ancestor: null
releases:
  0.1.0:
    changes:
      minor_changes:
      - facts - now also collecting data about BGP and OSPF (https://github.com/ansible-collections/community.network/pull/101).
      - facts - set configuration export on to verbose, for full configuration export
        (https://github.com/ansible-collections/community.network/pull/104).
      release_summary: 'The ``community.routeros`` continues the work on the Ansible
        RouterOS modules from their state in ``community.network`` 1.2.0. The changes
        listed here are thus relative to the modules ``community.network.routeros_*``.

        '
    fragments:
    - 0.1.0.yml
    - 101_update_facts.yml
    - 104_facts_export_verbose.yml
    release_date: '2020-10-26'
  0.1.1:
    changes:
      bugfixes:
      - api - fix crash when the ``ssl`` parameter is used (https://github.com/ansible-collections/community.routeros/pull/3).
      release_summary: Small improvements and bugfixes over the initial release.
    fragments:
    - 0.1.1.yml
    - 3-api-ssl.yml
    release_date: '2020-10-31'
  1.0.0:
    changes:
      bugfixes:
      - routeros terminal plugin - allow slashes in hostnames for terminal detection.
        Without this, slashes in hostnames will result in connection timeouts (https://github.com/ansible-collections/community.network/pull/138).
      release_summary: 'This is the first production (non-prerelease) release of ``community.routeros``.

        '
    fragments:
    - 1.0.0.yml
    - community.network-138-routeros-allow-slash.yml
    release_date: '2020-11-17'
  1.0.1:
    changes:
      bugfixes:
      - api - remove ``id to .id`` as default requirement which conflicts with RouterOS
        ``id`` configuration parameter (https://github.com/ansible-collections/community.routeros/pull/15).
      release_summary: Maintenance release with a bugfix for ``api``.
    fragments:
    - 1.0.1.yml
    - 13-remove-id-restriction-for-api.yaml
    release_date: '2020-12-11'
  1.1.0:
    changes:
      minor_changes:
      - command - added support for a dash (``-``) in username (https://github.com/ansible-collections/community.routeros/pull/18).
      - facts - added support for a dash (``-``) in username (https://github.com/ansible-collections/community.routeros/pull/18).
      release_summary: This release allow dashes in usernames for SSH-based modules.
    fragments:
    - 1.1.0.yml
    - 18-support-dashes-in-username.yml
    release_date: '2021-01-04'
  1.2.0:
    changes:
      bugfixes:
      - api - when using TLS/SSL, remove explicit cipher configuration to insecure
        values, which also makes it impossible to connect to newer RouterOS versions
        (https://github.com/ansible-collections/community.routeros/pull/34).
      minor_changes:
      - Avoid internal ansible-core module_utils in favor of equivalent public API
        available since at least Ansible 2.9 (https://github.com/ansible-collections/community.routeros/pull/38).
      - api - add options ``validate_certs`` (default value ``true``), ``validate_cert_hostname``
        (default value ``false``), and ``ca_path`` to control certificate validation
        (https://github.com/ansible-collections/community.routeros/pull/37).
      - api - rename option ``ssl`` to ``tls``, and keep the old name as an alias
        (https://github.com/ansible-collections/community.routeros/pull/37).
      - fact - add fact ``ansible_net_config_nonverbose`` to get idempotent config
        (no date, no verbose) (https://github.com/ansible-collections/community.routeros/pull/23).
      release_summary: Bugfix and feature release.
    fragments:
    - 1.2.0.yml
    - 23-idempotent_config.yml
    - 34-api-ciphers.yml
    - 37-api-validate-cert-options.yml
    - ansible-core-_text.yml
    release_date: '2021-06-29'
  2.0.0:
    changes:
      minor_changes:
      - command - the ``commands`` and ``wait_for`` options now convert the list elements
        to strings (https://github.com/ansible-collections/community.routeros/pull/55).
      - facts - the ``gather_subset`` option now converts the list elements to strings
        (https://github.com/ansible-collections/community.routeros/pull/55).
      release_summary: A new major release with breaking changes in the behavior of
        ``community.routeros.api`` and ``community.routeros.command``.
    fragments:
    - 2.0.0.yml
    - 55-linting.yml
    release_date: '2021-10-31'
  2.0.0-a1:
    changes:
      breaking_changes:
      - 'api - due to a programming error, the module never failed on errors. This
        has now been fixed. If you are relying on the module not failing in case of
        idempotent commands (resulting in errors like ``failure: already have such
        address``), you need to adjust your roles/playbooks. We suggest to use ``failed_when``
        to accept failure in specific circumstances, for example ``failed_when: "''failure:
        already have '' in result.msg[0]"`` (https://github.com/ansible-collections/community.routeros/pull/39).'
      release_summary: First prerelease for a new major release with a breaking change
        in the behavior of ``community.routeros.api``.
    fragments:
    - 2.0.0-a1.yml
    - 39-api-fail.yml
    release_date: '2021-07-31'
  2.0.0-a2:
    changes:
      breaking_changes:
      - api - splitting commands no longer uses a naive split by whitespace, but a
        more RouterOS CLI compatible splitting algorithm (https://github.com/ansible-collections/community.routeros/pull/45).
      - command - the module now always indicates that a change happens. If this is
        not correct, please use ``changed_when`` to determine the correct changed
        status for a task (https://github.com/ansible-collections/community.routeros/pull/50).
      bugfixes:
      - api - improve splitting of ``WHERE`` queries (https://github.com/ansible-collections/community.routeros/pull/47).
      - api - when converting result lists to dictionaries, no longer removes second
        ``=`` and text following that if present (https://github.com/ansible-collections/community.routeros/pull/47).
      - routeros cliconf plugin - adjust function signature that was modified in Ansible
        after creation of this plugin (https://github.com/ansible-collections/community.routeros/pull/43).
      minor_changes:
      - api - make validation of ``WHERE`` for ``query`` more strict (https://github.com/ansible-collections/community.routeros/pull/53).
      release_summary: Second prerelease for a new major release with breaking changes
        in the behavior of ``community.routeros.api`` and ``community.routeros.command``.
    fragments:
    - 2.0.0-a2.yml
    - 43-sanity.yml
    - 45-api-split.yml
    - 47-api-split.yml
    - 50-command-changed.yml
    - 53-api-where.yml
    - 53-quoting-filters.yml
    plugins:
      filter:
      - description: Join a list of arguments to a command
        name: join
        namespace: null
      - description: Convert a list of arguments to a list of dictionary
        name: list_to_dict
        namespace: null
      - description: Quote an argument
        name: quote_argument
        namespace: null
      - description: Quote an argument value
        name: quote_argument_value
        namespace: null
      - description: Split a command into arguments
        name: split
        namespace: null
    release_date: '2021-10-14'
  2.1.0:
    changes:
      bugfixes:
      - query - fix query function check for ``.id`` vs. ``id`` arguments to not conflict
        with routeros arguments like ``identity`` (https://github.com/ansible-collections/community.routeros/pull/68,
        https://github.com/ansible-collections/community.routeros/issues/67).
      - quoting and unquoting filter plugins, api module - handle the escape sequence
        ``\_`` correctly as escaping a space and not an underscore (https://github.com/ansible-collections/community.routeros/pull/89).
      minor_changes:
      - Added a ``community.routeros.api`` module defaults group. Use with ``group/community.routeros.api``
        to provide options for all API-based modules (https://github.com/ansible-collections/community.routeros/pull/89).
      - Prepare collection for inclusion in an Execution Environment by declaring
        its dependencies (https://github.com/ansible-collections/community.routeros/pull/83).
      - api - add new option ``extended query`` more complex queries against RouterOS
        API (https://github.com/ansible-collections/community.routeros/pull/63).
      - api - update ``query`` to accept symbolic parameters (https://github.com/ansible-collections/community.routeros/pull/63).
      - api* modules - allow to set an encoding other than the default ASCII for communicating
        with the API (https://github.com/ansible-collections/community.routeros/pull/95).
      release_summary: Feature and bugfix release with new modules.
    fragments:
    - 2.1.0.yml
    - 63-add-extended_query.yml
    - 68-fix-query-id-check.yml
    - 83-ee.yml
    - 89-quoting.yml
    - 90-api-action-group.yml
    - 95-api-encoding.yml
    modules:
    - description: Collect facts from remote devices running MikroTik RouterOS using
        the API
      name: api_facts
      namespace: ''
    - description: Find and modify information using the API
      name: api_find_and_modify
      namespace: ''
    release_date: '2022-05-25'