# -*- coding: utf-8 -*-
import base64
from copy import copy
import logging
import mimetypes
import os.path
import re
import shutil
import string
import sys
import tempfile

import reportlab
from reportlab.lib.colors import Color, toColor
from reportlab.lib.enums import TA_LEFT, TA_CENTER, TA_RIGHT, TA_JUSTIFY
from reportlab.lib.units import inch, cm
import six


try:
    import httplib
except ImportError:
    import http.client as httplib

try:
    import urllib.request as urllib2
except ImportError:
    import urllib2

try:
    import urllib.parse as urlparse
except ImportError:
    import urlparse

try:
    from urllib.parse import unquote as urllib_unquote
except ImportError:
    from urllib import unquote as urllib_unquote

# Copyright 2010 Dirk Holtwick, holtwick.it
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

rgb_re = re.compile(
    "^.*?rgb[a]?[(]([0-9]+).*?([0-9]+).*?([0-9]+)(?:.*?(?:[01]\.(?:[0-9]+)))?[)].*?[ ]*$")

_reportlab_version = tuple(map(int, reportlab.Version.split('.')))
if _reportlab_version < (2, 1):
    raise ImportError("Reportlab Version 2.1+ is needed!")

log = logging.getLogger("xhtml2pdf")

try:
    import PyPDF2
except ImportError:
    PyPDF2 = None

try:
    from reportlab.graphics import renderPM
except ImportError:
    renderPM = None

try:
    from reportlab.graphics import renderSVG
except ImportError:
    renderSVG = None

from xhtml2pdf.config.httpconfig import httpConfig
#=========================================================================
# Memoize decorator
#=========================================================================


class memoized(object):

    """
    A kwargs-aware memoizer, better than the one in python :)

    Don't pass in too large kwargs, since this turns them into a tuple of
    tuples. Also, avoid mutable types (as usual for memoizers)

    What this does is to create a dictionnary of {(*parameters):return value},
    and uses it as a cache for subsequent calls to the same method.
    It is especially useful for functions that don't rely on external variables
    and that are called often. It's a perfect match for our getSize etc...
    """

    def __init__(self, func):
        self.cache = {}
        self.func = func
        self.__doc__ = self.func.__doc__  # To avoid great confusion
        self.__name__ = self.func.__name__  # This also avoids great confusion

    def __call__(self, *args, **kwargs):
        # Make sure the following line is not actually slower than what you're
        # trying to memoize
        args_plus = tuple(six.iteritems(kwargs))
        key = (args, args_plus)
        try:
            if key not in self.cache:
                res = self.func(*args, **kwargs)
                self.cache[key] = res
            return self.cache[key]
        except TypeError:
            # happens if any of the parameters is a list
            return self.func(*args, **kwargs)


def ErrorMsg():
    """
    Helper to get a nice traceback as string
    """
    import traceback

    limit = None
    _type, value, tb = sys.exc_info()
    _list = traceback.format_tb(tb, limit) + \
        traceback.format_exception_only(_type, value)
    return "Traceback (innermost last):\n" + "%-20s %s" % (
        " ".join(_list[:-1]),
        _list[-1])


def toList(value):
    if type(value) not in (list, tuple):
        return [value]
    return list(value)


def transform_attrs(obj, keys, container, func, extras=None):
    """
    Allows to apply one function to set of keys cheching if key is in container,
    also trasform ccs key to report lab keys.

    extras = Are extra params for func, it will be call like func(*[param1, param2])

    obj = frag
    keys = [(reportlab, css), ... ]
    container = cssAttr
    """
    cpextras = extras

    for reportlab, css in keys:
        extras = cpextras
        if extras is None:
            extras = []
        elif not isinstance(extras, list):
            extras = [extras]
        if css in container:
            extras.insert(0, container[css])
            setattr(obj,
                    reportlab,
                    func(*extras)
                    )


def copy_attrs(obj1, obj2, attrs):
    """
    Allows copy a list of attributes from object2 to object1.
    Useful for copy ccs attributes to fragment
    """
    for attr in attrs:
        value = getattr(obj2, attr) if hasattr(obj2, attr) else None
        if value is None and isinstance(obj2, dict) and attr in obj2:
            value = obj2[attr]
        setattr(obj1, attr, value)


def set_value(obj, attrs, value, _copy=False):
    """
    Allows set the same value to a list of attributes
    """
    for attr in attrs:
        if _copy:
            value = copy(value)
        setattr(obj, attr, value)


@memoized
def getColor(value, default=None):
    """
    Convert to color value.
    This returns a Color object instance from a text bit.
    """

    if isinstance(value, Color):
        return value
    value = str(value).strip().lower()
    if value == "transparent" or value == "none":
        return default
    if value in COLOR_BY_NAME:
        return COLOR_BY_NAME[value]
    if value.startswith("#") and len(value) == 4:
        value = "#" + value[1] + value[1] + \
            value[2] + value[2] + value[3] + value[3]
    elif rgb_re.search(value):
        # e.g., value = "<css function: rgb(153, 51, 153)>", go figure:
        r, g, b = [int(x) for x in rgb_re.search(value).groups()]
        value = "#%02x%02x%02x" % (r, g, b)
    else:
        # Shrug
        pass

    return toColor(value, default)  # Calling the reportlab function


def getBorderStyle(value, default=None):
    if value and (str(value).lower() not in ("none", "hidden")):
        return value
    return default


mm = cm / 10.0
dpi96 = (1.0 / 96.0 * inch)

_absoluteSizeTable = {
    "1": 50.0 / 100.0,
    "xx-small": 50.0 / 100.0,
    "x-small": 50.0 / 100.0,
    "2": 75.0 / 100.0,
    "small": 75.0 / 100.0,
    "3": 100.0 / 100.0,
    "medium": 100.0 / 100.0,
    "4": 125.0 / 100.0,
    "large": 125.0 / 100.0,
    "5": 150.0 / 100.0,
    "x-large": 150.0 / 100.0,
    "6": 175.0 / 100.0,
    "xx-large": 175.0 / 100.0,
    "7": 200.0 / 100.0,
    "xxx-large": 200.0 / 100.0,
}

_relativeSizeTable = {
    "larger": 1.25,
    "smaller": 0.75,
    "+4": 200.0 / 100.0,
    "+3": 175.0 / 100.0,
    "+2": 150.0 / 100.0,
    "+1": 125.0 / 100.0,
    "-1": 75.0 / 100.0,
    "-2": 50.0 / 100.0,
    "-3": 25.0 / 100.0,
}

MIN_FONT_SIZE = 1.0


@memoized
def getSize(value, relative=0, base=None, default=0.0):
    """
    Converts strings to standard sizes.
    That is the function taking a string of CSS size ('12pt', '1cm' and so on)
    and converts it into a float in a standard unit (in our case, points).

    >>> getSize('12pt')
    12.0
    >>> getSize('1cm')
    28.346456692913385
    """
    try:
        original = value
        if value is None:
            return relative
        elif type(value) is float:
            return value
        elif isinstance(value, int):
            return float(value)
        elif type(value) in (tuple, list):
            value = "".join(value)
        value = str(value).strip().lower().replace(",", ".")
        if value[-2:] == 'cm':
            return float(value[:-2].strip()) * cm
        elif value[-2:] == 'mm':
            return float(value[:-2].strip()) * mm  # 1mm = 0.1cm
        elif value[-2:] == 'in':
            return float(value[:-2].strip()) * inch  # 1pt == 1/72inch
        elif value[-2:] == 'inch':
            return float(value[:-4].strip()) * inch  # 1pt == 1/72inch
        elif value[-2:] == 'pt':
            return float(value[:-2].strip())
        elif value[-2:] == 'pc':
            return float(value[:-2].strip()) * 12.0  # 1pc == 12pt
        elif value[-2:] == 'px':
            # XXX W3C says, use 96pdi
            # http://www.w3.org/TR/CSS21/syndata.html#length-units
            return float(value[:-2].strip()) * dpi96
        elif value[-1:] == 'i':  # 1pt == 1/72inch
            return float(value[:-1].strip()) * inch
        elif value in ("none", "0", "auto"):
            return 0.0
        elif relative:
            if value[-3:] == 'rem':  # XXX
                # 1rem = 1 * fontSize
                return float(value[:-3].strip()) * relative
            elif value[-2:] == 'em':  # XXX
                # 1em = 1 * fontSize
                return float(value[:-2].strip()) * relative
            elif value[-2:] == 'ex':  # XXX
                # 1ex = 1/2 fontSize
                return float(value[:-2].strip()) * (relative / 2.0)
            elif value[-1:] == '%':
                # 1% = (fontSize * 1) / 100
                return (relative * float(value[:-1].strip())) / 100.0
            elif value in ("normal", "inherit"):
                return relative
            elif value in _relativeSizeTable:
                if base:
                    return max(MIN_FONT_SIZE, base * _relativeSizeTable[value])
                return max(MIN_FONT_SIZE, relative * _relativeSizeTable[value])
            elif value in _absoluteSizeTable:
                if base:
                    return max(MIN_FONT_SIZE, base * _absoluteSizeTable[value])
                return max(MIN_FONT_SIZE, relative * _absoluteSizeTable[value])
            else:
                return max(MIN_FONT_SIZE, relative * float(value))
        try:
            value = float(value)
        except ValueError:
            log.warn("getSize: Not a float %r", value)
            return default  # value = 0
        return max(0, value)
    except Exception:
        log.warn("getSize %r %r", original, relative, exc_info=1)
        return default


@memoized
def getCoords(x, y, w, h, pagesize):
    """
    As a stupid programmer I like to use the upper left
    corner of the document as the 0,0 coords therefore
    we need to do some fancy calculations
    """
    #~ print pagesize
    ax, ay = pagesize
    if x < 0:
        x = ax + x
    if y < 0:
        y = ay + y
    if w is not None and h is not None:
        if w <= 0:
            w = (ax - x + w)
        if h <= 0:
            h = (ay - y + h)
        return x, (ay - y - h), w, h
    return x, (ay - y)


@memoized
def getBox(box, pagesize):
    """
    Parse sizes by corners in the form:
    <X-Left> <Y-Upper> <Width> <Height>
    The last to values with negative values are interpreted as offsets form
    the right and lower border.
    """
    box = str(box).split()
    if len(box) != 4:
        raise Exception("box not defined right way")
    x, y, w, h = [getSize(pos) for pos in box]
    return getCoords(x, y, w, h, pagesize)


def getFrameDimensions(data, page_width, page_height):
    """Calculate dimensions of a frame

    Returns left, top, width and height of the frame in points.
    """
    box = data.get("-pdf-frame-box", [])
    if len(box) == 4:
        return [getSize(x) for x in box]
    top = getSize(data.get("top", 0))
    left = getSize(data.get("left", 0))
    bottom = getSize(data.get("bottom", 0))
    right = getSize(data.get("right", 0))
    if "height" in data:
        height = getSize(data["height"])
        if "top" in data:
            top = getSize(data["top"])
            bottom = page_height - (top + height)
        elif "bottom" in data:
            bottom = getSize(data["bottom"])
            top = page_height - (bottom + height)
    if "width" in data:
        width = getSize(data["width"])
        if "left" in data:
            left = getSize(data["left"])
            right = page_width - (left + width)
        elif "right" in data:
            right = getSize(data["right"])
            left = page_width - (right + width)
    top += getSize(data.get("margin-top", 0))
    left += getSize(data.get("margin-left", 0))
    bottom += getSize(data.get("margin-bottom", 0))
    right += getSize(data.get("margin-right", 0))

    width = page_width - (left + right)
    height = page_height - (top + bottom)
    return left, top, width, height


@memoized
def getPos(position, pagesize):
    """
    Pair of coordinates
    """
    position = str(position).split()
    if len(position) != 2:
        raise Exception("position not defined right way")
    x, y = [getSize(pos) for pos in position]
    return getCoords(x, y, None, None, pagesize)


def getBool(s):
    " Is it a boolean? "
    return str(s).lower() in ("y", "yes", "1", "true")


_uid = 0


def getUID():
    " Unique ID "
    global _uid
    _uid += 1
    return str(_uid)


_alignments = {
    "left": TA_LEFT,
    "center": TA_CENTER,
    "middle": TA_CENTER,
    "right": TA_RIGHT,
    "justify": TA_JUSTIFY,
}


def getAlign(value, default=TA_LEFT):
    return _alignments.get(str(value).lower(), default)

GAE = "google.appengine" in sys.modules

if GAE:
    STRATEGIES = (
        six.BytesIO,
        six.BytesIO)
else:
    STRATEGIES = (
        six.BytesIO,
        tempfile.NamedTemporaryFile)


class pisaTempFile(object):

    """
    A temporary file implementation that uses memory unless
    either capacity is breached or fileno is requested, at which
    point a real temporary file will be created and the relevant
    details returned

    If capacity is -1 the second strategy will never be used.

    Inspired by:
    http://code.activestate.com/recipes/496744/
    """

    STRATEGIES = STRATEGIES

    CAPACITY = 10 * 1024

    def __init__(self, buffer="", capacity=CAPACITY):
        """Creates a TempFile object containing the specified buffer.
        If capacity is specified, we use a real temporary file once the
        file gets larger than that size.  Otherwise, the data is stored
        in memory.
        """

        self.capacity = capacity
        self.strategy = int(len(buffer) > self.capacity)
        try:
            self._delegate = self.STRATEGIES[self.strategy]()
        except IndexError:
            # Fallback for Google AppEnginge etc.
            self._delegate = self.STRATEGIES[0]()
        self.write(buffer)
        # we must set the file's position for preparing to read
        self.seek(0)

    def makeTempFile(self):
        """
        Switch to next startegy. If an error occured,
        stay with the first strategy
        """

        if self.strategy == 0:
            try:
                new_delegate = self.STRATEGIES[1]()
                new_delegate.write(self.getvalue())
                self._delegate = new_delegate
                self.strategy = 1
                log.warn("Created temporary file %s", self.name)
            except:
                self.capacity = - 1

    def getFileName(self):
        """
        Get a named temporary file
        """

        self.makeTempFile()
        return self.name

    def fileno(self):
        """
        Forces this buffer to use a temporary file as the underlying.
        object and returns the fileno associated with it.
        """
        self.makeTempFile()
        return self._delegate.fileno()

    def getvalue(self):
        """
        Get value of file. Work around for second strategy.
        Always returns bytes
        """

        if self.strategy == 0:
            return self._delegate.getvalue()
        self._delegate.flush()
        self._delegate.seek(0)
        value = self._delegate.read()
        if not isinstance(value, six.binary_type):
            value = value.encode('utf-8')
        return value

    def write(self, value):
        """
        If capacity != -1 and length of file > capacity it is time to switch
        """

        if self.capacity > 0 and self.strategy == 0:
            len_value = len(value)
            if len_value >= self.capacity:
                needs_new_strategy = True
            else:
                self.seek(0, 2)  # find end of file
                needs_new_strategy = \
                    (self.tell() + len_value) >= self.capacity
            if needs_new_strategy:
                self.makeTempFile()

        if not isinstance(value, six.binary_type):
            value = value.encode('utf-8')

        self._delegate.write(value)

    def __getattr__(self, name):
        try:
            return getattr(self._delegate, name)
        except AttributeError:
            # hide the delegation
            e = "object '%s' has no attribute '%s'" \
                % (self.__class__.__name__, name)
            raise AttributeError(e)


_rx_datauri = re.compile(
    "^data:(?P<mime>[a-z]+/[a-z]+);base64,(?P<data>.*)$", re.M | re.DOTALL)


class pisaFileObject:

    """
    XXX
    """

    def __init__(self, uri, basepath=None):

        self.basepath = basepath
        self.mimetype = None
        self.file = None
        self.data = None
        self.uri = None
        self.local = None
        self.tmp_file = None
        uri = uri or str()
        if not isinstance(uri, str):
            uri = uri.decode("utf-8")
        log.debug("FileObject %r, Basepath: %r", uri, basepath)

        # Data URI
        if uri.startswith("data:"):
            m = _rx_datauri.match(uri)
            self.mimetype = m.group("mime")

            b64 = urllib_unquote(m.group("data"))

            # The data may be incorrectly unescaped... repairs needed
            b64 = b64.strip("b'").strip("'").encode()
            b64 = re.sub(b"\\n", b'', b64)
            b64 = re.sub(b'[^A-Za-z0-9\+\/]+', b'', b64)

            # Add padding as needed, to make length into a multiple of 4
            #
            b64 += b"=" * ((4 - len(b64) % 4) % 4)

            self.data = base64.b64decode(b64)

        else:
            # Check if we have an external scheme
            if basepath and not urlparse.urlparse(uri).scheme:
                urlParts = urlparse.urlparse(basepath)
            else:
                urlParts = urlparse.urlparse(uri)

            log.debug("URLParts: {}".format((urlParts, urlParts.scheme)))

            if urlParts.scheme == 'file':
                if basepath and uri.startswith('/'):
                    uri = urlparse.urljoin(basepath, uri[1:])
                urlResponse = urllib2.urlopen(uri)
                self.mimetype = urlResponse.info().get(
                    "Content-Type", '').split(";")[0]
                self.uri = urlResponse.geturl()
                self.file = urlResponse

            # Drive letters have len==1 but we are looking
            # for things like http:
            elif urlParts.scheme in ('http', 'https'):

                log.debug("Sending request for {} with httplib".format(uri))

                # External data
                if basepath:
                    uri = urlparse.urljoin(basepath, uri)

                log.debug("Uri parsed: {}".format(uri))

                #path = urlparse.urlsplit(url)[2]
                #mimetype = getMimeType(path)

                # Using HTTPLIB
                url_splitted = urlparse.urlsplit(uri)
                server = url_splitted[1]
                path = url_splitted[2]
                path += "?" + url_splitted[3] if url_splitted[3] else ""
                if uri.startswith("https://"):
                    conn = httplib.HTTPSConnection(server,  **httpConfig)
                else:
                    conn = httplib.HTTPConnection(server)
                conn.request("GET", path)
                r1 = conn.getresponse()
                # log.debug("HTTP %r %r %r %r", server, path, uri, r1)
                if (r1.status, r1.reason) == (200, "OK"):
                    self.mimetype = r1.getheader(
                        "Content-Type", '').split(";")[0]
                    self.uri = uri
                    log.debug("here")
                    if r1.getheader("content-encoding") == "gzip":
                        import gzip

                        self.file = gzip.GzipFile(
                            mode="rb", fileobj=six.BytesIO(r1.read()))
                    else:
                        self.file = pisaTempFile(r1.read())
                else:
                    log.debug(
                        "Received non-200 status: {}".format((r1.status, r1.reason)))
                    try:
                        urlResponse = urllib2.urlopen(uri)
                    except urllib2.HTTPError as e:
                        log.error("Could not process uri: {}".format(e))
                        return
                    self.mimetype = urlResponse.info().get(
                        "Content-Type", '').split(";")[0]
                    self.uri = urlResponse.geturl()
                    self.file = urlResponse

            else:

                log.debug("Unrecognized scheme, assuming local file path")

                # Local data
                if basepath:
                    if sys.platform == 'win32' and os.path.isfile(basepath):
                        basepath = os.path.dirname(basepath)
                    uri = os.path.normpath(os.path.join(basepath, uri))

                if os.path.isfile(uri):
                    self.uri = uri
                    self.local = uri

                    self.setMimeTypeByName(uri)
                    if self.mimetype and self.mimetype.startswith('text'):
                        self.file = open(uri, "r") #removed bytes... lets hope it goes ok :/
                    else:
                        # removed bytes... lets hope it goes ok :/
                        self.file = open(uri, "rb")

    def getFile(self):
        if self.file is not None:
            return self.file
        if self.data is not None:
            return pisaTempFile(self.data)
        return None

    def getNamedFile(self):
        if self.notFound():
            return None
        if self.local:
            return str(self.local)
        if not self.tmp_file:
            self.tmp_file = tempfile.NamedTemporaryFile()
            if self.file:
                shutil.copyfileobj(self.file, self.tmp_file)
            else:
                self.tmp_file.write(self.getData())
            self.tmp_file.flush()
        return self.tmp_file.name

    def getData(self):
        if self.data is not None:
            return self.data
        if self.file is not None:
            try:
                self.data = self.file.read()
            except:
                if self.mimetype and self.mimetype.startswith('text'):
                    self.file = open(self.file.name, "rb") #removed bytes... lets hope it goes ok :/
                    self.data = self.file.read().decode('utf-8')
                else:
                    raise
            return self.data
        return None

    def notFound(self):
        return (self.file is None) and (self.data is None)

    def setMimeTypeByName(self, name):
        " Guess the mime type "
        mimetype = mimetypes.guess_type(name)[0]
        if mimetype is not None:
            self.mimetype = mimetypes.guess_type(name)[0].split(";")[0]


def getFile(*a, **kw):
    file = pisaFileObject(*a, **kw)
    if file.notFound():
        return None
    return file


COLOR_BY_NAME = {
    'activeborder': Color(212, 208, 200),
    'activecaption': Color(10, 36, 106),
    'aliceblue': Color(.941176, .972549, 1),
    'antiquewhite': Color(.980392, .921569, .843137),
    'appworkspace': Color(128, 128, 128),
    'aqua': Color(0, 1, 1),
    'aquamarine': Color(.498039, 1, .831373),
    'azure': Color(.941176, 1, 1),
    'background': Color(58, 110, 165),
    'beige': Color(.960784, .960784, .862745),
    'bisque': Color(1, .894118, .768627),
    'black': Color(0, 0, 0),
    'blanchedalmond': Color(1, .921569, .803922),
    'blue': Color(0, 0, 1),
    'blueviolet': Color(.541176, .168627, .886275),
    'brown': Color(.647059, .164706, .164706),
    'burlywood': Color(.870588, .721569, .529412),
    'buttonface': Color(212, 208, 200),
    'buttonhighlight': Color(255, 255, 255),
    'buttonshadow': Color(128, 128, 128),
    'buttontext': Color(0, 0, 0),
    'cadetblue': Color(.372549, .619608, .627451),
    'captiontext': Color(255, 255, 255),
    'chartreuse': Color(.498039, 1, 0),
    'chocolate': Color(.823529, .411765, .117647),
    'coral': Color(1, .498039, .313725),
    'cornflowerblue': Color(.392157, .584314, .929412),
    'cornsilk': Color(1, .972549, .862745),
    'crimson': Color(.862745, .078431, .235294),
    'cyan': Color(0, 1, 1),
    'darkblue': Color(0, 0, .545098),
    'darkcyan': Color(0, .545098, .545098),
    'darkgoldenrod': Color(.721569, .52549, .043137),
    'darkgray': Color(.662745, .662745, .662745),
    'darkgreen': Color(0, .392157, 0),
    'darkgrey': Color(.662745, .662745, .662745),
    'darkkhaki': Color(.741176, .717647, .419608),
    'darkmagenta': Color(.545098, 0, .545098),
    'darkolivegreen': Color(.333333, .419608, .184314),
    'darkorange': Color(1, .54902, 0),
    'darkorchid': Color(.6, .196078, .8),
    'darkred': Color(.545098, 0, 0),
    'darksalmon': Color(.913725, .588235, .478431),
    'darkseagreen': Color(.560784, .737255, .560784),
    'darkslateblue': Color(.282353, .239216, .545098),
    'darkslategray': Color(.184314, .309804, .309804),
    'darkslategrey': Color(.184314, .309804, .309804),
    'darkturquoise': Color(0, .807843, .819608),
    'darkviolet': Color(.580392, 0, .827451),
    'deeppink': Color(1, .078431, .576471),
    'deepskyblue': Color(0, .74902, 1),
    'dimgray': Color(.411765, .411765, .411765),
    'dimgrey': Color(.411765, .411765, .411765),
    'dodgerblue': Color(.117647, .564706, 1),
    'firebrick': Color(.698039, .133333, .133333),
    'floralwhite': Color(1, .980392, .941176),
    'forestgreen': Color(.133333, .545098, .133333),
    'fuchsia': Color(1, 0, 1),
    'gainsboro': Color(.862745, .862745, .862745),
    'ghostwhite': Color(.972549, .972549, 1),
    'gold': Color(1, .843137, 0),
    'goldenrod': Color(.854902, .647059, .12549),
    'gray': Color(.501961, .501961, .501961),
    'graytext': Color(128, 128, 128),
    'green': Color(0, .501961, 0),
    'greenyellow': Color(.678431, 1, .184314),
    'grey': Color(.501961, .501961, .501961),
    'highlight': Color(10, 36, 106),
    'highlighttext': Color(255, 255, 255),
    'honeydew': Color(.941176, 1, .941176),
    'hotpink': Color(1, .411765, .705882),
    'inactiveborder': Color(212, 208, 200),
    'inactivecaption': Color(128, 128, 128),
    'inactivecaptiontext': Color(212, 208, 200),
    'indianred': Color(.803922, .360784, .360784),
    'indigo': Color(.294118, 0, .509804),
    'infobackground': Color(255, 255, 225),
    'infotext': Color(0, 0, 0),
    'ivory': Color(1, 1, .941176),
    'khaki': Color(.941176, .901961, .54902),
    'lavender': Color(.901961, .901961, .980392),
    'lavenderblush': Color(1, .941176, .960784),
    'lawngreen': Color(.486275, .988235, 0),
    'lemonchiffon': Color(1, .980392, .803922),
    'lightblue': Color(.678431, .847059, .901961),
    'lightcoral': Color(.941176, .501961, .501961),
    'lightcyan': Color(.878431, 1, 1),
    'lightgoldenrodyellow': Color(.980392, .980392, .823529),
    'lightgray': Color(.827451, .827451, .827451),
    'lightgreen': Color(.564706, .933333, .564706),
    'lightgrey': Color(.827451, .827451, .827451),
    'lightpink': Color(1, .713725, .756863),
    'lightsalmon': Color(1, .627451, .478431),
    'lightseagreen': Color(.12549, .698039, .666667),
    'lightskyblue': Color(.529412, .807843, .980392),
    'lightslategray': Color(.466667, .533333, .6),
    'lightslategrey': Color(.466667, .533333, .6),
    'lightsteelblue': Color(.690196, .768627, .870588),
    'lightyellow': Color(1, 1, .878431),
    'lime': Color(0, 1, 0),
    'limegreen': Color(.196078, .803922, .196078),
    'linen': Color(.980392, .941176, .901961),
    'magenta': Color(1, 0, 1),
    'maroon': Color(.501961, 0, 0),
    'mediumaquamarine': Color(.4, .803922, .666667),
    'mediumblue': Color(0, 0, .803922),
    'mediumorchid': Color(.729412, .333333, .827451),
    'mediumpurple': Color(.576471, .439216, .858824),
    'mediumseagreen': Color(.235294, .701961, .443137),
    'mediumslateblue': Color(.482353, .407843, .933333),
    'mediumspringgreen': Color(0, .980392, .603922),
    'mediumturquoise': Color(.282353, .819608, .8),
    'mediumvioletred': Color(.780392, .082353, .521569),
    'menu': Color(212, 208, 200),
    'menutext': Color(0, 0, 0),
    'midnightblue': Color(.098039, .098039, .439216),
    'mintcream': Color(.960784, 1, .980392),
    'mistyrose': Color(1, .894118, .882353),
    'moccasin': Color(1, .894118, .709804),
    'navajowhite': Color(1, .870588, .678431),
    'navy': Color(0, 0, .501961),
    'oldlace': Color(.992157, .960784, .901961),
    'olive': Color(.501961, .501961, 0),
    'olivedrab': Color(.419608, .556863, .137255),
    'orange': Color(1, .647059, 0),
    'orangered': Color(1, .270588, 0),
    'orchid': Color(.854902, .439216, .839216),
    'palegoldenrod': Color(.933333, .909804, .666667),
    'palegreen': Color(.596078, .984314, .596078),
    'paleturquoise': Color(.686275, .933333, .933333),
    'palevioletred': Color(.858824, .439216, .576471),
    'papayawhip': Color(1, .937255, .835294),
    'peachpuff': Color(1, .854902, .72549),
    'peru': Color(.803922, .521569, .247059),
    'pink': Color(1, .752941, .796078),
    'plum': Color(.866667, .627451, .866667),
    'powderblue': Color(.690196, .878431, .901961),
    'purple': Color(.501961, 0, .501961),
    'red': Color(1, 0, 0),
    'rosybrown': Color(.737255, .560784, .560784),
    'royalblue': Color(.254902, .411765, .882353),
    'saddlebrown': Color(.545098, .270588, .07451),
    'salmon': Color(.980392, .501961, .447059),
    'sandybrown': Color(.956863, .643137, .376471),
    'scrollbar': Color(212, 208, 200),
    'seagreen': Color(.180392, .545098, .341176),
    'seashell': Color(1, .960784, .933333),
    'sienna': Color(.627451, .321569, .176471),
    'silver': Color(.752941, .752941, .752941),
    'skyblue': Color(.529412, .807843, .921569),
    'slateblue': Color(.415686, .352941, .803922),
    'slategray': Color(.439216, .501961, .564706),
    'slategrey': Color(.439216, .501961, .564706),
    'snow': Color(1, .980392, .980392),
    'springgreen': Color(0, 1, .498039),
    'steelblue': Color(.27451, .509804, .705882),
    'tan': Color(.823529, .705882, .54902),
    'teal': Color(0, .501961, .501961),
    'thistle': Color(.847059, .74902, .847059),
    'threeddarkshadow': Color(64, 64, 64),
    'threedface': Color(212, 208, 200),
    'threedhighlight': Color(255, 255, 255),
    'threedlightshadow': Color(212, 208, 200),
    'threedshadow': Color(128, 128, 128),
    'tomato': Color(1, .388235, .278431),
    'turquoise': Color(.25098, .878431, .815686),
    'violet': Color(.933333, .509804, .933333),
    'wheat': Color(.960784, .870588, .701961),
    'white': Color(1, 1, 1),
    'whitesmoke': Color(.960784, .960784, .960784),
    'window': Color(255, 255, 255),
    'windowframe': Color(0, 0, 0),
    'windowtext': Color(0, 0, 0),
    'yellow': Color(1, 1, 0),
    'yellowgreen': Color(.603922, .803922, .196078)
}