_ENCODING_TYPE(X: DWORD): DWORD;
begin
Result := X and CERT_ENCODING_TYPE_MASK;
end;
function GET_CMSG_ENCODING_TYPE(X: DWORD): DWORD;
begin
Result := X and CMSG_ENCODING_TYPE_MASK;
end;
function GET_CERT_UNICODE_RDN_ERR_INDEX(X: DWORD): DWORD;
begin
Result := (X shr CERT_UNICODE_RDN_ERR_INDEX_SHIFT) and CERT_UNICODE_RDN_ERR_INDEX_MASK;
end;
function GET_CERT_UNICODE_ATTR_ERR_INDEX(X: DWORD): DWORD;
begin
Result := (X shr CERT_UNICODE_ATTR_ERR_INDEX_SHIFT) and CERT_UNICODE_ATTR_ERR_INDEX_MASK;
end;
function GET_CERT_UNICODE_VALUE_ERR_INDEX(X: DWORD): DWORD;
begin
Result := X and CERT_UNICODE_VALUE_ERR_INDEX_MASK;
end;
function GET_CERT_ALT_NAME_ENTRY_ERR_INDEX(X: DWORD): DWORD;
begin
Result := (X shr CERT_ALT_NAME_ENTRY_ERR_INDEX_SHIFT) and CERT_ALT_NAME_ENTRY_ERR_INDEX_MASK;
end;
function GET_CERT_ALT_NAME_VALUE_ERR_INDEX(X: DWORD): DWORD;
begin
Result := X and CERT_ALT_NAME_VALUE_ERR_INDEX_MASK;
end;
function IS_CRL_DIST_POINT_ERR_CRL_ISSUER(X: DWORD): Boolean;
begin
Result := (X and CRL_DIST_POINT_ERR_CRL_ISSUER_BIT) <> 0;
end;
function GET_CRL_DIST_POINT_ERR_INDEX(X: DWORD): DWORD;
begin
Result := ((X shr CRL_DIST_POINT_ERR_INDEX_SHIFT) and CRL_DIST_POINT_ERR_INDEX_MASK);
end;
function IS_CERT_HASH_PROP_ID(X: DWORD): Boolean;
begin
Result := (CERT_SHA1_HASH_PROP_ID = X) or (CERT_MD5_HASH_PROP_ID = X) or
(CERT_SIGNATURE_HASH_PROP_ID = X);
end;
{$IFDEF DYNAMIC_LINK}
var
_CryptAcquireContextA: Pointer;
function CryptAcquireContextA;
begin
GetProcedureAddress(_CryptAcquireContextA, advapi32, 'CryptAcquireContextA');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptAcquireContextA]
end;
end;
var
_CryptAcquireContextW: Pointer;
function CryptAcquireContextW;
begin
GetProcedureAddress(_CryptAcquireContextW, advapi32, 'CryptAcquireContextW');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptAcquireContextW]
end;
end;
var
_CryptAcquireContext: Pointer;
function CryptAcquireContext;
begin
GetProcedureAddress(_CryptAcquireContext, advapi32, 'CryptAcquireContext' + AWSuffix);
asm
MOV ESP, EBP
POP EBP
JMP [_CryptAcquireContext]
end;
end;
var
_CryptReleaseContext: Pointer;
function CryptReleaseContext;
begin
GetProcedureAddress(_CryptReleaseContext, advapi32, 'CryptReleaseContext');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptReleaseContext]
end;
end;
var
_CryptGenKey: Pointer;
function CryptGenKey;
begin
GetProcedureAddress(_CryptGenKey, advapi32, 'CryptGenKey');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptGenKey]
end;
end;
var
_CryptDeriveKey: Pointer;
function CryptDeriveKey;
begin
GetProcedureAddress(_CryptDeriveKey, advapi32, 'CryptDeriveKey');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptDeriveKey]
end;
end;
var
_CryptDestroyKey: Pointer;
function CryptDestroyKey;
begin
GetProcedureAddress(_CryptDestroyKey, advapi32, 'CryptDestroyKey');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptDestroyKey]
end;
end;
var
_CryptSetKeyParam: Pointer;
function CryptSetKeyParam;
begin
GetProcedureAddress(_CryptSetKeyParam, advapi32, 'CryptSetKeyParam');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptSetKeyParam]
end;
end;
var
_CryptGetKeyParam: Pointer;
function CryptGetKeyParam;
begin
GetProcedureAddress(_CryptGetKeyParam, advapi32, 'CryptGetKeyParam');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptGetKeyParam]
end;
end;
var
_CryptSetHashParam: Pointer;
function CryptSetHashParam;
begin
GetProcedureAddress(_CryptSetHashParam, advapi32, 'CryptSetHashParam');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptSetHashParam]
end;
end;
var
_CryptGetHashParam: Pointer;
function CryptGetHashParam;
begin
GetProcedureAddress(_CryptGetHashParam, advapi32, 'CryptGetHashParam');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptGetHashParam]
end;
end;
var
_CryptSetProvParam: Pointer;
function CryptSetProvParam;
begin
GetProcedureAddress(_CryptSetProvParam, advapi32, 'CryptSetProvParam');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptSetProvParam]
end;
end;
var
_CryptGetProvParam: Pointer;
function CryptGetProvParam;
begin
GetProcedureAddress(_CryptGetProvParam, advapi32, 'CryptGetProvParam');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptGetProvParam]
end;
end;
var
_CryptGenRandom: Pointer;
function CryptGenRandom;
begin
GetProcedureAddress(_CryptGenRandom, advapi32, 'CryptGenRandom');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptGenRandom]
end;
end;
var
_CryptGetUserKey: Pointer;
function CryptGetUserKey;
begin
GetProcedureAddress(_CryptGetUserKey, advapi32, 'CryptGetUserKey');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptGetUserKey]
end;
end;
var
_CryptExportKey: Pointer;
function CryptExportKey;
begin
GetProcedureAddress(_CryptExportKey, advapi32, 'CryptExportKey');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptExportKey]
end;
end;
var
_CryptImportKey: Pointer;
function CryptImportKey;
begin
GetProcedureAddress(_CryptImportKey, advapi32, 'CryptImportKey');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptImportKey]
end;
end;
var
_CryptEncrypt: Pointer;
function CryptEncrypt;
begin
GetProcedureAddress(_CryptEncrypt, advapi32, 'CryptEncrypt');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptEncrypt]
end;
end;
var
_CryptDecrypt: Pointer;
function CryptDecrypt;
begin
GetProcedureAddress(_CryptDecrypt, advapi32, 'CryptDecrypt');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptDecrypt]
end;
end;
var
_CryptCreateHash: Pointer;
function CryptCreateHash;
begin
GetProcedureAddress(_CryptCreateHash, advapi32, 'CryptCreateHash');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptCreateHash]
end;
end;
var
_CryptHashData: Pointer;
function CryptHashData;
begin
GetProcedureAddress(_CryptHashData, advapi32, 'CryptHashData');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptHashData]
end;
end;
var
_CryptHashSessionKey: Pointer;
function CryptHashSessionKey;
begin
GetProcedureAddress(_CryptHashSessionKey, advapi32, 'CryptHashSessionKey');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptHashSessionKey]
end;
end;
var
_CryptDestroyHash: Pointer;
function CryptDestroyHash;
begin
GetProcedureAddress(_CryptDestroyHash, advapi32, 'CryptDestroyHash');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptDestroyHash]
end;
end;
var
_CryptSignHashA: Pointer;
function CryptSignHashA;
begin
GetProcedureAddress(_CryptSignHashA, advapi32, 'CryptSignHashA');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptSignHashA]
end;
end;
var
_CryptSignHashW: Pointer;
function CryptSignHashW;
begin
GetProcedureAddress(_CryptSignHashW, advapi32, 'CryptSignHashW');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptSignHashW]
end;
end;
var
_CryptSignHash: Pointer;
function CryptSignHash;
begin
GetProcedureAddress(_CryptSignHash, advapi32, 'CryptSignHash' + AWSuffix);
asm
MOV ESP, EBP
POP EBP
JMP [_CryptSignHash]
end;
end;
var
_CryptVerifySignatureA: Pointer;
function CryptVerifySignatureA;
begin
GetProcedureAddress(_CryptVerifySignatureA, advapi32, 'CryptVerifySignatureA');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptVerifySignatureA]
end;
end;
var
_CryptVerifySignatureW: Pointer;
function CryptVerifySignatureW;
begin
GetProcedureAddress(_CryptVerifySignatureW, advapi32, 'CryptVerifySignatureW');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptVerifySignatureW]
end;
end;
var
_CryptVerifySignature: Pointer;
function CryptVerifySignature;
begin
GetProcedureAddress(_CryptVerifySignature, advapi32, 'CryptVerifySignature' + AWSuffix);
asm
MOV ESP, EBP
POP EBP
JMP [_CryptVerifySignature]
end;
end;
var
_CryptSetProviderA: Pointer;
function CryptSetProviderA;
begin
GetProcedureAddress(_CryptSetProviderA, advapi32, 'CryptSetProviderA');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptSetProviderA]
end;
end;
var
_CryptSetProviderW: Pointer;
function CryptSetProviderW;
begin
GetProcedureAddress(_CryptSetProviderW, advapi32, 'CryptSetProviderW');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptSetProviderW]
end;
end;
var
_CryptSetProvider: Pointer;
function CryptSetProvider;
begin
GetProcedureAddress(_CryptSetProvider, advapi32, 'CryptSetProvider' + AWSuffix);
asm
MOV ESP, EBP
POP EBP
JMP [_CryptSetProvider]
end;
end;
var
_CryptSetProviderExA: Pointer;
function CryptSetProviderExA;
begin
GetProcedureAddress(_CryptSetProviderExA, advapi32, 'CryptSetProviderExA');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptSetProviderExA]
end;
end;
var
_CryptSetProviderExW: Pointer;
function CryptSetProviderExW;
begin
GetProcedureAddress(_CryptSetProviderExW, advapi32, 'CryptSetProviderExW');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptSetProviderExW]
end;
end;
var
_CryptSetProviderEx: Pointer;
function CryptSetProviderEx;
begin
GetProcedureAddress(_CryptSetProviderEx, advapi32, 'CryptSetProviderEx' + AWSuffix);
asm
MOV ESP, EBP
POP EBP
JMP [_CryptSetProviderEx]
end;
end;
var
_CryptGetDefaultProviderA: Pointer;
function CryptGetDefaultProviderA;
begin
GetProcedureAddress(_CryptGetDefaultProviderA, advapi32, 'CryptGetDefaultProviderA');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptGetDefaultProviderA]
end;
end;
var
_CryptGetDefaultProviderW: Pointer;
function CryptGetDefaultProviderW;
begin
GetProcedureAddress(_CryptGetDefaultProviderW, advapi32, 'CryptGetDefaultProviderW');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptGetDefaultProviderW]
end;
end;
var
_CryptGetDefaultProvider: Pointer;
function CryptGetDefaultProvider;
begin
GetProcedureAddress(_CryptGetDefaultProvider, advapi32, 'CryptGetDefaultProvider' + AWSuffix);
asm
MOV ESP, EBP
POP EBP
JMP [_CryptGetDefaultProvider]
end;
end;
var
_CryptEnumProviderTypesA: Pointer;
function CryptEnumProviderTypesA;
begin
GetProcedureAddress(_CryptEnumProviderTypesA, advapi32, 'CryptEnumProviderTypesA');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptEnumProviderTypesA]
end;
end;
var
_CryptEnumProviderTypesW: Pointer;
function CryptEnumProviderTypesW;
begin
GetProcedureAddress(_CryptEnumProviderTypesW, advapi32, 'CryptEnumProviderTypesW');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptEnumProviderTypesW]
end;
end;
var
_CryptEnumProviderTypes: Pointer;
function CryptEnumProviderTypes;
begin
GetProcedureAddress(_CryptEnumProviderTypes, advapi32, 'CryptEnumProviderTypes' + AWSuffix);
asm
MOV ESP, EBP
POP EBP
JMP [_CryptEnumProviderTypes]
end;
end;
var
_CryptEnumProvidersA: Pointer;
function CryptEnumProvidersA;
begin
GetProcedureAddress(_CryptEnumProvidersA, advapi32, 'CryptEnumProvidersA');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptEnumProvidersA]
end;
end;
var
_CryptEnumProvidersW: Pointer;
function CryptEnumProvidersW;
begin
GetProcedureAddress(_CryptEnumProvidersW, advapi32, 'CryptEnumProvidersW');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptEnumProvidersW]
end;
end;
var
_CryptEnumProviders: Pointer;
function CryptEnumProviders;
begin
GetProcedureAddress(_CryptEnumProviders, advapi32, 'CryptEnumProviders' + AWSuffix);
asm
MOV ESP, EBP
POP EBP
JMP [_CryptEnumProviders]
end;
end;
var
_CryptContextAddRef: Pointer;
function CryptContextAddRef;
begin
GetProcedureAddress(_CryptContextAddRef, advapi32, 'CryptContextAddRef');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptContextAddRef]
end;
end;
var
_CryptDuplicateKey: Pointer;
function CryptDuplicateKey;
begin
GetProcedureAddress(_CryptDuplicateKey, advapi32, 'CryptDuplicateKey');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptDuplicateKey]
end;
end;
var
_CryptDuplicateHash: Pointer;
function CryptDuplicateHash;
begin
GetProcedureAddress(_CryptDuplicateHash, advapi32, 'CryptDuplicateHash');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptDuplicateHash]
end;
end;
var
_CryptFormatObject: Pointer;
function CryptFormatObject;
begin
GetProcedureAddress(_CryptFormatObject, crypt32, 'CryptFormatObject');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptFormatObject]
end;
end;
var
_CryptEncodeObjectEx: Pointer;
function CryptEncodeObjectEx;
begin
GetProcedureAddress(_CryptEncodeObjectEx, crypt32, 'CryptEncodeObjectEx');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptEncodeObjectEx]
end;
end;
var
_CryptEncodeObject: Pointer;
function CryptEncodeObject;
begin
GetProcedureAddress(_CryptEncodeObject, crypt32, 'CryptEncodeObject');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptEncodeObject]
end;
end;
var
_CryptDecodeObjectEx: Pointer;
function CryptDecodeObjectEx;
begin
GetProcedureAddress(_CryptDecodeObjectEx, crypt32, 'CryptDecodeObjectEx');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptDecodeObjectEx]
end;
end;
var
_CryptDecodeObject: Pointer;
function CryptDecodeObject;
begin
GetProcedureAddress(_CryptDecodeObject, crypt32, 'CryptDecodeObject');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptDecodeObject]
end;
end;
var
_CryptInstallOIDFunctionAddress: Pointer;
function CryptInstallOIDFunctionAddress;
begin
GetProcedureAddress(_CryptInstallOIDFunctionAddress, crypt32, 'CryptInstallOIDFunctionAddress');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptInstallOIDFunctionAddress]
end;
end;
var
_CryptInitOIDFunctionSet: Pointer;
function CryptInitOIDFunctionSet;
begin
GetProcedureAddress(_CryptInitOIDFunctionSet, crypt32, 'CryptInitOIDFunctionSet');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptInitOIDFunctionSet]
end;
end;
var
_CryptGetOIDFunctionAddress: Pointer;
function CryptGetOIDFunctionAddress;
begin
GetProcedureAddress(_CryptGetOIDFunctionAddress, crypt32, 'CryptGetOIDFunctionAddress');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptGetOIDFunctionAddress]
end;
end;
var
_CryptGetDefaultOIDDllList: Pointer;
function CryptGetDefaultOIDDllList;
begin
GetProcedureAddress(_CryptGetDefaultOIDDllList, crypt32, 'CryptGetDefaultOIDDllList');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptGetDefaultOIDDllList]
end;
end;
var
_CryptGetDefaultOIDFunctionAddr: Pointer;
function CryptGetDefaultOIDFunctionAddress;
begin
GetProcedureAddress(_CryptGetDefaultOIDFunctionAddr, crypt32, 'CryptGetDefaultOIDFunctionAddress');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptGetDefaultOIDFunctionAddr]
end;
end;
var
_CryptFreeOIDFunctionAddress: Pointer;
function CryptFreeOIDFunctionAddress;
begin
GetProcedureAddress(_CryptFreeOIDFunctionAddress, crypt32, 'CryptFreeOIDFunctionAddress');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptFreeOIDFunctionAddress]
end;
end;
var
_CryptRegisterOIDFunction: Pointer;
function CryptRegisterOIDFunction;
begin
GetProcedureAddress(_CryptRegisterOIDFunction, crypt32, 'CryptRegisterOIDFunction');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptRegisterOIDFunction]
end;
end;
var
_CryptUnregisterOIDFunction: Pointer;
function CryptUnregisterOIDFunction;
begin
GetProcedureAddress(_CryptUnregisterOIDFunction, crypt32, 'CryptUnregisterOIDFunction');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptUnregisterOIDFunction]
end;
end;
var
_CryptRegisterDefaultOIDFunction: Pointer;
function CryptRegisterDefaultOIDFunction;
begin
GetProcedureAddress(_CryptRegisterDefaultOIDFunction, crypt32, 'CryptRegisterDefaultOIDFunction');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptRegisterDefaultOIDFunction]
end;
end;
var
_CryptUnregisterDefaultOIDFunc: Pointer;
function CryptUnregisterDefaultOIDFunction;
begin
GetProcedureAddress(_CryptUnregisterDefaultOIDFunc, crypt32, 'CryptUnregisterDefaultOIDFunction');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptUnregisterDefaultOIDFunc]
end;
end;
var
_CryptSetOIDFunctionValue: Pointer;
function CryptSetOIDFunctionValue;
begin
GetProcedureAddress(_CryptSetOIDFunctionValue, crypt32, 'CryptSetOIDFunctionValue');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptSetOIDFunctionValue]
end;
end;
var
_CryptGetOIDFunctionValue: Pointer;
function CryptGetOIDFunctionValue;
begin
GetProcedureAddress(_CryptGetOIDFunctionValue, crypt32, 'CryptGetOIDFunctionValue');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptGetOIDFunctionValue]
end;
end;
var
_CryptEnumOIDFunction: Pointer;
function CryptEnumOIDFunction;
begin
GetProcedureAddress(_CryptEnumOIDFunction, crypt32, 'CryptEnumOIDFunction');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptEnumOIDFunction]
end;
end;
var
_CryptFindOIDInfo: Pointer;
function CryptFindOIDInfo;
begin
GetProcedureAddress(_CryptFindOIDInfo, crypt32, 'CryptFindOIDInfo');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptFindOIDInfo]
end;
end;
var
_CryptRegisterOIDInfo: Pointer;
function CryptRegisterOIDInfo;
begin
GetProcedureAddress(_CryptRegisterOIDInfo, crypt32, 'CryptRegisterOIDInfo');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptRegisterOIDInfo]
end;
end;
var
_CryptUnregisterOIDInfo: Pointer;
function CryptUnregisterOIDInfo;
begin
GetProcedureAddress(_CryptUnregisterOIDInfo, crypt32, 'CryptUnregisterOIDInfo');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptUnregisterOIDInfo]
end;
end;
var
_CryptEnumOIDInfo: Pointer;
function CryptEnumOIDInfo;
begin
GetProcedureAddress(_CryptEnumOIDInfo, crypt32, 'CryptEnumOIDInfo');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptEnumOIDInfo]
end;
end;
var
_CryptFindLocalizedName: Pointer;
function CryptFindLocalizedName;
begin
GetProcedureAddress(_CryptFindLocalizedName, crypt32, 'CryptFindLocalizedName');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptFindLocalizedName]
end;
end;
var
_CryptMsgOpenToEncode: Pointer;
function CryptMsgOpenToEncode;
begin
GetProcedureAddress(_CryptMsgOpenToEncode, crypt32, 'CryptMsgOpenToEncode');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptMsgOpenToEncode]
end;
end;
var
_CryptMsgCalculateEncodedLength: Pointer;
function CryptMsgCalculateEncodedLength;
begin
GetProcedureAddress(_CryptMsgCalculateEncodedLength, crypt32, 'CryptMsgCalculateEncodedLength');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptMsgCalculateEncodedLength]
end;
end;
var
_CryptMsgOpenToDecode: Pointer;
function CryptMsgOpenToDecode;
begin
GetProcedureAddress(_CryptMsgOpenToDecode, crypt32, 'CryptMsgOpenToDecode');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptMsgOpenToDecode]
end;
end;
var
_CryptMsgDuplicate: Pointer;
function CryptMsgDuplicate;
begin
GetProcedureAddress(_CryptMsgDuplicate, crypt32, 'CryptMsgDuplicate');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptMsgDuplicate]
end;
end;
var
_CryptMsgClose: Pointer;
function CryptMsgClose;
begin
GetProcedureAddress(_CryptMsgClose, crypt32, 'CryptMsgClose');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptMsgClose]
end;
end;
var
_CryptMsgUpdate: Pointer;
function CryptMsgUpdate;
begin
GetProcedureAddress(_CryptMsgUpdate, crypt32, 'CryptMsgUpdate');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptMsgUpdate]
end;
end;
var
_CryptMsgGetParam: Pointer;
function CryptMsgGetParam;
begin
GetProcedureAddress(_CryptMsgGetParam, crypt32, 'CryptMsgGetParam');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptMsgGetParam]
end;
end;
var
_CryptMsgControl: Pointer;
function CryptMsgControl;
begin
GetProcedureAddress(_CryptMsgControl, crypt32, 'CryptMsgControl');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptMsgControl]
end;
end;
var
_CryptMsgVerifyCountersigEnc: Pointer;
function CryptMsgVerifyCountersignatureEncoded;
begin
GetProcedureAddress(_CryptMsgVerifyCountersigEnc, crypt32, 'CryptMsgVerifyCountersignatureEncoded');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptMsgVerifyCountersigEnc]
end;
end;
var
_CryptMsgVerifyCountersigEncEx: Pointer;
function CryptMsgVerifyCountersignatureEncodedEx;
begin
GetProcedureAddress(_CryptMsgVerifyCountersigEncEx, crypt32, 'CryptMsgVerifyCountersignatureEncodedEx');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptMsgVerifyCountersigEncEx]
end;
end;
var
_CryptMsgCountersign: Pointer;
function CryptMsgCountersign;
begin
GetProcedureAddress(_CryptMsgCountersign, crypt32, 'CryptMsgCountersign');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptMsgCountersign]
end;
end;
var
_CryptMsgCountersignEncoded: Pointer;
function CryptMsgCountersignEncoded;
begin
GetProcedureAddress(_CryptMsgCountersignEncoded, crypt32, 'CryptMsgCountersignEncoded');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptMsgCountersignEncoded]
end;
end;
var
_CertOpenStore: Pointer;
function CertOpenStore;
begin
GetProcedureAddress(_CertOpenStore, crypt32, 'CertOpenStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertOpenStore]
end;
end;
var
_CertDuplicateStore: Pointer;
function CertDuplicateStore;
begin
GetProcedureAddress(_CertDuplicateStore, crypt32, 'CertDuplicateStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertDuplicateStore]
end;
end;
var
_CertSaveStore: Pointer;
function CertSaveStore;
begin
GetProcedureAddress(_CertSaveStore, crypt32, 'CertSaveStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertSaveStore]
end;
end;
var
_CertCloseStore: Pointer;
function CertCloseStore;
begin
GetProcedureAddress(_CertCloseStore, crypt32, 'CertCloseStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertCloseStore]
end;
end;
var
_CertGetSubjectCertFromStore: Pointer;
function CertGetSubjectCertificateFromStore;
begin
GetProcedureAddress(_CertGetSubjectCertFromStore, crypt32, 'CertGetSubjectCertificateFromStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertGetSubjectCertFromStore]
end;
end;
var
_CertEnumCertificatesInStore: Pointer;
function CertEnumCertificatesInStore;
begin
GetProcedureAddress(_CertEnumCertificatesInStore, crypt32, 'CertEnumCertificatesInStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertEnumCertificatesInStore]
end;
end;
var
_CertFindCertificateInStore: Pointer;
function CertFindCertificateInStore;
begin
GetProcedureAddress(_CertFindCertificateInStore, crypt32, 'CertFindCertificateInStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertFindCertificateInStore]
end;
end;
var
_CertGetIssuerCertFromStore: Pointer;
function CertGetIssuerCertificateFromStore;
begin
GetProcedureAddress(_CertGetIssuerCertFromStore, crypt32, 'CertGetIssuerCertificateFromStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertGetIssuerCertFromStore]
end;
end;
var
_CertVerifySubjectCertContext: Pointer;
function CertVerifySubjectCertificateContext;
begin
GetProcedureAddress(_CertVerifySubjectCertContext, crypt32, 'CertVerifySubjectCertificateContext');
asm
MOV ESP, EBP
POP EBP
JMP [_CertVerifySubjectCertContext]
end;
end;
var
_CertDuplicateCertificateContext: Pointer;
function CertDuplicateCertificateContext;
begin
GetProcedureAddress(_CertDuplicateCertificateContext, crypt32, 'CertDuplicateCertificateContext');
asm
MOV ESP, EBP
POP EBP
JMP [_CertDuplicateCertificateContext]
end;
end;
var
_CertCreateCertificateContext: Pointer;
function CertCreateCertificateContext;
begin
GetProcedureAddress(_CertCreateCertificateContext, crypt32, 'CertCreateCertificateContext');
asm
MOV ESP, EBP
POP EBP
JMP [_CertCreateCertificateContext]
end;
end;
var
_CertFreeCertificateContext: Pointer;
function CertFreeCertificateContext;
begin
GetProcedureAddress(_CertFreeCertificateContext, crypt32, 'CertFreeCertificateContext');
asm
MOV ESP, EBP
POP EBP
JMP [_CertFreeCertificateContext]
end;
end;
var
_CertSetCertContextProperty: Pointer;
function CertSetCertificateContextProperty;
begin
GetProcedureAddress(_CertSetCertContextProperty, crypt32, 'CertSetCertificateContextProperty');
asm
MOV ESP, EBP
POP EBP
JMP [_CertSetCertContextProperty]
end;
end;
var
_CertGetCertContextProperty: Pointer;
function CertGetCertificateContextProperty;
begin
GetProcedureAddress(_CertGetCertContextProperty, crypt32, 'CertGetCertificateContextProperty');
asm
MOV ESP, EBP
POP EBP
JMP [_CertGetCertContextProperty]
end;
end;
var
_CertEnumCertContextProperties: Pointer;
function CertEnumCertificateContextProperties;
begin
GetProcedureAddress(_CertEnumCertContextProperties, crypt32, 'CertEnumCertificateContextProperties');
asm
MOV ESP, EBP
POP EBP
JMP [_CertEnumCertContextProperties]
end;
end;
var
_CertGetCRLFromStore: Pointer;
function CertGetCRLFromStore;
begin
GetProcedureAddress(_CertGetCRLFromStore, crypt32, 'CertGetCRLFromStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertGetCRLFromStore]
end;
end;
var
_CertEnumCRLsInStore: Pointer;
function CertEnumCRLsInStore;
begin
GetProcedureAddress(_CertEnumCRLsInStore, crypt32, 'CertEnumCRLsInStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertEnumCRLsInStore]
end;
end;
var
_CertFindCRLInStore: Pointer;
function CertFindCRLInStore;
begin
GetProcedureAddress(_CertFindCRLInStore, crypt32, 'CertFindCRLInStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertFindCRLInStore]
end;
end;
var
_CertDuplicateCRLContext: Pointer;
function CertDuplicateCRLContext;
begin
GetProcedureAddress(_CertDuplicateCRLContext, crypt32, 'CertDuplicateCRLContext');
asm
MOV ESP, EBP
POP EBP
JMP [_CertDuplicateCRLContext]
end;
end;
var
_CertCreateCRLContext: Pointer;
function CertCreateCRLContext;
begin
GetProcedureAddress(_CertCreateCRLContext, crypt32, 'CertCreateCRLContext');
asm
MOV ESP, EBP
POP EBP
JMP [_CertCreateCRLContext]
end;
end;
var
_CertFreeCRLContext: Pointer;
function CertFreeCRLContext;
begin
GetProcedureAddress(_CertFreeCRLContext, crypt32, 'CertFreeCRLContext');
asm
MOV ESP, EBP
POP EBP
JMP [_CertFreeCRLContext]
end;
end;
var
_CertSetCRLContextProperty: Pointer;
function CertSetCRLContextProperty;
begin
GetProcedureAddress(_CertSetCRLContextProperty, crypt32, 'CertSetCRLContextProperty');
asm
MOV ESP, EBP
POP EBP
JMP [_CertSetCRLContextProperty]
end;
end;
var
_CertGetCRLContextProperty: Pointer;
function CertGetCRLContextProperty;
begin
GetProcedureAddress(_CertGetCRLContextProperty, crypt32, 'CertGetCRLContextProperty');
asm
MOV ESP, EBP
POP EBP
JMP [_CertGetCRLContextProperty]
end;
end;
var
_CertEnumCRLContextProperties: Pointer;
function CertEnumCRLContextProperties;
begin
GetProcedureAddress(_CertEnumCRLContextProperties, crypt32, 'CertEnumCRLContextProperties');
asm
MOV ESP, EBP
POP EBP
JMP [_CertEnumCRLContextProperties]
end;
end;
var
_CertFindCertificateInCRL: Pointer;
function CertFindCertificateInCRL;
begin
GetProcedureAddress(_CertFindCertificateInCRL, crypt32, 'CertFindCertificateInCRL');
asm
MOV ESP, EBP
POP EBP
JMP [_CertFindCertificateInCRL]
end;
end;
var
_CertAddEncodedCertToStore: Pointer;
function CertAddEncodedCertificateToStore;
begin
GetProcedureAddress(_CertAddEncodedCertToStore, crypt32, 'CertAddEncodedCertificateToStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertAddEncodedCertToStore]
end;
end;
var
_CertAddCertContextToStore: Pointer;
function CertAddCertificateContextToStore;
begin
GetProcedureAddress(_CertAddCertContextToStore, crypt32, 'CertAddCertificateContextToStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertAddCertContextToStore]
end;
end;
var
_CertAddSerializedElementToStore: Pointer;
function CertAddSerializedElementToStore;
begin
GetProcedureAddress(_CertAddSerializedElementToStore, crypt32, 'CertAddSerializedElementToStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertAddSerializedElementToStore]
end;
end;
var
_CertDeleteCertificateFromStore: Pointer;
function CertDeleteCertificateFromStore;
begin
GetProcedureAddress(_CertDeleteCertificateFromStore, crypt32, 'CertDeleteCertificateFromStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertDeleteCertificateFromStore]
end;
end;
var
_CertAddEncodedCRLToStore: Pointer;
function CertAddEncodedCRLToStore;
begin
GetProcedureAddress(_CertAddEncodedCRLToStore, crypt32, 'CertAddEncodedCRLToStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertAddEncodedCRLToStore]
end;
end;
var
_CertAddCRLContextToStore: Pointer;
function CertAddCRLContextToStore;
begin
GetProcedureAddress(_CertAddCRLContextToStore, crypt32, 'CertAddCRLContextToStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertAddCRLContextToStore]
end;
end;
var
_CertDeleteCRLFromStore: Pointer;
function CertDeleteCRLFromStore;
begin
GetProcedureAddress(_CertDeleteCRLFromStore, crypt32, 'CertDeleteCRLFromStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertDeleteCRLFromStore]
end;
end;
var
_CertSerializeCertStoreElement: Pointer;
function CertSerializeCertificateStoreElement;
begin
GetProcedureAddress(_CertSerializeCertStoreElement, crypt32, 'CertSerializeCertificateStoreElement');
asm
MOV ESP, EBP
POP EBP
JMP [_CertSerializeCertStoreElement]
end;
end;
var
_CertSerializeCRLStoreElement: Pointer;
function CertSerializeCRLStoreElement;
begin
GetProcedureAddress(_CertSerializeCRLStoreElement, crypt32, 'CertSerializeCRLStoreElement');
asm
MOV ESP, EBP
POP EBP
JMP [_CertSerializeCRLStoreElement]
end;
end;
var
_CertDuplicateCTLContext: Pointer;
function CertDuplicateCTLContext;
begin
GetProcedureAddress(_CertDuplicateCTLContext, crypt32, 'CertDuplicateCTLContext');
asm
MOV ESP, EBP
POP EBP
JMP [_CertDuplicateCTLContext]
end;
end;
var
_CertCreateCTLContext: Pointer;
function CertCreateCTLContext;
begin
GetProcedureAddress(_CertCreateCTLContext, crypt32, 'CertCreateCTLContext');
asm
MOV ESP, EBP
POP EBP
JMP [_CertCreateCTLContext]
end;
end;
var
_CertFreeCTLContext: Pointer;
function CertFreeCTLContext;
begin
GetProcedureAddress(_CertFreeCTLContext, crypt32, 'CertFreeCTLContext');
asm
MOV ESP, EBP
POP EBP
JMP [_CertFreeCTLContext]
end;
end;
var
_CertSetCTLContextProperty: Pointer;
function CertSetCTLContextProperty;
begin
GetProcedureAddress(_CertSetCTLContextProperty, crypt32, 'CertSetCTLContextProperty');
asm
MOV ESP, EBP
POP EBP
JMP [_CertSetCTLContextProperty]
end;
end;
var
_CertGetCTLContextProperty: Pointer;
function CertGetCTLContextProperty;
begin
GetProcedureAddress(_CertGetCTLContextProperty, crypt32, 'CertGetCTLContextProperty');
asm
MOV ESP, EBP
POP EBP
JMP [_CertGetCTLContextProperty]
end;
end;
var
_CertEnumCTLContextProperties: Pointer;
function CertEnumCTLContextProperties;
begin
GetProcedureAddress(_CertEnumCTLContextProperties, crypt32, 'CertEnumCTLContextProperties');
asm
MOV ESP, EBP
POP EBP
JMP [_CertEnumCTLContextProperties]
end;
end;
var
_CertEnumCTLsInStore: Pointer;
function CertEnumCTLsInStore;
begin
GetProcedureAddress(_CertEnumCTLsInStore, crypt32, 'CertEnumCTLsInStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertEnumCTLsInStore]
end;
end;
var
_CertFindSubjectInCTL: Pointer;
function CertFindSubjectInCTL;
begin
GetProcedureAddress(_CertFindSubjectInCTL, crypt32, 'CertFindSubjectInCTL');
asm
MOV ESP, EBP
POP EBP
JMP [_CertFindSubjectInCTL]
end;
end;
var
_CertFindCTLInStore: Pointer;
function CertFindCTLInStore;
begin
GetProcedureAddress(_CertFindCTLInStore, crypt32, 'CertFindCTLInStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertFindCTLInStore]
end;
end;
var
_CertAddEncodedCTLToStore: Pointer;
function CertAddEncodedCTLToStore;
begin
GetProcedureAddress(_CertAddEncodedCTLToStore, crypt32, 'CertAddEncodedCTLToStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertAddEncodedCTLToStore]
end;
end;
var
_CertAddCTLContextToStore: Pointer;
function CertAddCTLContextToStore;
begin
GetProcedureAddress(_CertAddCTLContextToStore, crypt32, 'CertAddCTLContextToStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertAddCTLContextToStore]
end;
end;
var
_CertSerializeCTLStoreElement: Pointer;
function CertSerializeCTLStoreElement;
begin
GetProcedureAddress(_CertSerializeCTLStoreElement, crypt32, 'CertSerializeCTLStoreElement');
asm
MOV ESP, EBP
POP EBP
JMP [_CertSerializeCTLStoreElement]
end;
end;
var
_CertDeleteCTLFromStore: Pointer;
function CertDeleteCTLFromStore;
begin
GetProcedureAddress(_CertDeleteCTLFromStore, crypt32, 'CertDeleteCTLFromStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertDeleteCTLFromStore]
end;
end;
var
_CertAddCertificateLinkToStore: Pointer;
function CertAddCertificateLinkToStore;
begin
GetProcedureAddress(_CertAddCertificateLinkToStore, crypt32, 'CertAddCertificateLinkToStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertAddCertificateLinkToStore]
end;
end;
var
_CertAddCRLLinkToStore: Pointer;
function CertAddCRLLinkToStore;
begin
GetProcedureAddress(_CertAddCRLLinkToStore, crypt32, 'CertAddCRLLinkToStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertAddCRLLinkToStore]
end;
end;
var
_CertAddCTLLinkToStore: Pointer;
function CertAddCTLLinkToStore;
begin
GetProcedureAddress(_CertAddCTLLinkToStore, crypt32, 'CertAddCTLLinkToStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertAddCTLLinkToStore]
end;
end;
var
_CertAddStoreToCollection: Pointer;
function CertAddStoreToCollection;
begin
GetProcedureAddress(_CertAddStoreToCollection, crypt32, 'CertAddStoreToCollection');
asm
MOV ESP, EBP
POP EBP
JMP [_CertAddStoreToCollection]
end;
end;
var
_CertRemoveStoreFromCollection: Pointer;
procedure CertRemoveStoreFromCollection;
begin
GetProcedureAddress(_CertRemoveStoreFromCollection, crypt32, 'CertRemoveStoreFromCollection');
asm
MOV ESP, EBP
POP EBP
JMP [_CertRemoveStoreFromCollection]
end;
end;
var
_CertControlStore: Pointer;
function CertControlStore;
begin
GetProcedureAddress(_CertControlStore, crypt32, 'CertControlStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertControlStore]
end;
end;
var
_CertSetStoreProperty: Pointer;
function CertSetStoreProperty;
begin
GetProcedureAddress(_CertSetStoreProperty, crypt32, 'CertSetStoreProperty');
asm
MOV ESP, EBP
POP EBP
JMP [_CertSetStoreProperty]
end;
end;
var
_CertGetStoreProperty: Pointer;
function CertGetStoreProperty;
begin
GetProcedureAddress(_CertGetStoreProperty, crypt32, 'CertGetStoreProperty');
asm
MOV ESP, EBP
POP EBP
JMP [_CertGetStoreProperty]
end;
end;
var
_CertCreateContext: Pointer;
function CertCreateContext;
begin
GetProcedureAddress(_CertCreateContext, crypt32, 'CertCreateContext');
asm
MOV ESP, EBP
POP EBP
JMP [_CertCreateContext]
end;
end;
var
_CertRegisterSystemStore: Pointer;
function CertRegisterSystemStore;
begin
GetProcedureAddress(_CertRegisterSystemStore, crypt32, 'CertRegisterSystemStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertRegisterSystemStore]
end;
end;
var
_CertRegisterPhysicalStore: Pointer;
function CertRegisterPhysicalStore;
begin
GetProcedureAddress(_CertRegisterPhysicalStore, crypt32, 'CertRegisterPhysicalStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertRegisterPhysicalStore]
end;
end;
var
_CertUnregisterSystemStore: Pointer;
function CertUnregisterSystemStore;
begin
GetProcedureAddress(_CertUnregisterSystemStore, crypt32, 'CertUnregisterSystemStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertUnregisterSystemStore]
end;
end;
var
_CertUnregisterPhysicalStore: Pointer;
function CertUnregisterPhysicalStore;
begin
GetProcedureAddress(_CertUnregisterPhysicalStore, crypt32, 'CertUnregisterPhysicalStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertUnregisterPhysicalStore]
end;
end;
var
_CertEnumSystemStoreLocation: Pointer;
function CertEnumSystemStoreLocation;
begin
GetProcedureAddress(_CertEnumSystemStoreLocation, crypt32, 'CertEnumSystemStoreLocation');
asm
MOV ESP, EBP
POP EBP
JMP [_CertEnumSystemStoreLocation]
end;
end;
var
_CertEnumSystemStore: Pointer;
function CertEnumSystemStore;
begin
GetProcedureAddress(_CertEnumSystemStore, crypt32, 'CertEnumSystemStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertEnumSystemStore]
end;
end;
var
_CertEnumPhysicalStore: Pointer;
function CertEnumPhysicalStore;
begin
GetProcedureAddress(_CertEnumPhysicalStore, crypt32, 'CertEnumPhysicalStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertEnumPhysicalStore]
end;
end;
var
_CertGetEnhancedKeyUsage: Pointer;
function CertGetEnhancedKeyUsage;
begin
GetProcedureAddress(_CertGetEnhancedKeyUsage, crypt32, 'CertGetEnhancedKeyUsage');
asm
MOV ESP, EBP
POP EBP
JMP [_CertGetEnhancedKeyUsage]
end;
end;
var
_CertSetEnhancedKeyUsage: Pointer;
function CertSetEnhancedKeyUsage;
begin
GetProcedureAddress(_CertSetEnhancedKeyUsage, crypt32, 'CertSetEnhancedKeyUsage');
asm
MOV ESP, EBP
POP EBP
JMP [_CertSetEnhancedKeyUsage]
end;
end;
var
_CertAddEnhKeyUsageIdentifier: Pointer;
function CertAddEnhancedKeyUsageIdentifier;
begin
GetProcedureAddress(_CertAddEnhKeyUsageIdentifier, crypt32, 'CertAddEnhancedKeyUsageIdentifier');
asm
MOV ESP, EBP
POP EBP
JMP [_CertAddEnhKeyUsageIdentifier]
end;
end;
var
_CertRemoveEnhKeyUsageIdent: Pointer;
function CertRemoveEnhancedKeyUsageIdentifier;
begin
GetProcedureAddress(_CertRemoveEnhKeyUsageIdent, crypt32, 'CertRemoveEnhancedKeyUsageIdentifier');
asm
MOV ESP, EBP
POP EBP
JMP [_CertRemoveEnhKeyUsageIdent]
end;
end;
var
_CertGetValidUsages: Pointer;
function CertGetValidUsages;
begin
GetProcedureAddress(_CertGetValidUsages, crypt32, 'CertGetValidUsages');
asm
MOV ESP, EBP
POP EBP
JMP [_CertGetValidUsages]
end;
end;
var
_CryptMsgGetAndVerifySigner: Pointer;
function CryptMsgGetAndVerifySigner;
begin
GetProcedureAddress(_CryptMsgGetAndVerifySigner, crypt32, 'CryptMsgGetAndVerifySigner');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptMsgGetAndVerifySigner]
end;
end;
var
_CryptMsgSignCTL: Pointer;
function CryptMsgSignCTL;
begin
GetProcedureAddress(_CryptMsgSignCTL, crypt32, 'CryptMsgSignCTL');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptMsgSignCTL]
end;
end;
var
_CryptMsgEncodeAndSignCTL: Pointer;
function CryptMsgEncodeAndSignCTL;
begin
GetProcedureAddress(_CryptMsgEncodeAndSignCTL, crypt32, 'CryptMsgEncodeAndSignCTL');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptMsgEncodeAndSignCTL]
end;
end;
var
_CertFindSubjectInSortedCTL: Pointer;
function CertFindSubjectInSortedCTL;
begin
GetProcedureAddress(_CertFindSubjectInSortedCTL, crypt32, 'CertFindSubjectInSortedCTL');
asm
MOV ESP, EBP
POP EBP
JMP [_CertFindSubjectInSortedCTL]
end;
end;
var
_CertEnumSubjectInSortedCTL: Pointer;
function CertEnumSubjectInSortedCTL;
begin
GetProcedureAddress(_CertEnumSubjectInSortedCTL, crypt32, 'CertEnumSubjectInSortedCTL');
asm
MOV ESP, EBP
POP EBP
JMP [_CertEnumSubjectInSortedCTL]
end;
end;
var
_CertVerifyCTLUsage: Pointer;
function CertVerifyCTLUsage;
begin
GetProcedureAddress(_CertVerifyCTLUsage, crypt32, 'CertVerifyCTLUsage');
asm
MOV ESP, EBP
POP EBP
JMP [_CertVerifyCTLUsage]
end;
end;
var
_CertVerifyRevocation: Pointer;
function CertVerifyRevocation;
begin
GetProcedureAddress(_CertVerifyRevocation, crypt32, 'CertVerifyRevocation');
asm
MOV ESP, EBP
POP EBP
JMP [_CertVerifyRevocation]
end;
end;
var
_CertCompareIntegerBlob: Pointer;
function CertCompareIntegerBlob;
begin
GetProcedureAddress(_CertCompareIntegerBlob, crypt32, 'CertCompareIntegerBlob');
asm
MOV ESP, EBP
POP EBP
JMP [_CertCompareIntegerBlob]
end;
end;
var
_CertCompareCertificate: Pointer;
function CertCompareCertificate;
begin
GetProcedureAddress(_CertCompareCertificate, crypt32, 'CertCompareCertificate');
asm
MOV ESP, EBP
POP EBP
JMP [_CertCompareCertificate]
end;
end;
var
_CertCompareCertificateName: Pointer;
function CertCompareCertificateName;
begin
GetProcedureAddress(_CertCompareCertificateName, crypt32, 'CertCompareCertificateName');
asm
MOV ESP, EBP
POP EBP
JMP [_CertCompareCertificateName]
end;
end;
var
_CertIsRDNAttrsInCertificateName: Pointer;
function CertIsRDNAttrsInCertificateName;
begin
GetProcedureAddress(_CertIsRDNAttrsInCertificateName, crypt32, 'CertIsRDNAttrsInCertificateName');
asm
MOV ESP, EBP
POP EBP
JMP [_CertIsRDNAttrsInCertificateName]
end;
end;
var
_CertComparePublicKeyInfo: Pointer;
function CertComparePublicKeyInfo;
begin
GetProcedureAddress(_CertComparePublicKeyInfo, crypt32, 'CertComparePublicKeyInfo');
asm
MOV ESP, EBP
POP EBP
JMP [_CertComparePublicKeyInfo]
end;
end;
var
_CertGetPublicKeyLength: Pointer;
function CertGetPublicKeyLength;
begin
GetProcedureAddress(_CertGetPublicKeyLength, crypt32, 'CertGetPublicKeyLength');
asm
MOV ESP, EBP
POP EBP
JMP [_CertGetPublicKeyLength]
end;
end;
var
_CryptVerifyCertificateSignature: Pointer;
function CryptVerifyCertificateSignature;
begin
GetProcedureAddress(_CryptVerifyCertificateSignature, crypt32, 'CryptVerifyCertificateSignature');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptVerifyCertificateSignature]
end;
end;
var
_CryptVerifyCertSignatureEx: Pointer;
function CryptVerifyCertificateSignatureEx;
begin
GetProcedureAddress(_CryptVerifyCertSignatureEx, crypt32, 'CryptVerifyCertificateSignatureEx');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptVerifyCertSignatureEx]
end;
end;
var
_CryptHashToBeSigned: Pointer;
function CryptHashToBeSigned;
begin
GetProcedureAddress(_CryptHashToBeSigned, crypt32, 'CryptHashToBeSigned');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptHashToBeSigned]
end;
end;
var
_CryptHashCertificate: Pointer;
function CryptHashCertificate;
begin
GetProcedureAddress(_CryptHashCertificate, crypt32, 'CryptHashCertificate');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptHashCertificate]
end;
end;
var
_CryptSignCertificate: Pointer;
function CryptSignCertificate;
begin
GetProcedureAddress(_CryptSignCertificate, crypt32, 'CryptSignCertificate');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptSignCertificate]
end;
end;
var
_CryptSignAndEncodeCertificate: Pointer;
function CryptSignAndEncodeCertificate;
begin
GetProcedureAddress(_CryptSignAndEncodeCertificate, crypt32, 'CryptSignAndEncodeCertificate');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptSignAndEncodeCertificate]
end;
end;
var
_CertVerifyTimeValidity: Pointer;
function CertVerifyTimeValidity;
begin
GetProcedureAddress(_CertVerifyTimeValidity, crypt32, 'CertVerifyTimeValidity');
asm
MOV ESP, EBP
POP EBP
JMP [_CertVerifyTimeValidity]
end;
end;
var
_CertVerifyCRLTimeValidity: Pointer;
function CertVerifyCRLTimeValidity;
begin
GetProcedureAddress(_CertVerifyCRLTimeValidity, crypt32, 'CertVerifyCRLTimeValidity');
asm
MOV ESP, EBP
POP EBP
JMP [_CertVerifyCRLTimeValidity]
end;
end;
var
_CertVerifyValidityNesting: Pointer;
function CertVerifyValidityNesting;
begin
GetProcedureAddress(_CertVerifyValidityNesting, crypt32, 'CertVerifyValidityNesting');
asm
MOV ESP, EBP
POP EBP
JMP [_CertVerifyValidityNesting]
end;
end;
var
_CertVerifyCRLRevocation: Pointer;
function CertVerifyCRLRevocation;
begin
GetProcedureAddress(_CertVerifyCRLRevocation, crypt32, 'CertVerifyCRLRevocation');
asm
MOV ESP, EBP
POP EBP
JMP [_CertVerifyCRLRevocation]
end;
end;
var
_CertAlgIdToOID: Pointer;
function CertAlgIdToOID;
begin
GetProcedureAddress(_CertAlgIdToOID, crypt32, 'CertAlgIdToOID');
asm
MOV ESP, EBP
POP EBP
JMP [_CertAlgIdToOID]
end;
end;
var
_CertOIDToAlgId: Pointer;
function CertOIDToAlgId;
begin
GetProcedureAddress(_CertOIDToAlgId, crypt32, 'CertOIDToAlgId');
asm
MOV ESP, EBP
POP EBP
JMP [_CertOIDToAlgId]
end;
end;
var
_CertFindExtension: Pointer;
function CertFindExtension;
begin
GetProcedureAddress(_CertFindExtension, crypt32, 'CertFindExtension');
asm
MOV ESP, EBP
POP EBP
JMP [_CertFindExtension]
end;
end;
var
_CertFindAttribute: Pointer;
function CertFindAttribute;
begin
GetProcedureAddress(_CertFindAttribute, crypt32, 'CertFindAttribute');
asm
MOV ESP, EBP
POP EBP
JMP [_CertFindAttribute]
end;
end;
var
_CertFindRDNAttr: Pointer;
function CertFindRDNAttr;
begin
GetProcedureAddress(_CertFindRDNAttr, crypt32, 'CertFindRDNAttr');
asm
MOV ESP, EBP
POP EBP
JMP [_CertFindRDNAttr]
end;
end;
var
_CertGetIntendedKeyUsage: Pointer;
function CertGetIntendedKeyUsage;
begin
GetProcedureAddress(_CertGetIntendedKeyUsage, crypt32, 'CertGetIntendedKeyUsage');
asm
MOV ESP, EBP
POP EBP
JMP [_CertGetIntendedKeyUsage]
end;
end;
var
_CryptInstallDefaultContext: Pointer;
function CryptInstallDefaultContext;
begin
GetProcedureAddress(_CryptInstallDefaultContext, crypt32, 'CryptInstallDefaultContext');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptInstallDefaultContext]
end;
end;
var
_CryptUninstallDefaultContext: Pointer;
function CryptUninstallDefaultContext;
begin
GetProcedureAddress(_CryptUninstallDefaultContext, crypt32, 'CryptUninstallDefaultContext');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptUninstallDefaultContext]
end;
end;
var
_CryptExportPublicKeyInfo: Pointer;
function CryptExportPublicKeyInfo;
begin
GetProcedureAddress(_CryptExportPublicKeyInfo, crypt32, 'CryptExportPublicKeyInfo');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptExportPublicKeyInfo]
end;
end;
var
_CryptExportPublicKeyInfoEx: Pointer;
function CryptExportPublicKeyInfoEx;
begin
GetProcedureAddress(_CryptExportPublicKeyInfoEx, crypt32, 'CryptExportPublicKeyInfoEx');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptExportPublicKeyInfoEx]
end;
end;
var
_CryptImportPublicKeyInfo: Pointer;
function CryptImportPublicKeyInfo;
begin
GetProcedureAddress(_CryptImportPublicKeyInfo, crypt32, 'CryptImportPublicKeyInfo');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptImportPublicKeyInfo]
end;
end;
var
_CryptImportPublicKeyInfoEx: Pointer;
function CryptImportPublicKeyInfoEx;
begin
GetProcedureAddress(_CryptImportPublicKeyInfoEx, crypt32, 'CryptImportPublicKeyInfoEx');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptImportPublicKeyInfoEx]
end;
end;
var
_CryptAcquireCertPrivateKey: Pointer;
function CryptAcquireCertificatePrivateKey;
begin
GetProcedureAddress(_CryptAcquireCertPrivateKey, crypt32, 'CryptAcquireCertificatePrivateKey');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptAcquireCertPrivateKey]
end;
end;
var
_CryptFindCertificateKeyProvInfo: Pointer;
function CryptFindCertificateKeyProvInfo;
begin
GetProcedureAddress(_CryptFindCertificateKeyProvInfo, crypt32, 'CryptFindCertificateKeyProvInfo');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptFindCertificateKeyProvInfo]
end;
end;
var
_CryptImportPKCS8: Pointer;
function CryptImportPKCS8;
begin
GetProcedureAddress(_CryptImportPKCS8, crypt32, 'CryptImportPKCS8');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptImportPKCS8]
end;
end;
var
_CryptExportPKCS8: Pointer;
function CryptExportPKCS8;
begin
GetProcedureAddress(_CryptExportPKCS8, crypt32, 'CryptExportPKCS8');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptExportPKCS8]
end;
end;
var
_CryptExportPKCS8Ex: Pointer;
function CryptExportPKCS8Ex;
begin
GetProcedureAddress(_CryptExportPKCS8Ex, crypt32, 'CryptExportPKCS8Ex');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptExportPKCS8Ex]
end;
end;
var
_CryptHashPublicKeyInfo: Pointer;
function CryptHashPublicKeyInfo;
begin
GetProcedureAddress(_CryptHashPublicKeyInfo, crypt32, 'CryptHashPublicKeyInfo');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptHashPublicKeyInfo]
end;
end;
var
_CertRDNValueToStrA: Pointer;
function CertRDNValueToStrA;
begin
GetProcedureAddress(_CertRDNValueToStrA, crypt32, 'CertRDNValueToStrA');
asm
MOV ESP, EBP
POP EBP
JMP [_CertRDNValueToStrA]
end;
end;
var
_CertRDNValueToStrW: Pointer;
function CertRDNValueToStrW;
begin
GetProcedureAddress(_CertRDNValueToStrW, crypt32, 'CertRDNValueToStrW');
asm
MOV ESP, EBP
POP EBP
JMP [_CertRDNValueToStrW]
end;
end;
var
_CertRDNValueToStr: Pointer;
function CertRDNValueToStr;
begin
GetProcedureAddress(_CertRDNValueToStr, crypt32, 'CertRDNValueToStr' + AWSuffix);
asm
MOV ESP, EBP
POP EBP
JMP [_CertRDNValueToStr]
end;
end;
var
_CertNameToStrA: Pointer;
function CertNameToStrA;
begin
GetProcedureAddress(_CertNameToStrA, crypt32, 'CertNameToStrA');
asm
MOV ESP, EBP
POP EBP
JMP [_CertNameToStrA]
end;
end;
var
_CertNameToStrW: Pointer;
function CertNameToStrW;
begin
GetProcedureAddress(_CertNameToStrW, crypt32, 'CertNameToStrW');
asm
MOV ESP, EBP
POP EBP
JMP [_CertNameToStrW]
end;
end;
var
_CertNameToStr: Pointer;
function CertNameToStr;
begin
GetProcedureAddress(_CertNameToStr, crypt32, 'CertNameToStr' + AWSuffix);
asm
MOV ESP, EBP
POP EBP
JMP [_CertNameToStr]
end;
end;
var
_CertStrToNameA: Pointer;
function CertStrToNameA;
begin
GetProcedureAddress(_CertStrToNameA, crypt32, 'CertStrToNameA');
asm
MOV ESP, EBP
POP EBP
JMP [_CertStrToNameA]
end;
end;
var
_CertStrToNameW: Pointer;
function CertStrToNameW;
begin
GetProcedureAddress(_CertStrToNameW, crypt32, 'CertStrToNameW');
asm
MOV ESP, EBP
POP EBP
JMP [_CertStrToNameW]
end;
end;
var
_CertStrToName: Pointer;
function CertStrToName;
begin
GetProcedureAddress(_CertStrToName, crypt32, 'CertStrToName' + AWSuffix);
asm
MOV ESP, EBP
POP EBP
JMP [_CertStrToName]
end;
end;
var
_CertGetNameStringA: Pointer;
function CertGetNameStringA;
begin
GetProcedureAddress(_CertGetNameStringA, crypt32, 'CertGetNameStringA');
asm
MOV ESP, EBP
POP EBP
JMP [_CertGetNameStringA]
end;
end;
var
_CertGetNameStringW: Pointer;
function CertGetNameStringW;
begin
GetProcedureAddress(_CertGetNameStringW, crypt32, 'CertGetNameStringW');
asm
MOV ESP, EBP
POP EBP
JMP [_CertGetNameStringW]
end;
end;
var
_CertGetNameString: Pointer;
function CertGetNameString;
begin
GetProcedureAddress(_CertGetNameString, crypt32, 'CertGetNameString' + AWSuffix);
asm
MOV ESP, EBP
POP EBP
JMP [_CertGetNameString]
end;
end;
var
_CryptSignMessage: Pointer;
function CryptSignMessage;
begin
GetProcedureAddress(_CryptSignMessage, crypt32, 'CryptSignMessage');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptSignMessage]
end;
end;
var
_CryptVerifyMessageSignature: Pointer;
function CryptVerifyMessageSignature;
begin
GetProcedureAddress(_CryptVerifyMessageSignature, crypt32, 'CryptVerifyMessageSignature');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptVerifyMessageSignature]
end;
end;
var
_CryptGetMessageSignerCount: Pointer;
function CryptGetMessageSignerCount;
begin
GetProcedureAddress(_CryptGetMessageSignerCount, crypt32, 'CryptGetMessageSignerCount');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptGetMessageSignerCount]
end;
end;
var
_CryptGetMessageCertificates: Pointer;
function CryptGetMessageCertificates;
begin
GetProcedureAddress(_CryptGetMessageCertificates, crypt32, 'CryptGetMessageCertificates');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptGetMessageCertificates]
end;
end;
var
_CryptVerDetachedMsgSignature: Pointer;
function CryptVerifyDetachedMessageSignature;
begin
GetProcedureAddress(_CryptVerDetachedMsgSignature, crypt32, 'CryptVerifyDetachedMessageSignature');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptVerDetachedMsgSignature]
end;
end;
var
_CryptEncryptMessage: Pointer;
function CryptEncryptMessage;
begin
GetProcedureAddress(_CryptEncryptMessage, crypt32, 'CryptEncryptMessage');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptEncryptMessage]
end;
end;
var
_CryptDecryptMessage: Pointer;
function CryptDecryptMessage;
begin
GetProcedureAddress(_CryptDecryptMessage, crypt32, 'CryptDecryptMessage');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptDecryptMessage]
end;
end;
var
_CryptSignAndEncryptMessage: Pointer;
function CryptSignAndEncryptMessage;
begin
GetProcedureAddress(_CryptSignAndEncryptMessage, crypt32, 'CryptSignAndEncryptMessage');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptSignAndEncryptMessage]
end;
end;
var
_CryptDecryptAndVerMsgSig: Pointer;
function CryptDecryptAndVerifyMessageSignature;
begin
GetProcedureAddress(_CryptDecryptAndVerMsgSig, crypt32, 'CryptDecryptAndVerifyMessageSignature');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptDecryptAndVerMsgSig]
end;
end;
var
_CryptDecodeMessage: Pointer;
function CryptDecodeMessage;
begin
GetProcedureAddress(_CryptDecodeMessage, crypt32, 'CryptDecodeMessage');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptDecodeMessage]
end;
end;
var
_CryptHashMessage: Pointer;
function CryptHashMessage;
begin
GetProcedureAddress(_CryptHashMessage, crypt32, 'CryptHashMessage');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptHashMessage]
end;
end;
var
_CryptVerifyMessageHash: Pointer;
function CryptVerifyMessageHash;
begin
GetProcedureAddress(_CryptVerifyMessageHash, crypt32, 'CryptVerifyMessageHash');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptVerifyMessageHash]
end;
end;
var
_CryptVerifyDetachedMessageHash: Pointer;
function CryptVerifyDetachedMessageHash;
begin
GetProcedureAddress(_CryptVerifyDetachedMessageHash, crypt32, 'CryptVerifyDetachedMessageHash');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptVerifyDetachedMessageHash]
end;
end;
var
_CryptSignMessageWithKey: Pointer;
function CryptSignMessageWithKey;
begin
GetProcedureAddress(_CryptSignMessageWithKey, crypt32, 'CryptSignMessageWithKey');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptSignMessageWithKey]
end;
end;
var
_CryptVerifyMsgSigWithKey: Pointer;
function CryptVerifyMessageSignatureWithKey;
begin
GetProcedureAddress(_CryptVerifyMsgSigWithKey, crypt32, 'CryptVerifyMessageSignatureWithKey');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptVerifyMsgSigWithKey]
end;
end;
var
_CertOpenSystemStoreA: Pointer;
function CertOpenSystemStoreA;
begin
GetProcedureAddress(_CertOpenSystemStoreA, crypt32, 'CertOpenSystemStoreA');
asm
MOV ESP, EBP
POP EBP
JMP [_CertOpenSystemStoreA]
end;
end;
var
_CertOpenSystemStoreW: Pointer;
function CertOpenSystemStoreW;
begin
GetProcedureAddress(_CertOpenSystemStoreW, crypt32, 'CertOpenSystemStoreW');
asm
MOV ESP, EBP
POP EBP
JMP [_CertOpenSystemStoreW]
end;
end;
var
_CertOpenSystemStore: Pointer;
function CertOpenSystemStore;
begin
GetProcedureAddress(_CertOpenSystemStore, crypt32, 'CertOpenSystemStore' + AWSuffix);
asm
MOV ESP, EBP
POP EBP
JMP [_CertOpenSystemStore]
end;
end;
var
_CertAddEncodedCertToSysStoreA: Pointer;
function CertAddEncodedCertificateToSystemStoreA;
begin
GetProcedureAddress(_CertAddEncodedCertToSysStoreA, crypt32, 'CertAddEncodedCertificateToSystemStoreA');
asm
MOV ESP, EBP
POP EBP
JMP [_CertAddEncodedCertToSysStoreA]
end;
end;
var
_CertAddEncodedCertToSysStoreW: Pointer;
function CertAddEncodedCertificateToSystemStoreW;
begin
GetProcedureAddress(_CertAddEncodedCertToSysStoreW, crypt32, 'CertAddEncodedCertificateToSystemStoreW');
asm
MOV ESP, EBP
POP EBP
JMP [_CertAddEncodedCertToSysStoreW]
end;
end;
var
_CertAddEncodedCertToSysStore: Pointer;
function CertAddEncodedCertificateToSystemStore;
begin
GetProcedureAddress(_CertAddEncodedCertToSysStore, crypt32, 'CertAddEncodedCertificateToSystemStore' + AWSuffix);
asm
MOV ESP, EBP
POP EBP
JMP [_CertAddEncodedCertToSysStore]
end;
end;
var
_FindCertsByIssuer: Pointer;
function FindCertsByIssuer;
begin
GetProcedureAddress(_FindCertsByIssuer, softpub, 'FindCertsByIssuer');
asm
MOV ESP, EBP
POP EBP
JMP [_FindCertsByIssuer]
end;
end;
var
_CryptQueryObject: Pointer;
function CryptQueryObject;
begin
GetProcedureAddress(_CryptQueryObject, crypt32, 'CryptQueryObject');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptQueryObject]
end;
end;
var
_CryptMemAlloc: Pointer;
function CryptMemAlloc;
begin
GetProcedureAddress(_CryptMemAlloc, crypt32, 'CryptMemAlloc');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptMemAlloc]
end;
end;
var
_CryptMemRealloc: Pointer;
function CryptMemRealloc;
begin
GetProcedureAddress(_CryptMemRealloc, crypt32, 'CryptMemRealloc');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptMemRealloc]
end;
end;
var
_CryptMemFree: Pointer;
procedure CryptMemFree;
begin
GetProcedureAddress(_CryptMemFree, crypt32, 'CryptMemFree');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptMemFree]
end;
end;
var
_CryptCreateAsyncHandle: Pointer;
function CryptCreateAsyncHandle;
begin
GetProcedureAddress(_CryptCreateAsyncHandle, crypt32, 'CryptCreateAsyncHandle');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptCreateAsyncHandle]
end;
end;
var
_CryptSetAsyncParam: Pointer;
function CryptSetAsyncParam;
begin
GetProcedureAddress(_CryptSetAsyncParam, crypt32, 'CryptSetAsyncParam');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptSetAsyncParam]
end;
end;
var
_CryptGetAsyncParam: Pointer;
function CryptGetAsyncParam;
begin
GetProcedureAddress(_CryptGetAsyncParam, crypt32, 'CryptGetAsyncParam');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptGetAsyncParam]
end;
end;
var
_CryptCloseAsyncHandle: Pointer;
function CryptCloseAsyncHandle;
begin
GetProcedureAddress(_CryptCloseAsyncHandle, crypt32, 'CryptCloseAsyncHandle');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptCloseAsyncHandle]
end;
end;
var
_CryptRetrieveObjectByUrlA: Pointer;
function CryptRetrieveObjectByUrlA;
begin
GetProcedureAddress(_CryptRetrieveObjectByUrlA, cryptnet, 'CryptRetrieveObjectByUrlA');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptRetrieveObjectByUrlA]
end;
end;
var
_CryptRetrieveObjectByUrlW: Pointer;
function CryptRetrieveObjectByUrlW;
begin
GetProcedureAddress(_CryptRetrieveObjectByUrlW, cryptnet, 'CryptRetrieveObjectByUrlW');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptRetrieveObjectByUrlW]
end;
end;
var
_CryptRetrieveObjectByUrl: Pointer;
function CryptRetrieveObjectByUrl;
begin
GetProcedureAddress(_CryptRetrieveObjectByUrl, cryptnet, 'CryptRetrieveObjectByUrl' + AWSuffix);
asm
MOV ESP, EBP
POP EBP
JMP [_CryptRetrieveObjectByUrl]
end;
end;
var
_CryptInstallCancelRetrieval: Pointer;
function CryptInstallCancelRetrieval;
begin
GetProcedureAddress(_CryptInstallCancelRetrieval, cryptnet, 'CryptInstallCancelRetrieval');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptInstallCancelRetrieval]
end;
end;
var
_CryptUninstallCancelRetrieval: Pointer;
function CryptUninstallCancelRetrieval;
begin
GetProcedureAddress(_CryptUninstallCancelRetrieval, cryptnet, 'CryptUninstallCancelRetrieval');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptUninstallCancelRetrieval]
end;
end;
var
_CryptCancelAsyncRetrieval: Pointer;
function CryptCancelAsyncRetrieval;
begin
GetProcedureAddress(_CryptCancelAsyncRetrieval, cryptnet, 'CryptCancelAsyncRetrieval');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptCancelAsyncRetrieval]
end;
end;
var
_CryptGetObjectUrl: Pointer;
function CryptGetObjectUrl;
begin
GetProcedureAddress(_CryptGetObjectUrl, cryptnet, 'CryptGetObjectUrl');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptGetObjectUrl]
end;
end;
var
_CryptGetTimeValidObject: Pointer;
function CryptGetTimeValidObject;
begin
GetProcedureAddress(_CryptGetTimeValidObject, cryptnet, 'CryptGetTimeValidObject');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptGetTimeValidObject]
end;
end;
var
_CryptFlushTimeValidObject: Pointer;
function CryptFlushTimeValidObject;
begin
GetProcedureAddress(_CryptFlushTimeValidObject, cryptnet, 'CryptFlushTimeValidObject');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptFlushTimeValidObject]
end;
end;
var
_CryptProtectData: Pointer;
function CryptProtectData;
begin
GetProcedureAddress(_CryptProtectData, crypt32, 'CryptProtectData');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptProtectData]
end;
end;
var
_CryptUnprotectData: Pointer;
function CryptUnprotectData;
begin
GetProcedureAddress(_CryptUnprotectData, crypt32, 'CryptUnprotectData');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptUnprotectData]
end;
end;
var
_CertCreateSelfSignCertificate: Pointer;
function CertCreateSelfSignCertificate;
begin
GetProcedureAddress(_CertCreateSelfSignCertificate, crypt32, 'CertCreateSelfSignCertificate');
asm
MOV ESP, EBP
POP EBP
JMP [_CertCreateSelfSignCertificate]
end;
end;
var
_CryptGetKeyIdentifierProperty: Pointer;
function CryptGetKeyIdentifierProperty;
begin
GetProcedureAddress(_CryptGetKeyIdentifierProperty, crypt32, 'CryptGetKeyIdentifierProperty');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptGetKeyIdentifierProperty]
end;
end;
var
_CryptSetKeyIdentifierProperty: Pointer;
function CryptSetKeyIdentifierProperty;
begin
GetProcedureAddress(_CryptSetKeyIdentifierProperty, crypt32, 'CryptSetKeyIdentifierProperty');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptSetKeyIdentifierProperty]
end;
end;
var
_CryptEnumKeyIdentProperties: Pointer;
function CryptEnumKeyIdentifierProperties;
begin
GetProcedureAddress(_CryptEnumKeyIdentProperties, crypt32, 'CryptEnumKeyIdentifierProperties');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptEnumKeyIdentProperties]
end;
end;
var
_CryptCreateKeyIdentifierFromCSP: Pointer;
function CryptCreateKeyIdentifierFromCSP;
begin
GetProcedureAddress(_CryptCreateKeyIdentifierFromCSP, crypt32, 'CryptCreateKeyIdentifierFromCSP');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptCreateKeyIdentifierFromCSP]
end;
end;
var
_CertCreateCertChainEngine: Pointer;
function CertCreateCertificateChainEngine;
begin
GetProcedureAddress(_CertCreateCertChainEngine, crypt32, 'CertCreateCertificateChainEngine');
asm
MOV ESP, EBP
POP EBP
JMP [_CertCreateCertChainEngine]
end;
end;
var
_CertFreeCertificateChainEngine: Pointer;
procedure CertFreeCertificateChainEngine;
begin
GetProcedureAddress(_CertFreeCertificateChainEngine, crypt32, 'CertFreeCertificateChainEngine');
asm
MOV ESP, EBP
POP EBP
JMP [_CertFreeCertificateChainEngine]
end;
end;
var
_CertResyncCertChainEngine: Pointer;
function CertResyncCertificateChainEngine;
begin
GetProcedureAddress(_CertResyncCertChainEngine, crypt32, 'CertResyncCertificateChainEngine');
asm
MOV ESP, EBP
POP EBP
JMP [_CertResyncCertChainEngine]
end;
end;
var
_CertGetCertificateChain: Pointer;
function CertGetCertificateChain;
begin
GetProcedureAddress(_CertGetCertificateChain, crypt32, 'CertGetCertificateChain');
asm
MOV ESP, EBP
POP EBP
JMP [_CertGetCertificateChain]
end;
end;
var
_CertFreeCertificateChain: Pointer;
procedure CertFreeCertificateChain;
begin
GetProcedureAddress(_CertFreeCertificateChain, crypt32, 'CertFreeCertificateChain');
asm
MOV ESP, EBP
POP EBP
JMP [_CertFreeCertificateChain]
end;
end;
var
_CertDuplicateCertificateChain: Pointer;
function CertDuplicateCertificateChain;
begin
GetProcedureAddress(_CertDuplicateCertificateChain, crypt32, 'CertDuplicateCertificateChain');
asm
MOV ESP, EBP
POP EBP
JMP [_CertDuplicateCertificateChain]
end;
end;
var
_CertFindChainInStore: Pointer;
function CertFindChainInStore;
begin
GetProcedureAddress(_CertFindChainInStore, crypt32, 'CertFindChainInStore');
asm
MOV ESP, EBP
POP EBP
JMP [_CertFindChainInStore]
end;
end;
var
_CertVerifyCertChainPolicy: Pointer;
function CertVerifyCertificateChainPolicy;
begin
GetProcedureAddress(_CertVerifyCertChainPolicy, crypt32, 'CertVerifyCertificateChainPolicy');
asm
MOV ESP, EBP
POP EBP
JMP [_CertVerifyCertChainPolicy]
end;
end;
var
_CryptBinaryToStringA: Pointer;
function CryptBinaryToStringA;
begin
GetProcedureAddress(_CryptBinaryToStringA, crypt32, 'CryptBinaryToStringA');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptBinaryToStringA]
end;
end;
var
_CryptBinaryToStringW: Pointer;
function CryptBinaryToStringW;
begin
GetProcedureAddress(_CryptBinaryToStringW, crypt32, 'CryptBinaryToStringW');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptBinaryToStringW]
end;
end;
var
_CryptStringToBinaryA: Pointer;
function CryptStringToBinaryA;
begin
GetProcedureAddress(_CryptStringToBinaryA, crypt32, 'CryptStringToBinaryA');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptStringToBinaryA]
end;
end;
var _CryptStringToBinaryW : Pointer;
function CryptStringToBinaryW;
begin
GetProcedureAddress(_CryptStringToBinaryW, crypt32, 'CryptStringToBinaryW');
asm
MOV ESP, EBP
POP EBP
JMP [_CryptStringToBinaryW]
end;
end;
var _CryptStringToBinary : Pointer;
function CryptStringToBinary;
begin
GetProcedureAddress(_CryptStringToBinary, advapi32, 'CryptStringToBinary' + AWSuffix);
asm
MOV ESP, EBP
POP EBP
JMP [_CryptStringToBinary]
end;
end;
var _CryptBinaryToString : Pointer;
function CryptBinaryToString;
begin
GetProcedureAddress(_CryptBinaryToString, advapi32, 'CryptBinaryToString' + AWSuffix);
asm
MOV ESP, EBP
POP EBP
JMP [_CryptBinaryToString]
end;
end;
{$ELSE}
function CryptAcquireContextA; external advapi32 name 'CryptAcquireContextA';
function CryptAcquireContextW; external advapi32 name 'CryptAcquireContextW';
function CryptAcquireContext; external advapi32 name 'CryptAcquireContext' + AWSuffix;
function CryptReleaseContext; external advapi32 name 'CryptReleaseContext';
function CryptGenKey; external advapi32 name 'CryptGenKey';
function CryptDeriveKey; external advapi32 name 'CryptDeriveKey';
function CryptDestroyKey; external advapi32 name 'CryptDestroyKey';
function CryptSetKeyParam; external advapi32 name 'CryptSetKeyParam';
function CryptGetKeyParam; external advapi32 name 'CryptGetKeyParam';
function CryptSetHashParam; external advapi32 name 'CryptSetHashParam';
function CryptGetHashParam; external advapi32 name 'CryptGetHashParam';
function CryptSetProvParam; external advapi32 name 'CryptSetProvParam';
function CryptGetProvParam; external advapi32 name 'CryptGetProvParam';
function CryptGenRandom; external advapi32 name 'CryptGenRandom';
function CryptGetUserKey; external advapi32 name 'CryptGetUserKey';
function CryptExportKey; external advapi32 name 'CryptExportKey';
function CryptImportKey; external advapi32 name 'CryptImportKey';
function CryptEncrypt; external advapi32 name 'CryptEncrypt';
function CryptDecrypt; external advapi32 name 'CryptDecrypt';
function CryptCreateHash; external advapi32 name 'CryptCreateHash';
function CryptHashData; external advapi32 name 'CryptHashData';
function CryptHashSessionKey; external advapi32 name 'CryptHashSessionKey';
function CryptDestroyHash; external advapi32 name 'CryptDestroyHash';
function CryptSignHashA; external advapi32 name 'CryptSignHashA';
function CryptSignHashW; external advapi32 name 'CryptSignHashW';
function CryptSignHash; external advapi32 name 'CryptSignHash' + AWSuffix;
function CryptVerifySignatureA; external advapi32 name 'CryptVerifySignatureA';
function CryptVerifySignatureW; external advapi32 name 'CryptVerifySignatureW';
function CryptVerifySignature; external advapi32 name 'CryptVerifySignature' + AWSuffix;
function CryptSetProviderA; external advapi32 name 'CryptSetProviderA';
function CryptSetProviderW; external advapi32 name 'CryptSetProviderW';
function CryptSetProvider; external advapi32 name 'CryptSetProvider' + AWSuffix;
function CryptSetProviderExA; external advapi32 name 'CryptSetProviderExA';
function CryptSetProviderExW; external advapi32 name 'CryptSetProviderExW';
function CryptSetProviderEx; external advapi32 name 'CryptSetProviderEx' + AWSuffix;
function CryptGetDefaultProviderA; external advapi32 name 'CryptGetDefaultProviderA';
function CryptGetDefaultProviderW; external advapi32 name 'CryptGetDefaultProviderW';
function CryptGetDefaultProvider; external advapi32 name 'CryptGetDefaultProvider' + AWSuffix;
function CryptEnumProviderTypesA; external advapi32 name 'CryptEnumProviderTypesA';
function CryptEnumProviderTypesW; external advapi32 name 'CryptEnumProviderTypesW';
function CryptEnumProviderTypes; external advapi32 name 'CryptEnumProviderTypes' + AWSuffix;
function CryptEnumProvidersA; external advapi32 name 'CryptEnumProvidersA';
function CryptEnumProvidersW; external advapi32 name 'CryptEnumProvidersW';
function CryptEnumProviders; external advapi32 name 'CryptEnumProviders' + AWSuffix;
function CryptContextAddRef; external advapi32 name 'CryptContextAddRef';
function CryptDuplicateKey; external advapi32 name 'CryptDuplicateKey';
function CryptDuplicateHash; external advapi32 name 'CryptDuplicateHash';
function CryptFormatObject; external crypt32 name 'CryptFormatObject';
function CryptEncodeObjectEx; external crypt32 name 'CryptEncodeObjectEx';
function CryptEncodeObject; external crypt32 name 'CryptEncodeObject';
function CryptDecodeObjectEx; external crypt32 name 'CryptDecodeObjectEx';
function CryptDecodeObject; external crypt32 name 'CryptDecodeObject';
function CryptInstallOIDFunctionAddress; external crypt32 name 'CryptInstallOIDFunctionAddress';
function CryptInitOIDFunctionSet; external crypt32 name 'CryptInitOIDFunctionSet';
function CryptGetOIDFunctionAddress; external crypt32 name 'CryptGetOIDFunctionAddress';
function CryptGetDefaultOIDDllList; external crypt32 name 'CryptGetDefaultOIDDllList';
function CryptGetDefaultOIDFunctionAddress; external crypt32 name 'CryptGetDefaultOIDFunctionAddress';
function CryptFreeOIDFunctionAddress; external crypt32 name 'CryptFreeOIDFunctionAddress';
function CryptRegisterOIDFunction; external crypt32 name 'CryptRegisterOIDFunction';
function CryptUnregisterOIDFunction; external crypt32 name 'CryptUnregisterOIDFunction';
function CryptRegisterDefaultOIDFunction; external crypt32 name 'CryptRegisterDefaultOIDFunction';
function CryptUnregisterDefaultOIDFunction; external crypt32 name 'CryptUnregisterDefaultOIDFunction';
function CryptSetOIDFunctionValue; external crypt32 name 'CryptSetOIDFunctionValue';
function CryptGetOIDFunctionValue; external crypt32 name 'CryptGetOIDFunctionValue';
function CryptEnumOIDFunction; external crypt32 name 'CryptEnumOIDFunction';
function CryptFindOIDInfo; external crypt32 name 'CryptFindOIDInfo';
function CryptRegisterOIDInfo; external crypt32 name 'CryptRegisterOIDInfo';
function CryptUnregisterOIDInfo; external crypt32 name 'CryptUnregisterOIDInfo';
function CryptEnumOIDInfo; external crypt32 name 'CryptEnumOIDInfo';
function CryptFindLocalizedName; external crypt32 name 'CryptFindLocalizedName';
function CryptMsgOpenToEncode; external crypt32 name 'CryptMsgOpenToEncode';
function CryptMsgCalculateEncodedLength; external crypt32 name 'CryptMsgCalculateEncodedLength';
function CryptMsgOpenToDecode; external crypt32 name 'CryptMsgOpenToDecode';
function CryptMsgDuplicate; external crypt32 name 'CryptMsgDuplicate';
function CryptMsgClose; external crypt32 name 'CryptMsgClose';
function CryptMsgUpdate; external crypt32 name 'CryptMsgUpdate';
function CryptMsgGetParam; external crypt32 name 'CryptMsgGetParam';
function CryptMsgControl; external crypt32 name 'CryptMsgControl';
function CryptMsgVerifyCountersignatureEncoded; external crypt32 name 'CryptMsgVerifyCountersignatureEncoded';
function CryptMsgVerifyCountersignatureEncodedEx; external crypt32 name 'CryptMsgVerifyCountersignatureEncodedEx';
function CryptMsgCountersign; external crypt32 name 'CryptMsgCountersign';
function CryptMsgCountersignEncoded; external crypt32 name 'CryptMsgCountersignEncoded';
function CertOpenStore; external crypt32 name 'CertOpenStore';
function CertDuplicateStore; external crypt32 name 'CertDuplicateStore';
function CertSaveStore; external crypt32 name 'CertSaveStore';
function CertCloseStore; external crypt32 name 'CertCloseStore';
function CertGetSubjectCertificateFromStore; external crypt32 name 'CertGetSubjectCertificateFromStore';
function CertEnumCertificatesInStore; external crypt32 name 'CertEnumCertificatesInStore';
function CertFindCertificateInStore; external crypt32 name 'CertFindCertificateInStore';
function CertGetIssuerCertificateFromStore; external crypt32 name 'CertGetIssuerCertificateFromStore';
function CertVerifySubjectCertificateContext; external crypt32 name 'CertVerifySubjectCertificateContext';
function CertDuplicateCertificateContext; external crypt32 name 'CertDuplicateCertificateContext';
function CertCreateCertificateContext; external crypt32 name 'CertCreateCertificateContext';
function CertFreeCertificateContext; external crypt32 name 'CertFreeCertificateContext';
function CertSetCertificateContextProperty; external crypt32 name 'CertSetCertificateContextProperty';
function CertGetCertificateContextProperty; external crypt32 name 'CertGetCertificateContextProperty';
function CertEnumCertificateContextProperties; external crypt32 name 'CertEnumCertificateContextProperties';
function CertGetCRLFromStore; external crypt32 name 'CertGetCRLFromStore';
function CertEnumCRLsInStore; external crypt32 name 'CertEnumCRLsInStore';
function CertFindCRLInStore; external crypt32 name 'CertFindCRLInStore';
function CertDuplicateCRLContext; external crypt32 name 'CertDuplicateCRLContext';
function CertCreateCRLContext; external crypt32 name 'CertCreateCRLContext';
function CertFreeCRLContext; external crypt32 name 'CertFreeCRLContext';
function CertSetCRLContextProperty; external crypt32 name 'CertSetCRLContextProperty';
function CertGetCRLContextProperty; external crypt32 name 'CertGetCRLContextProperty';
function CertEnumCRLContextProperties; external crypt32 name 'CertEnumCRLContextProperties';
function CertFindCertificateInCRL; external crypt32 name 'CertFindCertificateInCRL';
function CertAddEncodedCertificateToStore; external crypt32 name 'CertAddEncodedCertificateToStore';
function CertAddCertificateContextToStore; external crypt32 name 'CertAddCertificateContextToStore';
function CertAddSerializedElementToStore; external crypt32 name 'CertAddSerializedElementToStore';
function CertDeleteCertificateFromStore; external crypt32 name 'CertDeleteCertificateFromStore';
function CertAddEncodedCRLToStore; external crypt32 name 'CertAddEncodedCRLToStore';
function CertAddCRLContextToStore; external crypt32 name 'CertAddCRLContextToStore';
function CertDeleteCRLFromStore; external crypt32 name 'CertDeleteCRLFromStore';
function CertSerializeCertificateStoreElement; external crypt32 name 'CertSerializeCertificateStoreElement';
function CertSerializeCRLStoreElement; external crypt32 name 'CertSerializeCRLStoreElement';
function CertDuplicateCTLContext; external crypt32 name 'CertDuplicateCTLContext';
function CertCreateCTLContext; external crypt32 name 'CertCreateCTLContext';
function CertFreeCTLContext; external crypt32 name 'CertFreeCTLContext';
function CertSetCTLContextProperty; external crypt32 name 'CertSetCTLContextProperty';
function CertGetCTLContextProperty; external crypt32 name 'CertGetCTLContextProperty';
function CertEnumCTLContextProperties; external crypt32 name 'CertEnumCTLContextProperties';
function CertEnumCTLsInStore; external crypt32 name 'CertEnumCTLsInStore';
function CertFindSubjectInCTL; external crypt32 name 'CertFindSubjectInCTL';
function CertFindCTLInStore; external crypt32 name 'CertFindCTLInStore';
function CertAddEncodedCTLToStore; external crypt32 name 'CertAddEncodedCTLToStore';
function CertAddCTLContextToStore; external crypt32 name 'CertAddCTLContextToStore';
function CertSerializeCTLStoreElement; external crypt32 name 'CertSerializeCTLStoreElement';
function CertDeleteCTLFromStore; external crypt32 name 'CertDeleteCTLFromStore';
function CertAddCertificateLinkToStore; external crypt32 name 'CertAddCertificateLinkToStore';
function CertAddCRLLinkToStore; external crypt32 name 'CertAddCRLLinkToStore';
function CertAddCTLLinkToStore; external crypt32 name 'CertAddCTLLinkToStore';
function CertAddStoreToCollection; external crypt32 name 'CertAddStoreToCollection';
procedure CertRemoveStoreFromCollection; external crypt32 name 'CertRemoveStoreFromCollection';
function CertControlStore; external crypt32 name 'CertControlStore';
function CertSetStoreProperty; external crypt32 name 'CertSetStoreProperty';
function CertGetStoreProperty; external crypt32 name 'CertGetStoreProperty';
function CertCreateContext; external crypt32 name 'CertCreateContext';
function CertRegisterSystemStore; external crypt32 name 'CertRegisterSystemStore';
function CertRegisterPhysicalStore; external crypt32 name 'CertRegisterPhysicalStore';
function CertUnregisterSystemStore; external crypt32 name 'CertUnregisterSystemStore';
function CertUnregisterPhysicalStore; external crypt32 name 'CertUnregisterPhysicalStore';
function CertEnumSystemStoreLocation; external crypt32 name 'CertEnumSystemStoreLocation';
function CertEnumSystemStore; external crypt32 name 'CertEnumSystemStore';
function CertEnumPhysicalStore; external crypt32 name 'CertEnumPhysicalStore';
function CertGetEnhancedKeyUsage; external crypt32 name 'CertGetEnhancedKeyUsage';
function CertSetEnhancedKeyUsage; external crypt32 name 'CertSetEnhancedKeyUsage';
function CertAddEnhancedKeyUsageIdentifier; external crypt32 name 'CertAddEnhancedKeyUsageIdentifier';
function CertRemoveEnhancedKeyUsageIdentifier; external crypt32 name 'CertRemoveEnhancedKeyUsageIdentifier';
function CertGetValidUsages; external crypt32 name 'CertGetValidUsages';
function CryptMsgGetAndVerifySigner; external crypt32 name 'CryptMsgGetAndVerifySigner';
function CryptMsgSignCTL; external crypt32 name 'CryptMsgSignCTL';
function CryptMsgEncodeAndSignCTL; external crypt32 name 'CryptMsgEncodeAndSignCTL';
function CertFindSubjectInSortedCTL; external crypt32 name 'CertFindSubjectInSortedCTL';
function CertEnumSubjectInSortedCTL; external crypt32 name 'CertEnumSubjectInSortedCTL';
function CertVerifyCTLUsage; external crypt32 name 'CertVerifyCTLUsage';
function CertVerifyRevocation; external crypt32 name 'CertVerifyRevocation';
function CertCompareIntegerBlob; external crypt32 name 'CertCompareIntegerBlob';
function CertCompareCertificate; external crypt32 name 'CertCompareCertificate';
function CertCompareCertificateName; external crypt32 name 'CertCompareCertificateName';
function CertIsRDNAttrsInCertificateName; external crypt32 name 'CertIsRDNAttrsInCertificateName';
function CertComparePublicKeyInfo; external crypt32 name 'CertComparePublicKeyInfo';
function CertGetPublicKeyLength; external crypt32 name 'CertGetPublicKeyLength';
function CryptVerifyCertificateSignature; external crypt32 name 'CryptVerifyCertificateSignature';
function CryptVerifyCertificateSignatureEx; external crypt32 name 'CryptVerifyCertificateSignatureEx';
function CryptHashToBeSigned; external crypt32 name 'CryptHashToBeSigned';
function CryptHashCertificate; external crypt32 name 'CryptHashCertificate';
function CryptSignCertificate; external crypt32 name 'CryptSignCertificate';
function CryptSignAndEncodeCertificate; external crypt32 name 'CryptSignAndEncodeCertificate';
function CertVerifyTimeValidity; external crypt32 name 'CertVerifyTimeValidity';
function CertVerifyCRLTimeValidity; external crypt32 name 'CertVerifyCRLTimeValidity';
function CertVerifyValidityNesting; external crypt32 name 'CertVerifyValidityNesting';
function CertVerifyCRLRevocation; external crypt32 name 'CertVerifyCRLRevocation';
function CertAlgIdToOID; external crypt32 name 'CertAlgIdToOID';
function CertOIDToAlgId; external crypt32 name 'CertOIDToAlgId';
function CertFindExtension; external crypt32 name 'CertFindExtension';
function CertFindAttribute; external crypt32 name 'CertFindAttribute';
function CertFindRDNAttr; external crypt32 name 'CertFindRDNAttr';
function CertGetIntendedKeyUsage; external crypt32 name 'CertGetIntendedKeyUsage';
function CryptInstallDefaultContext; external crypt32 name 'CryptInstallDefaultContext';
function CryptUninstallDefaultContext; external crypt32 name 'CryptUninstallDefaultContext';
function CryptExportPublicKeyInfo; external crypt32 name 'CryptExportPublicKeyInfo';
function CryptExportPublicKeyInfoEx; external crypt32 name 'CryptExportPublicKeyInfoEx';
function CryptImportPublicKeyInfo; external crypt32 name 'CryptImportPublicKeyInfo';
function CryptImportPublicKeyInfoEx; external crypt32 name 'CryptImportPublicKeyInfoEx';
function CryptAcquireCertificatePrivateKey; external crypt32 name 'CryptAcquireCertificatePrivateKey';
function CryptFindCertificateKeyProvInfo; external crypt32 name 'CryptFindCertificateKeyProvInfo';
function CryptImportPKCS8; external crypt32 name 'CryptImportPKCS8';
function CryptExportPKCS8; external crypt32 name 'CryptExportPKCS8';
function CryptExportPKCS8Ex; external crypt32 name 'CryptExportPKCS8Ex';
function CryptHashPublicKeyInfo; external crypt32 name 'CryptHashPublicKeyInfo';
function CertRDNValueToStrA; external crypt32 name 'CertRDNValueToStrA';
function CertRDNValueToStrW; external crypt32 name 'CertRDNValueToStrW';
function CertRDNValueToStr; external crypt32 name 'CertRDNValueToStr' + AWSuffix;
function CertNameToStrA; external crypt32 name 'CertNameToStrA';
function CertNameToStrW; external crypt32 name 'CertNameToStrW';
function CertNameToStr; external crypt32 name 'CertNameToStr' + AWSuffix;
function CertStrToNameA; external crypt32 name 'CertStrToNameA';
function CertStrToNameW; external crypt32 name 'CertStrToNameW';
function CertStrToName; external crypt32 name 'CertStrToName' + AWSuffix;
function CertGetNameStringA; external crypt32 name 'CertGetNameStringA';
function CertGetNameStringW; external crypt32 name 'CertGetNameStringW';
function CertGetNameString; external crypt32 name 'CertGetNameString' + AWSuffix;
function CryptSignMessage; external crypt32 name 'CryptSignMessage';
function CryptVerifyMessageSignature; external crypt32 name 'CryptVerifyMessageSignature';
function CryptGetMessageSignerCount; external crypt32 name 'CryptGetMessageSignerCount';
function CryptGetMessageCertificates; external crypt32 name 'CryptGetMessageCertificates';
function CryptVerifyDetachedMessageSignature; external crypt32 name 'CryptVerifyDetachedMessageSignature';
function CryptEncryptMessage; external crypt32 name 'CryptEncryptMessage';
function CryptDecryptMessage; external crypt32 name 'CryptDecryptMessage';
function CryptSignAndEncryptMessage; external crypt32 name 'CryptSignAndEncryptMessage';
function CryptDecryptAndVerifyMessageSignature; external crypt32 name 'CryptDecryptAndVerifyMessageSignature';
function CryptDecodeMessage; external crypt32 name 'CryptDecodeMessage';
function CryptHashMessage; external crypt32 name 'CryptHashMessage';
function CryptVerifyMessageHash; external crypt32 name 'CryptVerifyMessageHash';
function CryptVerifyDetachedMessageHash; external crypt32 name 'CryptVerifyDetachedMessageHash';
function CryptSignMessageWithKey; external crypt32 name 'CryptSignMessageWithKey';
function CryptVerifyMessageSignatureWithKey; external crypt32 name 'CryptVerifyMessageSignatureWithKey';
function CertOpenSystemStoreA; external crypt32 name 'CertOpenSystemStoreA';
function CertOpenSystemStoreW; external crypt32 name 'CertOpenSystemStoreW';
function CertOpenSystemStore; external crypt32 name 'CertOpenSystemStore' + AWSuffix;
function CertAddEncodedCertificateToSystemStoreA; external crypt32 name 'CertAddEncodedCertificateToSystemStoreA';
function CertAddEncodedCertificateToSystemStoreW; external crypt32 name 'CertAddEncodedCertificateToSystemStoreW';
function CertAddEncodedCertificateToSystemStore; external crypt32 name 'CertAddEncodedCertificateToSystemStore' + AWSuffix;
function FindCertsByIssuer; external softpub name 'FindCertsByIssuer';
function CryptQueryObject; external crypt32 name 'CryptQueryObject';
function CryptMemAlloc; external crypt32 name 'CryptMemAlloc';
function CryptMemRealloc; external crypt32 name 'CryptMemRealloc';
procedure CryptMemFree; external crypt32 name 'CryptMemFree';
function CryptCreateAsyncHandle; external crypt32 name 'CryptCreateAsyncHandle';
function CryptSetAsyncParam; external crypt32 name 'CryptSetAsyncParam';
function CryptGetAsyncParam; external crypt32 name 'CryptGetAsyncParam';
function CryptCloseAsyncHandle; external crypt32 name 'CryptCloseAsyncHandle';
function CryptRetrieveObjectByUrlA; external cryptnet name 'CryptRetrieveObjectByUrlA';
function CryptRetrieveObjectByUrlW; external cryptnet name 'CryptRetrieveObjectByUrlW';
function CryptRetrieveObjectByUrl; external cryptnet name 'CryptRetrieveObjectByUrl' + AWSuffix;
function CryptInstallCancelRetrieval; external cryptnet name 'CryptInstallCancelRetrieval';
function CryptUninstallCancelRetrieval; external cryptnet name 'CryptUninstallCancelRetrieval';
function CryptCancelAsyncRetrieval; external cryptnet name 'CryptCancelAsyncRetrieval';
function CryptGetObjectUrl; external cryptnet name 'CryptGetObjectUrl';
function CryptGetTimeValidObject; external cryptnet name 'CryptGetTimeValidObject';
function CryptFlushTimeValidObject; external cryptnet name 'CryptFlushTimeValidObject';
function CryptProtectData; external crypt32 name 'CryptProtectData';
function CryptUnprotectData; external crypt32 name 'CryptUnprotectData';
function CertCreateSelfSignCertificate; external crypt32 name 'CertCreateSelfSignCertificate';
function CryptGetKeyIdentifierProperty; external crypt32 name 'CryptGetKeyIdentifierProperty';
function CryptSetKeyIdentifierProperty; external crypt32 name 'CryptSetKeyIdentifierProperty';
function CryptEnumKeyIdentifierProperties; external crypt32 name 'CryptEnumKeyIdentifierProperties';
function CryptCreateKeyIdentifierFromCSP; external crypt32 name 'CryptCreateKeyIdentifierFromCSP';
function CertCreateCertificateChainEngine; external crypt32 name 'CertCreateCertificateChainEngine';
procedure CertFreeCertificateChainEngine; external crypt32 name 'CertFreeCertificateChainEngine';
function CertResyncCertificateChainEngine; external crypt32 name 'CertResyncCertificateChainEngine';
function CertGetCertificateChain; external crypt32 name 'CertGetCertificateChain';
procedure CertFreeCertificateChain; external crypt32 name 'CertFreeCertificateChain';
function CertDuplicateCertificateChain; external crypt32 name 'CertDuplicateCertificateChain';
function CertFindChainInStore; external crypt32 name 'CertFindChainInStore';
function CertVerifyCertificateChainPolicy; external crypt32 name 'CertVerifyCertificateChainPolicy';
function CryptBinaryToStringA; external crypt32 name 'CryptBinaryToStringA';
function CryptBinaryToStringW; external crypt32 name 'CryptBinaryToStringW';
function CryptBinaryToString; external crypt32 name 'CryptBinaryToString' + AWSuffix;
function CryptStringToBinaryA; external crypt32 name 'CryptToStringBinaryA';
function CryptStringToBinaryW; external crypt32 name 'CryptToStringBinaryW';
function CryptStringToBinary; external crypt32 name 'CryptToStringBinary' + AWSuffix;
{$ENDIF DYNAMIC_LINK}
{$ENDIF JWA_INTERFACESECTION}
{$IFNDEF JWA_OMIT_SECTIONS}
end.
{$ENDIF JWA_OMIT_SECTIONS}