/* Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#ifndef __LINUX_SENSORS_H_INCLUDED
#define __LINUX_SENSORS_H_INCLUDED

#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/rwsem.h>

#define SENSORS_ACCELERATION_HANDLE		0
#define SENSORS_MAGNETIC_FIELD_HANDLE		1
#define SENSORS_ORIENTATION_HANDLE		2
#define SENSORS_LIGHT_HANDLE			3
#define SENSORS_PROXIMITY_HANDLE		4
#define SENSORS_GYROSCOPE_HANDLE		5
#define SENSORS_PRESSURE_HANDLE			6

#define SENSOR_TYPE_ACCELEROMETER		1
#define SENSOR_TYPE_GEOMAGNETIC_FIELD		2
#define SENSOR_TYPE_MAGNETIC_FIELD  SENSOR_TYPE_GEOMAGNETIC_FIELD
#define SENSOR_TYPE_ORIENTATION			3
#define SENSOR_TYPE_GYROSCOPE			4
#define SENSOR_TYPE_LIGHT			5
#define SENSOR_TYPE_PRESSURE			6
#define SENSOR_TYPE_TEMPERATURE			7
#define SENSOR_TYPE_PROXIMITY			8
#define SENSOR_TYPE_GRAVITY			9
#define SENSOR_TYPE_LINEAR_ACCELERATION		10
#define SENSOR_TYPE_ROTATION_VECTOR		11
#define SENSOR_TYPE_RELATIVE_HUMIDITY		12
#define SENSOR_TYPE_AMBIENT_TEMPERATURE		13
#define SENSOR_TYPE_MAGNETIC_FIELD_UNCALIBRATED	14
#define SENSOR_TYPE_GAME_ROTATION_VECTOR	15
#define SENSOR_TYPE_GYROSCOPE_UNCALIBRATED	16
#define SENSOR_TYPE_SIGNIFICANT_MOTION		17
#define SENSOR_TYPE_STEP_DETECTOR		18
#define SENSOR_TYPE_STEP_COUNTER		19
#define SENSOR_TYPE_GEOMAGNETIC_ROTATION_VECTOR	20

enum LIS3DH_AXIS {
	AXIS_X = 0,
	AXIS_Y,
	AXIS_Z,
	AXIS_XYZ,
};

enum LIS3DH_THRES {
	AXIS_THRESHOLD_H = 0,
	AXIS_THRESHOLD_L,
	AXIS_BIAS,
};

#define AXIS_FACTOR		0
#define AXIS_OFFSET		1


struct cal_result_t {
	union {

		struct {
			int offset_x; /*axis offset of x axis*/
			int offset_y; /*axis offset of x axis*/
			int offset_z; /*axis offset of x axis*/
		};
		struct {
			int threshold_h; /*proximity threshold_h*/
			int threshold_l; /*proximity threshold_l*/
			int bias; /*proximity measure data noise*/
		};
		int offset[3];
	};
	int factor; /*light sensor factor for real ligt strength*/
	int range;
	struct cal_result_t *node;
};

/**
 * struct sensors_classdev - hold the sensor general parameters and APIs
 * @dev:		The device to register.
 * @node:		The list for the all the sensor drivers.
 * @name:		Name of this sensor.
 * @vendor:		The vendor of the hardware part.
 * @handle:		The handle that identifies this sensors.
 * @type:		The sensor type.
 * @max_range:		The maximum range of this sensor's value in SI units.
 * @resolution:		The smallest difference between two values reported by
 *			this sensor.
 * @sensor_power:	The rough estimate of this sensor's power consumption
 *			in mA.
 * @min_delay:		This value depends on the trigger mode:
 *			continuous: minimum period allowed in microseconds
 *			on-change : 0
 *			one-shot :-1
 *			special : 0, unless otherwise noted
 * @fifo_reserved_event_count:	The number of events reserved for this sensor
 *				in the batch mode FIFO.
 * @fifo_max_event_count:	The maximum number of events of this sensor
 *				that could be batched.
 * @max_delay:		The slowest rate the sensor supports in millisecond.
 * @flags:		Should be '1' if the sensor is a wake up sensor.
 *			set it to '0' otherwise.
 * @enabled:		Store the sensor driver enable status.
 * @delay_msec:		Store the sensor driver delay value. The data unit is
 *			millisecond.
 * @wakeup:		Indicate if the wake up interrupt has been enabled.
 * @max_latency:	Max report latency in millisecond
 * @sensors_enable:	The handle for enable and disable sensor.
 * @sensors_poll_delay:	The handle for set the sensor polling delay time.
 * @sensors_set_latency:Set the max report latency of the sensor.
 * @sensors_flush:	Flush sensor events in FIFO and report it to user space.
 * @params		The sensor calibrate string format params up to userspace.
 * @cal_result		The sensor calibrate parameters, cal_result is a struct for sensor.
 */
struct sensors_classdev {
	struct device		*dev;
	struct list_head	node;
	const char		*name;
	const char		*vendor;
	int			version;
	int			handle;
	int			type;
	const char		*max_range;
	const char		*resolution;
	const char		*sensor_power;
	int			min_delay;
	int			fifo_reserved_event_count;
	int			fifo_max_event_count;
	int32_t			max_delay;
	uint32_t		flags;

	unsigned int		enabled;
	unsigned int		delay_msec;
	unsigned int		wakeup;
	unsigned int		max_latency;
	char			*params;
	struct cal_result_t	cal_result;
	/* enable and disable the sensor handle*/
	int	(*sensors_enable)(struct sensors_classdev *sensors_cdev,
					unsigned int enabled);
	int	(*sensors_poll_delay)(struct sensors_classdev *sensors_cdev,
					unsigned int delay_msec);
	int	(*sensors_self_test)(struct sensors_classdev *sensors_cdev);
	int	(*sensors_set_latency)(struct sensors_classdev *sensor_cdev,
					unsigned int max_latency);
	int	(*sensors_enable_wakeup)(struct sensors_classdev *sensor_cdev,
					unsigned int enable);
	int	(*sensors_flush)(struct sensors_classdev *sensors_cdev);
	int	(*sensors_calibrate)(struct sensors_classdev *sensor_cdev,
					int axis, int apply_now);
	int	(*sensors_write_cal_params)(struct sensors_classdev
				*sensor_cdev, struct cal_result_t *cal_result);
};

extern int sensors_classdev_register(struct device *parent,
				 struct sensors_classdev *sensors_cdev);
extern void sensors_classdev_unregister(struct sensors_classdev *sensors_cdev);

#endif		/* __LINUX_SENSORS_H_INCLUDED */