import torch
from functools import reduce
from .optimizer import Optimizer

__all__ = ['LBFGS']

def _cubic_interpolate(x1, f1, g1, x2, f2, g2, bounds=None):
    # ported from https://github.com/torch/optim/blob/master/polyinterp.lua
    # Compute bounds of interpolation area
    if bounds is not None:
        xmin_bound, xmax_bound = bounds
    else:
        xmin_bound, xmax_bound = (x1, x2) if x1 <= x2 else (x2, x1)

    # Code for most common case: cubic interpolation of 2 points
    #   w/ function and derivative values for both
    # Solution in this case (where x2 is the farthest point):
    #   d1 = g1 + g2 - 3*(f1-f2)/(x1-x2);
    #   d2 = sqrt(d1^2 - g1*g2);
    #   min_pos = x2 - (x2 - x1)*((g2 + d2 - d1)/(g2 - g1 + 2*d2));
    #   t_new = min(max(min_pos,xmin_bound),xmax_bound);
    d1 = g1 + g2 - 3 * (f1 - f2) / (x1 - x2)
    d2_square = d1**2 - g1 * g2
    if d2_square >= 0:
        d2 = d2_square.sqrt()
        if x1 <= x2:
            min_pos = x2 - (x2 - x1) * ((g2 + d2 - d1) / (g2 - g1 + 2 * d2))
        else:
            min_pos = x1 - (x1 - x2) * ((g1 + d2 - d1) / (g1 - g2 + 2 * d2))
        return min(max(min_pos, xmin_bound), xmax_bound)
    else:
        return (xmin_bound + xmax_bound) / 2.


def _strong_wolfe(obj_func,
                  x,
                  t,
                  d,
                  f,
                  g,
                  gtd,
                  c1=1e-4,
                  c2=0.9,
                  tolerance_change=1e-9,
                  max_ls=25):
    # ported from https://github.com/torch/optim/blob/master/lswolfe.lua
    d_norm = d.abs().max()
    g = g.clone(memory_format=torch.contiguous_format)
    # evaluate objective and gradient using initial step
    f_new, g_new = obj_func(x, t, d)
    ls_func_evals = 1
    gtd_new = g_new.dot(d)

    # bracket an interval containing a point satisfying the Wolfe criteria
    t_prev, f_prev, g_prev, gtd_prev = 0, f, g, gtd
    done = False
    ls_iter = 0
    while ls_iter < max_ls:
        # check conditions
        if f_new > (f + c1 * t * gtd) or (ls_iter > 1 and f_new >= f_prev):
            bracket = [t_prev, t]
            bracket_f = [f_prev, f_new]
            bracket_g = [g_prev, g_new.clone(memory_format=torch.contiguous_format)]
            bracket_gtd = [gtd_prev, gtd_new]
            break

        if abs(gtd_new) <= -c2 * gtd:
            bracket = [t]
            bracket_f = [f_new]
            bracket_g = [g_new]
            done = True
            break

        if gtd_new >= 0:
            bracket = [t_prev, t]
            bracket_f = [f_prev, f_new]
            bracket_g = [g_prev, g_new.clone(memory_format=torch.contiguous_format)]
            bracket_gtd = [gtd_prev, gtd_new]
            break

        # interpolate
        min_step = t + 0.01 * (t - t_prev)
        max_step = t * 10
        tmp = t
        t = _cubic_interpolate(
            t_prev,
            f_prev,
            gtd_prev,
            t,
            f_new,
            gtd_new,
            bounds=(min_step, max_step))

        # next step
        t_prev = tmp
        f_prev = f_new
        g_prev = g_new.clone(memory_format=torch.contiguous_format)
        gtd_prev = gtd_new
        f_new, g_new = obj_func(x, t, d)
        ls_func_evals += 1
        gtd_new = g_new.dot(d)
        ls_iter += 1

    # reached max number of iterations?
    if ls_iter == max_ls:
        bracket = [0, t]
        bracket_f = [f, f_new]
        bracket_g = [g, g_new]

    # zoom phase: we now have a point satisfying the criteria, or
    # a bracket around it. We refine the bracket until we find the
    # exact point satisfying the criteria
    insuf_progress = False
    # find high and low points in bracket
    low_pos, high_pos = (0, 1) if bracket_f[0] <= bracket_f[-1] else (1, 0)
    while not done and ls_iter < max_ls:
        # line-search bracket is so small
        if abs(bracket[1] - bracket[0]) * d_norm < tolerance_change:
            break

        # compute new trial value
        t = _cubic_interpolate(bracket[0], bracket_f[0], bracket_gtd[0],
                               bracket[1], bracket_f[1], bracket_gtd[1])

        # test that we are making sufficient progress:
        # in case `t` is so close to boundary, we mark that we are making
        # insufficient progress, and if
        #   + we have made insufficient progress in the last step, or
        #   + `t` is at one of the boundary,
        # we will move `t` to a position which is `0.1 * len(bracket)`
        # away from the nearest boundary point.
        eps = 0.1 * (max(bracket) - min(bracket))
        if min(max(bracket) - t, t - min(bracket)) < eps:
            # interpolation close to boundary
            if insuf_progress or t >= max(bracket) or t <= min(bracket):
                # evaluate at 0.1 away from boundary
                if abs(t - max(bracket)) < abs(t - min(bracket)):
                    t = max(bracket) - eps
                else:
                    t = min(bracket) + eps
                insuf_progress = False
            else:
                insuf_progress = True
        else:
            insuf_progress = False

        # Evaluate new point
        f_new, g_new = obj_func(x, t, d)
        ls_func_evals += 1
        gtd_new = g_new.dot(d)
        ls_iter += 1

        if f_new > (f + c1 * t * gtd) or f_new >= bracket_f[low_pos]:
            # Armijo condition not satisfied or not lower than lowest point
            bracket[high_pos] = t
            bracket_f[high_pos] = f_new
            bracket_g[high_pos] = g_new.clone(memory_format=torch.contiguous_format)
            bracket_gtd[high_pos] = gtd_new
            low_pos, high_pos = (0, 1) if bracket_f[0] <= bracket_f[1] else (1, 0)
        else:
            if abs(gtd_new) <= -c2 * gtd:
                # Wolfe conditions satisfied
                done = True
            elif gtd_new * (bracket[high_pos] - bracket[low_pos]) >= 0:
                # old high becomes new low
                bracket[high_pos] = bracket[low_pos]
                bracket_f[high_pos] = bracket_f[low_pos]
                bracket_g[high_pos] = bracket_g[low_pos]
                bracket_gtd[high_pos] = bracket_gtd[low_pos]

            # new point becomes new low
            bracket[low_pos] = t
            bracket_f[low_pos] = f_new
            bracket_g[low_pos] = g_new.clone(memory_format=torch.contiguous_format)
            bracket_gtd[low_pos] = gtd_new

    # return stuff
    t = bracket[low_pos]
    f_new = bracket_f[low_pos]
    g_new = bracket_g[low_pos]
    return f_new, g_new, t, ls_func_evals


class LBFGS(Optimizer):
    """Implements L-BFGS algorithm, heavily inspired by `minFunc
    <https://www.cs.ubc.ca/~schmidtm/Software/minFunc.html>`_.

    .. warning::
        This optimizer doesn't support per-parameter options and parameter
        groups (there can be only one).

    .. warning::
        Right now all parameters have to be on a single device. This will be
        improved in the future.

    .. note::
        This is a very memory intensive optimizer (it requires additional
        ``param_bytes * (history_size + 1)`` bytes). If it doesn't fit in memory
        try reducing the history size, or use a different algorithm.

    Args:
        lr (float): learning rate (default: 1)
        max_iter (int): maximal number of iterations per optimization step
            (default: 20)
        max_eval (int): maximal number of function evaluations per optimization
            step (default: max_iter * 1.25).
        tolerance_grad (float): termination tolerance on first order optimality
            (default: 1e-5).
        tolerance_change (float): termination tolerance on function
            value/parameter changes (default: 1e-9).
        history_size (int): update history size (default: 100).
        line_search_fn (str): either 'strong_wolfe' or None (default: None).
    """

    def __init__(self,
                 params,
                 lr=1,
                 max_iter=20,
                 max_eval=None,
                 tolerance_grad=1e-7,
                 tolerance_change=1e-9,
                 history_size=100,
                 line_search_fn=None):
        if max_eval is None:
            max_eval = max_iter * 5 // 4
        defaults = dict(
            lr=lr,
            max_iter=max_iter,
            max_eval=max_eval,
            tolerance_grad=tolerance_grad,
            tolerance_change=tolerance_change,
            history_size=history_size,
            line_search_fn=line_search_fn)
        super().__init__(params, defaults)

        if len(self.param_groups) != 1:
            raise ValueError("LBFGS doesn't support per-parameter options "
                             "(parameter groups)")

        self._params = self.param_groups[0]['params']
        self._numel_cache = None

    def _numel(self):
        if self._numel_cache is None:
            self._numel_cache = reduce(lambda total, p: total + p.numel(), self._params, 0)
        return self._numel_cache

    def _gather_flat_grad(self):
        views = []
        for p in self._params:
            if p.grad is None:
                view = p.new(p.numel()).zero_()
            elif p.grad.is_sparse:
                view = p.grad.to_dense().view(-1)
            else:
                view = p.grad.view(-1)
            views.append(view)
        return torch.cat(views, 0)

    def _add_grad(self, step_size, update):
        offset = 0
        for p in self._params:
            numel = p.numel()
            # view as to avoid deprecated pointwise semantics
            p.add_(update[offset:offset + numel].view_as(p), alpha=step_size)
            offset += numel
        assert offset == self._numel()

    def _clone_param(self):
        return [p.clone(memory_format=torch.contiguous_format) for p in self._params]

    def _set_param(self, params_data):
        for p, pdata in zip(self._params, params_data):
            p.copy_(pdata)

    def _directional_evaluate(self, closure, x, t, d):
        self._add_grad(t, d)
        loss = float(closure())
        flat_grad = self._gather_flat_grad()
        self._set_param(x)
        return loss, flat_grad

    @torch.no_grad()
    def step(self, closure):
        """Performs a single optimization step.

        Args:
            closure (Callable): A closure that reevaluates the model
                and returns the loss.
        """
        assert len(self.param_groups) == 1

        # Make sure the closure is always called with grad enabled
        closure = torch.enable_grad()(closure)

        group = self.param_groups[0]
        lr = group['lr']
        max_iter = group['max_iter']
        max_eval = group['max_eval']
        tolerance_grad = group['tolerance_grad']
        tolerance_change = group['tolerance_change']
        line_search_fn = group['line_search_fn']
        history_size = group['history_size']

        # NOTE: LBFGS has only global state, but we register it as state for
        # the first param, because this helps with casting in load_state_dict
        state = self.state[self._params[0]]
        state.setdefault('func_evals', 0)
        state.setdefault('n_iter', 0)

        # evaluate initial f(x) and df/dx
        orig_loss = closure()
        loss = float(orig_loss)
        current_evals = 1
        state['func_evals'] += 1

        flat_grad = self._gather_flat_grad()
        opt_cond = flat_grad.abs().max() <= tolerance_grad

        # optimal condition
        if opt_cond:
            return orig_loss

        # tensors cached in state (for tracing)
        d = state.get('d')
        t = state.get('t')
        old_dirs = state.get('old_dirs')
        old_stps = state.get('old_stps')
        ro = state.get('ro')
        H_diag = state.get('H_diag')
        prev_flat_grad = state.get('prev_flat_grad')
        prev_loss = state.get('prev_loss')

        n_iter = 0
        # optimize for a max of max_iter iterations
        while n_iter < max_iter:
            # keep track of nb of iterations
            n_iter += 1
            state['n_iter'] += 1

            ############################################################
            # compute gradient descent direction
            ############################################################
            if state['n_iter'] == 1:
                d = flat_grad.neg()