'V©ÔX_i"C“q¹w# overlays fixup script
# implements (or rather substitutes) overlay arguments functionality
# using u-boot scripting, environment variables and "fdt" command

# setexpr test_var ${tmp_bank} - A
# works only for hex numbers (A-F)

setenv decompose_pin 'setexpr tmp_bank sub "P(A|C|D|G)\\d+" "\\1";
setexpr tmp_pin sub "P\\S(\\d+)" "\\1";
test "${tmp_bank}" = "A" && setenv tmp_bank 0;
test "${tmp_bank}" = "C" && setenv tmp_bank 2;
test "${tmp_bank}" = "D" && setenv tmp_bank 3;
test "${tmp_bank}" = "G" && setenv tmp_bank 6'

if test -n "${param_spinor_spi_bus}"; then
	test "${param_spinor_spi_bus}" = "0" && setenv tmp_spi_path "spi@5010000"
	test "${param_spinor_spi_bus}" = "1" && setenv tmp_spi_path "spi@5011000"
	fdt set /soc/${tmp_spi_path} status "okay"
	fdt set /soc/${tmp_spi_path}/spiflash@0 status "okay"
	if test -n "${param_spinor_max_freq}"; then
		fdt set /soc/${tmp_spi_path}/spiflash@0 spi-max-frequency "<${param_spinor_max_freq}>"
	fi
	if test "${param_spinor_spi_cs}" = "1"; then
		fdt set /soc/${tmp_spi_path}/spiflash@0 reg "<1>"
	fi
	env delete tmp_spi_path
fi

if test -n "${param_spidev_spi_bus}"; then
	test "${param_spidev_spi_bus}" = "0" && setenv tmp_spi_path "spi@5010000"
	test "${param_spidev_spi_bus}" = "1" && setenv tmp_spi_path "spi@5011000"
	fdt set /soc/${tmp_spi_path} status "okay"
	fdt set /soc/${tmp_spi_path}/spidev status "okay"
	if test -n "${param_spidev_max_freq}"; then
		fdt set /soc/${tmp_spi_path}/spidev spi-max-frequency "<${param_spidev_max_freq}>"
	fi
	if test "${param_spidev_spi_cs}" = "1"; then
		fdt set /soc/${tmp_spi_path}/spidev reg "<1>"
	fi
	env delete tmp_spi_path
fi

if test -n "${param_pps_pin}"; then
	setenv tmp_bank "${param_pps_pin}"
	setenv tmp_pin "${param_pps_pin}"
	run decompose_pin
	fdt set /soc/pinctrl@300b000/pps_pins pins "${param_pps_pin}"
	fdt get value tmp_phandle /soc/pinctrl@300b000 phandle
	fdt set /pps@0 gpios "<${tmp_phandle} ${tmp_bank} ${tmp_pin} 0>"
	env delete tmp_pin tmp_bank tmp_phandle
fi

if test "${param_pps_falling_edge}" = "1"; then
	fdt set /pps@0 assert-falling-edge
fi

for f in ${overlays}; do
	if test "${f}" = "pwm"; then
		setenv bootargs_new ""
		for arg in ${bootargs}; do
			if test "${arg}" = "console=ttyS0,115200"; then
				echo "Warning: Disabling ttyS0 console due to enabled PWM overlay"
			else
				setenv bootargs_new "${bootargs_new} ${arg}"
			fi
		done
		setenv bootargs "${bootargs_new}"
	fi
done

if test -n "${param_w1_pin}"; then
	setenv tmp_bank "${param_w1_pin}"
	setenv tmp_pin "${param_w1_pin}"
	run decompose_pin
	fdt set /soc/pinctrl@300b000/w1_pins pins "${param_w1_pin}"
	fdt get value tmp_phandle /soc/pinctrl@300b000 phandle
	fdt set /onewire@0 gpios "<${tmp_phandle} ${tmp_bank} ${tmp_pin} 0>"
	env delete tmp_pin tmp_bank tmp_phandle
fi

if test "${param_w1_pin_int_pullup}" = "1"; then
	fdt set /soc/pinctrl@300b000/w1_pins bias-pull-up
fi

if test "${param_uart1_rtscts}" = "1"; then
	fdt get value tmp_phandle1 /soc/pinctrl@300b000/uart1-pins phandle
	fdt get value tmp_phandle2 /soc/pinctrl@300b000/uart1-rts-cts-pins phandle
	fdt set /soc/serial@5000400 pinctrl-names "default" "default"
	fdt set /soc/serial@5000400 pinctrl-0 "<${tmp_phandle1}>"
	fdt set /soc/serial@5000400 pinctrl-1 "<${tmp_phandle2}>"
	env delete tmp_phandle1 tmp_phandle2
fi

if test "${param_uart2_rtscts}" = "1"; then
	fdt get value tmp_phandle1 /soc/pinctrl@300b000/uart2-pins phandle
	fdt get value tmp_phandle2 /soc/pinctrl@300b000/uart2-rts-cts-pins phandle
	fdt set /soc/serial@5000800 pinctrl-names "default" "default"
	fdt set /soc/serial@5000800 pinctrl-0 "<${tmp_phandle1}>"
	fdt set /soc/serial@5000800 pinctrl-1 "<${tmp_phandle2}>"
	env delete tmp_phandle1 tmp_phandle2
fi

if test "${param_uart3_rtscts}" = "1"; then
	fdt get value tmp_phandle1 /soc/pinctrl@300b000/uart3-pins phandle
	fdt get value tmp_phandle2 /soc/pinctrl@300b000/uart3-rts-cts-pins phandle
	fdt set /soc/serial@5000c00 pinctrl-names "default" "default"
	fdt set /soc/serial@5000c00 pinctrl-0 "<${tmp_phandle1}>"
	fdt set /soc/serial@5000c00 pinctrl-1 "<${tmp_phandle2}>"
	env delete tmp_phandle1 tmp_phandle2
fi